I cannot connect to a Deskjet 3070A from Ubuntu 1204 or Ubuntu 10.10

I have been trying to set up a wireless printer.
I can print to the printer when it is attached via the USB cable but it loses all connection as soon as the cable is unplugged.
I installed the latest version of HPLIP 3.12.4 on both PCs but it is unable to find the printer as a wireless device when trying the setup with the USB cable plugged in on either PC.
I cannot configure the printer via WPS because my router a PLUSCOM WR-AR2317 doesn't have a WPS button and if I try to add a PIN there is nowhere in the router homepage (192.168.1.1) for me to add in a PIN.
I have printed off the Network config page and it shows that it has discoveded my home network but the wireless capability seems to not work at all, even though it says wireless is switched on.
The wireless blue light only flashes, there is no solid, always on light. I have had the printer about a metre away from the wireless router and it still doesn't seem to connect at all.
I have run hp-check and the output is below
carole@carole-desktop:~$ hp-check -t
HP Linux Imaging and Printing System (ver. 3.12.4)
Dependency/Version Check Utility ver. 14.3
Copyright (c) 2001-14 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or
.run) to determine if the proper dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or
an already built HPLIP supplied tarball has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases
(both compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
| SYSTEM INFO |
Basic system information:
Linux carole-desktop 3.0.0-15-generic #26-Ubuntu SMP Fri Jan 20 17:23:00 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux
Distribution:
ubuntu 12.04
Checking Python version...
OK, version 2.7.3 installed
Checking PyQt 4.x version...
OK, version 4.9.1 installed.
Checking for CUPS...
Status: scheduler is running
Version: 1.5.3
error_log is set to level: warn
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 1.0.0
| COMPILE AND RUNTIME DEPENDENCIES |
note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
Checking for dependency: CUPS - Common Unix Printing System...
OK, found.
Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.
Checking for dependency: CUPS image - CUPS image development files...
OK, found.
Checking for dependency: DBus - Message bus system...
OK, found.
Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.
Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.
Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.
Checking for dependency: libjpeg - JPEG library...
OK, found.
Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.
Checking for dependency: libpthread - POSIX threads library...
OK, found.
Checking for dependency: libtool - Library building support services...
OK, found.
Checking for dependency: libusb - USB library...
OK, found.
Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.
Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.
Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.
Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.
Checking for dependency: Python devel - Python development files...
OK, found.
Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.
Checking for dependency: Python XML libraries...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
OK, found.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: SANE - Scanning library development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
To install this dependency, execute this command:
sudo apt-get install --assume-yes libsane-dev
Checking for dependency: scanimage - Shell scanning program...
OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.
| HPLIP INSTALLATION |
Currently installed HPLIP version...
HPLIP 3.12.4 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.12.4
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.12.4
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=no
gui-build=yes
scanner-build=no
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.12.4
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.
[plugin]
installed=0
eula=0
Current contents of '~/.hplip/hplip.conf' file:
[settings]
systray_visible = 0
systray_messages = 0
[last_used]
device_uri = "hp:/usb/Deskjet_3070_B611_series?serial=CN1AH4333905MQ"
printer_name = Photosmart_C4200_series
working_dir = .
[commands]
scan = /usr/bin/simple-scan %SANE_URI%
[refresh]
rate = 30
enable = false
type = 1
[polling]
enable = false
interval = 5
device_list =
[fax]
voice_phone =
email_address =
[installation]
date_time = 10/06/12 17:16:33
version = 3.12.4
[upgrade]
notify_upgrade = true
last_upgraded_time = 1339337816
pending_upgrade_time = 0
latest_available_version = 3.12.4
| DISCOVERED USB DEVICES |
Device URI                                      Model
hp:/usb/Photosmart_C4200_series?serial=MY82SQQ HP Photosmart C4200 series
2RT04VP
| INSTALLED CUPS PRINTER QUEUES |
Deskjet_3070_B611
Type: Printer
Device URI: hp:/usb/Deskjet_3070_B611_series?serial=CN1AH4333905MQ
PPD: /etc/cups/ppd/Deskjet_3070_B611.ppd
PPD Description: HP Deskjet 3070 b611 Series, hpcups 3.12.2
Printer /usr/lib/cups/backend/hp failed11 is idle. enabled since Sun 10 Jun 2012 17:15:07 BST
error: Unable to communicate with device (code=12): hp:/usb/Deskjet_3070_B611_series?serial=CN1AH4333905MQ
error: Device not found
error: Communication status: Failed
Photosmart_C4200_series
Type: Printer
Device URI: hp:/usb/Photosmart_C4200_series?serial=MY82SQQ2RT04VP
PPD: /etc/cups/ppd/Photosmart_C4200_series.ppd
PPD Description: HP Photosmart c4200 Series, hpcups 3.12.2
Printer status: printer Photosmart_C4200_series is idle. enabled since Wed 21 Dec 2011 17:43:25 GMT
Communication status: Good
| PYTHON EXTENSIONS |
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
| USB I/O SETUP |
Checking for permissions of USB attached printers...
HP Device 0x5c11 at 001:003:
    Device URI: hp:/usb/Photosmart_C4200_series?serial=MY82SQQ2RT04VP
    Device node: /dev/bus/usb/001/003
    Mode: 0664
getfacl: Removing leading '/' from absolute path names
# file: dev/bus/usb/001/003
# owner: root
# group: lp
user::rw-
user:carole:rw-
group::rw-
mask::rw-
other::r--
| USER GROUPS |
carole adm lp dialout cdrom floppy audio dip video plugdev scanner lpadmin admin netdev powerdev
| SUMMARY |
error: 2 errors and/or warnings.
Summary of needed commands to run to satisfy missing dependencies:
sudo apt-get install --assume-yes libsane-dev
Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html
Done.
carole@carole-desktop:~$

The Deskjet series printers connect to wireless networks with what is called USB to Wireless.
You will need a supported operating system to connect a Deskjet to a wireless network. Supported operating systems to connect the printer to a wireless network are Windows 7 (32bit and 64bit), Windows Vista (32bit and 64bit), and Mac OS X (10.5, 10.6, and 10.7).
While there is a software download option for Linux distributions, this is not the full featured software that is capable of adding the printer to a wireless network. Most printers have a wireless setup wizard to accomplish this task, but the Deskjet series printers connect in a different way.
Once the printer is connected to a wireless network, HPLIP 3.12.4 drivers should be able to locate the printer.
Click on Installing the Product Software for a Wireless Network Connection to receive instructions to connect to a wireless network using Windows and Mac operating systems.
Click on Software & Driver Downloads - HP Deskjet 3070A e-All-in-One Printer - B611a to download the appropriate software for a supported operating system to connect to a wireless network.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

Cannot connect to the iTunes Store from my home network since I upgraded to ios 6

I own an iPad 2 and recently upgraded to ios 6. Since then, I cannot connect to the iTunes store from my home network. I can navigate any other site and access any other application. I can even reach the iTunes store through My Personal Hotspot and through my office network.
Has anyone experienced something similar? My network carrier is Telmex and I know for sure, they block port 25. Any guess on whether there could be a setting impeding connection?
Help!!!

Hi Nickey,
If you are having difficulty connecting to the iTunes store from your PC there are a number of things you can try to get connected again. Details are available in this article -
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
I see you have already checked to make sure your system and other software is up to date, but there are plenty of ways to continue from there.
Thanks for using Apple Support Communities.
Best,
Brett L

HT204003 if i open passbook on iphone 5, it always say cannot connect to itunes, any fix from apple tech support? and whats the reason for this problem? why do we have to figure it out and not even apple can give answer??

if i open passbook on iphone 5, it always say cannot connect to itunes, any fix from apple tech support? and whats the reason for this problem? why do we have to figure it out and not even apple can give answer??

actually i found out how to fix it
1 sign out of apple account
2 close down passbook app
3 change year to 2013
4 reopen passbook and sign in at the button with your apple ID
5 change the time to auto update and it should work from now on.
this worked for me let me know if it work for you:)

Cannot connect to iBookstore on iTunes from ipad

Cannot connect to iBookstore on iTunes from my iPad even though a couple of weeks ago everything was fine.
If anyone had a similar problem and was able to resolve it I would appreciate a feedback.
I tried resetting the iPad as well as the router but nothing seems to work.

Try closing all of the apps in the recents tray on your iPad, reboot again and then try the iBooks Store again
Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Keep swiping in the recents tray until you close all of the apps. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

How to wake up HP Deskjet 3070A from standby-mode?

Does anybody know how to wake up the HP Deskjet 3070A by sending a print job from a (wirelessly connected) laptop when the printer (has been idle for a certain amount of time and) went in standby-mode?
Can the standby time be configured (how can I make the printer enter the sleep/standby mode after a specific time span)?
Thanks for your help!

Nobody an idea?

Cannot connect to ag-sql-listener from Secondary Server

Greetings,
I have a Azure VM setup with two SQLs SQL1 and SQL2, they run a High Availability setup with SQL-AG-Listener as the listener name.
My problem is currently is that if I have SQL1 as Primary, when I'm logged into SQL2 I can't use the SQL-AG-Listener as target to get the Primary server. However I can do a connection to SQL1 directly.
On the Primary server I can however use the SQL-AG-Listener and will get the local server as expected.
The SQL-AG-Listener works perfectly from outside the local network of Azure.
===================================
Cannot connect to ag-sql-listener.
===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
===================================
I don't know what else I can try and do now. I have run through most of the issue handling as I can, all from Opening all ports to and from both the SQL servers on the domain level. Made sure that named pipes, TCP/IP connections on both SQL servers was enabled.
As I can run towards them from the outside, and can connect to them directly on name from the SQL servers themselves, then I know that they can take remote access.
Any idea on what I might be missing would be welcome.

Yes, I know I had a typo in the above, where the ag-sql-listener was typed wrong.. It was ofcause SQL-AG-Listener.
But it is still a problem. I don't know if there are some DNS things that can be done, as it seems this is a problem from within the same subnet and not from outside.

Cannot connect to Soulseek after restore from disk

I made a backup of my disk, then changed disk and restored all my files.
Now i cannot connect to Soulseek, not with iSoul 0.3, which worked great before, not with iSoul 0.5, not with other Soulseek clients.
Little Snitch is turned off, must be a network setting/preference?
Can anyone help? I have an iMac Intel, 10.8.3.

thank you, i will try this.
in the meantime, here's my log on soulseek when selecting "Connect to Soulseek" from the menu
2013-04-23 08:51:58.488 iSoul[831:c07] -[MainWindowController connectOrDisconnect:] [Line 565] attempting to connect to museekd
2013-04-23 08:51:58.488 iSoul[831:c07] -[iSoul_AppDelegate connectToMuseekd:] [Line 339] connecting to internal museekd daemon
2013-04-23 08:51:58.489 iSoul[831:c07] -[MainWindowController portMapperDidStartWork:] [Line 490] starting UPNP port mapping
2013-04-23 08:51:58.503 iSoul[831:c07] error in input stream, disconnecting. (Error Domain=NSPOSIXErrorDomain Code=61 "The operation couldn’t be completed. Connection refused")
2013-04-23 08:51:58.505 iSoul[831:6883] UPnP: 0 TCP 20363->192.168.1.4:20363 'c6c38c.cPM.iSoul.d93d8f58598c33b7' ''
2013-04-23 08:51:58.512 iSoul[831:c07] error in output stream, disconnecting. (Error Domain=NSPOSIXErrorDomain Code=61 "The operation couldn’t be completed. Connection refused")
2013-04-23 08:51:58.515 iSoul[831:5e13] UPnP: 0 TCP 20363->192.168.1.4:20363 'c6c38c.cPM.iSoul.d93d8f58598c33b7' ''
2013-04-23 08:52:00.523 iSoul[831:6893] UPnP: YES -r----d host:http://192.168.1.254:80/upnp/IGD.xml st:urn:schemas-upnp-org:device:InternetGatewayDevice:1
2013-04-23 08:52:00.523 iSoul[831:6893] UPnP: trying URL:http://192.168.1.254:80/upnp/IGD.xml
2013-04-23 08:52:00.573 iSoul[831:6897] UPnP: 0 TCP 20363->192.168.1.4:20363 'c6c38c.cPM.iSoul.d93d8f58598c33b7' ''
2013-04-23 08:52:00.585 iSoul[831:6897] UPnP: 1 TCP 44822->192.168.1.4:44822 'Torque (TCP)' ''
2013-04-23 08:52:00.598 iSoul[831:6897] UPnP: 2 UDP 4500->192.168.1.4:4500 'iC4500' ''
2013-04-23 08:52:00.612 iSoul[831:6897] UPnP: 3 UDP 4501->192.168.1.66:4500 'iC4501' ''
2013-04-23 08:52:00.625 iSoul[831:6897] UPnP: 4 UDP 5353->192.168.1.4:5353 'iC5353' ''
2013-04-23 08:52:00.641 iSoul[831:6897] UPnP: 5 UDP 5354->192.168.1.66:5353 'iC5354' ''
2013-04-23 08:52:00.655 iSoul[831:6897] UPnP: 6 UDP 44822->192.168.1.4:44822 'Torque (UDP)' ''
2013-04-23 08:52:02.244 iSoul[831:c07] -[MainWindowController portMapperDidFinishWork:] [Line 499] UPNP successfully mapped ports

Getting "cannot connect to iTunes store error from one appleID but another works fine

I have 2 apple ID's, a personal one, and one that me and a couple of coworkers share so that we can share apps we purchase. I cannot log into the shared AppleID from my ipad. I can from my PC so I know it is not an incorrect password or anything like that. I get the error "cannot connect to iTunes Store". Is this because too many of us are logged into the same apple ID at once? I tried changing the password so that it would kick everyone else off, but even with a new password I get the error. I am able to login with my personal apple ID just fine, so I know it's not an issue with my wifi or my ipad software (i don't think). anyone else experienced this and found a solution?

Hello 66ladybird88,
I understand you are trying to access the iTunes Store on your Windows computer but are getting an alert with the number 0x80092013. There is an article that address this kind of alert and has some great troubleshooting steps for resolution. I understand the alert in the article is slightly different than the one you are getting but I recommend the same steps listed.
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123
Resolution
The cause for these issues is a program that monitors the Winsock protocol for Windows conflicting with Apple software. These programs usually use a Layered Service Provider (LSP) that can help identify the particular program installed. The programs that monitor this protocol have a variety of purposes, including security software, content filtering, and optimization of network traffic.
Thanks for reaching out,
-Joe

I cannot connect to the itunes store from my PC

For some reason, starting about 2 months ago, I can no longer connect to the iTunes store from my PC. Does anyone have any idea why this would occur?
Obviously all my internet connections are fine and it is not a firewall or filter issue.

Could you walk us through what happens (when you try to connect to the Store) in some more detail, please?

Cannot connect to the iTune Store from within iTunes.

Can not connect to the iTunes Store from within the iTunes program on my PC. Using iTunes 10.4 on a XP Sp3 system. Everything worked fine until a few days ago. Now the iTunes Store (Store) will not open. Tried rollback, disabling firewall, anti-virus etc. Not working. iTUnes Diagnostic says I can connect to the net but the screen remains blank, except "No connection to firmware update server" is listed in the Diagnostic.

Yes, I am running AVG Anti-Virus Free and was using Comodo Firewall. Uninstalled everything, iTunes Store still would not appear. Now using AVG and Windows Firewall, still can not get Store to come up. Diagnostic follows:
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
GATEWAY 831GM
iTunes 10.4.0.80
QuickTime 7.7
FairPlay 1.12.20
Apple Application Support 2.0.1
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.2 (333.2)
Gracenote SDK 1.9.1.485
Gracenote MusicID 1.9.1.102
Gracenote Submit 1.9.1.133
Gracenote DSP 1.9.1.43
iTunes Serial Number 0012ABA010AA0F38
Current user is an administrator.
The current local date and time is 2011-08-16 18:21:15.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
ATI Radeon HD 3400 Series
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.4.0.80 is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {11221FB9-2BC2-4E8D-A170-06A6BEBCCB07}
Description:          Intel(R) PRO/100 VE Network Connection - Packet Scheduler Miniport
IP Address:          192.168.0.103
Subnet Mask:          255.255.255.0
Default Gateway:          192.168.0.1
DHCP Enabled:          Yes
DHCP Server:          192.168.0.1
Lease Obtained:          Tue Aug 16 17:24:27 2011
Lease Expires:          Tue Aug 23 17:24:27 2011
DNS Servers:          192.168.0.1
Active Connection:          LAN Connection
Connected:          Yes
Online:                    Yes
Using Modem:          No
Using LAN:          Yes
Using Proxy:          No
SSL 3.0 Support:          Enabled
TLS 1.0 Support:          Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-08-16 18:19:43.
Ran another test today an hour or so ago, same result except "Connection attempt to firmware up......" failed.

Lync 2013 - Office 32 bit cannot connect when attemtping to share from preset Outlook Meeting

I have Office 2013 32 bit version installed on my computer running Win7. I cannot use 64 bit as another software that I run will not work with 64 bit.
When I set up a meeting in Outlook 2013, and set it as a Lync Meeting, I can start the meeting and people can call in and connect. When I attempt to share my desktop or monitor or anything, it does not connect to allow me to share. If others in the meeting
attempt to share their desktop, the same happens. I get a Connecting Icon at the top of the screen and then eventually a message that says cannot connect to the server. This happens everytime, I try to do a Lync meeting this way.
If I call someone with Lync and Share my desktop or monitor, I am able to share with no issues.
I have tried, uninstalling and reinstalling Lync. I have tried to install latest updates. I have tried to repair office. None of these work.
Others in our office with the same set up do not have this issue.
Any ideas how to resolve this?
Dave

Hi,
It may cause by the issue of the FE server MCU, please double check if MCU on FE server works well, when two participants are connected, the session is essentially peer-to-peer. When three or more participants are connected, the desktop
Sharing feature depends on the Front End Server Multi Point Control Unit (MCU) to provide the sharing stream to all parties.
Please check if port 5065/TCP is available on Front End server.
Please also troubleshooting with the help of Recommended Steps
part in the link below:
http://blogs.technet.com/b/nexthop/archive/2012/11/05/lyncmd-troubleshooting-lync-server-2010-application-sharing-internal-and-remote-scenarios.aspx
Eason Huang
TechNet Community Support

Cannot connect to the iTunes store from iPad

Helllo.I have a problems on my IPad .When I wanted to download the videos or even just open the ITunes its says cannot connect to the iTunes store.And I know for sure that my iPad is connected to the Internet .What can I do?

Can you use other apps that access the internet e.g. Safari ? If you can then try logging out of your account on the iPad by tapping on your id in Settings > Store and then log back in and see if it then works.

Cannot connect to itunes store msg from ipad for past 10 days

I have been trying for over a week to connect to itunes to update my aps. I keep getting msg saying "cannot connect to itunes". no error msg other than that. I have most current version loaded, i have tried connecting thru wireless at home, at office and on 3G. Same msg everywhere. I have turned off ipad, waited and turned back on. I have synced ipad and laptop. I have changed password several times. No problem using Safari, no problem using aps installed, just can't get to itunes to update them. any suggestions would be greatly appreciated. oh, I have also read everything Apple has on their support links also.

Could be many things... Software up to date? Disabled your anti virus software? Turned off the Firewall? Your internet connection...
Try here > Can't connect to the iTunes Store
And here > iTunes for Windows: Network Connectivity Tests

Cannot connect to the iTunes store from iPhone

I'm connected to WI-FI. When I touch the iTunes election button, a the above subject message appears. I used the same phone as my previous T-mobile number. I am able to make a call now from my iPhone. It has been less than 24 hours. Cannot locate any doc to help me to get a solution.

Hey coolgem,
Can you browse web pages using Safari?
What is the iPhones IP address? Goto Settings>Wi-Fi>Click the blue(>) next to your network.
This article has some general Wi-Fi tips
http://docs.info.apple.com/article.html?artnum=305715
Jason

Cannot connect to Oracle 11gR2 database from SQL Server 2005

Both SQL Server (Windows) and Oracle (Linux) are in 64bit environments.
I have done the following on a Windows 2008 R2 with SQL Server 2005:
Install InstantClient from Oracle Database 11g Release 2 Client (11.2.0.1.0) for Microsoft Windows (x64) to C:\Oracle
Install oledb from 64-bit ODAC 11.2 Release 3 (11.2.0.2.1) for Windows x64 by executing install.bat oledb c:\oracle odac
Note: Not sure whether 11.2.0.2.1 version of ODAC will cause any problem since I cannot find 11.2.0.1.0 version.
I have checked the Allow inprocess of OraOLEDB.Oracle provider in SSMS.
I have executed sp_addlinkedserver @server = 'ORACLE_TEST', @srvproduct = 'Oracle', @provider = 'OraOLEDB.Oracle', @datasrc = '##.##.##.##:1521/TEST'
The ##.##.##.## is the ip address of the Linux server which has the Oracle 11gR2 database TEST.
I have executed sp_addlinkedsrvlogin @rmtsrvname = 'ORACLE_TEST', @useself = 'FALSE', @rmtuser = 'xxxx', @rmtpassword = 'yyyy'
The xxxx is the oracle username and yyyy is the password for the oracle user xxxx.
I know the oracle database TEST is up since I have setup connection in Oracle SQL Developer having:
##.##.##.## as the hostname
1521 as the Port
xxxx as the username
yyyy as the password
TEST as the service name
When I click Test Connection for the linked server ORACLE_TEST in SSMS, it just hang.
When I issue a query like select count(*) from oracle_test..xxxx.table1, it just run forever. I'm not so sure how to query an oracle table. I have also tried select count(*) from oracle_test.xxxx.xxxx.table1.
When I retype the password in the Linked Server Properties, it just run forever.
Do I need to create a tnsnames.ora on the Windows machine?
Do I need to change the tnsnames.ora on Linux machine?
I'm very new to Oracle.

This forum is dealing with connections from an Oracle database to SQL Server - so the Oracle database is the driving site and this is the way round from your linked server set up.
As you're suing the instant client you might post your issue in the instant client forum:
Instant Client

I cannot connect to a Deskjet 3070A from Ubuntu 1204 or Ubuntu 10.10

Similar Messages

Maybe you are looking for