I cannot connect to the net through my TC with pppoe
I used to connect to the internet using my TC as a router, connecting via PPPoE using a DSL modem.
While my ISP had a problem with their network, the TC stop connecting to the PPPoE host and the amber light kept blinking. Because this was taking too long, I decided to investigate this issue.
I tried connecting my laptop directly to the modem, the restored my original configuration.
My MacBook Pro connected via ethernet to the DSL modem, is able to connect to the internet using a PPPoE connection. When I try the same via the TC, it just doesn't connect!
What should I do to troubleshoot this?
Is it possible that it is related to my ISP? Even though the laptop manages to connect via PPPoE.
Even the DSL modem when switched to router functionality is able to connect via PPPoE.
Only the TC seems to fail. What could be the problem?
Even the DSL modem when switched to router functionality is able to connect via PPPoE.
If your modem is acting as a router, you could configure the Time Capsule in Bridge Mode to connect that way. Is that a possibility that you could consider? A potential downside here is that if you have a dual band Time Capsule, the Guest Network feature cannot be enabled when the device is configured in Bridge Mode.
Similar Messages
-
iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
as i said i have two iphone 4S,,,,,
1st one --- has os 5.1
2nd one has os 6.0
i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
plz reply asap...!!!
thnxxx in advance!!!If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then:
Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
i cannot connect to the internet through my home router allthough i have put in the correct password from my internt router into my ipod touch-what should i do????????????
- Try resetting your iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Power off and then back on your router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections -
Cannot connect to the net using my wi fi on my blackberry curve
hi there, i cannot connect to the net using my wi fi on my blackberry curve 8520. wen i go in to settings and click on to manage connections it as a tick at the side of wi fi and says TALKTALK- 3B0BD4 and a tick at the end. if i turn my mobile network of my signal goes, and when i try to connect to the net a message comes up saying unable to connect to the internet, please try again later. if the problem persists please contact your service provider.when i try to set up a new wi fi connection and scan for networks it comes up with TALKTALK-3B0BD4 and undernieth it says connected and the signal is full at the side of it? many thanks maria
i cannot browse the internet thru wifi using bb curve 9360..when i checked my wifi settings it says that im already connected but when im trying to browse it says cannot connect contact your service provider
-
i cannot connect to the net using 3G, i have ipad2 16GB, i have tried resetting my ipad2, and resetting the network setting, my location is here in riyadh, everitime i try to connect to the net theres a pop message saying "could not activate cellular data network, please help me guys thanks.....
Thanks for the quick response. No, I did not get any error messages or any terms-of-usage screen. The employee I told my problem to was not computer savvy either. She just suggested I move to different spots w/in the library to see if that would make a difference. It didn't. When I connected to the library WiFi it did change the Verizon 3G that is usually in the upper left corner to iPad with two to three emanating arcs. I may have to go to the library in the next town. I was able to connect to theirs in the past when I had to download something greater than 20 MB. Unless I really want it, I will probably not even try to download something more than 20 MB due to the hassle. Yeah, I may have been better off getting a normal desktop or laptop and getting WiFi at home. To do that now would mean having my iPad 2 and a desktop computer, which I feel is extravagant. (I know there are a lot of big spenders out there who got the iPad as additional gadget for fun. This is a rich country.) A Verizon rep told me I couldn't set up a WiFi router at home just using an iPad. So it seems like a person who just uses 3G is limited to surfing the net (not even much YouTube because it eats a lot of data) and using email. I read about an app that helps print wirelessly using 3G, but a reviewer said you had to be an engineer to get it done right. BTW, I like the Steelers. I'm old enough to remember Franco Harris and that blond guy whose name escapes me back in the '70s. Since I live in North Jersey I feel I have to support the Giants. But I know football about as well as computers.
-
BIB-16633 Cannot connect because the database version is incompatible with
BIB-16633 Cannot connect because the database version is incompatible with Feb 15, 2005 9:28 PM
Reply
why is this?
oracle.dss.connection.common.ConnectionException: BIB-16633 Cannot connect because the database version is incompatible with this BI Beans version.
at oracle.dss.connection.server.drivers.mdm.MDMConnectionDriverImpl.connect(MDMConnectionDriverImpl.java:147)
at oracle.dss.connection.server.ConnectionImpl.connect(ConnectionImpl.java:285)
at oracle.dss.connection.client.Connection.connect(Connection.java:425)
at oracle.dss.connection.client.Connection.connect(Connection.java:342)
at oracle.dss.addins.designer.OLAPSource.test(OLAPSource.java:284)
at oracle.dss.addins.wizard.configFileEditor.OlapPanel.testConnection(OlapPanel.java:244)
at oracle.dss.addins.wizard.configFileEditor.OlapPanel.btnTest_actionPerformed(OlapPanel.java:378)
at oracle.dss.addins.wizard.configFileEditor.OlapPanel$3.actionPerformed(OlapPanel.java:120)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:245)
at java.awt.Component.processMouseEvent(Component.java:5100)
at java.awt.Component.processEvent(Component.java:4897)
at java.awt.Container.processEvent(Container.java:1569)
at java.awt.Component.dispatchEventImpl(Component.java:3615)
at java.awt.Container.dispatchEventImpl(Container.java:1627)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
at java.awt.Container.dispatchEventImpl(Container.java:1613)
at java.awt.Window.dispatchEventImpl(Window.java:1606)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:141)
at java.awt.Dialog$1.run(Dialog.java:540)
at java.awt.Dialog.show(Dialog.java:561)
at java.awt.Component.show(Component.java:1133)
at java.awt.Component.setVisible(Component.java:1088)
at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
at oracle.dss.addins.wizard.configFileEditor.ConfigFileEditorWizard.run(ConfigFileEditorWizard.java:229)
at oracle.dss.addins.designer.BIDesignerImpl.editConfigFile(BIDesignerImpl.java:1428)
at oracle.dss.addins.designer.BIDesignerAddin.openBIDesignerSettings(BIDesignerAddin.java:990)
at oracle.dss.addins.designer.BIDesignerAddin.actionPerformed(BIDesignerAddin.java:807)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.AbstractButton.doClick(AbstractButton.java:289)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1113)
at javax.swing.plaf.basic.BasicMenuItemUI$MouseInputHandler.mouseReleased(BasicMenuItemUI.java:943)
at java.awt.Component.processMouseEvent(Component.java:5100)
at java.awt.Component.processEvent(Component.java:4897)
at java.awt.Container.processEvent(Container.java:1569)
at java.awt.Component.dispatchEventImpl(Component.java:3615)
at java.awt.Container.dispatchEventImpl(Container.java:1627)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
at java.awt.Container.dispatchEventImpl(Container.java:1613)
at java.awt.Window.dispatchEventImpl(Window.java:1606)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
Lisa Sherriff
Posts: 137
OTN Member Since: Jan, 2001
Re: BIB-16633 Cannot connect because the database version is incompatible w ( In Reply To : BIB-16633 Cannot connect because the database version is incompatible with ) Feb 16, 2005 1:32 AM
Reply
Hi,
From the 10.1.2 BI Beans Install Guide it says:
OracleBI Beans supports data stored in Oracle9i Enterprise Edition or Oracle Database 10g Enterprise Edition. However, only particular releases and patchsets are supported:
* Oracle9i Release 2 Enterprise Edition, as follows:
o 9.2.0.6 for all platforms.
o 9.2.0.5 with the latest OLAP patch for Windows-only.
* Oracle Database 10g Release 1 Enterprise Edition with the latest OLAP patch.
From the error message it would appear that the Database is not one of the above.
Thanks,
Lisa
JDev QA
401488
Posts: 48
OTN Member Since: Aug, 2002
Re: BIB-16633 Cannot connect because the database version is incompatible with ( In Reply To : BIB-16633 Cannot connect because the database version is incompatible with ) Feb 18, 2005 8:01 PM
Reply
Hi,
Please note that we have follwing versions of DB up and running:-
1)Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
2)Oracle9i Enterprise Edition Release 9.2.0.5.0 - Production
With the Partitioning and Real Application Clusters options
JServer Release 9.2.0.5.0 - Production
Pls let us know the solution to resolve this problem ASAP.
Thanks.You are not using a supported version of the database. BI Beans/OLAP only support the following database versions:
10g - 10.1.0.3 with additional OLAP patch
9i - 9205 with additional OLAP patch
9i - 9206
I would suggest that you have not applied all the required database patches to your instance.
Hope this helps
Business Intelligence Beans Product Management Team
Oraclc Corporation -
I cannot connect to the internet using my Mozilla firefox, but can connect with Internet explorer. How do I fix the problem. I tried some options on your website but nothing is correcting the problem.
== yesterday ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; InfoPath.1; IEMB3; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; IEMB3)Try clearing your cache and cookies.
# Open the Tools menu, then select Clear Recent History... .
# In the '''Time Range to clear:''' drop-down, select '''Everything'''.
# Click the arrow next to '''Details''' to display the list of items that can be cleared.
# Select both '''Cookies''' and '''Cache'''.
# Click Clear Now .
Or you can try creating a test profile to see if it happens on that profile as well. See [[Managing Profiles]] -
Cannot connect to the net after installation
Hi All:
I tried to install and work with Archlinux today but was not successful at all.
I downloaded the ISO image of archlinux and burnt it to a CD (Archlinux-i686-2007.05-Duke). I tried to install the distro to my Compaq presario 700AP laptop (AMD Duron/128 MB RAM) Installation went smoothly and then the problems began. I coud not get networking to work. Here are the contents of the /etc/rc.conf file (networking section only given here):
<--- contents of /etc/rc.conf ------------->
lo="lo 127.0.0.1"
eth0="eth0 192.168.1.10 netmask 255.255.255.0 broadcast 192.168.1.255"
INTERFACES=(lo eth0)
gateway="default gw 192.168.1.1"
ROUTES=(gateway) ......................."I removed the ! sign to activate the gateway"
<-------/contents ------>
<--------- contents of /etc/resolv.conf ------------>
and in the /etc/resolv.conf, I have
nameserver 208.67.222.222
nameserver 208.67.220.220
search opendns.com
I typed opendns.com since I have these dns addresses from opendns.
<-------------
When I ping my nameserver (208.67.222.222), it puts out several lines of messages like:
64 bytes from 208.67.222.222: icmp_seq=55 ttl=252 time=284 ms
Likewise, when I ping default gateway, I get several lines of messages like:
64 bytes from 192.168.1.1: icmp_seq=1 ttl=128 time=1.62 ms
Yet I cannot ping google (http://www.google.com), and the error message is: "unknown host", nor can I use pacman to update packages from online repositories.
What am I doing wrong? I have followed the networking guidelines and installation guidelines from the websites.
Do I reinstall archlinux? I am lost.
Best wishes,
/ArinThanks for the advice, but I still am not successful and I cannot figure out why.
Dear All:
Thanks for all your responses, but I still cannot connect to the Internet and this is a strange problem.
I use a broadband connection, provided by India's BSNL broadband service, using an external modem (Huawei Corporation; SmartAx MT882). The internet service has provided me the following information:
IP Address: 192.168.1.10
Subnet mask: 255.255.255.0
Default gateway: 192.168.1.1
DNS servers: 218.248.255.145
DNS server(2): 61.1.96.71
In addition, I use opendns and the dns server names are:
208.67.222.222
208.67.220.220
Here are the contents of my /etc/rc.conf (networking section):
HOSTNAME="maurine"
Io="Io 127.0.0.1"
eth0="eth0 192.168.1.10 netmask 255.255.255.0 broadcast 192.168.1.255"
INTERFACES=(Io eth0)
gateway="default gw 192.168.1.1"
ROUTES=(gateway)
Contents of my /etc/resolv.conf
search maurine.com
nameserver 218.248.255.145
nameserver 61.1.96.71
nameserver 208.67.222.222
nameserver 208.67.220.220
If I try using pppoe -I eth0, it waits for some time and then returns a message "timeout waiting for PADO packets"
If I "try /etc/rc.d/adsl start", it returns [FAIL] after some time.
This has never been a problem with my ubuntu or windows installations before, I could easily connect to the web.
What should I do to make sure I can connect to the Internet?
When I ping 192.168.1.1, it takes me to my modem page and from there, when I run the diagnostics, it returns everything ok.
Where may be the problem and what do I need to do to resolve this problem?
Thanks in advance,
Arin Basu -
After my last software update I cannot connect to the net. How can I fix this?
After I last updated my software on my MacBook Pro it will not connect to the net. Tethered with an iPhone or wi Fi it won't work. As it's not connected I can't redo a software update. Any suggestions?
Sounds like the battery needs to be replaced.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
Firefox 5 does not work, it cannot connect to the net
I have tried two times to install Firefox 5, but it does not work, it cannot find the net at all. It tells (in Finnish) "Muodostetaan yhteyttä" ("Creating the connection" or something like that in English) and it stops to that point of installation when there should come your Mozilla page up. I am using Win 7 Ultimate and F-Secure Client Security. Luckily it is possilble to install back the version 4.0.1. At my laptop with Win XP there is no problem with version 5.
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
* https://support.mozilla.com/kb/Server+not+found
* https://support.mozilla.com/kb/Firewalls -
VNCing a Mac Connected to the Net through an iBook's Internet Sharing?
I have a B&W G3 connected to the internet via an iBook's ethernet port. It can VNC into the B&W G3, but on my local network no other computer can. Is there a way of making the B&W G3 accessible to every computer on the local network?
Not really. You should get a real router, instead of using the iBook internet sharing.
The problem is that your B&W G3 is on a totally different subnet private from everything else. All the typical descovery protocols will not cross a subnet boundary, so only the iBook has access to the B&W G3.
If ou get a real router (they are dirt cheap), and have everyone going though the same router, then everyone should see everyone else.
If the reason for using the iBook is to act as a WiFi range extender, then get a dedicated range extender, or get a pair of PowerLine Ethernet Adaptor that will route ethernet signals through you home electrical wiring. -
Trying to connect to the net through Ethernet
Here's my situation:
I have a LAN using Sitecome Homeplugs, which create a network using the existing electricity network: from the modem runs a wire to one Homeplug unit (which is plugged into the wall socket), and two of my computers (both Windows XP) are connected to their own Homeplug units. At first it didn't work, but then I set the LAN setting for those two to Automatically assign IP-address. That's all there was to it.
Now I'm trying to do the same thing on my iMac. I have my unit plugged into the socket, the cable plugged into the Ethernet port. In the Network Status it says: "Built-in Ethernet is currently active. Built-inEthernet has a self-assigned IP-address and may not be able to connect to the internet." How do I set this up? I've looked everywhere but I couldn't find anything.
P.S.: I used to connect through a wireless Airport network. Might that have anything to do with it? (Like past settings?)Yes it is, very perceptive.
Find IP on computers...
http://www.helpdesk.umd.edu/topics/communication/ethernet/office/winxp/2882/
Try setting the Mac to Manually instead of DHCP in Networks>TCP/IP>Configure IPv4.
Like
IP: just one or two diff from the two PCs.. maybe 10.0.0.146
Mask: 255.255.255.0
Router: 10.0.0.138
May also need these in Network>TCP/IP>DNS Servers:
208.67.222.222
208.67.220.220 -
Cannot connect to the internet through my Airport Card, while in Windows 7
Alright, so I wasn't sure how best to give a topic heading for this, but i think thats the jist of it. Basically I have Windows 7 on hard drive and am able to boot up my Macbook Pro (Early January 2011). Everything seems to run the right way, however I am unable to figure out what is causing the Windows 7 to either not recognize or not connect to my wireless network in my house. It is passworded and everything, however nothing I tried would work and allow access to the internet to my Windows 7.
I've read over some things online, and tried to figure out if there was some driver or something that I was missing that needed to be there, however I couldn't seem to find any answer to the problem. When I go to configure the network connecting and such, I get a message saying that apparently the hardware or something is missing, however I am unsure how or where I can go to get the info or not.
I'm guessing that using Bootcamp to install Windows 7 is probably the actual way I'm meant to do this, however I'm trying not to have to partition the computer, though I fear I may have to. Basically what I've done is booted up my computer from the Windows 7 install disc, and used it, like you would a Mac OS disc, to reformat my internal hard drive into working with Windows 7. This is probably an unorthodox method, but my dad had looked up that I couldn't install Windows 7 onto my external disk, and that this would be the alternative to have a more 'native' Windows running, rather than having to use Bootcamp.
My questions to you guys out there, are:
Should I reformat/reinstall Mac OS 10.6 Snow Leopard, and simply use bootcamp and its utilities and such to run Windows 7 through my computer? OR is there something I'm missing that I needed to download to allow Windows 7 to recognize my Airport Card, or whatever is needed to access the Internet.Try clearing your cache and cookies.
# Open the Tools menu, then select Clear Recent History... .
# In the '''Time Range to clear:''' drop-down, select '''Everything'''.
# Click the arrow next to '''Details''' to display the list of items that can be cleared.
# Select both '''Cookies''' and '''Cache'''.
# Click Clear Now .
Or you can try creating a test profile to see if it happens on that profile as well. See [[Managing Profiles]] -
I cannot connect to the internet in my home with my new 4g itouch and new d link router
I have gone to the router manufacture and walked through the set up, no luck. I tried the troubleshooting pages for the itouch. I am still shut out. I see the ssid and the lock I use the password still no luck. It works in other locations, but downloads are slow.
- Try resetting your iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Power off and then back on your router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections -
I cannot connect to the server – screen sharing, Server Preferences,...
hello
I have a problem with xserver. Everything seems to be working ok, however, one day system started to break down.
I cannot connect to the server through *screen sharing* neither through internet, nor through local net. Even after restart login wont shows up.
I cannot also connet to the *Server Preferences* (Unable to authenticate to the Open Directory master.)
Sometimes I cannot also connect to the *Server Admin* (but after restart it works, however, Server Preferences are unavailable).
SSH works ok.
Nor repair permission, neither verify disk, or update for OS X server 10.6.4 worked.
system log periodicaly enters this message:
Jul 14 23:24:35 xserve WindowServer[5091]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jul 14 23:24:35 xserve com.apple.WindowServer[5091]: Wed Jul 14 23:24:35 xserve.sk WindowServer[5091] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jul 14 23:24:36 xserve com.apple.launchd[1] (com.apple.RemoteDesktop.agent[5096]): posix_spawn("/System/Library/CoreServices/RemoteManagement/ARDAgent.app/Content s/MacOS/ARDAgent", ...): No such file or directory
Jul 14 23:24:36 xserve com.apple.launchd[1] (com.apple.RemoteDesktop.agent[5096]): Exited with exit code: 1
Jul 14 23:24:36 xserve com.apple.launchd[1] (com.apple.RemoteDesktop.agent): Throttling respawn: Will start in 10 seconds
Jul 14 23:24:36 xserve loginwindow[5085]: Login Window Started Security Agent
Jul 14 23:24:36 xserve loginwindow[5085]: Login Window - Returned from Security Agent
Jul 14 23:24:36 xserve loginwindow[5085]: AuthorizationRef returned errAuthorizationDenied. Exiting.
Jul 14 23:24:36 xserve com.apple.loginwindow[5085]: AuthorizationRef returned errAuthorizationDenied. Exiting.
Jul 14 23:24:36 xserve com.apple.launchd[1] (com.apple.loginwindow): Throttling respawn: Will start in 3 seconds
Jul 14 23:24:36 xserve com.apple.ReportCrash.Root[4982]: 2010-07-14 23:24:36.505 ReportCrash[4982:350b] Saved crash report for ManagedClient[5099] version ??? (???) to /Library/Logs/DiagnosticReports/ManagedClient2010-07-14-232436localhost.crash
can you advice me?
thanksHi Shannon McLain,
Kindly let us know if there is any specific error message that you are getting while installing it.
Here is what you can try:
Creative Cloud Help | Download, install, update, or uninstall apps
https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
https://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html
Kindly share the results once done.
Thanks,
Atul Saini
Maybe you are looking for
-
ITunes ranodmly loses the location info for my songs. How can I stop this from happening? How can I get all of my song locations linked back to iTunes without individually pointing to the location of each one?
-
Specs: OS: Win 2003 Sp1 Oracle 9i - rel2 (9.2.0.5.0) I had something like 200 users and dedicated tablespaces associated to them. Eventually, I ran into a usual very natural and obvious problem of -running low on disk space. So I took a task to free
-
Automatic Scheduling of Transports
Hi, Is there a way in NWDI for automating the released transports from DEV to QA on a schedule? And also control them from QA to Prod? -Aarthi
-
There are four tables for me Table_A TAble_B TAble_C TAble_D Table_A ID number mn_nbr Varchar(8) Table_B ID number sec_NBR varchar(3) Table_C MN_NBR VArchar(8) SEC_NBR VArchar(3) m_mn_nbr Varchar(11) m_sec_nbr VArchar(3) Table_D m_mn_nbr VArchar(11)
-
Download Firefox 7.0 (currently running out of date version) Click to open file Click Run to start running file Ask for Admin password Will not go further into installing Please advise.