I cannot export! Error Message: "containing no video"

I am trying to export a 4 Minute video that I've created in final cut pro x and when I click Share > Export Movie from the project library (while being clicked on the timeline) nothing happens.When I try to Share to youtube or FB I get an error message saying that it cannot be exported to either of the two because it "contains no video".The only option from Share that seems to want to work is Email.The video plays great in the timeline and I've checked all 37 clips for the little camera icon as I know some clips may be corrupted but everything looks good.The footage was shot on my Canon t2i,the same camera I shot my last video with that I edited on this same Mac running this same version of final cut.I've considered that maybe the files were imported into final cut and then deleted from my Mac but then they would not be able to be edited in Final Cut,correct? I ahve not been able to find this error message anywhere on line and the problem is not that the share menu is gray'd out like i've read about on many other posts,I dont use compressor either...any help would be great!
[email protected]

finalcutamateur wrote:
Did many of those updates take place in the last 11 months? do I need to do anything in order to keep my project safe so nothing is lost during updating.Thanks for everything.
Read Apple's KB article about best practices for updating: http://support.apple.com/kb/HT5550

Similar Messages

I have re-installed Adobe Reader on to my Windows 7 PC. When I open a PDF I was getting an error message containing . . . .Acrord32.exe application error . . . . I now cannot open any PDF's. Adobe seems to be unresponsive.

I have re-installed Adobe Reader on to my Windows 7 PC. When I open a PDF I was getting an error message containing . . . .Acrord32.exe
I now cannot open any PDF's and Adobe seems unresponsive. I have tried to follow a step by step guide on how to fix this but Adobe won't stay open long enough for me to complete the steps. When I open Adobe it stays open for a matter of seconds then minimises to the task bar and when I click on it again I can't do anything with it and have to close it via task manager
Please help!?

Disabling Protected Mode should fix the problem. But since you cannot even open Adobe Reader by itself, you need to do it via the Windows registry. If you tell me your installed Reader version, I can give you a registry script to do that.

Adobe premiere pro 6 exporting Error Message: winFile.ccp-814]

adobe premiere pro 6 exporting Error Message: winFile.ccp-814]

I'm getting the same error when I try to export a video.
Below I've tried to follow the above provided list of info required for the forum.
I'm using the most current version of Premiere Pro from CC.
I installed all the updates last night before trying to export.
I'm running an updated version of Win8.
The source footage is mostly shot from my 550D/T2i(.mov), and then there are small overlays of an mp4 video I ripped from Youtube. I'm trying to export the video as MPEG2, at 1080i settings. Is this enough info?
[..\..\Src\Win\WinFile.cpp-814] that is the error message I'm getting
When the problem occurs Ijust hit"Okay", which takes me back to the export screen. I hit "export" again, and then it appears to be exporting, but the progress bar stays on 0%.no it hasn't worked before.
Other software? As in simultaneously? Just Chrome browser. Or in conjunction with Premiere Pro; then nothing. It's a standard export from PP without any plugins or standalones contributing to the export.
As stated above, no I have no third party stuff running.
Hardware
Processor: AMD II X6 1055T 2.8GHz
Memory: 16GB
GPU: ATI 5700 1GB
No, I'm not using Mercury Playback engine.
Only with final ouput. My previews are fine.
Hope that's enough info.
Cheers

'Cannot obtain error message from server' when trying to use ODBC

Post Author: Grant C
CA Forum: Data Connectivity and SQL
Hi, I'm developing some reports using Crystal XI on my local PC, using an Oracle 10i back end on a separate server. The SQL for the report is in a method in an oracle package.
When I set the datasource location, selecting 'Oracle Server' then entering the details works fine, and the report runs. However, when I try to use an ODBC connection I get the following error:
Database Connection Error: 'Cannot obtain error message from server.'
The ODBC link is set up as a System DSN, which works fine when I test it. I think I need to use ODBC as some of the reports (which I inherited) seem to fail when run on the Crystal Server, and it seeme to be the ones set up with ODBC which work.
Any thoughts? Thanks.

Hi Mars-
It sounds like your NI-DAQ installation may have become corrupted. I would suggest uninstalling and reinstalling the DAQmx 7.4 driver to correct this problem and ensure that you're up to date. This download is available here: NI-DAQ 7.4
If the problem persists you may want to uninstall and reinstall LabVIEW and then NI-DAQ in that order. The error message will usually give an indication as to which VI the error occurred in. Please let us know which VI is failing if you're unable to avoid the error with these suggestions.
Have a good day-
Tom W
National Instruments

Database Connection Error: Cannot obtain error message from the server

I have a SQL statement that wants to add a temp table to the database.   The SQL statement works fine but when I try to add it via 'Add Command' feature in Crystal XI R2, I get the following error message:
Database Connection Error: Cannot obtain error message from the server
Any ideas?
Thanks in advance,
Zack H.

Hi Raghavendra,
I am using this in the 'Add Command' feature but I get the error message displayed in the subject line:
CREATE TABLE #TibetanYaks(
YakID char(4),
YakName char(20) )
INSERT INTO #TibetanYaks (YakID, YakName)
SELECT LastName, FirstName
FROM      Employee
WHERE      EmployeeID between '2000' and '3000'
I haven't tried to add this as a stored procedure but I imagine it will work as I have no problems yet with stored procedures. I simply want to be able to use temporary tables for the sole purpose of that session and not creating anything static in the database.
By the way, even though I get the error message, when I look on the backend database, I see that the temporary table was successfully created...its just not brought across correctly in Crystal.
Any ideas?
Zack H.

I tried to download a book I bought but failed. The error message contains "The operation couldn't be completed. (Product Integrity error 9918). Anyone can help?

I tried to download a book I bought but failed. The error message contains "The operation couldn't be completed. (Product Integrity error 9918)". Anyone can help?

If this is something you attempted to purchase and download through the iTunes store, then contact iTunes support. http://www.apple.com/emea/support/itunes/contact.html

The Print Carriage Cannot Move error message

I tried to align printer because my printing output as been off center. However, when I try to run the align printer function, the printer stops after a few seconds and a few strange noises, and displays the error: The Printer Carriage Cannot Move. There is normally a sheet of paper jammed in the back carriage, but after I clear it, and try again, the same thing happens. Strangely, I don't have the paper jam issue when I copy or print (i just have an alignment problem). Why do I continue to have paper jam issues when I try to run the align printer function, but not any other functions?For instance, when I ran the clean printer function, the paper and the test came through very smoothly. What gives? please help. thanks!

Hi , Welcome to the HP Forums! I see that you are getting the "Print Carriage Cannot Move error message," with your HP Officejet Pro 8600. I am happy to help! It is possible you may have a permanent hardware malfunction with the printer. In order to determine this, please try the steps within the following guides: A 'Paper Jam' Error Displays on the HP Officejet Pro 8600 Printers.'Carriage Jam' Message Displays. Hope these guides will resolve your issue! “Please click the Thumbs up icon below to thank me for responding.”

Database Connector error: 'cannot obtain error message from server'

I am using Oracle stored procedures and I have used IN parameters for input and INOUT parameter of REF_CURSOR TYPE for returning resultset in Crystal Report 2008 by using package. Now when I am trying to add the package in the Crystal Report, parameter input box prompts, I enter some values and gets Database Connector error: 'cannot obtain error message from server'.
But when I do not use INPUT parameters and use OUT parameter of REF_CURSOR type it runs well without any issues.
We are using ODBC connection for Oracle.
Kindly suggest.

Hello,
Search the Knowledge Base for "oracle store procedures" and you'll find a document on how to write a SP so CR can use them.
Thank you
Don

Canon HF G10 Camcorder - "Cannot Record" error message when trying to make new recordings

Hi All,
I purchased Canon HF G10 camcorder 6 months ago and suddenly I am getting a "Cannot Record" error message each time I press the record button - it simply stopped working and I am puzzled about this - has anyone else faced this problem? if yes, were you able to resolve it? Any insights or torubleshooting guidance will be greatly appreciated.
Best regards,
Rajiv Arora.

ra33,
I am very glad to help you with this.
According to the specifications in the user manual, this model records to the internal memory by default in any shooting mode. You can manually select to record to the SD cards, but only in the Manual or Cinema modes. If you are shooting in Auto, clearing out some of the internal memory should stop the "Cannot Record" message from appearing.
If there is anything else I can help you with, please let me know.
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Apple tv error message "the selected video could not be played. the format was not recognized"

my apple tv has started displaying error message "the selected video could not be played. the format was not recognized" on all my movies. i have never had a problem with it before. please help.

Welcome to the Apple Community.
It seems that your Apple TV may be unable to see your movies, where are your movies kept, have you recently moved them, have you done anything else that might be related.

Export error message and render error message

Hi all,
I just finished a16 min. movie, lots of hours containing two slides shows and a bunch of short video clips, lots of effects, transitions with jpgs, pip's, animated gifs and you name it. It came out great! ON THE COMPUTER THAT IS!... I am running pe7 on a brand new hp elite 410y desktop - AMD Phenom II x6 six-core processor 1045T, 8 GB PC3-10600 DDR3 SDRAM, 3MB L2 cache + 6MB shared L3 cache memory, 1TB seriel ATA hard drive and ATI Radeon HD 5570 graphics with 1GB DDR3 dedicated memory. My operating system is windows 7 home premium edition 64 bit. I used jpg's from three different camera's, downloaded google images, as well as the animated gifs. I took some video from my Nikon coolpix L110 and converted all mov files to avi using the free Prism converter...I didn't think to just use premiere to export to DV AVI. I also took youtube video and converted them to avi. I kept getting adobe system memory low, proceed with caution, did a bunch of saves and got throught it. I tried to render and the error unknown compiling movie message kept coming up. Well, at that point I just broke down, so many hours and then having to show the actual finished product to my friends, the stars of this movie on my little 20" computer monitor and not my big screen tv sucked...so dissapointing but moving on.
I started to search the forums and read another thread that Steve Grisetti answered about changing all photos to no more than 1000x750 and then try to split up the movie and export in premiere to DV AVI. I only had a few photos like that, changed them and I still keep getting the same error message. I tried just taking the first minute, did a save as, named it test and tried to export, no luck. There seems to be something in the first part that premiere does not like and I did notice on playback that some of my effects were not working i.e. video pip sliding in from the left of the screen over a jpg. I am so frustrated.
I finally chopped it up to three parts and tried exporting the 2nd part of just the video clips to DV AVI, no problem but changed my look. When I hit export movie and look at the settings summary Filetype is CompilerMPEGproxy, the Video settings are Compressor: I-Frame only MPEG Frame size 1440h 1080v (1.333) Frame Rate: 29.97 frames/second Pixel Aspect Ration: HD Anamorphic 1080 (1.333) Fields: Upper field first, Audio Settings are Compressor: uncompressed Sample rates: 48000 sample/second Channels: Stereo and Sample Rates: 16 bit. If I change to DV AVI, then the whole look changes, probably because the frame size is only 720h 480v. Is there a way to export to DV AVI and keep the larger frame size?
I wanted to keep the original size, so I just tried to render part 2 and part 3 as is and had no problem, but now the audio skips. I have a wav file on part 3 and part 2 has the converted avi audio that came with the clips. Please help, any suggestions will be most appreciated. I can't start all over...I'm burnt.
debby

Hi Steve,
Thank you for your promptness...I am still a little confused though, I made a copy of my final movie and was working off the copy to try all these different scenerios to get it to render and now have alot of different projects, same movie, different project names. Should I delete all the copies and take my original and go to Edit/Preferences/Media Cache and clear the media cache. Then the timeline menu and delete render files and then go to the FAQ's to troubleshoot.
A quick second question: I did get to render two parts of the whole movie, but the audio is skipping. Can that be fixed and can I use it?
Thank you,
debby

IMovie 08 Export Error Message

I am trying to export from iMovie 08 without any success. I repeatedly get the same error message, but cannot find any reference to the error number anywhere. The error code is -2000. Here is the process that gets me there.
Import video from Canon Vixia HF m31 AVCHD camcorder to iMovie 08. Video was shot as PF30 (wrapped in 60i in-camera). Imported as "FULL". Trimmed a few seconds from the beginning and end. Share to "Export using Quicktime". Settings in Quicktime:
Compression: h.264
Frame Rate: Current
Key Frame: 24
Frame Reordering: YES
Compressor Quality: High
Encoding: Best (Multi-Pass)
Data Rate: Automatic
Size: 1280x720HD
Prepare for Internet Streaming: Fast Start
Am I doing anything wrong with any of these settings? The movie does start to encode, but about 1/2 way thru I get the error message. Does anyone have any idea what that error code means?
My export destination is Internet streaming, preferably at 720p for nice full-screen viewing.
Other tools I already have: iMovie HD, JES Deinterlacer, MPEG Streamclip, Quicktime 7.6.6
Thanks in advance for any help you can offer.
Message was edited by: acfpt

Ok, I came back to document the solution in case anyone else ever has the problem.
After 2 hours on the phone with Apple, it was determined that my Home>Movies folder was corrupted. Prior to that, we deleted preferences, caches, tried encoding the movie under a separate account on the same computer (worked fine there!), and a bunch of other things. It finally worked after we shut down iMovie, renamed the Home>Movies folder to Movies.old, reopened iMovie which created a new Movies folder, re-imported the footage, created a new project, and then exported.
Hope that helps someone else.
Thanks for the response, Appleman.

Error message when importing video

Hi,
I receive the following error message when trying to import .flv file in Captivate 6:
I tried restarting the project several times, as well as creating new flash file, with no luck. This is only a 3-slide project with the video embedded on a slide, and will publish as SCORM.

Hi all Thanks for the rapid response. However I have sort of found the problem but not the solution. I tried loading direct from the card but that failed in the same way. So I had a think what had changed and it was only one thing. It has always worked before because I was using my XP desktop machine. I am now using a W7 laptop. So I went back to XP and hey presto, it worked. SO what does that mean? Any ideas?? Only obvious difference is the OS. In answer to why I am loading from Photoshop. I have loaded 150 video clips from the card from a compact camera.( Been on safari!) I am using PS to sort and tag for various things, then send one group to PE . I ended up that route because they loaded into PS and not PE. So in summary:- I cannot load either directly from card or via PS, video clips into PE on W7, but I can on XP. I can load same into PS and view OK in PS on W7. In case you need further info, but I suspect its a windows issue? OS=W7, PE V7, PSV7, On the W7 PC it says... BIT rate=705kps!,Sample Rate=44khz,Channel count =1 Says image is avi but I thought it was mpeg Nothing else running Its a big fast empty machine, you could have the numbers if you really want but I don't think its relevant Sorry its abit long . Thanks Chris

Cannot export a self contained Qucktime movie

As of yesterday I have lost the ability to export a self contained Quicktime move from FCE. The sequence is complete and rendered and I have exported as recently as last month but now it simply makes what's known as a reference movie with the suffix .mov
The Export drop down menu still displays all the Quicktime options.
Additionally the Quicktime icon in my dock when clicked displays a question mark. I tried downloading Quicktime but still no go.
Please help Tom

Right but what I am trying to convey is that I need to generate the brushed chrome framed, high quality, up-loadable, stand alone video that I used to get with ease and I cannot get that with my FCE. What are you calling it, what is the proper term because I always called them Quicktime. I made one less than 2 months a go.
Quicktime is present in my System Prefs but is not in the dock. When it was a question mark appeared over it. I cannot find it, launch it, etc.

Unable to Export Error Message

I get the following error message when trying to export a file from LR 4.1 using Windows 7:
Unable to Export:
An internal error has occurred: Win32 API error 2 ("The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute
Has anyone else had a similar problem?

Yes, many people, especially when first using Export in LR4. The problem is likely caused by the Post-Processing/After Export: field being incorrectly left blank (by LR, not by the user). Simply put a valid action in that box, e.g. "Do Nothing" is fine, and the problem should go away.

I cannot export! Error Message: "containing no video"

Similar Messages

Maybe you are looking for