I cannot connect to my PC after upgrading to Leopard

I was using 10.4.11 and was able to connect to a PC that was connected to my G5 by ethernet cable.
I installed Leopard. But now I am not able to connect to the PC. This is what happens:
When I click on "Connect to Server" a dialogue box appears that says "Server Address" & gives that as smb://192.168.1.50.
192.168.1.50 is the correct IP address for my PC .
THen clicking on "Connect" brings up a dialogue box that says "Select the volumes to mount".
ShareDocs is only one volume showing.
BUT when I try to highlight the volume ShareDocs it does not highlight. It stays dimmed.
Anyone know what I should do to enable this to work as it should?

I have the same problem too and I have not been able to "fix" it. It is very frustrating! My other electronics connected to my wifi: pc, ipad, iphone 3G,and TV they all working fine. I went to the Apple store and they say this problem is ralated to my network provider, then when I went to AT&T they say it is Apples problem. Who do you believe?
Luis

Similar Messages

Cannot connect to iTunes Store after upgrading to iTunes 10.4

Hi, i'm using MAC OS X 10.6.8
After I upgrading the iTunes to version 10.4 yesterday
itunes cannot connect to the itunes store anymore
and it would keep connecting
i can't even cancel the connection...
now i can't do anything with my itunes....

I also updated my Mac OS X to version 10.6.8 a few hours ago as well and I upgraded my iTunes to the latest version, but now I can't connect to the store AND iTunes can't detect my iPhone 4! Not only that, but my iPod nano can't make a connection either. So I don't have any means to backup my files or sync my iPhone and iPod to my Mac and vice versa. In my case though, the iTunes Store doesn't even tell me that it's connecting at all, the page just says, "iTunes Store" just like when I don't have an internet connection, but the fact is, I do have internet, so why is this happening? It's really giving me a hard time to solve this issue. Is iTunes 10.4 having a problem? Help will be greatly appreciated!

Cannot Connect it iTunes store after upgrade

I STUPIDLY allowed the iTunes upgrade to install today. Now I cannot connect to the iTunes store. I have completely shut off the Norton Firewall. Get this... I run the iTunes diagnostic tool (Help.. run diagnostics) and it tells me everything's connecting fine:
I ran the diagnostics. It says all the connections are good but I still cannot connect to the iTunes store after I upgraded. I have completely shut off my firewall.
iTunes 7.6.2.9
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.

After several hours of searching in the forums and trouble-shooting I ended up on Norton chat support. They suggested I uninstall and reinstall Norton 360, and even gave me a free upgrade from v1.0 to v2.0 Inbetween removal of the v1.0 and reinstallation, I tried iTunes and was able to connect to the store. After installing v2.0 I can still connect so I'm running again for awhile.... .until the next update. Other people running Norton have had similar problems and Norton updates fixed it.
I still can't run the exact same iTunes library on my Vista laptop because artwork makes iTunes crash. An early 7.x update caused this and I had to move everything to my desktop with XP.

After upgrading to 5.1 safari cannot connect to any server, after upgrading to 5.1 safari cannot connect to any server

I have upgraded to safari 5.1 through auto update
After restart the safari does not connect to any server saying it cannot find them
other browsers such as Minefield work fine and the internet connection works fine
The computer is connected via airport to a router, firewall is active.
Safary 5.06 worked without any glitch
any ideas?

I have the same problem but im on Lion, All my web browsers seem to work perfect but not Safari. : (

Cannot connect to iTunes Store after upgrade to ios 5 - iPad2

After upgranding my iPad2 to the ios5 I lost the connection to the apple store and the iTunes. I already reseted my password using the web, but I still cannot access the iTunes using the iPad2, but I CAN access the iTunes using my iphone4 and my ipod touch. Does anyone have any idea on how to solve this mistery?

Try here > Can't connect to the iTunes Store
On the iPhone, tap Settings > General > Reset > Reset Network Settings
Restart your iPhone. Try connecting to the iTunes Store.

Cannot connect to iTunes Store after Upgrade to 7.6.1.9

Ever since I upgraded to the newest version, I can no longer connect to the iTunes store or the update server. Yes its a d@mn dialup connection, but you think it wouldn't matter to iTunes.
I've tried thru the Bellsouth Accelerator and straight shot out.
Here's the diagnostic log:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Computer Corporation Latitude C840
iTunes 7.6.1.9
QuickTime 7.4.1
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
Apple Mobile Device 1.1.4.7
Bonjour 1.0.4.12
iTunes Serial Number 3451B6A3DCB6xxxx
Current user is an administrator.
The current local date and time is 2008-04-02 19:17:34.
iTunes is not running in safe mode.
Video Display Information
Dell C840
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {BE0BF26F-B828-4CC9-B7E4-CCFAF9921D6E}
Description: WAN (PPP/SLIP) Interface
IP Address: 67.33.xxx.xxx
Subnet Mask: 255.255.255.255
Default Gateway: 67.33.xxx.xxx
DHCP Enabled: No
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers: 205.152.37.23
205.152.37.23
205.152.132.23
Active Connection: Bellsouth
Connected: Yes
Online: Yes
Using Modem: Yes
Using LAN: No
Using Proxy: Yes
HTTP Proxy: localhost:8080
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2008-02-25 22:00:35.

Turn off all your firewalls, software accelerators, security software like Norton/McAfee/Zone Alarm/NOD/Kapersky/etc, even the Windows firewall.
An iTunes upgrade is actually an uninstall of itunes & quicktime, then a reinstall of the new versions.
Those items I mentioned all see iTunes as a new program and you have to set security to allow iTunes again. So if you temporarily turn them off and can connect to the sotre, you will know that's it.
This article has info on the Windows firewall settings:
http://docs.info.apple.com/article.html?artnum=300870

Cannot publish from iWeb 08 after upgrading to Leopard

When I click on Publish from iWeb I first get a window .Mac Information asking me to login and a smaller window saying "logging in to iWeb". I click on sign in button from .Mac Information window and then get the System Preferences window telling me I am signed in and giving me my account status. From here nothing happens. The "logging into iWeb" message stays and nothing happens.
What should I do?

Thanks and Merry Christmas to you too! I have experienced both modem/network problems and was unable to publish in Tahiti and Cook Islands because of that and now these problems which have nothing to do with network it seems - so yours may or may not be network related. I was able to cheat and copied my "Site" folder from my hard drive to my iDisk rather then publishing. I can't remember if you've tried this or not (read a lot of strings today) but you can publish to a folder and then copy that folder to your iDisk at /Web/Sites/iWeb/Site as "Site" after first renaming the one that is out there now. Let me know if you have any questions on how to do it. It sounds like you are traveling like we are and anxious to communicate with friends and family back home. When you are bored, our site is web.mac.com/baganworldtour.
At least we now have our first update out there in two weeks. But it took almost two hours to copy the folder and this won't work forever. Hopefully we, whether by the discussion room or .mac support next week, will be able to fix the problem for real.
Thanks. Good Luck. Merry Christmas

I cannot connect to the internet after switching providers. I've changed the email address associated with the new account but am sure there is something else I need to change. Can anyone help me?

I cannot connect to the internet after switching providers. I've changed the email address associated with the new account but am sure there is something else I need to change.   I have also changed the apple information as well including user name and password. Can anyone help me? (This is an ipad question).

Apple ID: Changing your Apple ID
http://support.apple.com/kb/ht5621
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796?viewlocale=en_US&locale=en_US
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
iOS: Changing the signed-in iTunes Store Apple ID Account
http://support.apple.com/kb/ht1311
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Cannot connect to itunes store after update

I cannot connect to itunes store after downloading latest update. I have tried everything list in "support" including flushing, etc

My problem appeared after upgrading to itunes 8.
"itunes could not connect to itunes store"
"Make sure network connection is active and try again"
Norton was the problem ....
-open Norton
-Select "Internet Security", then "Status & Settings"
-Select "Personal Firewall", then "Programs"
-Scroll down to itunes
My situation had itunes Internet access set to
"block all" I changed this setting to "permit all"
Hope this info helps you out ... Happy Holidays

Cannot End Call on Q10 after upgrading to OS 10.2

I cannot End Call (mostly Outgoing) after upgrading to OS 10.2. The receivers phone keeps ringing even after i try to disconnect the call. The "END CALL" option is grayed out and the red led on the top left keeps blinking. This happens very frequently (mostly Outgoing calls). Any thoughts or solutions Thx

marootz wrote:
I cannot End Call (mostly Outgoing) after upgrading to OS 10.2. The receivers phone keeps ringing even after i try to disconnect the call. The "END CALL" option is grayed out and the red led on the top left keeps blinking. This happens very frequently (mostly Outgoing calls). Any thoughts or solutions Thx
From the main screen, swipe down from the top black bezel to Settings > About... what is the OS Version listed there?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Cannot print a PDF file after upgrading to Windows 8.1

Cannot print a PDF file after upgrading to Windows 8.1
I can print anything else from either the Desktop or Start but not a PDF. No error message but just does not print.
Update: down loaded Adobe Reader which runs on the desktop so when I read a PDF file it now runs on the desktop and I can print it.

Cannot print a PDF file after upgrading to Windows 8.1
I can print anything else from either the Desktop or Start but not a PDF. No error message but just does not print.
Update: down loaded Adobe Reader which runs on the desktop so when I read a PDF file it now runs on the desktop and I can print it.

Problem with connecting to free wifi after upgrading to Windows 8.1 from Windows 8

Hi
I had problems with connecting to free Wifi after upgrading my PC(Notebook) to Windows 8.1 from Windows 8. As I travel a lot within europe, I am used to being able to connect to Free Wifi(those that dont need a key or password to enter) but soon after downloading
Windows 8.1 I almost never was able to do this. I'd always get «LIMITED» even though the signal was strong.This was so fustrating,so much so that I reset my PC to clear it of Windows 8.1 and am now back to Windows 8.This is a shame because I was really liking
using Windows 8.1 and if not for this problem(which is a big one) I'd still be using it. If I download Windows 8.1 again from the Windows store what is the probability that I'll have the same problems?
Thanks Portozzygirl

More often than not when a device isn't working it is because the driver has become corrupted. Re-installing a fresh copy should help
http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isnt-working-properly?SignedIn=1
http://captaindbg.com/how-to-update-drivers-on-windows-7/ (works on win 8 too)
Wanikiya and Dyami--Team Zigzag

HT4623 i cannot activate my iphone 3gs after upgraded to ios 6.1

i cannot activate my iphone 3gs after upgraded to ios 6.1, please help!

read http://support.apple.com/kb/TS3424

Problems connecting to the internet after Upgrade from windows 8.1 pro

Cant connect to the internet after upgrading to windows 8.1 pro, what can i do to rectify this problem?
Thanks

Hi,
You can also try to install the older version in compatible mode:
Windows 8.1 Wifi showing "limited" or "No Internet Access"
Solution: revert your network adapter driver back to an older version
http://blogs.technet.com/b/dennis_schnell/archive/2013/08/31/windows-8-1-wifi-showing-quot-limitied-quot-or-quot-no-internet-access-quot.aspx
In addition, disable power management on your network driver:
Open Network and Sharing Center.
Click the Change adapter settings link in the upper left of the navigation pane.
Right click the network connection you want to enable/disable power management support on and click Properties .
Click Configure .
On the Power Management tab, clear the Allow the computer to turn off this device to save power check box.
If the issue still persists, please upload the event log for our research:
Kate Li
TechNet Community Support

I cannot connect to the Internet after installation of Windows Vista Ultimate edition.

I cannot connect to the Internet after installation of Windows Vista Ultimate edition. For some odd reason, it seems my ethernet has not yet been installed to my operating system and I do not know how to do that even with the internet, I have the LAN cable hooked up to my computer but I do not know exactly what to do about it. Is there some sort of driver I need to install, or what? How do I do that without the internet?
This operating system is on a separate partition to my other operating system that is connected to internet already (Windows Vista Premium) that I do not wish to use anymore because of it's corruption. I tell you this because you may know a way of finding the driver files on my previous operating system that I may be able to transfer to the other.

In order to avoid board clutter, we ask that you post your topic on one board only.
Please look ---> HERE for replies to your topic. Thank you.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

I cannot connect to my PC after upgrading to Leopard

Similar Messages

Maybe you are looking for