I cannot connect to my sever

I cannot connect to my server

You most likely do not have a server. But your iPad maybe giving you a message that you cannot connect to the server.
If this is happening in Safari on only one site then chances are that the server for the site you are trying to visit is down.
If this is happening on every site you visit there could be a problem with your internet connection. If you are using Wi-Fi the first this to try is to reboot your Wi-Fi router. Turn off all devices connected to the router including your iPad. Then turn off the router. Wait 30 seconds and turn the router back on. After the router completes its startup routine and indicates a good connection to the internet turn on your iPad. See if you can connect to where you were trying previously.

Similar Messages

  • Cannot connect to smtp sever in Mail or Eudora

    Hi All,
    I've been reading the forums all afternoon and although there are a lot of similar problems none exactly like mine (or, no solutions that fixed mine!) After a hard drive failure I'm trying to set up Mail with my godaddy account. I can receive, but not send. In the activity window there are two spinning barber poles:
    Delivering message (connecting to server "smtp.secureserver.net")
    Checking account (connecting to server "smtp.secureserver.net")
    But after a short time a third message blinks something about "writing to disk." It doesn't last long enough to read the details.
    I tried the "perfect godaddy settings" I found in another thread but they didn't work. And then (and I suppose this is significant) I gave up and switched to Eudora and the same thing happened- I can receive but not send.
    Any suggestions?

    OK, I discarded the reference to the network as well as the half dozen or so smtp servers I've tried over the course of the day. I still can't change the network (airport) password. I type in the new one and get the message NetCfg wants permission to change access permissions of item PPP Password in your keychain" If I click allow, it goes back to what it was. EEEK!
    And I still can't send email - same thing, can't connect to SMTP server.
    Suppose I just chuck all this and upgrade to leopard (which I was thinking of doing when my hard drive crashed.) Will all these troublesome settings remain or can I start anew?

  • Cannot connect essbase sever using Essbase administration service console

    Hi:
    I installed Essbase 11.1.2.2 in my PC,
    but I cannot connect essbase server with the administration servise console. but I try to connect with ESSCMD.exe, everything is OK.
    could you pls help to advise how can I connect it ?

    Did you add the essbase server in EAS?
    If yes what is the message that you are getting while connecting to Essbase?
    Regards
    Celvin
    http://www.orahyplabs.com
    Please mark the answers as helpful/correct if applicable

  • Cannot Connect To Server

    I am running multiple services with the latest version of OS X Server (10.6.8) on my MacMini (web, vpn, mail, ichat, ical, address book, etc.) .
    Everything has been working fine for the last year and no changes have been made to the server, settings, ISP, or DNS, with the exception of installing the latest system software updates. Now, when I try to open my websites or connect remotely via VPN I get a "cannot connect to sever" message.  All other services are still working as they should. The server is hooked up to an Airport Extreme via a cable modem with a static IP.
    I have tried the following thus far:
    1) checked all cables and they are plugged in and seated properly.
    2) restarted the server, airport extreme, and cable modem
    3) turned Web services off and on again in Server Admin
    4) checked the DNS via the web and my site addresses are pointing to my static IP address
    5) checked the Airport's port mapping to make sure Web Service was still on
    6) checked my websites SSL certificate to make sure it's current and enabled
    7) tried disabling SSL
    8) created and enabled a new self-signed SSL certificate
    Recent log activity shows:
    Apr 29 11:38:49 xxxxxx-corp org.apache.httpd[47667]: Syntax error on line 13 of /etc/apache2/proxy_sites/0000_any_8443_localhost.conf:
    Apr 29 11:38:49 xxxxxx-corp org.apache.httpd[47667]: SSLCertificateKeyFile: file '/etc/certificates/xxxxxx-corp.com xxxxxxxxxxxxxxxxC96C30F1986D48D59D227F1.key.pem' does not exist or is empty
    Apr 29 11:38:49 xxxxxx-corp com.apple.launchd[1] (org.apache.httpd[47667]): Exited with exit code: 1
    I'm assuming the "key.pem' does not exist or is empty" part is the issue, but I am a novice and have no idea what that means.
    Any idea what's causing the problem??? ...I really need to get my websites back up and running! Any help is greatly appreciated.
    Thank you.

    No solution offered ...had to do a system software re-install to resolve the problem.

  • Cannot  connect to file shares on Yosemite server v4.0

    I have a fairly new installation of a Mac Mini Server.  As a Linux specialist I find some of the things frustrating but the rest of the office has a much easier life as things just work. Except for file sharing. If I use finder, use the shared section of the to display the network, find my server and double click to open up file share options, it refuses and says it cannot connect. I then use Finder>Go>Connect to Server and enter the SMB Server name as smb://[SERVER_NAME]/ and it immediately connects and I can connect to all drives successfully.
    When I check the system.log after after the unsuccessful connect attemt using Finder, The following is in the log:
    Feb 11 09:08:11 brtsrv00.identitylabs.uk digest-service[27507]: label: default
    Feb 11 09:08:11 brtsrv00.identitylabs.uk digest-service[27507]: dbname: od:/Local/Default
    Feb 11 09:08:11 brtsrv00.identitylabs.uk digest-service[27507]: mkey_file: /var/db/krb5kdc/m-key
    Feb 11 09:08:11 brtsrv00.identitylabs.uk digest-service[27507]: acl_file: /var/db/krb5kdc/kadmind.acl
    Feb 11 09:08:11 brtsrv00.identitylabs.uk digest-service[27507]: digest-request: uid=0
    Feb 11 09:08:11 brtsrv00.identitylabs.uk digest-service[27507]: digest-request: netr probe 0
    Feb 11 09:08:11 brtsrv00.identitylabs.uk digest-service[27507]: digest-request: init request
    Feb 11 09:08:11 brtsrv00.identitylabs.uk digest-service[27507]: digest-request: init return domain: BRTSRV00-IDENTI server: BRTSRV00 indomain was: <NULL>
    Feb 11 09:08:11 brtsrv00.identitylabs.uk digest-service[27507]: digest-request: uid=0
    Feb 11 09:08:11 brtsrv00.identitylabs.uk digest-service[27507]: digest-request: init request
    Feb 11 09:08:11 brtsrv00.identitylabs.uk digest-service[27507]: digest-request: init return domain: BRTSRV00-IDENTI server: BRTSRV00 indomain was: <NULL>
    Feb 11 09:08:13 brtsrv00.identitylabs.uk kdc[25915]: Got a canonicalize request for a LKDC realm from local-ipc
    Feb 11 09:08:13 brtsrv00.identitylabs.uk kdc[25915]: Asked for LKDC, but there is none
    Feb 11 09:08:13 brtsrv00.identitylabs.uk sandboxd[582] ([25915]): kdc(25915) deny file-read-data /private/etc/krb5.conf
    Feb 11 09:08:13 brtsrv00.identitylabs.uk digest-service[27507]: digest-request: uid=0
    Feb 11 09:08:13 brtsrv00.identitylabs.uk digest-service[27507]: digest-request: init request
    Feb 11 09:08:13 brtsrv00.identitylabs.uk digest-service[27507]: digest-request: init return domain: BRTSRV00-IDENTI server: BRTSRV00 indomain was: <NULL>
    Feb 11 09:08:13 brtsrv00.identitylabs.uk digest-service[27507]: digest-request: uid=0
    Feb 11 09:08:13 brtsrv00.identitylabs.uk digest-service[27507]: digest-request: init request
    Feb 11 09:08:13 brtsrv00.identitylabs.uk digest-service[27507]: digest-request: init return domain: BRTSRV00-IDENTI server: BRTSRV00 indomain was: <NULL>
    Feb 11 09:08:13 brtsrv00.identitylabs.uk digest-service[27507]: digest-request: uid=0
    Feb 11 09:08:14 brtsrv00.identitylabs.uk digest-service[27507]: digest-request od: ok user=BRTSRV00-IDENTI\\ghorne proto=ntlmv2 flags: ENC_128, NEG_VERSION, NEG_TARGET_INFO, NEG_NTLM, NEG_TARGET, NEG_UNICODE
    Feb 11 09:08:14 brtsrv00.identitylabs.uk rpcsvchost[27362]: passwd entry for uid=1031 homedirectory invalid
    If I connect using Finder>Go> Connect to Sever I get the same error but the difference is the file shares are visible in the "Select the volumes you want to mount box" and I can mount the shares with no additional errors successfully. Please excuse me I am not very graphically savvy with OS-X (or OS-X for that mater). (Happy with Solaris, OpenBSD or Linux) I am a command line junkie (deep linux dude). Struggling to find my way around some of the things Apple DO. I am not sure I like people taking some of my toys and levers away.
    Any clue how to solve this issue?

    I am using fully qualified domain names for all servers on my network.  I have multiple domains untold virtual machines etc and services everywhere as it is a dev environment.  I use smb://brtsrv00.identitylabs.uk/ and it works without fault. Still no authentication from the Finder discovery.  Sorry I am a bit knew to to OS-X even though I have used different MacBook's for over 7 years.  DO a lot of VMware Fusion server development so don't touch OS-X much.  By the way, the name is provided by DNS and both the forward reverse lookup is correct. (dig brtsrv00.identitylabs.uk and dig -x 10.0.1.3)

  • HT1694 Why my iPad always cannot connect to the server of Hotmail including calendar?

    Only this hotmail account failed connection to the sever almost every time, and after I added it again, even cannot find it in calendar! What's up?

    Reboot your router by unplugging it for a couple of minutes, then try to reconnect when it comes back up.

  • 0n hp m276nw error printer cannot connect the server

    i am trying to set up scan to email every time i go through the proses at the end i get this message on hp m276nw error (printer cannot connect the server) i put the out going email in then i put in the printer port and server number in when i do the test it says  error printer cannot connect the server any help will be well come

    Hello youssi,
    Welcome to the HP Forums!
    I understand when you scan to email you're receiving a message stating cannot connect to server. I will do my best to assist you! Please follow this entire HP document on How to Scan: From the Control Panel (Including Scan to Email, to a PDF, and to a Network Folder) just to make sure everything is correct.
    If this doesn't work, then please follow these steps to try setting an alternative DNS to see if that resolves the issue:
    •    Open the Embedded Web Sever on your computer.
    •    Click the Network tab.
    •    Under Wireless click on IPv4.
    •    Under DNS Address Configuration select Manual.
    •    Set the Preferred address as 8.8.8.8
    •    Set the Alternate address as 8.8.4.4
    •    Click Apply twice to confirm the change.
    •    Turn the printer Off and back On and see if the issue is resolved.
    Please post your results, as I will be looking forward to hearing from you. Have a great night!
    I worked on behalf of HP.

  • Macbook Pro Cannot Connect to SMTP

    I am running a 2010 MacBook Pro with OS X 10.6.8.  I use Mac Mail app to send and receive e-mail.  Since Thursday 27th Dec 2012 I have been unable to send e-mail.  I get the grey spinning wheel until the following error message appears:
    The SMTP connection to server “mail.(mydomain).co.uk” failed.
    My outgoing mail server is currently showing as offline.  In fact I have 2 e-mail accounts and both are showing as offline.  No problem receiving mail.  Connection doctor connects fine to incoming mail, but not outgoing.
    I have tried the following (plus other things) without any success:
    Checked all the details, passwords etc
    Changed ports from 25 to 465 and 587
    Checked my IP address - it is not blacklisted
    Removed and re-added e-mail account
    Telnet port 25 - it is not blocked, but appeared to successfully connect (from what I understood from checking www)
    Temporarily disabled firewall
    Re-installed Mac app
    Rebuilt mailbox
    Repaired disk permissions
    Used the repair disk utility
    Deselected SSL and changed various options within "Edit SMTP server list"
    Reset the keychain
    Tried updating software but it says no update available.
    Re-instated an old Accounts.plist (and one other file which I forget, something like com.apple.mail) from time capsule.
    I then set up a hotmail account on Mail app but had exactly the same problem, ie cannot connect with SMTP server.
    However, I set up my e-mail account on my wife's iPad with the same details and there was no problem at all, e-mail sent just fine as it does from my iPhone.  So the issue has to be with my Macbook, right?  Can anyone help before I go and spent £1250 on a new Macbook?  I'm sure I'm missing something obvious.  Thanks in advance for any advice.

    Just FYI, I've had the same problem for months now. I have been accessing my hotmail via the web, but decided to try the OS X Mail app.  I could get emails into the account with no problem but couldn't send.  I read all the blog and support entries and have tried everything they recommended, like changing my computer name to one word, without success.  Then last night, it just so happened that my broadband provider had to change out my wireless modem.  As soon as he plugged in the new one, some emails that had been in my outbasket for a month went through instantly and all of a sudden my Mail, both incoming and outgoing now work.  So I think people need to look at their router settings for the a solution to the problem. 

  • I cannot update my ipad2 to ios5.  Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server.  Tried resetting network settings, still not connecting.  Tried updating iTunes, still not connecting.

    I cannot update my ipad2 to ios5.  Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server.  Tried resetting network settings, still not connecting.  Tried updating iTunes, still not connecting.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

  • Cannot connect to other computers on network

    We have a small office network with 7 macs on it. 5 wired 2 laptops with Airport Extreme.
    We have an 8 port switch where the 5 desktops and the airport connect. When I am on a laptop I cannot connect to any of the desktops. It does not even see them (and same with desktop to laptop) What do I need to do to share these two on the airport

    Configure the AirPort Extreme base station (AEBS) so that it the option to distribute IP addresses is DISABLED. That will place the wireless and wired computers on the same subnet.

  • PI 7.11: Cannot connect to server using message server:...

    Hello Guys,
    we make the Application Management for a Customer PI System.
    Scenario:
    - the SAP Gui Connection to the ABAP Stack is routed via SAPRouter and Works fine.
      SAP Gui -> our SAP Router -> VPN Box from Customer -> Firewall Customer -> ABAP Stack PI System
    - WebAccess its working fine, the Customer use Webdispatcher on every PI Server...
      Browser -> VPN Box from Customer -> Firewall Customer -> Java Stack (Port: 5xx00 btw. 81xx (Webdispatcher))
    Problem:
    Our Problem ist, we can not proceed the Integration Builder or the ESB, the Java Web Start works fine and open the Logon Screen Correctly -> but i fill the Logon Screen with my User name and Password and press Logon come the follwing Error:
    "Cannot connect to server using message server: ms://<hostname>.<domain>:8134/P4"
    In the Details from the Error Message:
    "<hostname>.<domain>:53404 Reason: com.sap.engine.services.rmi_p4.P4IOException:
    Cannot open connection to host: <IP-Adress of Central Instance> and Port: 53404"
    The Customer says, the Firewall is open with the IP Adresses and P4 Port but i dont think so...
    Can everybody help me, or have tips for me! I have checked a lot of OSS Messages (PI High Availabilty etc... its all correct on the System)
    Sorry for my bad English
    Best Regards,
    Markus

    Hi Markus,
    did you check if the browser is using a proxy? (In this case your scenario unfortunately won't work).
    P4-port should generally be routed via a proxy (described in the help.sap.com), but within the PI-Tools(JNLP) the proxy-usage is not implemented.  There is even a SAP-note that describes how to check the JavaWebStart-Proxyconfiguration, but this won't help either.
    If there is a proxy defined in the browser everything is working fine till you pass the logon-screen but even with the correct "javaws"-settings you won't be able to go on.
    (This problem is pretty bad if you do have developers and the SAP-servers seperated because of security issues. I'm hoping that this malfunction will be solved with upcoming patches.)
    Solution: Establish a connection without any proxy in between.
      E.g.: a terminal server in the same network
    It would be helpful to find more people with the same problem to force a fix from SAP for that.
    If anyone else is having problems with this, please add a comment to this thread.
    Best regards
    Christian

  • Exchange active sync cannot connect to server after migration mailbox user from exchange 2007 to exchange 2013 coexistence

    Hello, everyone, my name is rafl
    I have a problem with exchange 2013 active sync.
    I have installed exchange 2013 coexistence with legacy exchange 2007, I have to migrate user mailboxes: [email protected] from exchange 2007 to exchange 2013.
    but any problem with active sync connection on the mobile device after moving mailbox user. I reconfigure the exchange ActiveSync external connection domain (latest.domain.com) on mobile device replacing legacy exchange ActiveSync external connection domain
    (legacy.domain.com)
    the process of moving mailboxes successfully without error.
    Access OWA for exchange 2007 and exchange 2013 is running normally
    access mail from Outlook running normally
    Certificate request has been installed and has no problem with it
    The OWA virtual directory is configured for internal and external connections and different from the legacy exchange
    The autodiscover virtual directory is configured for internal and external connections and different from the legacy exchange
    ActiveSync virtual directory is configured for internal and external connections and different from the legacy exchange
    user mailboxes are still on exchange 2007 is not problematic.
    only problem with Exchange Active Sync on mobile devices, where I set up an email with android, iphone, windows phone. the error message: cannot connect to the server.
    but, if I create a new user and create user mailboxes directly in exchange server 2013, ActiveSync can run without error on mobile device, access through OWA, MsOutlook, Outlook Anywhere also run normally.
    only the results of user migration from exchange 2007 to exchange 2013 which is troubled with exchange ActiveSync connection.
    any ideas for this problem, and what should I check on the exchange server ..?

    i have run the activesync test connectivity and get some error :
    Testing TCP port 443 on host domain.co.id to ensure it's listening and open.
    The specified port is either blocked, not listening, or not producing the expected response.
    A network error occurred while communicating with the remote host.
    Elapsed Time: 3091 ms.
    Testing TCP port 443 on host autodiscover.domain.co.id to ensure it's listening and open.
    The specified port is either blocked, not listening, or not producing the expected response.
    A network error occurred while communicating with the remote host.
    Elapsed Time: 21072 ms.
    Testing TCP port 80 on host autodiscover.domain.co.id to ensure it's listening and open.
    The specified port is either blocked, not listening, or not producing the expected response.
    A network error occurred while communicating with the remote host.
    Elapsed Time: 21049 ms.
    I have allowed access to port 443 (https) and 80 (http) on the firewall and re-run testconnectivity, but still with the same results. if I enable active sync for users who created directly in Exch 2013 there is no problem with the ActiveSync, just a problem
    for users who moved from Exch 2007 to Exch 2013. @Android, iPhone, and Blackberry the error message "cannot connect to the server"

  • TS3276 I cannot connect to my outgoing email server on my macBook pro, yet I can, for the same email account on my iPad. Also I can send emails from the other email account I have on my MacBook...really confused can anyone help?

    I cannot connect to my outgoing email server on my macBook pro, yet I can, for the same email account on my iPad. Also I can send emails from the other email account I have on my MacBook...really confused can anyone help?

    Sometimes deleting the account and then re-creating it can solve this issue
    Write down all the information in accounts before doing this
    Highlight the account on the left and click the minus button
    Then click the plus button to add the new account and follow the prompts

  • Cannot connect to iTunes store connection with the server has been reset

    I have updated itunes and now I cannot connect to the itune store says connection is reset but all other programs and internet is working properly. Please help

    Hi!
    Im using Windows 7.... I tried looking for the Wireless Config - but it isn't in the Services options!
    So, what can I do now?
    Thanx

  • Updates in iOS App Store. Cannot connect to iTunes Store

    I have been having an issue with my iPhone. Whenever I tap the updates tab on the bottom of the App Store window it pops up with a message saying that my iPhone Cannot connect to the iTunes Store. It is not an issue with my Wifi connection as I have tried over 3G. It is not my Apple ID as I have reset my password checkede all of my details and it works fine on the same Apple ID on my iPad. It is just my phone. I spent and hour on the phone with Apple Technical Support and they could not troubleshoot it, so put me through to a Senior Advisor. The phone line then cut off from Apples end. Even after I say OK to the message that opens it does not let me see my updates, it just shows a badge. Also the purchased bar in the updates section is not there. I can access the rest of the store as well, like the Top 25, Featured, Categories and Search. Just not my updates. It sounds like something so small it's not even worth it but it gets really annoying!
    The guy at Tech support went through numerous things with me. Signing in and out of my Apple ID and signing in on a different one. Checking my Internet connection. Resetting my network settings. Resetting all of my settings and have you turned it off and on again? I had tried all of those previous to being on the phone with him.
    I was wondering has anyone else had this problem? How can it be solved? Should I take my iPhone into an Apple Store? Should I reset it by erasing all data on it?
    All feedback would be great!
    Thanks

    Hi Hamid,
    I had realised that my iPhone Date & Time settings were not on auto so I can manually change them. Also I had heard rumours that other peoples' iPhones were doing the same thing as mine. I had looked into it for a day or so and found the answer on a website from Google.
    I checked it and it worked!
    Also thanks
    Jack

Maybe you are looking for