I cannot create new tabs

none of the methods to create a new tab work. I try ctrl t, clicking on the new tab button and under file new tab and none of these work.

The Ask Toolbar is causing that in the Firefox 3.6.13+ versions. Uninstall that extension.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

Similar Messages

I was updated to 3.6 and now I cannot create new tabs. Neither the plus sign or cntl + T will open a new tab. If I right click and choose "open in a new tab", however, the tab opens just fine.

I've tried restarting the system, but decided not to uninstall/reinstall firefox, just in case I lost all my bookmarks and favorites. The restart did not solve anything. Also, I have colorful tabs add on and it was updated today. I disabled it, but that did not help either.

Uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox that prevents new tabs from being opened.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

Adobe Flash Player 11.3.300.265 cannot open new tab in Firefox 14

Cannot open new tab after updating adobe flash player to 11.3.300.265 in Firefox 14.01
Reinstall Adobe Flash Player to earlier version 11.2.202.235 and everything work fine with Firefox 14.01

If you keep having problems then try a new profile.
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If the new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

After upgrading iPad 2 to iOS 7 , cannot open new tabs in safari . When pushing on " " , Safari close the application .

After upgrading iPad 2 to iOS 7 , cannot open new tabs in safari . When pushing on " " , Safari close the application .

Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

Create new tab in header using badi ME_GUI_PO_CUST for tcode ME21N

Dear all,
i have implemented method SUBSCRIBE in ME_GUI_PO_CUST to create new tab in ME21N,
but the tab is not coming
following is the code snips, please tell where is the error, or some setting needs to be done
method IF_EX_ME_GUI_PO_CUST~SUBSCRIBE.
DATA: ls_subscriber LIKE LINE OF re_subscribers.
if sy-tcode eq ' ME21N' OR SY-TCODE EQ 'ME22N' OR SY-TCODE EQ 'ME23N'.
CHECK im_application = 'PO'.
CHECK im_element     = 'HEADER'.
CLEAR re_subscribers[].
ls_subscriber-name = 'Customer-Data'.
ls_subscriber-dynpro = '0101'.
ls_subscriber-program = 'SAPLMEGUI'.
ls_subscriber-struct_name = 'MEPO_SUBSCRIBERS'.
ls_subscriber-label = 'Customer Data'.
ls_subscriber-position = 10.
ls_subscriber-height = 7.
APPEND ls_subscriber TO re_subscribers.
ENDIF.
endmethod.
Regards
Sumodh

Hi...I hv similar requirement.
I need to show a custom field in the screen for the items.
I tried using the methods "SUBSCRIBE" and "MAP_DYNPRO_FIELDS" as explained in the sample code.
Below is my code. I have copied the sample code and changed it lil.
Method "SUBSCRIBE":
DATA: ls_subscriber LIKE LINE OF re_subscribers.
we want to add a customer subscreen on the item detail tab
CHECK im_application = 'PO'.
CHECK im_element     = 'ITEM'.
each line in re_subscribers generates a subscreen. We add one subscreen in this example
CLEAR re_subscribers[].
the name is a unique identifier for the subscreen and defined in this class definition
ls_subscriber-name = subscreen1.
the dynpro number to use
ls_subscriber-dynpro = '9000'.
the program where the dynpro can be found
ls_subscriber-program = 'SAPLZMMPO1'.
each subscreen needs his own DDIC-Structure
ls_subscriber-struct_name = 'ZMM_PO_CUST_SCREEN'.
a label can be defined
ls_subscriber-label = text-t01.
the position within the tabstrib can be defined
ls_subscriber-position = 13.
the height of the screen can be defined here. Currently we suport two screen sizes:
value <= 7 a sevel line subscreen
value > 7 a 16 line subscreen
ls_subscriber-height = 7.
APPEND ls_subscriber TO re_subscribers.
method "MAP_DYNPRO_FIELDS":
FIELD-SYMBOLS: <mapping> LIKE LINE OF ch_mapping.
*- customer fields
CONSTANTS: mmmfd_cust_01 TYPE mmpur_metafield VALUE 90000000.
LOOP AT ch_mapping ASSIGNING <mapping>.
    CASE <mapping>-fieldname.
      WHEN 'CLMNO'. <mapping>-metafield = mmmfd_cust_01.
    ENDCASE.
ENDLOOP.
I created a function group - "ZMMPO1" and created the subscreen 9000 in that. I placed the custom field in that screen. Tha main program of ZMMPO1 is "SAPLZMMPO1".
I created a structure also - "ZMM_PO_CUST_SCREEN".
I want to know whether this is sufficient to display the tab on the screen or am I missing something.
It is mentioned that the implementation of "ME_PROCESS_PO_CUST" is a pre-requisite.
could you lemme know the process please.
Thanks,
Ram.

Cannot create new folders in Outlook

I just bought a new PC computer. I installed MSFT Office Professional Plus 2010. I opened Outlook and added in (i) the pst folder I had set up from my previous Vista
computer (also with Outlook 2010), (ii) my hotmail account, (iii) my at&t/yahoo account and (iv) my gmail account. I cannot create new folders in any of them.
When I right click anywhere in the navigation pane and select "New Folder..." I get the following error message:
"Outlook cannot read the registry information.
-Close and restart Outlook.
-Reinstall Outlook
-Reinstall Microsoft Exchange or other e-mail system."
I tried all three, including removing and reinstalling Office and removing all of the email accounts/pst files and re-adding and still have the problem.
If I try to right-click properties on any of the accounts, I get the same error message, with the following additional language first:
"Cannot display 'General' page. This page will remain visible, but is not available."
Not sure what is left to try.
Appreciate any ideas.

Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, If the PC from clean install, you can follow these steps to test this issue.
1.
Start the Outlook in safe mode,
Press and hold the CTRL key,
and then click Outlook.
If the problem does not occur in the safe mode, this issue might be related to some third-party add-ins in the Office program, we can try to disable them.
2.
Create a New profile & PST file to test this issue
If this problem does not occur in the new Outlook profile & PST, the old Outlook profile is corrupted. We can delete that and use a new Outlook profile.
3.
Make sure the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office
key permissions to allow full permissions to all users
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might
occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how
to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756  How
to back up and restore the registry in Windows
a)
Exit Outlook if it is running.
b)
Click
Start, and then click Run. Copy and paste (or type) the following command in the
Open box, and then press ENTER: regedit
c)
Locate and select the following key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office
d)
On the
Edit menu, click Permissions.
e)
Click the registry key for the user who is currently logged on, and ensure that
Read and Full Control permissions are both set to
Allow.
f)
Click the Advanced button, ensure that the user who is currently logged on is selected, that
Full Control is listed in the Permissions
column, and that This Key and Subkeys is listed in the
Apply to column.
g)
Click to select the Replace permission entries on all child objects with entries shown here that apply to child objects check box, and clear
the check box
Windows 7: Include inheritable permissions from this
object’s parent
Windows XP: Inherit from parent the permission entries that apply to child objects. Include these with entries explicitly defined here.
h)
When you are prompted to continue, click Remove.
i)
Click Apply, and then click Yes when you are prompted to continue.
j)
Click OK, and then click OK again.
k)
On the Registry menu, click Exit.
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHNPlease remember to mark the replies as answers if they help and unmark them if they provide no help.

Cannot create new folder?

I have just moved to a new hosting and have connected to it
and I can edit files. When I try to add a folder to the remove I'll
get
"An FTP error occured - cannot create new folder .
Access denied. The file may not exist or there could be a
permission problem".
Any idea?

Hi,
Did you make any changes before the issue appears?
Before going further, you may try the
system restore to go back to a previous status and check the result.
Tracy Cai
TechNet Community Support

Cannot Create New Mailbox

Hi all,
First of all I already create a similar thread : http://social.technet.microsoft.com/Forums/en-US/b8f88745-ca79-43f9-8857-3b87781e5c19/rbac-to-create-mailbox?forum=exchangesvradmin
I got a problem in my Exchange Server 2013 environment. I cannot create new mailbox (new user) from ECP. But I can create new mailbox and choose existing user.
Active Directory operation failed on DC.mydomain.com. This error is not retriable. Additional information: Access is denied. Active directory response: 00000005: SecErr: DSID-031A121F, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0
already try with no luck :
re-inherit the permission.
setup /prepareAD
I create new user and assign Org Management & Domain Admin
how to check whether the permission in my AD is correct ? or any idea should I start troubleshooting ?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Krisna Ismayanto | My blogs: Krisna Ismayanto | Twitter:
@ikrisna

solved by executing setup.exe /preparedomain
and I found one of the server in container ADSIEdit were disabled inheritance. execute setup.exe /prepareAD, reboot the server (because it
ask for it), then execute setup.exe /preparedomain
cheers ! :)
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Krisna Ismayanto | My blogs: Krisna Ismayanto | Twitter:
@ikrisna

BO4 - cannot create new universe connections

Hi,
In Universe Design Tool, trying to create new universe connections but not allowing this.
Doesn't show all the data access drivers we have installed.
Can migrate connections fine from XIR2 fine and reports run O.K
Why cannot create new universe connections
Many Thanks

Hi,
there are some notes about this in the knowldge base. Here are a couple:
For ODBC, Note 1272557 - Data Access Drivers missing while creating a new connection in Designer
for JDBC, Note 1481410 - JDBC Drivers do not appear in the List Of Drivers when Creating a New Universe Connection in Universe Designer
Can you hit www.service.sap.com/notes to look them up?
Regards,
H

Cannot open new tab or addons page

Hi!
After upgrade Firefox from version 26 to 27 or 27.0.1 I have strange issue.
I Cannot open new tab, when I`m clicking on the plus button or CTRL+T key combination blank space is visible between tab and plus button (see attachment).
Also, I can`t open Addons page.
I`ve trying to run Firefox in safe mode, deleting Profile, reseting to default settings, disable hardware acceleration.
None of above helped :(
http://i57.tinypic.com/6tlrth.jpg

Hello MMpl, any luck if you delete the [http://kb.mozillazine.org/Localstore.rdf localstore.rdf] file in the [http://kb.mozillazine.org/Profile_folder_-_Firefox#Windows profile folder] ?
http://kb.mozillazine.org/Corrupt_localstore.rdf
thank you

After upgrade to 6.3.4 cannot create new bookmarks by dragging nor open existing bookmark properties

Just upgraded to 3.64. Now I cannot create new bookmarks either by dragging a URL or trying to create a new one in organize bookmarks. For existing bookmarks when I hit properties on the pop up menu all I get is a title bar that says "bookmark properties for (name of bookmark)" but I can't resize it or otherwise manipulate the title bar to access information or change the properties

Hello Victor.
You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

I cannot open new tabs in Firefox, either with CTRL+T or with the mouse right click or click on the tab icon.

I cannot open new tabs in Firefox, either with CTRL+T or with the mouse right click or click on the tab icon.

I have this problem as well. I could not see the ask toolbar in firefox, yet in the add or remove programs it was installed. As soon as I uninstalled it, I could open tabs again!
Thanks guys!

HT5577 i bought recently a second hand apple i phone 4s but now i cannot creat new apple id

i bought recently a second hand apple i phone 4s but now i cannot creat new apple id .

I suspect you're referring to the 3 free iCloud account limit on an iOS device. If so, there's no way around this. Once that limit is reached, you'll have to create the iCloud account on another iOS device or computer, then setup that account on your phone.

AME iExpenses: Cannot create new approver group

We need to set up approver groups for iExpenses. I assigned myself Approvals Management Administrator and Aprovals Management Business Analyst roles. With these roles I can create new attributes and conditions. However, I cannot create new action types and approval groups. The create button for the approval group just does nothing.
What am I missing? We are 11.5.10.2, AME.B

Pl see if ML Doc 420387.1 (How to Create the Approval Transaction Type for AME.B or higher ?) can help
HTH
Srini

Cannot create new LWP?

To test my Server process, I make a Client process to send numerous requests by creating one-connection-one-thread.
Under same amount of connections (such as 50 connections), indefinitely, the process will be error as follow:
libthread panic: cannot creat new LWP (PID:XXX LWP 2) stacktrace:XXXXXX
my question is:
If there are limits of LWP in a process?
I use unbound thread and let the kernel to balance threads between LWP, must I use bound thread?

I've seen this when my program used a lot of file descriptors. Using truss I could see that a call to open /dev/zero failed and a libthread panic message was displayed. Try using the ulimit command to increase your limit on open files.

I cannot create new tabs

Similar Messages

Maybe you are looking for