I Cannot do "Copy-Paste" file?

Dear Friend...
I Cannot Do "Copy-Paste" File. And Error message pop and say: "Error - File Integrity Violated!".
So... What is that meaning?
Please Answer me
Thank You...!!!

hy,
If you have any fast copying software( Teracopy) then uninstall it. After uninstall complete reboot your computer and try copy-paste again
Good luck
feroz syed ;)
thanks a lot

Similar Messages

Can you copy/paste files from the Finder to Mail in Lion, or drag them onto the Mail icon in the Dock to create a new message and attach the files to it?

Message title says it: Can you copy/paste files from the Finder to Mail in Lion, or drag them onto the Mail icon in the Dock to create a new message and attach the files to it?
I can't find anything in the Knowledge Base that says these two options no longer work or still do.
I do not have a system capable of running Lion, but I need to know the answer nonetheless.

Gee, I don't know: "paste attachments mail Lion"? ;-)
One further question, if I may: in Panther (which is where I've aggregated nearly 7 years of mail), if you copy more than one file in the Finder, switch to Mail, and paste the files into a new message, only the file names paste in. If you copy one file and paste it into a Mail message, you get the file, not just the name. Is that still true, or has that (IMHO) bug been fixed since 10.3.9?

Copy&paste file names when bouncing

too bad, after upgrading to 7.1.0 it is still impossible to copy&paste file names when bouncing, as was no problem in LP6! That´s very time consuming for me, because for film music I usually have long file names that contain smpte codes. Does anybody have a shortcut?

Hi Orbanl, I was going to post this myself and then found your post so will add to it.
'It used to be in Logic Pro 6 that normal copy/paste worked in the 'name' field of the save and bounce windows (even kept them seperate as far as clipboards went). Now, in Logic 7.1 the only way I can initiate a copy or paste when saving the song or naming the bounce is a right mouse click (cntrl-click)? to bring up these options. Are there no key commands for the navigation services anymore? This is a huge time killer for me as I often save 60~100 files with the same root name and was able to quickly initiate and save/bounce without stopping to pick up the mouse (now I have to switch back and forth between the keyboard and mouse to initiate, name copy+paste and modify name). Thanks in advance.'
Over at the Logic Pro Forum, Peter suggested in response to this post that the Pro App Support update v3 might have something to do with it as his Logic 10.3.9 DOES support normal copy/paste commands! Unfortunately I am running 10.3.8 and the Pro App update v3 specically notes 10.3.9 as its requirement. The only reason I have not upgraded to 10.3.9 is I use a lot of esoteric shareware music software and I understand 10.3.9 had some 'sprinkling' of Tiger in it that at least for several friends of mine broke older app's that were running fine in 10.3.8.
Here is the link if you are running 10.3.9.
Pro Application Update 3.0

I cannot get Copy & Paste to work in iOS 5

I cannot get Copy & Paste to work on my iPhone or my iPad since updating to iOS 5.1
I can copy and paste within an app, buy copying from one app, then going into another, Paste is not available.
Anyone one else having this isuue? I have tried rebooting both devices but no change.

I just checked this out by opening a doc in PlainText and copying some sameple text that I typed. I hit enter a couple of times, pressed on the screen, the paste button appeared and I was able to paste no problem.
I then opened a fresh document in Pages and pressed on the screen to open the paset button and got the text to paste into the Pages doc with no problem.
You may have a glitch in your iOS 5.1 update. You might try doing a reset all settings reset and set the phone as a new one (You should not lose any data, or media) You will need to go in and reset any changes you may have made in settings as this set all of them back to factory defaults but your music, pictures, data, email accounts etc. will not be erased.
If this doesn't work you may need to reinstall the iOS again.I think you can do this through iTunes but am not 100% sure. You may need to take it to your local genius bar (Hope you have one close to your house) and ask them to reinstall the OS for you.

Copy/pasting files in finder?

After using OS 9 for a while, and growing accustomed to the quirks and how to move around in it, I've found that there is no way to copy and paste files for the purpose of...........well copying them and pasting them somewhere else. I've found that if I want to copy a duplicate of a file somewhere else, I must first duplicate the file in the location that it's at, and then, move the duplicate to the desired location. Then, once the duplicate is where I want it, I must deal with the fact that the file name is appended with "copy" on the end of it, and rename it if it bugs me.
Now, this is all fine and dandy, until last night, when I had a bunch of music files on a USB flash drive that I wanted to import onto iTunes (that's iTunes version 2.0.4
I found that when I plugged the flash drive in, it mounted on my desktop. I opened the flash drive contents, and saw my music in it's own folder. I thought I'd just drag and drop the folder of songs into iTunes. I did, and it seemed to work. But when I ejected my flash drive, iTunes didn't know where my songs were -- go figure they were nowhere to be found on my hard drive, but instead iTunes was just reading them off of the flash drive.
So, I deleted the broken song links from my iTunes library, and reconnected my flash drive. I then dragged-and-dropped the folder of songs onto my desktop, which took about 1 second.......strange I thought. I control-clicked on the folder on my desktop, and it indicated that it was still stored on my flash drive. I even tried moving this folder to my root Macintosh HD level, and it went in instantly, but it seemed as though it was just an alias of the folder. If I ejected the flash drive, the folder would disappear. If I put the flash drive back in, it reappeared.
Finally, I moved the alias-like folder to my desktop, control+clicked on the folder, and chose "duplicate." 10 minutes later the duplicate was on my desktop, and both folders were registering that they were stored on the flash drive. But, I moved the duplicate folder to /documents/itunes/itunes music, and then they seemed to actually go to my hard disk. I ejected the flash drive, and the first folder went away from my desktop, but the duplicate ones were still on my hard disk (whew!) and I was able to add the folder to library successfully.
Now, luckily I had enough extra space on my flash drive to do this operation, but if not, I'm not sure how I could have moved these files onto my hard disk without duplicating them, and moving the duplicates. Did I miss something? Or is this just the nature of the beast?

Hi, sapranojam85 -
That is the nature of it.
The desktop is shared turf. Every mounted volume has a desktop - it's an invisible, transparent, always open folder. Imagine them stacked one on top of the other, like layers - the mouse has the ability to ignore the layers, but the files (the icons) do not.
When you drag an item out of a mounted volume's icon, it is dragged onto its own desktop - and is not actually copied anywhere, nor moved to a different volume. When the volume is dismounted, the files go with it, since the desktop later they are on is still part of that volume.
The solution - drag the files into a folder belonging to your hard drive (such a folder can be on the desktop, because it will be on the desktop layer belonging to your hard drive), or drag the folder of them onto the icon of your hard drive. Doing that will copy them to the hard drive - and they'll stay behind when you dismount the other volume.
Another way which should work better in this case...
When you hold down the Option key and drag an item (file or folder) to a new location, the item is copied to (duplicated at) the new location. If this new location is in a folder or place other than the original folder, the term "copy" will not be appended to the name of the item. And, if the destination is the desktop, the item should be placed on the dekstop layer belonging to the boot volume.
So, if you hold down the Option key and drag a folder from your flash drive to the desktop, the folder should be copied to the desktop layer belonging to your boot volume (your hard drive), and should not have the term "copy" appended to it.
A quick way to verify if such is successful without unmounting a volume to check, is to do a Get Info (Command-I) on the copied folder - the "Where" info line in the Get Info window will tell you which drive the item is on.

Is there a way to move (not copy/paste) files between HDs w/out command?

I use external HDs a lot, so I move files from the Mac HD to to these external HDS but I always have to delete the source file after the copy/paste process is done I know I can push the command key and move them but I use my mouse more then anything and I would like to not use the command key. I've tried to use automator but for some reason the action quits working after while so I need to redo it-which gets annoying, but so does having to constantly copy/paste everything. So is there a way to achieve move with out copy/paste and automator? If there is, could let me know what that little delightful technique is?

I use the following 3rd party cut/paste apps - CopyPaste Pro & iClip. Both you can use either the mouse or key commands.

Cannot copy/paste files from clone of Snow Leopard installation into clean Lion installation.

I cloned my hard drive onto an external USB drive using disk utility and then erased the internal drive to install Lion onto. 70% of anything I copied from the clone of my 10.6 installation into its new home in Lion just disappeared as soon as I copied it. For example, I copied my old documents folder into its corresponding place in Lion, and the size reduced from ~3.5GB to ~1GB. Does anyone know why this is?
For obvious reasons, I restored my clone to my internal hard drive using disk utility so I could use 10.6 again, so I can't reasonably do any real troubleshooting until I find time to commit to experimentation. Is this a known bug that will be worked out in 10.7.1?

2009 with mountain lion isntalled
The original disc that came with the Mac won't work with Mountain Lion v10.8 installed. Disk repairs are done via the internet using OS X Recovery.
Since the Mac won't boot, restart while holding down the Command + R keys so you can access the built in utilities to repair the startup disk > OS X Recovery

"File Not Found" on copy/paste files!

I had one big "real instrument" file that I decided to split into several smaller files. To do this, I would copy a section, paste it into a new file I had created, saved the new file, and then delete the original.
Now, when I try to open them, only a few will actually play. The others say "Audio File 'Recording#04.aif' not found,'" the Recording# varying with the tracks. It gives me the option to either "skip" or "search," the latter leading to a message that says the same thing, only this time with an exclamation point at the end. I then click "continue," which brings me to the file with a purple track section the same length as the music that used to be there, only now saying "file not found" and without any music on it.
Is there any way to retrieve these files?? It happens with 7 of the 10 files I did this with.

I dont have the latest version of GB. I have whatever version is on a 2010 macbook pro.
That would be some version of GarageBand '11, but did you ever run Software update, to be sure to have the latest GarageBand '11 version compatible with your 2010 MacBook? You can check the version number of any Mac application from the "About" panel. In the main menu bar click the name of the application in the upper left corner of the screen and select the menu entry "About ...". This will show the version number.
GB doesnt crash....the files just seem to go missing.
How much free disk space do you have? Running out of disk space could explain what you are seeing.
Do you have the latest driver for your audio interface installed?
Check the manufacturer's page: http://tascam.com/product/us-144mkii/downloads/
I can find crash logs....but the tracks are useless....i cant edit them or anything.
Do you mean you found the audio files in the "Media" folder, when you open the package? Then try to copy the audio files out of the package, and drag the copy back to the guitar track. Do they play?
Should i upgrade to the latest operating system and the latest version of gb??? Any help would be very much appreciated. 2010 macbook pro.
Upgrading to a different system and the newest GarageBand 10 will not help, if we do not know, what is causing the problems on your Mac. Run software update to make sure,you are running the latest update of your current GarageBand version.

CS5 does not let me copy & paste file names

Mac OS 10.5.8 Before upgrading from CS3 to CS5, I could open a folder of files, select one file, highlight the file name and copy it. I could then work on an image in CS3 and when ready, Save As. With the current name of the image highlighted, I could then paste in the name I had copied from the file in the folder. I can no longer do this with CS5. Any idea why I can't?

The only time I see this is when I'm having issues with Finder. Since the "copy" part is done in Finder and the "paste" is done from the Finder clipboard, It would appear to be that something in Finder is not putting the file name onto the clipboard.
I can do what you describe with no trouble, in CS5, but on Snow Leopard.
I've had similar troubles in Finder and with Office apps as well, when renaming files from the clipboard. Usually a quick relaunch of Finder cures it. If it doesn't, a reboot will.

Cannot play copied itunes files

I just got a new laptop (pc) and I copied my itunes library to a flash drive. I copied all the files into what I thought was the correct folder, however, everytime I go to play a song it says I have to locate the file - and then I have to select it. I don't have a huge library, but doing that with over 2000 songs is going to be a nightmare. After the fact, I made sure to check the "copy songs" in advanced preferences, but it won't apply to those I already copied. Can I delete them and start over? Or is there a fix now? Any info/tips would be appreciated! Thanks!

There are codecs in the Windows version of Windows Media Player which do not exist on a Mac, so perhaps that's the issue.
But you say you tried VLC Player and MPlayer, but not that you've tried the Mac version of WMP, so if you haven't, give that a try. If that doesn't work, one last thing to try would be WMV Player. It's not free, but they have a free trial so you could see if it worked for you.
If none of those solutions help, then I can only guess that the files are encoded in a codec for which no Mac version exists. When you get stuff from Acquisition or any other P2P network, there's no knowing what sort of hash you'll end up with.
Don't Steal Intellectual Property! Please make sure that all material (songs, movies, etc.) you obtain from P2P networks are legal, not pirated.

Cannot browse/copy iMac files from my MacBook Pro; REALLY FRUSTRATING...

Hi folks,
Wondering if anyone could help me out here??
I can browse and copy MacBook Pro contents over to iMac (from Finder within iMac). Unfortunately i can't do the same, other way around. Can neither browse nor copy content from iMac to MacBookPro (from Finder within Mac Book Pro).
File Sharing has been turned on both on MacBook and iMac. Users have full access including administrators. Full Read/Write permissions on all files within the folder that i want to share have been granted. Firewall is turned off on both computers.
On MacBook Pro Finder, the iMac appears under SHARED on the left column. But when one clicks it or presses the button 'Connect As' - the following error always appears.
"The Server "Michael Newham's iMac" is available on your computer. Access the volumes and files locally." (Obviously they're not available locally.
I've used the Go - Connect to Server drop down option using afp and ftp access, but nothing there either. Both machines have Leopard 10.6.2
So I'm a bit flummoxed
Would appreciate some help.
Mike Newham, Tipperary, Ireland.

Turning ON and Off FileSharing on both machines seems to solve the issue.

I can't copy and paste files in finder arrrgghh

Ok im not the most tech savvy person around and this is my first imac, I dont operate windows on it and am stumped. I am trying to transfer my movies onto a media player and external hard drive but it just wont do it. when I just had my previous pc all I had to do was copy and paste and am ready to scream. Does anyone have any answers????

I don't think this is necessarily a disk format problem. I've been noticing the same thing the past few weeks. I used to copy and paste files frequently using the Finder but it no longer works. I have the Copy option in the contextual menu when a file is selected but I no longer have a Paste option after doing the copy.
All mounted drives on my system are formatted Mac OS Extended and the operation fails even when attempting to copy files residing on the boot drive to another folder on the same boot drive. Digging around for a cause/solution now.
UPDATE:
The problem in my case was an application called Clipboard Cleaner that strips all formatting from text you copy to the clipboard so you can copy from something like a Word doc and paste into an email without all the Word formatting coming along as well. It runs in the background and apparently disables the ability to copy/paste files.
Message was edited by: jdubfromtx

Can't copy/paste 2+GB vids to external drive.

I've got some videos on my iMac which are up to 11GB in size and I'd like to move them off of this comp in order to reclaim some space but when I try to copy/paste files that are about 2 or more GB in size to an external drive via USB it stops and gives me an "Error code 0". Smaller files have no problem pasting, just the heavy weight ones do. Anyone know what's wrong..??

is it Fat32? remember 4GB file size limit.
if not than, do the suggested by draggign them, as copy&paste method isnt the most secure and best way to transfer files.
the data cache of something that large may not have enough time to copy every file, so dragging simply buffers the process and creates that cache as it goes so all the files get accounted for and transferred.
goodluck.

Copy-Paste From Other Apps (like PPT 2004) Into CS5 Broken ? - OS 10.6.3

Hi,
New Mac, so to avoid problems went for the new post-Snow Leopard Photoshop CS5. Oops.
Copy-Paste From Other Apps Into CS5
Pasting images/photos from Powerpoint 2004 to CS5, I experienced the exact problem posted slightly off topic by james norrington in the thread "CS5 does not let me copy & paste file names." It was not answered and is quoted here:
---"I am using CS5 Photoshop and Office 2004 on 10.6.3. I was using 10.4 until a few weeks ago and it worked and still works with other macs in the office using CS4. I can copy and paste from powerpoint but it cuts the pictures in half and does not know what the res. of the image is. Also when I go from photoshop to powerpoint the image res. is also not preserved."---
Besides that, I also found copy-paste from a digital camera photo.jpg from Preview to CS5 doesn't respect the resolution either. Directly opening the photo into PS CS5, fine.
From the earliest PS, always was able to copy any image to clipboard, have a new document dialog box come up pre-filled with correct original WxH pixels, original resolution, color mode, etc., and just paste into the new document - perfect fit (even the oddball PPT 576 ppi). Now a shift and cut-off. Don't have PPT 2008 to test pasting from there.
I have also found that a similar but less severe image cut off happens when copy-paste from PPT -> Preview, or -> TextEdit, or -> drag and drop picture clipping.
Opening Image File in CS5
Even an original 300 dpi tiff file wrongly went to 72 ppi etc. when opened directly into CS5. Converted the file to a jpeg in Preview - that jpeg file could be opened into CS5 correctly, reconverted the jpeg to TIFF in Preview, still opened OK (not counting loss of image quality). Still couldn't copy paste from either document into CS5 correctly. One difference I noticed in the converted files was that more information was available in the Preview file info. Maybe that made the difference in opening the file correctly.
I'd welcome any suggestions. Thanks.
---detail of tiff file ---
original
     GENERAL
     Color Model: RGB
     Depth: 8
     DPI Height: 300
     DPI Width: 300
     Pixel Height: 1033
     Pixel Width: 1315
     TIFF
     Compression: LZW
     Photometric Interpretation: RGB
     Software: Image-Pro Plus
     Y Resolution: 300
After conversion to jpeg in Preview"
GENERAL
     Color Model: RGB
     Depth: 8
     DPI Height: 300
     DPI Width: 300
     Orientation: 1 (Normal)
     Pixel Height: 1033
     Pixel Width: 1315
EXIF
     Pixel X Dimension: 1315
     Pixel Y Dimension: 1033
TIFF
     Color Model: RGB
     Depth: 8
     DPI Height: 300
     DPI Width: 300
     Orientation: 1 (Normal)
     Pixel Height: 1033
     Pixel Width: 1315
----END---

Thanks to Chris for the explanation of the dueling clipboards.
It's still frustrating, but since I still have a CS2 license from the dead G4 the current Mac replaced, I can try that (wonder if they can coexist), or maybe I could use an older Mac for this particular situation.
As for the .tif file, it was generated by a Mac OS 8.5 era image capture program that we are forced to use, and the analysis was that the app does not properly encode the TIFF tags to acceptable standards. Preview 5.0.2 just guessed right from the little information that was included - but it didn't work when tried with Preview 3.0.9 on an OS 10.4 Mac. So this was a unique situation.

InDesign CS6 + Yosemite + Copy/Paste = Missing font

We use ITC Franklin Gothic throughout all of our pieces; it's installed and it's the default font setup. New and existing files have opened without issue until now. I opened an advertisement that needed to be resized, from our shared server and copied the contents. In a new document, I pasted the contents suddenly the font says it's missing. The images retained their links to the packaged folder on the server, the fonts just stopped working. I closed InDesign, then disconnected from the server in case there was some kind of conflict between the local font and the server font override from the packaged fonts folder (packaged from the local font installed, I made the source ad this same way). Loaded the new file, and got the expected missing links dialogue, but unexpectedly the fonts were still missing. I reviewed the missing fonts, and it was the entire family. I opened Suitcase, verified the fonts are active. Still no fonts in InDesign. Okay, disactivated font in Suitcase (maybe it needs an update), installed the font in Fontbook, need to get the ad done and I don't have time for this. Verified font works by opening a different file, making a new document, but as soon as I opened the ad with the missing the fonts, fonts go missing. I then changed the fonts to a different family, and tried changing them back, but the font doesn't even show in the list of fonts. I can't figure out why this particular method of copy and paste breaks the font. I've opened and created other files with this font family active, while this copy/paste file is open at the same time in another tab while it still says "no". The only work around I could use was to copy the entire packaged folder from the server to my desktop and just change the document properties to the size I need, then adjust the artwork to fit.
I'd like to find a resolution as to why copying and pasting broke this font even though the same missing font works fine simultaneously in a different document. Any suggestions/questions/thoughts/solutions would be very welcome.
System specs:
27" iMac (Mid-2011) 3.1 GHz i5
32 GB RAM
1 GB Video
10.10.2
Adobe InDesign CS6 8.1
Update: Looking through the font list, Franklin is being listed as a different font. Though the character palette, the font selected is ITC Franklin Gothic Std Book; the font listed in the Type drop-down menu is Myriad Pro, and once that was deactivated, Helvetica.

i don't see how that could be the case because I originally installed the font, created and packaged the ad, and the font is available for typesetting in a new document while this problematic document is open without being connected to the server.
I upgraded to creative cloud 2014 and this particular document is still a problem. This font issue is limited to this sole document. I'm guessing it has something to do with the copy and pasting. Tomorrow, I'll try replacing the font to something else and then copy/pasting it in the same way if it recreates the same problem with a different font.

I Cannot do "Copy-Paste" file?

Similar Messages

Maybe you are looking for