I cannot edit the Cross Dissolve in the Effects Control Panel in Premiere Pro CC 2014

If I put a film dissolve between two clips on my timeline, and then click on the film dissolve, I'm able to go to my Effects Window and drag clip A (Top Bar) to the right and trim lets say 3 seconds then go to Clip B (Bottom Bar) and drag to the left to take off lets say 10 seconds off the beginning of clip B.  That very method worked for cross dissolves until this latest update for CC 2014.  It forces me to use ripple edit in the timeline on each endpoint of each clip instead of flying through it in the effects window by clicking each dissolve in the time line.  It's just weird that they would take that out for only the cross dissolve which I prefer using more than anything and not the rest of the dissolves. Does anyone have a clue why? Or is this a bug?

That is correct. This is the only transition where the workflow has changed.
You can now make it into a preset.
BTW I dont use it often but i dont like it either not being able to adjust the cross dissolve in the EC.

Similar Messages

  • Markers in the Effect Controls Panel

    I'm up to page 165 of the Premiere 6 manual, trying to understand markers, and it says:
    Create markers in the Effect Controls panel
    In the Effect Controls panel, you can view all of the markers that you created in the Timeline panel. You can also add markers to your sequence to designate where you would like to place effects and see the markers as you work in the Effect Controls panel. In addition, you can create and manipulate markers directly in the Effect Controls panel.
    1. Drag the playhead to the place where you want to create a marker.
    2. Right-click (Windows) or Control-click (Mac OS) in the timeline ruler:
    In Premiere Pro CS5.5, and earlier, choose Set Sequence Marker, and then choose the type of marker you want to set.
    In Premiere Pro CS6, choose Add Marker, or press the M key.
    I follow those instructions to the best of my ability, and nothing appears in the Effect Controls Panel. The previous three paragraphs are labelled as CS5.5 and earlier. I'm wondering if this paragraph should also have been labelled as CS5.5 and earlier.
    In CS6, do markers appear in the Effect Controls panel? If they do, how do you get them to appear?

    Thanks Jeff. My Effect Controls timeline was hidden. I don't remember it even being there, but I suppose it must have been at some stage.
    Now, another Marker matter. At the bottom of page 165 it states:
    "Move a marker
    Do one of the following:
    To move a clip marker in a clip that’s in a sequence, open the clip in the Source Monitor and drag the Marker icon in the Source Monitor’s time ruler. (You can’t manipulate clip markers in the Timeline panel)."
    This is what I've done:
    In the Source Monitor I set up a marker for a particular clip. Three things happen.
    An empty grey Marker appears above the Timeline in the Source Monitor (that Marker disappears if I move the Playhead).
    Two green Markers appeared inside the clip in the Sequence Panel (those Markers stay put).
    The Marker details appear in the Marker Panel.
    I can cause the Marker to move if I change the In and Out points in the Marker Panel, but I cannot "drag the Marker icon in the Source Monitor’s time ruler." I can't see any Marker, except the empty grey one.

  • Autoscroll the 'Effects Control' panel

    CS4:  How do I get the Effect Control Panel to autoscroll like the timeline does?  The current time marker scrolls right off the end of the panel.

    You can't.

  • Where do the auto save in Adobe Premiere Pro CC 2014?

    I was just working in Adobe Premiere Pro CC 2014 and my computer shut down for some reason. I know my project had been auto saving throughout this morning, so I imagined there would be a backup of my project somewhere on my computer, but I couldn't find it in the usual places. Thus I wonder if CC 2014 is automatically configured to save somewhere in the cloud. However, when I check my files in the cloud, it says they are empty. Any suggestions for where to look so I don't have to lose the past few hours of my work? Thanks!

    Go to Project Settings/Scratch disks.
    There you will find the path where the auto saves are located.

  • Masking & Tracking Ellipse, Pen, and 4-Point Polygon (square) tools missing from the Effect Controls panel

    I am trying to mask a small area of some of the shots I am using for a small teaser.  The three tools that are supposed to present themselves on the effects tab when I select an effect such as "Brightness and Contrast" are not there.  Does anyone know another way to use these tools, or how to add them to the effects tab?

    What version of PPro are you running?
    Its only available on recent versions. Not sure 1st but CC2014.1 onward maybe .

  • I cannot find the Java Control Panel.

    I looked under System Preferences, and in the Utilities Folders, I did a soplight search, it is nowhere to be found. I installed JRE-7u21-macosx-x64, and it says it installed, but there's no evidence of it anywhere. I am unable to use a web start program (a ROES program) becuase it keeps telling my I need to install the JRE. The vendor I use that supplys the ROES program told me to look at the Java settings in "system preferences" but alas, it's not there.
    I am running OSX 10.8.3
    HELP!
    Greg

    Thanks Eric.. I found some terminal script that simply removed or disabled Java 7 and re-enabled Apple's Version 6, and that allowed me to launch the "Web Start" application I needed. But I will try to do the uninstall as suggested and see if that corrects things. Interestingly enough, there was an OSX update yesterday that listed Java as one of the patches, and yet it did nothing to fix the problem.

  • Re: Camileo X100 - cannot edit the files

    I bought the Camileo X100 and have been frustrated ever since i got it.
    I cannot edit the files with anything, Adobe premiere CS5 sees them as only Audio, Sony Vegas Studio HD 9.0 only see them as video with no audio.
    I've tried to convert them but, it converts with no sound and poor picture quality or with no video and just sound. VirtualDub gives me an error when i try to convert with it aswell. Quicktime still can't play them even after instaling the Divx package.
    It seems counter productive to make a camera that has codecs that are this hard to edit.
    I ran Gspot and it says H.264/Mpeg-4 AVC supposedly this is standard but, but the issue i think is that it's container is AVI.
    So my question is, should i return this camera? or is there a way to edit on Vegas or Premiere?

    I figured it out on my own. What you need to do is Download Windows Movie Maker 11. Import 1 file at a time and set whatever resolution you want (preferably the same resolution you brought it in as) But make sure when you're saving your video set the bitrate at 10000. So for example my video is 1920x1080, so my export is 1920x1080 at 10,000 bit rate and 30 FPS. With these setting there is absolutely NO loss of video quality. This will work with your S10 too. And the files become editable in Premiere CS5 and Sony Vegas. Have fun!

  • I have an iMac, and have a Verizon DSL account. Recently, my Mac Mail keeps requesting the passwords on my account every few minutes, and will not allow me to send messages using Mac Mail. I cannot edit the outgoing server; how can I send emails?

    I have an iMac, and have a Verizon DSL account (3 email addresses). Recently, my Mac Mail keeps requesting the passwords on my accounts every few minutes, and will not allow me to send messages using Mac Mail (the message says that the outgoing server was rejected. I cannot edit the outgoing server, and the keychain will not save my passwords (the ports are valid). How can I change the outgoing server to send emails, and how can I avoid having Mail request my passwords every 2 minutes? Verizon, as usual, will not provide support to iMacs.

    Is there an email saved in your drafts or outbox folder?  I suspect that Mail is continually trying to send it, and each time Google is rejecting the email message.
    You can open the message and then delete it from your Outbox folder.  Then try removing all @gmail email addresses from it and seeing whether you can send to the other folks.  I suspect that will work.
    With email, if an SMTP server *can* verify email addresses, sometimes it will and it will refuse to send messages.  If a message has to be relayed across servers, no verification is done, and you'll get a bounce if an email address is bad.

  • When I get an ICS from Outlook that is a multi-day event it populates my iCal as a single day and since I am not the owner I cannot edit the ICS.

    When I get an ICS from Outlook Express (Office is PC based) that is a multi-day event, it populates my iCal as a single day and since I am not the owner I cannot edit the ICS. I have to delete it and send a "decline notice" to the sender and re-enter it so I can put in multiple day events. Help!

    If you are running Tiger, you don't have time machine. 
    You need to get something like SuperDuper! or Carbon Copy Cloner (sorry, I don't have a handy link for CCC but you can Google it to get their site) to make a clone of your drive on the external and then do incremental backups.  The free versions do a lot and you can upgrade to the full-service versions for small change if you need more.  The one time I used SuperDuper! for cloning a volume it worked just fine. 
    (My backup application is the last PPC capable version of Retrospect, which does a credible job, or has over the past ten-twelve years.)

  • When I convert a PDF to a Word doc, it "converts" as a picture and I cannot edit the document. What can I do to get the PDF to convert properly?

    When I convert a PDF to a Word doc, it "converts" as a picture and I cannot edit the document. What can I do to get the PDF to convert properly?

    Hi conversionnewbie,
    Are you able to select the text in Word by triple-clicking inside the text box? (Sometimes text selections can be tricky in converted files.) If you can't select the text, then I'm guessing that the PDF was created from a scanned file (so the text becomes images). Make sure that OCR is enabled when you convert the file to Word. OCR is enabled by default in the ExportPDF web interface, but can be disabled in Adobe Reader. If you're converting to Word from within Adobe Reader, make sure that OCR is enabled and that the correct language is selected:
    Please let us know that works for you!
    Best,
    Sara

  • In iTunes I click on a song and when I click on the "get info" tab, it opens up but everything is gray - locked, therefore, I cannot edit the year or genre of the songs. Not every song is locked, only certain ones for some reason. Any help?

    In iTunes I click on a song and when I click on the "get info" tab, it opens up but everything is gray - locked, therefore, I cannot edit the year or genre of the songs. Not every song is locked, only certain ones for some reason. Any help?

    I ran into the same problem, I think that, If you tab on a song that is on your IPOD, and the song data is grayed-out, I think it means that the song is probably twice on your IPOD and that the iTunes directory can not edit THAT song data for two (or more) files @once. Check if this is the case, sinceI have the same problem,am looking for a way to have One and the same song in more playlists but only keep the song once on the IPOD.

  • Cannot Edit The Report

    Hi All,
    Please help me, I created an interactive report and made some modifications. THE PROBLEM IS that I cannot edit the records.
    http://apex.oracle.com/pls/apex/f?p=49631:1
    user: dev
    pwd: dev
    Thanks in advance.

    Thanks Ta,His handle is trent by the way, I m afraid you picked his salutation ;) .
    have to delete the auto-generated process. And now how can I make Edit works again.Go to "*Create Page Process -> Data Manipulation -> Automatic Row Processing (DML) -> give some process name -> Specify Tablename,Primary Key column, Item with PK , Check/uncheck required DML operations -> Specify button conditions*"

  • I have just dowloaded the icloud control panel on my PC and i am am able to see everything that has been pushed to icloud from my ipad. However i cannot see my email. i can send from the computer using icloud, but i do not see any mail that is being rec.

    i have just dowloaded the icloud control panel on my PC and i am am able to see everything that has been pushed to icloud from my ipad. However i cannot see my email. i can send from the computer using icloud, but i do not see any mail that is being received by my ipad, which is set up with my mail server. What haven't i checked lol?

    turn your ipad off by holding the sleep wake button for 5 seconds and slide to turn off then turn it back on and the apps should be finished and if the apps didnt finish just redownload them

  • HT201317 I am trying to upload photos from my Windows 7 machine, and I was told to drag them into the photo stream in the iCloud control panel. I have downloaded the control panel several times, but cannot find the place to upload the photos from my Windo

    I am trying to upload photos from my Windows 7 desktop, and was told to go to the iCloud control panel and drag the photos into the
    upload to photo stream icon. I have downloaded the contol panel several times and cannot find the icon to get this done.  HELP 

    If you're trying to add photos to photo stream on your PC, you drag them to your photo stream uploads folder (normally My Pictures\Photo Stream\Uploads).

  • I cannot get my MacBook Pro to print greyscale on my Canon MG6450. I cannot access the printer driver panel on the Macbook. So I am stuck printing everything in colour and cannot specify which pages I want printed.

    I cannot get my MacBook Pro to print greyscale on my Canon MG6450. I cannot access the printer driver panel on the Macbook. So I am stuck printing everything in colour and cannot specify which pages I want printed.

    Try resetting the printing system:
    OS X Mavericks: Reset the printing system
    Next try deleting the system and reinstall the printer..
    BTW this is Mac Pro desktop forum

Maybe you are looking for