I cannot find a profile for Nikon AF-S DX NIKKOR 18-55mm f/3.5-5.6G VR

Hi, I have tried to download a profile for my D3100 kit lens - Nikon AF-S DX NIKKOR 18-55mm f/3.5-5.6G VR but cannot find it in the Adobe Lens Profile downloader.
  Adobe says that it is supported (two years ago: see it at this link from October 2010    http://blogs.adobe.com/lightroomjournal/2010/10  )
Since it is listed many places as being supported, it is frustrating that I cannot find it in the Adobe Lens Profile downloader.
Am I doing something wrong? Or can I download that profile without using the downloader.  Can I use the lens profile that is shown with a different camera.  I see similar lenses under D300 and D90 in the folder with about forty NIKON lens profiles (but only two for the D3100). However, under Lens Correction when I tick Nikon as model then I only see about seven lenses in the drop down list.  How can I see the full contents of the folder?
Any help would be appreciated.
Thanks
PS.  I was going to ask where the profiles are stored but luckily I have found them after a search.

I too would like to see this lens profile added to the list in Lightroom, in addition to the Nikon DX AF-S DX NIKKOR 55-300mm f/4.5-5.6G ED VR. I've found a similar version of the 18-55mm under the D40, but not for the D3200, and I haven't been able to find any profile matching the 55-300; only 55-200.

Similar Messages

  • Where to find color profile for Nikon D80? Then how do I apply it?

    I've tried googling and found a few places that claim to have ICC profiles for my Nikon D80. I've seen people say, "oh use program X or Y to apply it" but I want to do everything in Photoshop (CS6, on my Mac running Yosemite). Can someone point me at a place to find an ICC profile so I can get my Nikon NEF raw images into CS6?
    Can you further tell me how to install the profile? I've tried all three locations described at Introduction to Icc Profiles and I've rebooted many times. No luck! The ICC files I've got look find but maybe they aren't?

    Lightroom doesn’t use ICC profiles, it uses .dcp files, DNG Color Profiles.  The profiles come with Photoshop and updates to the Adobe Camera Raw (ACR) plug-in.
    If you really mean the D80, then that has been supported since PS-CS2/ACR 3.4.
    If D80 is a typo and you meant D800, then that has been supported since PS-CS5/ACR6.7.
    If D80 is a typo and you meant D810, then that has been supported since PS-CS6-or-CC/ACR 8.6.
    Do About Plug-ins / Camera Raw and see what precise version you have, and verify which camera model you have.

  • Profiles for Nikon manual focus lenses

    I can't seem to find any profile for Nikon manual focus lenses.  Are those impossible to make with the profile creator?

    Here are some of the ones:
    400/f3.5 Ais
    35/f2 Ais
    50/f1.4 Ais
    85/f1.4
    85/f2
    75-150/f3.5
    50-135/f3.5
    I think the zooms would be difficult unless you record what focal length your pictures were taken at.

  • LR lens profile for Nikon P7000?

    I cannot find a profile in LR 3.3 for the Nikon P7000.  The P6000 comes up, but no P7000.  3.3 supports the NRW files from the P7000.  Can anyone give me a hand?
    Thanks very much . .
    Jack

    Your computer has the same operating system as mine so there shouldn't be an issue with file paths being different for that reason.
    You should only see the P7000 lens profile when you edit RAW/NRW files, not JPGs.  Please confirm that when editing an NRW from a P7000 you cannot locate a "NIKON COOLPIX P7000" profile in the list (at the bottom of about 50 Nikon profiles) when Nikon is selected as the "Make".  Also confirm you do see a screen-full of profiles, not just one or two.  Do this in LR 3.4 RC.
    Please locate the P6000 lens-profile (.lcp) files that you can see in the list on your hard drive using Windows Explorer and the paths given, earlier.  If you can't find them, please be specific about what part of the path does not work or what part of the process doesn't work.  If you don't understand some part of these instructions for locating the lens-profile files, say what part.  Saying you cannot find them is not enough information.  By locating the Nikon lens profiles we can verify if the file are missing or if something else is wrong.  I would also like to see the dates of the profile files to understand how long ago they were installed.
    You should be using the start-menu/start-button and opening Computer (or My Computer), then copy-pasting each path, in turn, to the address area and hitting Enter or perhaps click on the right-arrow at the right end of the address area.  If copy-pasting the full path in the address area doesn't work, try part of it and add the foldernames one-by-one until you can't get to part of it and say what part that is.

  • Need profile for Nikon D5000

    I have a Nikon D5000.  I need the profile for both the zoom-normal and zoom telephoto lenses for use in the lens correction filter.  Where can I find them.  The camera does not appear in the drop down menu within the filter.

    I use windows 7 pro 64bit.
    The lenses are:
    DX 18-55
    DX 55-200
    CAmera is Nikon d5000
    I use Photoshop CC.
    Date: Wed, 30 Apr 2014 12:02:39 -0700
    From: [email protected]
    To: [email protected]
    Subject: Need profile for Nikon D5000
        Re: Need profile for Nikon D5000
        created by R_Kelly in Photoshop for Beginners - View the full discussion
    Hi,
    What version of photoshop and operating system are you using?
    Which lenses are they?
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6345077#6345077
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6345077#6345077
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6345077#6345077. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Photoshop for Beginners at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Cannot find an overload for "PeopleManager" and the argument count: "1".

    Every time getting following error
    Cannot find an overload for “PeopleManager” and the argument count: “1”.
    at following line
    $people = New-Object Microsoft.SharePoint.Client.UserProfiles.PeopleManager($context)
    I am referring userprofile dll from 16 hive...

    Hi,
    Can you provide the complete script in use for a further research? It would make others easier to find out the root cause of this issue.
    Here is a working demo which works in my environment, you can take it for a try:
    #Specify tenant admin and URL
    $User = "[email protected]"
    #Configure Site URL and User
    $SiteURL = "https://tenant.sharepoint.com/sites/mysite"
    #Add references to SharePoint client assemblies and authenticate to Office 365 site - required for CSOM
    Add-Type -Path "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\16\ISAPI\Microsoft.SharePoint.Client.dll"
    Add-Type -Path "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\16\ISAPI\Microsoft.SharePoint.Client.Runtime.dll"
    Add-Type -Path "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\16\ISAPI\Microsoft.SharePoint.Client.UserProfiles.dll"
    $Password = Read-Host -Prompt "Please enter your password" -AsSecureString
    $Creds = New-Object Microsoft.SharePoint.Client.SharePointOnlineCredentials($User,$Password)
    #Bind to Site Collection
    $Context = New-Object Microsoft.SharePoint.Client.ClientContext($SiteURL)
    $Context.Credentials = $Creds
    #Identify users in the Site Collection
    $Users = $Context.Web.SiteUsers
    $Context.Load($Users)
    $Context.ExecuteQuery()
    #Create People Manager object to retrieve profile data
    $PeopleManager = New-Object Microsoft.SharePoint.Client.UserProfiles.PeopleManager($Context)
    Foreach ($User in $Users)
    $UserProfile = $PeopleManager.GetPropertiesFor($User.LoginName)
    $Context.Load($UserProfile)
    $Context.ExecuteQuery()
    If ($UserProfile.Email -ne $null)
    Write-Host "User:" $User.LoginName -ForegroundColor Green
    $UserProfile.UserProfileProperties
    Write-Host ""
    Thanks 
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Safari and firefox 'cannot find the server' for every other page that i navigate to, unless I turn Wifi off and on. How do I fix this?

    Safari and firefox 'cannot find the server' for every other page that i navigate to, unless I turn Wifi off and on. Once i reconnect to the network, the page loads, but after loading a few more pages, the same thing happens all over again.
    This happens each and every time, on different Wifi networks, in different locations.  On the other hand, I don't ever encounter this problem when I tether my laptop to my mobile phone's 3g/2g network using Personal Hotspot. How do I fix this?

    Try this DNS server ...
    Open System Preferences > Network > Advanced > DNS
    Click + and type:
    208.67.222.222
    Click + again and do the same.
    208.67.220.220
    Click OK.
    Quit and relaunch both your browsers to test.
    If that doesn't help, try here >  iOS: Troubleshooting Wi-Fi networks and connections
    And here >  Wi-Fi: How to troubleshoot Wi-Fi connectivity

  • I cannot find the icon for office:mac 08 word on my doc, where did it go?

    I cannot find the icon for Office: mac 08 word on my doc. I downloaded the whole Office: mac 2008 Home & Student Edition about a year ago and just recently the word icon disappeared. The other Office icons are still visible and i am able to use them but i cannot find the word application anywhere.

    Have you used spotlight search? Typed "word" and the application doesn't appear? If it doesn't then it probably isn't around anymore.... so hit command + space ... and type "word"... what happens?

  • Cannot find PDL type for output device LOCL in J1INCRT

    Dear all
    I am getting error in PRD system. When I am running J1INCRT (Customizing for Certificate Printing)  the error
    cannot find PDL type for output device LOCL
    we are using ECC6 ,oracle 10g  and windows 2003
    Kernel release    701
    Please suggest how to solve 
    Regards,
    Kumar

    Hello
    It looks like that you had not installed the ADS(Adobe Document server) for the PDF type reports. Please check with your basis team if you want to configure ADS.
    If you need the output as a sapscript then please do the sollowing steps:
    (1) Execute transaction SM30
    (2) Enter 'Table/View' as V_T5F99OCFT
    (3) Select 'Maintain' option.
    (4) Select 'New Entries' option from the Application Too
    (5) Enter following entries:
         Logical Form Name    = HR_IN_EPF12A_99M
         Form Variant         = (Leave this field blank)
         End Date             = 31.12.9999
         Start Date           = 01.01.1990
         Form Type            = SAP Script (SSC)
         Def. Type            = (This field should be checke
         PDF Form Name        = HR_IN_EPF12A_99M
         SAP Script Form Name = HR_IN_EPF12A_99M
         Smart Form Name      = (Leave this field blank)
    (6) Save the entries
    The above example I have given you is only for the form 12A.
    You have to make entries for all the reports sapscript in this table.
    Please goto SE71 -> F4 -> Payroll -> Payroll India here you will find
    all the sapscripts you require.
    Regards
    Ramana

  • I cannot find my receipt for my ipod how can i prove it isnt a year old

    I cannot find my receipt for my ipod and its under a year old how can i prove this

    Hi cantfindanything,
    I am gathering you are trying to get an iPod repaired by Apple.
    In the US for iPod Touch Generation 5:
    Every iPod comes with a one-year limited warranty and 90 days of complimentary telephone technical support.
    If you are trying to get a replacement or repair job, Apple will just need your Serial Number, found on either the back of your iPod Touch or in: Settings, General, About, Serial Number.
    When Apple receives this number, their database will be able to show up your information including device purchase and activation.
    To get a repair job/replacement, it is best to talk to Apple on the phone or go to your nearest Apple store to find out possible resolutions.
    To contact Apple call:
    1-800-MY-APPLE
    You can also take the iPod into your closest Apple Store and give them your serial number and they will be able to help you: http://www.apple.com/retail/storelist/
    Many Thanks for your question and Happy New Year!
    iBenjamin Crowley

  • Satellite L500-1XD - cannot find an update for PC health monitor

    This TBS advises updates to PC health monitor and HDD/SDD alert.
    HDD/SDD alert has a published update in the relevant downloads section but I cannot find an update for PC health monitor.
    Any one got any bright ideas ?
    Otherwise this seems quite a balanced system.

    Hi Paolo30,
    Thanks for your contribution. I agree with your model designation
    I would like to download ver 1.5.6.0 but it does not seem to be listed on the download list (Two and a quarter pages long) for the L500-1XD on the Toshiba-Europe website. I am using I.E.8
    Where are you seeing this listed ? Could you give me a URL please ?
    It is an important update as it resolves a conflict between video streaming from HD and SMART HD messages as described in the TSB.
    The only upgrade that is tagged as 1.5.6.0 is the Bullitin Board and this does not sound like the correct type of application. There was obviously a major update on 21/6/2010 there are 30 odd updates with that date.
    Kindest Regards

  • Cannot find a report for SQL Server monitoring

    We installed a SCOM 2012 environment recently and imported the SQL Server Management packs successfully. SQL Servers are being monitored. 
    However, in the reporting section, i cannot find a group for SQL Server Reporting. All other show up ( Active Directory, Appication Monitoring, Web monitoring, etc) Just none for the SQL Reporting.
    Please help

    Hi,
    I assume that you miss some SQL management packs, would you please re-download the management pack here and import it:
    https://www.microsoft.com/en-hk/download/details.aspx?id=10631
    After successful importing, you should see it under reporting workspace:
    If you still cannot see it, please check operation manager event logs for more information to help to troubleshoot this issue.
    Regards,
    Yan Li
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Cannot find PDL type for output device '(Printer name)'

    Hi,
    After seeing the statutory reports (PF, ESI etc) in standard format, we try to print form. We get the below error:
    Cannot find PDL type for output device '(Printer name)'
    Message no. FPRUNX113
    Diagnosis
    No PDL type has been found for the specified output device.
    System Response
    Error message
    Procedure
    Contact your system administrator.
    Procedure for System Administration
    For more information, see SAP Note 685571.
    Any input will be off great help...
    Regards
    Pooja

    Hello
    It looks like that you had not installed the ADS(Adobe Document server) for the PDF type reports. Please check with your basis team if you want to configure ADS.
    If you need the output as a sapscript then please do the sollowing steps:
    (1) Execute transaction SM30
    (2) Enter 'Table/View' as V_T5F99OCFT
    (3) Select 'Maintain' option.
    (4) Select 'New Entries' option from the Application Too
    (5) Enter following entries:
         Logical Form Name    = HR_IN_EPF12A_99M
         Form Variant         = (Leave this field blank)
         End Date             = 31.12.9999
         Start Date           = 01.01.1990
         Form Type            = SAP Script (SSC)
         Def. Type            = (This field should be checke
         PDF Form Name        = HR_IN_EPF12A_99M
         SAP Script Form Name = HR_IN_EPF12A_99M
         Smart Form Name      = (Leave this field blank)
    (6) Save the entries
    The above example I have given you is only for the form 12A.
    You have to make entries for all the reports sapscript in this table.
    Please goto SE71 -> F4 -> Payroll -> Payroll India here you will find
    all the sapscripts you require.
    Regards
    Ramana

  • I need the lens profile for nikon 28 - 70

    By the way who the heck wants to chat with some guy in a foreign that is no help ? The is your adobe chat help LOL
    I need the lens profile for nikon 28 - 70 where to down load ????

    Download and install Adobe Lens Profile Downloader.
    With this program you can download a lens profile for 28-70mm f/2.8 for DX or FX format, raw only. Also available 28-70mm f/3.5-4.5 for DX, raw only.

  • Cannot find the classfile for javax.mail.internet.AddressException

    Hi,
    Scenario is SAPCRM 7.0/ECC.
    We are trying to extend the EmailAction class.
    The error bieng faced is
    Cannot find the classfile for javax.mail.internet.AddressException.
    We have added crm/isa/lwc to the used Dcs but still this error is there.
    Mail.jar is also present in the system.
    We are not able to make out what exactly the issue is.
    Please help.
    Thanks,
    Rohit

    Hi Rohit,
    Did you ever find the solution to this problem?  We're encountering the same error message.
    Thanks!
    Joe

Maybe you are looking for