I cannot encode .flv files from CS4 using AME

I’m having a problem encoding .flv files from Adobe Media Encoder CS4. All the jobs in the encoder encode for a period of time then stop about a ¼ of the way through the file.
I am encoding from a Matrox preset project at 1280x720p 59.94fps. Some clips have a luma corrector effect on them. After rendering, some clips will come up completely black on the timeline so I have decided to leave them unrendered. I don’t know if that is related to why I cannot encode a .flv file or not.
The settings I’m using for the .flv are:
.flv file, 720p, CBR, 3000kbps.
What’s strange is that I have encoded other .flv files from these same timelines but all have been smaller in screen resolution. That is the only difference. I can also encode .flv files from other projects without issue.
I don’t know why this is not working? Who can Help?!!!

OK, so if you do a quick SAVE AS to a new project, and remove the luma corrector, can you encode all the way through?
I have no experience with Matrox so I won't "go there".
MP

Similar Messages

Cannot Delete CPTL file from Desktop using Vista

Hi All,
I cannot Delete CPTL file from Desktop using Vista. Explorer
crashes. It is a Captivate 2 file.
I have tried (with no luck):
- logging in as a different user and deleting the file.
- running explorer as an Administrator
- uninstalling Captivate.
Anyone got any ideas?
Cheers,
Raef

Hi Raef,
That is a strange issue. Here are a couple more ideas you
could try:
- Have you tried renaming the file (including suffix)?
- Have you rebooted?
- Do you get any error messages when trying to delete, such
as "Acess Denied"?
- Is your machine networked? Is it possible someone else has
the file open?
- Can the file be moved to another location or put in a
folder (and then deleted)?
- Have you tried using the Command Prompt / DOS mode to
delete the file?
It sounds like it could be a Vista issue so I would look at
the Microsoft Vista forums too. Sorry I do not have an exact
answer.
IHTH,
Aaron

Streaming .FLV files from Media Server 4.5 using PHDS

I would like to stream .FLV files from adobe media server 4.5.
Requirements state that the files should be considered secret, so I decided that PHDS sounds like the
right thing.
I was able to stream an .FLV by placing it in the webroot/vod folder using an url like http://myserver/vod/test.flv
However the developer manual states that a way to enable PHDS at the server level is to uncomment the two lines like this.
<IfModule jithttp_module>
<Location /hds-vod>
    HttpStreamingJITPEnabled true
    HttpStreamingContentPath "../webroot/vod"
    JitFmsDirPath ".."
    Options -Indexes FollowSymLinks
# Uncomment the following directives to enable encryption
# for this location.
   EncryptionScope server
   ProtectionScheme phds
</Location>
</IfModule>
However I am not able to stream my FLV using url like http://myserver/hds-vod/test.flv
Question : Am I supposed to use the hds-vod in the URL or is /vod doing the same ?
                  Is the approach correct, or should the files go into an applications\myapplication\media folder ?
                  I will need some server side actionscript to validate access to the stream, is that possible without a dedicated application ?

Hi,
When you use the vod location directive you're basically using Progressive download so your URL is as : http://myserver/vod/test.flv
However, when you use the location directive hds-vod, it is HTTP Streaming, where the fragments are created on the fly. For this your URL needs to be as : http://myserver/hds-vod/test.f4v.f4m
Please note .flv files are not supported for HTTP streaming (via hds-vod location directive). You cannot use PHDS with .flv files.
Thanks,
Apurva

I cannot open pdf files from one supplier when using Adobe Reader but I can using another Viewer

I cannot open pdf files from one supplier when using Adobe Reader but I can open it if using Google PDF viewer or another viewer. The Adobe reader gives the error "There was an error opening this document. The file is damaged and could not be repaired" when I try to open the file. The version of Adobe Reader is 10.1.7, however I have tried other versions and they all fail the same way. I have tested on a number of different PC's in different networks and all fail using Adobe Reader but work using alternate viewer. Also the PC's will open a PDF from any other source.

Newer Reader versions are more strict than older versions (and other PDF viewers). If certain minimum requirements are not met, Reader will tell you that the PDF is damaged. This can happen when a document was created with software that does not adhere to PDF standards, or when the file was damaged during a download or email transmission.
You should contact the creator of these PDFs.

Am useing a PC. Have Photoshop CS5, suddenly cannot move Raw files from bridge (or anywhere else) into photoshop. Jpeg move into photoshop ok, did get error message 1 what do I do to correct this om bridge (or anywhere else for that matter)

Useing a PC
Have Photoshop CS5
Suddenly cannot move Raw Files from Bridge (or anywhere else) into photoshop.
I Can move Jpegs into ps the only issue is with Raw files
I did get error1 message but as do not know what that means its no help
any suggestions?

Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
I can open the RAW file only if I restart my computer - very annoying!
However, thanks for the advice about the video card & memory.
So, I'm still stuck as to what the issue is.

Using AMP to download and save FLV files from web sites?

I thought I had heard months ago that this new media player was going to allow you to download and save the FLV files from web sites like YouTube and others, where a direct download while possible, isn't the easiest thing to currently do. But I don't really see any way in this new media player to download and save files from web sites....it's plenty willing to play them if they're already saved on your hard drive, but I thought one of the reasons for Adobe building this was to make it easier to get them in the first place?

I'd have to agree. This is one of the most useless products I have seen from a company of this standard. Why they continue to provide this product as an example of what can be done with AIR, is bewildering. Myself and others have posted over and over again that the player deletes the saved movies at some random time, an hour or two hours after they appear to be saved.
What is the point of having a 'saved' icon the CD ICON if that movie will be deleted FOR NO BLOODY reason. I just wasted 400 mb of my quota dowloading moves 3 times...!! just to realise that the application deletes them from the VERY CACHE that it copies them to.
Adobe, if this is what I can expect while trying to view the tutorials for FLEX what will the development experience be like. Myself and others are fed up with posting this bug to Adobe, just to be ignored. How much stress to do you want on your servers before you WAKE UP.
I have been in 4 meetings over the last 2 weeks and everyone has remarked about the 'experience' trying to view these tutorials.
Wake up to yourself. If you want to charge $500 for FLEX then atleast fix this crappy player.
PS. I note that this player is supposedly built with Flex and that the list control truncates rather than wraps, in addition, no 'tool tips', dates are not localised, the video keeps unpausing itself each time I return from the downloads page, no settings for where files should be cached. Occasionally the underlining (grey) window bar appears over the top of the flash window edge. I've used the application for an hour or so...
Where is the alternative... I'll be glad when Adobe get some real competition.. so that they pay attention to input. A big wastefull site if all support does is read and ignore posts.!!!!!!!!!!!!

Cannot open raw files on CS4 extended even with plug in

Cannot open raw files from canon eos 400d in photoshop Cs4 extended. I have updated camera raw plug in and DNG converter but still no luck! I cannot get the images off the camera onto a file. Help, images of my 5 month old daughter are on the camera from when she was born!

>I cannot get the images off the camera onto a file.
I presume you're on PC (since you don't bother to give that rather critical bit of info). On Windows you'll have to set your camera to be a mass storage device in order to even see the raw files. Best bet is use a card reader as you really shouldn't be trying to transfer image files directly from the camera. It's really slow and as you've found out, it's not "easy" like a card reader.

Audio popping in flv files from Compressor - Help!

I am getting an occasional digital audio pop in the flv videos i am creating in compressor. The audio is coming from digitized Betacam SP master tapes. The audio levels look good and sound fine monitoring the tape, in FCP, and in Quicktime if i export the clip as a Quicktime clip. But when i play back the encoded flv file i hear the offending "pop". The "pops" don't seem to coincide with a peaking audio or video transition. I am stumped! Any solutions would be greatly appreciated.
Will

Aaah, I wish I could help! I have exactly the same problem! I was going to post about it, but since there's this workaround, I didn't want to take up bandwidth with a problem that was not a total showstopper.
Indeed. I have stopped doing what I used to do before. Before, I used to select "All" in compressor - the files generated were the video, the aiff, and the ac3. Well after burning a few coasters through DVDSP 4.1 where there was picture but no sound, I realized that I needed to drag the aiff file to compressor again, and use that - at that point everything is fine. So, right now, my workflow is to export just the video from FCP through compressor, let it encode. Then export the aiff separately and encode it to a3 in compressor, then import the video and ac3 to DVDSP for good results. In short, no more exporting "All" from FCP through compressor, it's a waste of time.
But as to why, I have no idea, and I'm eager to hear what folks have to say! Anyhow, just letting you know you are not alone. Btw. my set up is: FCP 4.5 HD, compressor 2.1 and DVDSP 4.1.0... what's yours?

Cannot Play flv file

Hope I am in the right forum, could not find anything in
Premier Elements forum.
Exported flv file from PE, however cannot play. I double
click on flv file to run it; but it is not associated with any
application.
I have tried all I know and cannot get file to play. Guess I
don't know much ;-(

Hi Jimmie, I'm having the same thing happen to me so sorry
can't help. I recently did a website for my employer, without any
prior knowledge of DW (using CS3) or coding, I just know
Illustrator and some basic Photoshop and Flash (just enough to get
by and he knows this). I used xhtml transitional and a CSS layout
provided with DW. When I validate the page inDW, I get the "embed"
error. I have put the actionscript file in the root of the local
and remote sites. SWF file won't play from the remote site on my
machine in Safari or IE7 but will play from the local site when
hitting F12.
My employer is hosted on Yahoo business and he set up a user
account and password. I "put" the files to his site and they NEVER
show up. I've also tried putting them there with Filezilla (I think
its called) same thing, they never showed up. So, now he's paying
anohter girl who just completed a school course on DW and so I have
let go of the reins on that. So, I paid for a site for myself with
MarbleHost and voila, everything works except the SWF file. Also,
the &(*! Spry navigation bar is a BEAST. Seems to work
sometimes and sometimes not. DW Help seems to suck.
I have searched for hours on many forums and everyone seems
to assume we all know code. lol.
I know this stuff is complicated and there is a learning
curve. I'm a hard worker and don't mind putting in the time - its
this chasing my tail around in circles that I can't stand. Can
anyone point me to a good beginner's book? on coding. I already
have the DWCS3 Bible and its not really very good for me, as I like
step by step tutorials. I also have the DW CS3 missing manual which
is ok, but didn't really go into great depth about the Spry menu
bars (had to google that one and came up with a great chapter from
a book by David Powers at Friends of Ed website.
I'd appreciate it. Sorry if I have an attitude, I'm just
ready to pull my hair out frustrated.

I cannot open a file from LR5 into CC2014 unless it is a smart object. also will not save back to LR at all it gives me an error message "Line: 1 - photoshop.notifyLightroomDocClosed ('lightroom-2.0', 'B53AFA39-A49B-4709-A9BD-0B6467C175C3', 'Macintosh H

I cannot open a file from lightroom into CC2014 unless I open it as a smart object. CC opens, just will not display my image. i am given an error code when I save an image, and can only save to my desktop or other locations, not automatically back into my lightroom.
I am using LR5 latest update, as well as CC2014
Below is the error message:
Line: 1 -> photoshop.notifyLightroomDocClosed ('lightroom-2.0', 'B53AFA39-A49B-4709-A9BD-0B6467C175C3', 'Macintosh HD:Users:BPexposures:Desktop:_DSC5962 as Smart Object-1.psd');

I was also having this issue, and I did some more searching and found this answer in the Adobe forums: Re: Photos from Lightroom 5 to Photoshop CC (2014) and back.... The issue appears to be caused by having not updated Lightroom to the latest version prior to having CC2014 installed (wow that's stupid). The trick seems to be to uninstall Photoshop CC2014 and to then reinstall it after having upgraded to Lightroom 5.5.

Import an FLV file from Adobe Connect into Premiere Elements 12?

The Adobe Connect support staff recommended that we use Adobe Premiere Elements to edit the FLV file that we exported out of their software. We purchased Adobe Premiere Elements 12 based on that advice. Now we see that FLV files are not on the list of supported import files.
How can I import an FLV file from Adobe Connect into Adobe Premiere Elements 12 for editing?

Welcome to the forum.
Over the years, I have used Moyea's Flash Importer plug-in for PrPro, and it has worked perfectly. With about PrPro CS 4, IIRC, Adobe did add an FLV Importer, so Moyea began to suspend development of that plug-in. Then, with the release of the CC version of PrPro, they dropped FLV completely.
Now, Moyea does have other programs, but I do not know if any of them are plug-ins for PrE. However, many of their programs can create, edit and output FLV.
There is also a (free, if memory serves) FLV converter, FLV to AVI, which I used to convert FLV files, before I discovered the Moyea plug-in for my PrPro.
I would look into Moyea, to see if there is anything, that will work as a plug-in to PrE, http://www.video-to-flash.com/products/, and if not, explore a program, such as FLV to AVI: http://www.pazera-software.com/products/flv-to-avi-converter/
Good luck,
Hunt

Cannot download pdf files from internet site with either acrobat pro X or pro XI on windows 8 comput

cannot download pdf files from internet website with either acrobat pro x or proXI on windows 8 computer. windows 7, no problem.

Hi valerieross,
Acrobat can be used to view pdf's or edit pdf's not download them.
Check your browser settings.
If you are referring to viewing pdf's in browser, then please check the following : http://helpx.adobe.com/acrobat/kb/cant-view-pdf-web.html

Cannot Load NEF files from Nikon D600

I am running CS4 but cannot load NEF files from my Nikon D600 _ Camera Raw 5.7 is also installed. Any ideas on how to reslve. I was able to load from my D200 Camera.

Hi. Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Photoshop General Discussion forum.

I cannot play .mov files (from iPhone) in Premiere Elements 10.

I cannot play .mov files (from iPhone) in Premiere Elements 10. Is there a solution?
It used to work fine. I wonder if the problem has something to do with the recent iPhone update. Is there any Premiere update I can download?

Well, if it used to work... and then you updated your iphone and now it does not work... that seems to ME like the iphone update changed something in the files
But, exactly what is inside your mov files?
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/
All Adobe updates start here and select product, read to see if you need to install updates in number order, or if the updates are cumulative for the individual product http://www.adobe.com/downloads/updates/

I have Elements 9 and cannot download NEF files from my new Nikon1 v1, any help appreciated

I have Elements 0 and cannot download NEF files from my new Nikon1 V1, any help is appreciated.

PSE 9 is too old for any of the versions of ACR that support the 1 V1. You have three options:
1. Upgrade to PSE 10 or 11.
2. Use the Nikon software to convert the raw files and send the resulting tiffs to PSE for further editing.
3. Try the free Adobe DNG converter, and you should be able to open the resulting DNGs in your version of ACR.
Windows:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5486
Mac:
http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Macintosh

I cannot encode .flv files from CS4 using AME

Similar Messages

Maybe you are looking for