I cannot connect to att...the diagnostics shows that the airport extreme is connected to the web...

I cannot connect to the web (att) via Airport Extreme...the diagnostics sees nothing wrong with the system

Since the Speedstream is a router, you would want to make sure that the AirPort Exteme is in Bridge Mode. In addition, check to be sure that the Ethernet cable from the Speedstream is connected to the WAN port (circle of dots icon) on the AirPort Extreme.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click Manual Setup
Click the Internet icon
Settings should look like this:
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Update to save settings and give the AirPort Extreme 25-30 seconds to restart
Then power cycle the entire network by powering everything off, order is not important
Start the Speedstream first and let it run a moment
Then start the AirPort Exteme the same way
Start each device one at a time the same way
Check for propoer operation

Similar Messages

Hi all! I was updating the software on i pad to ios6, update was interrupted(apple update server is unavailable...). iTunes Diagnostics shows that "secure link to I tunes store failed". I use Windows 7 Home Premium 64 bit. Can anybody help please?

Hi all! I was updating the software on i pad to ios6, update was interrupted(apple update server is unavailable...). iTunes Diagnostics shows that "secure link to I tunes store failed". I use Windows 7 Home Premium 64 bit. Can anybody help please?
The following was done so far:
1. Windows Firewall - new rule created for itunes.
2. iTunes - latest version installed.
3. LAN setting : automatic detection of proxy is enabled;
4. iTunes diagnostics shows:
Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
TOSHIBA Satellite L655
iTunes 11.0.2.26
QuickTime 7.7.3
FairPlay 2.3.31
Apple Application Support 2.3.3
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.1.0.13
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 003FB880034B7720
Current user is not an administrator.
The current local date and time is 2013-04-23 11:01:14.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.0.2.26 (x64) is currently running.
iTunesHelper 11.0.2.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {1CB5BBC2-8124-4664-899A-CE0A4683E3B4}
Description:          Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Thu Jan 01 08:00:00 1970
Lease Expires:          Thu Jan 01 08:00:00 1970
DNS Servers:
Adapter Name:          {8140112A-43D0-41D6-8B36-BE146C811173}
Description:          Atheros AR8152/8158 PCI-E Fast Ethernet Controller (NDIS 6.20)
IP Address:          10.5.7.196
Subnet Mask:          255.255.0.0
Default Gateway:          10.5.0.1
DHCP Enabled:          Yes
DHCP Server:          172.18.255.2
Lease Obtained:          Tue Apr 23 10:14:40 2013
Lease Expires:          Tue Apr 23 22:14:40 2013
DNS Servers:          121.97.59.7
                    121.97.59.2
                    121.97.59.3
Active Connection:          LAN Connection
Connected:          Yes
Online:                    Yes
Using Modem:          No
Using LAN:          Yes
Using Proxy:          No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was unsuccessful.
The network connection timed out.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
Last successful iTunes Store access was 2013-03-22 10:05:31.
@@@. iTunes IS ENABLED THROUGH THE FIREWALL , even though diagnostics says "NOT enabled"

hours after the first post i somehow got this to work. dont know how, but i do tried the dns clear cache, the clear host file, oh and i did the check automatically detech dns AND THEN se-check it again before i got this to work.

The form cannot be submitted to the Web server either because your computer is offline or because the host server is currently unavailabl. If this problem persists, contact your network administrator.

Hi,
When the page is submitted for approval by using SharePoint OOTB Page Approval Workflow, it takes quite long time and prompt error message as below.
"The form cannot be submitted to the Web server either because your computer is offline or because the host server is currently unavailable.
If this problem persists, contact your network administrator."
It only happens in Internet Explorer version 8 and 9. IE version below 8 is not used in environment.
But it is working in Firefox.
Please help me on how to fix this issue.
Thanks.

Hi Htet,
Here are some articles with the same issue message, you can check the setting of Link Translation rule in the ISA from below.
http://sharepointontop.blogspot.com/2012/06/form-cannot-be-submitted-to-web-server.html
http://bytelab.blogspot.com/2008/03/problem-submitting-infopath-forms-using.html
http://social.msdn.microsoft.com/forums/en-IE/sharepointcustomizationprevious/thread/84be34b3-b806-49ce-a5c2-b5ad8a1ff09f
Thanks
Daniel Yang
TechNet Community Support

Error occurred in deployment step 'Activate Features': Feature 'myfeature guid' is Site-scoped, and cannot be added to the Web.

Error occurred in deployment step 'Activate Features': Feature 'e3d788e6-994d-446c-afbb-25ecf9907aeb' is Site-scoped, and cannot be added to the Web.
========== Build: 1 succeeded, 0 failed, 1 up-to-date, 0 skipped ==========
========== Deploy: 0 succeeded, 1 failed, 0 skipped ==========
Hi,
I have added a new eb part in my already existing SP solution. but when I added 2 new web parts into this solution and trying to depoy the same, am getting this error.
can anybody pls help what am missing.
the below is my feature manifest:
<Feature xmlns="http://schemas.microsoft.com/sharepoint/" Title="BApprove_Feature" Id="e3d788e6-994d-446c-afbb-25ecf9907aeb" Scope="Site"></Feature>
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/" >
<Module Name="BApprove" List="113" Url="_catalogs/wp">
<File Path="BApprove\BApprove.webpart" Url="BApprove.webpart" Type="GhostableInLibrary" >
<Property Name="Group" Value="Custom" />
</File>
</Module>
</Elements>

Hi SamolPP,
Did you already have a look at following similar post?
https://social.technet.microsoft.com/Forums/sharepoint/en-US/a2af97c8-62db-4194-9fc5-cce6bc7e5d71/content-deployment-error-feature-is-site-scoped-and-cannot-be-added-to-the-web
Hope this helps

CR 2008 dependence files cannot be found during the web setup project build

Hi,
Please anyone who knows why dependence files cannot be found?
CR 2008 dependence files cannot be found during the web setup project build. Nevertheless, this problem did not prevent the project from being installed on the server but I need to know why it couldn't be found? while I'm having the latest service packs installed on my development machine (SP0, SP1, SP-Fix 1, 2, 3 and 4 including ClickOnce and Merge Modules).
The warning messages that I'm getting during the web setup project build.
Build started: Project: VMAComponentsLibrary, Configuration: Debug Any CPU
Starting pre-build validation for project 'VMASetup'
WARNING: Unable to find module dependency with signature 'MFCLOC.74FD3CE6_2A8D_0E9C_FF1F_C8B3B9A1E18E'
WARNING: Unable to find module dependency with signature 'ATL.Policy.66332652_9C28_58B1_FF1F_C8B3B9A1E18E'
WARNING: Unable to find module dependency with signature 'OpenMP.Policy.04B9F3B6_9645_7658_FF1F_C8B3B9A1E18E'
WARNING: Unable to find module dependency with signature 'MFCLOC.Policy.D2730D3F_3C41_5884_FF1F_C8B3B9A1E18E'
WARNING: Unable to find module dependency with signature 'ATL.97F81AF1_0E47_DC99_FF1F_C8B3B9A1E18E'
WARNING: Unable to find module dependency with signature 'CRT.Policy.63E949F6_03BC_5C40_FF1F_C8B3B9A1E18E'
WARNING: Unable to find module dependency with signature 'MFC.Policy.68B7C6D9_1DF2_54C1_FF1F_C8B3B9A1E18E'
WARNING: Unable to find module dependency with signature 'MFC.9BAE13A2_E7AF_D6C3_FF1F_C8B3B9A1E18E'
WARNING: Unable to find module dependency with signature 'CRT.98CB24AD_52FB_DB5F_FF1F_C8B3B9A1E18E'
WARNING: Unable to find module dependency with signature 'OpenMP.1E507087_0819_45E0_FF1F_C8B3B9A1E18E'
Pre-build validation for project 'VMASetup' completed
Thank you.

Hi,
CR 2008 for VS has a merge module that will be copied to the C:\Program Files\Common Files\Merge Modules for example (CRRuntime_12_1.msm, CRRuntime_12_1_da.msm, CRRuntime_12_1_de.msm, u2026).
According to CR documentation in order to deploy a project which uses a crystal reports we have to including one or more of these files in the setup project (Merge Modules).
As I understand these files can help the setup project to know which dependence files are needed for the application to be deployed successfully with CR.
You mentioned
(The merge modules for Crystal Reports 2008 SP1 are dependent on the C++ library files from 2005 SP1.) I understood the above message.
But what did you mean by this? What are the merge modules that you are mentioning hear?
(I know this isn't what you want to hear but the merge modules just aren't available any other way. Microsoft doesn't have them available for download, and we are not permitted to make them available.)
Thanks.
Edited by: Sami Aljafer on Jun 15, 2009 9:37 PM

Since installing Mountain Lion I cannot open videos on the web?

Since installing Mountain Lion on my iMac, I cannot open videos on the web?

Same problem here. I need to use firefox rather than safari.

I cannot get sound from the web, you tube, etc, however, my speakers are on, my itunes play sound?

I cannot get sound from the web, you tube, etc, however, my speakers are on and my itunes play sound? What gives?

Hi,
Try the following.
First, download the Flash uninstall utility on the link below and save it to your Desktop.
Flash Player Uninstaller.
When the download has completed, close all browser windows and run the uninstaller. After this has completed, restart the notebook.
Next, download and install Firefox and then using Firefox, download and install the latest version of Adobe Flash.
Close all browser windows before running the Flash installer.
Launch Firefox and see if Youtube videos etc play Ok - if they do, close Firefox, open IE and click on the same Adobe Flash link above to get a prompt to install the ActiveX component. When done, restart IE.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Cannot connect to sever web sites.

I am running multiple services with the latest version of OS X 10.6 Server on my MacMini (web, mail, ichat, address book, etc.) . When I try to open my websites I get an "unable to find sever message". Everything has been working fine for the last 2 years and no changes have been made to the server settings, ISP, or DNS. All other services are working as they should. The server is hooked up to an Airport Extreme via a cable modem with a static IP. I have tried the following thus far:
1) restarted the server, airport extreme, and cable modem
2) checked the DNS via the web and my site addresses are pointing to my static IP address
3) turned Web services off and on again in Server Admin
4) checked the Airport port mapping to make sure Web Service (Port 80) was still open
Any idea what's causing the problem???
Thank you.

Gracoat,
I checked all cables and they are plugged in and seated properly.
I typed "changeip -checkhostname" in the terminal and got "serveradmin must be run as root" ...(sorry, I'm not a command line kinda guy)
Here is a cut/paste of some recent log activity (I X'd out some info for privacy):
Apr 29 11:38:32 xxxxxx-corp jabberd/c2s[231]: [8] [::ffff:10.0.1.3, port=51868] connect
Apr 29 11:38:32 xxxxxx-corp jabberd/c2s[231]: SASL callback for non-existing host: xxxxxx-corp.com
Apr 29 11:38:32 xxxxxx-corp jabberd/c2s[231]: [8] [::ffff:10.0.1.3, port=51868] disconnect jid=unbound, packets: 0
Apr 29 11:38:35 xxxxxx-corp jabberd/c2s[231]: [8] [::ffff:10.0.1.3, port=51869] connect
Apr 29 11:38:35 xxxxxx-corp jabberd/c2s[231]: SASL callback for non-existing host: xxxxxx-corp.com
Apr 29 11:38:35 xxxxxx-corp jabberd/c2s[231]: [8] [::ffff:10.0.1.3, port=51869] disconnect jid=unbound, packets: 0
Apr 29 11:38:38 xxxxxx-corp jabberd/c2s[231]: [8] [::ffff:10.0.1.3, port=51870] connect
Apr 29 11:38:38 xxxxxx-corp jabberd/c2s[231]: SASL callback for non-existing host: xxxxxx-corp.com
Apr 29 11:38:38 xxxxxx-corp jabberd/c2s[231]: [8] [::ffff:10.0.1.3, port=51870] disconnect jid=unbound, packets: 0
Apr 29 11:38:39 xxxxxx-corp org.apache.httpd[47665]: Syntax error on line 13 of /etc/apache2/proxy_sites/0000_any_8443_localhost.conf:
Apr 29 11:38:39 xxxxxx-corp org.apache.httpd[47665]: SSLCertificateKeyFile: file '/etc/certificates/xxxxxx-corp.com.XXXXXXXXXXXXX9747C96C30F1986D48D59D227F1.key .pem' does not exist or is empty
Apr 29 11:38:39 xxxxxx-corp com.apple.launchd[1] (org.apache.httpd[47665]): Exited with exit code: 1
Apr 29 11:38:39 xxxxxx-corp com.apple.launchd[1] (org.apache.httpd): Throttling respawn: Will start in 10 seconds
Apr 29 11:38:41 xxxxxx-corp jabberd/c2s[231]: [8] [::ffff:10.0.1.3, port=51872] connect
Apr 29 11:38:41 xxxxxx-corp jabberd/c2s[231]: SASL callback for non-existing host: xxxxxx-corp.com
Apr 29 11:38:41 xxxxxx-corp jabberd/c2s[231]: [8] [::ffff:10.0.1.3, port=51872] disconnect jid=unbound, packets: 0
Apr 29 11:38:44 xxxxxx-corp jabberd/c2s[231]: [8] [::ffff:10.0.1.3, port=51873] connect
Apr 29 11:38:44 xxxxxx-corp jabberd/c2s[231]: SASL callback for non-existing host: xxxxxx-corp.com
Apr 29 11:38:44 xxxxxx-corp jabberd/c2s[231]: [8] [::ffff:10.0.1.3, port=51873] disconnect jid=unbound, packets: 0
Apr 29 11:38:47 xxxxxx-corp jabberd/c2s[231]: [8] [::ffff:10.0.1.3, port=51874] connect
Apr 29 11:38:47 xxxxxx-corp jabberd/c2s[231]: SASL callback for non-existing host: xxxxxx-corp.com
Apr 29 11:38:47 xxxxxx-corp jabberd/c2s[231]: [8] [::ffff:10.0.1.3, port=51874] disconnect jid=unbound, packets: 0
Apr 29 11:38:49 xxxxxx-corp org.apache.httpd[47667]: Syntax error on line 13 of /etc/apache2/proxy_sites/0000_any_8443_localhost.conf:
Apr 29 11:38:49 xxxxxx-corp org.apache.httpd[47667]: SSLCertificateKeyFile: file '/etc/certificates/xxxxxx-corp.com xxxxxxxxxxxxxxxxC96C30F1986D48D59D227F1.key.pem' does not exist or is empty
Apr 29 11:38:49 xxxxxx-corp com.apple.launchd[1] (org.apache.httpd[47667]): Exited with exit code: 1
Apr 29 11:38:49 xxxxxx-corp com.apple.launchd[1] (org.apache.httpd): Throttling respawn: Will start in 10 seconds
Apr 29 11:38:50 xxxxxx-corp jabberd/c2s[231]: [8] [::ffff:10.0.1.3, port=51877] connect
Apr 29 11:38:50 xxxxxx-corp jabberd/c2s[231]: SASL callback for non-existing host: xxxxxx-corp.com
Apr 29 11:38:50 xxxxxx-corp jabberd/c2s[231]: [8] [::ffff:10.0.1.3, port=51877] disconnect jid=unbound, packets: 0
I attempted to open my websites, and connect remotely via VPN, from multiple sources without any luck ...it appears the server cannot be reached. All worked fine a few days ago and had been for quite some time.
My SSL certificate expired several months ago and I created a new one back then. It worked after the new certificate was installed and is still current. I have tried disabling SSL in the sites security settings but still they cannot be reached.
The only changes I can think of that may have been made in recent months to the sever is a system software update. Other than that, I'm at a loss. Any help is greatly appreciated!!

*.pages and *.key cannot be shown on the web page

I upload an a.KEYNOTE file which is quite alright on my local computer to the server (3.1.2). After successfully uploading, the web page keeps trying to display the file, but no stopping, just trying. Strangely, the name could be correctly displayed, just content keeps waiting.
But if I upload an a.PAGES file to the sever, the name is switched to a.PAGES.zip. Of course, the PAGES file cannot be displayed on the screen, just like the KEYNOTE file mentioned above, waiting and waiting, non-stop!
I reviewed many treads on the forum trying to find answers, but failed. A similar question like a a.PAGES.zip situation was found in a thread, but no one replies it.
So anyone had the same problem could tell me what's going on? And how to fix this problem?
Thanks in advance.

I upload an a.KEYNOTE file which is quite alright on my local computer to the server (3.1.2). After successfully uploading, the web page keeps trying to display the file, but no stopping, just trying. Strangely, the name could be correctly displayed, just content keeps waiting.
But if I upload an a.PAGES file to the sever, the name is switched to a.PAGES.zip. Of course, the PAGES file cannot be displayed on the screen, just like the KEYNOTE file mentioned above, waiting and waiting, non-stop!
I reviewed many treads on the forum trying to find answers, but failed. A similar question like a a.PAGES.zip situation was found in a thread, but no one replies it.
So anyone had the same problem could tell me what's going on? And how to fix this problem?
Thanks in advance.

Final Cut Server: Cannot connect to Java Web Start with a web browser

I get this exact error http://support.apple.com/kb/TS1610, but their steps do not fix it.
sudo cp /etc/apache2/sites/0000any_80.conf.default /etc/apache2/sites/0000any_80.conf
has me validate and then goes back to the prompt the other:
Xserve:~ admin$ sudo /Library/Application\ Support/Final\ Cut\ Server/Final\ Cut\ Server.bundle/Contents/Resources/sbin/post-install.sh
Stopping Final Cut Server services ...
launchctl: Error unloading: com.apple.FinalCutServer.fcsvr_ldsd
launchctl: Error unloading: com.apple.FinalCutServer.fcsvr_stored
Starting postgresql ...
Initializing database ...
could not connect to server: No such file or directory
Is the server running locally and accepting
connections on Unix domain socket "/tmp/.s.PGSQL.8820"?
connection failed, retrying (1) ...
-- updating: pxtraitclass
-- updating: pxperm
-- updating: pxgroup
-- updating: pxschema
-- updating: pxentitylinktype
-- updating: pxenum
-- updating: pxenumentry
-- updating: pxmdfield
-- updating: pxtrait
-- updating: pxmdgroup
-- updating: pxmdgrouphasfield
-- updating: pxeventstatus
-- initializing config package: base
-- updating: enum
-- updating: enumentry
-- updating: mdfield
-- updating: mdgroup
-- updating: mdgrouphasfield
-- updating: mdmap
Settings plist already present, not overwriting.
Starting Final Cut Server services ...
Configuring webstart for OS X Server on default site ...
web:Modules:array_id:php5module:enabled = yes
web:Modules:array_id:userdirmodule:enabled = yes
web:Modules:array_id:apple_userdirmodule:enabled = yes
web:Sites:array_id:*:80_:IfModule:_array_id:mod_rewrite.c:RewriteCond:_arrayindex:0 = "%{REQUEST_METHOD} ^TRACE"
web:Sites:array_id:*:80_:IfModule:_array_id:modrewrite.c:RewriteEngine = yes
web:Sites:array_id:*:80_:IfModule:_array_id:mod_rewrite.c:RewriteRule:_arrayindex:0 = ".* - [F]"
web:Sites:array_id:*:80_:IfModule:_array_id:mod_rewrite.c:RewriteRule:_arrayindex:1 = "^/FinalCutServer$ /~fcsvr/Sites/webstart/index.php [NC,L]"
service: This command still works, but it is deprecated. Please use launchctl(8) instead.
service: This command still works, but it is deprecated. Please use launchctl(8) instead.
Xserve:~ admin$
Help? I should point out this is my first experience with OSXserver and I am not exactly an advanced user.
Message was edited by: otterholt

Hi, this dind't help.
I can resolve host name, so it looks like DNS works:
If I typed: <IP address> or localhost or localhostname.local or hostname I stiil get the default OS X web page with services, but no service is available not I can't connect to FCS web start page.
I didn't change DNS records - it is default as it was after installation of system and FCs.

I have wi fi but cannot connect to any web pages

I am having trouble connecting to the internet. I have the i pad 2 and all was fine with the internet up an till now, i have full wi fi signal but am unable to connect to any web pages, ive tried reseting network settings. My other computers in the home are connecting ok so thats why im thinking there is something wrong with the i pad.

What exactly happens when you try to connect? Do you get any message, pop up?

Cannot run Report on the web

Hello
i am trying to run a report on the web but it does not ,
i have a form from where i am calling a report using
run_product built-in, it does not respond nor give any error
message, what can be th problem
the report server has been set.
please can any one you who have tried these help me out
Vishnu Vadla
null

What are you using to run your forms and reports, forms web
cartridge, reports web cartridge/ reports web cgi, oracle
application server ....?
Vishnu Vadla (guest) wrote:
: Hello
: i am trying to run a report on the web but it does not ,
: i have a form from where i am calling a report using
: run_product built-in, it does not respond nor give any error
: message, what can be th problem
: the report server has been set.
: please can any one you who have tried these help me out
: Vishnu Vadla
null

Cannot open/rename/use files on remote drive via Airport Extreme

Bit of a weird one this.
I've not used my remote drive - connected to the Airport Extreme base station - for some time. I often connect the drive directly to the Mac by USB just because it's quicker, then reconnect to the base station afterwards.
Today I tried and while it seemed to copy files OK from my desktop on to the remote drive, the files on the remote drive were missing the correct icons, would not open and I could not rename them or copy them back, e.g.:
http://img.skitch.com/20091102-85c7x26ta9kr831ndjqrfhb2y3.gif
I looked at the drive info and it was showing 'No Access'. Tried changing that to Read/Write but it reset every time:
http://img.skitch.com/20091102-gekciqehai1mf5eu3h779b44iw.gif
I also checked the disk settings in Airport utility, and it's set to secure with Airport Extreme Password:
http://img.skitch.com/20091102-8djy7ehej684u2eg7sk1b7871n.gif
Can anyone tell me what permissions (presuming this is what it is) I need to change where, or what else I have to do to solve this. Without harming the existing data, of course!
Thanks

You should set a password on the drive and not the device. Example: your AirPort Device Password will allow anyone that has the AirPort Utility to have access to your Device. There is an option, on the AirPort device, once you click on the hard drive, where you can set a password on the drive. That way you don't give out your administrative password of your device.
Device does not mean Hard Drive, it is your AirPort Device.

I cannot always get wi fi on my iPhones using airport extreme.

I am not getting consistent wi fi signals in my home like I used to. My iPhones are using 4g and causing data usage issues. I have an apple airport extreme. Is there any way to increase my signal strength? Are there settings on my airport?
Thanks

By default, your AirPort is broadcasing a Wi-Fi network at full power. There is no way to increase the signal level. However, you may find that the reason that the signal level may not be sufficient is that there is some form of Wi-Fi interference present. This can come in many forms; the most common are other Wi-Fi operating nearby, portable phones, microwave ovens, & baby monitors.
I suggest you perform a simple site survey, using utilities like iStumbler, or AirRadar to determine potential areas of interference, and then, try to either eliminate or significantly reduce them where possible.
Other excellent utilities are: InSSIDer and WiFi Explorer.

I cannot find a print button on the toolbar and therefore cannot print sometimes from the web

When I use internet explorer there is a "print" button on the tool bar, but there is not on Mozilla and cannot find anywhere to add it to the toolbar.

hi, how are you?
To show the print button in the tool bar, do this.
go to View option, then toolbars, and then customise, and a popup window will appear, in that window look for a print button, (i think that is the last of the first row) click on it, and drag it to the toolbar
Byee

I cannot connect to att...the diagnostics shows that the airport extreme is connected to the web...

Similar Messages

Maybe you are looking for