I cannot find images for contact sheet printing.

I have been printing hundreds of contact sheets and from time to time when I add pictures for contact sheet, I am unable to find the images I want even though they are open and in the project bin and in the same folder.  I may find two but not the other two and so on.  They all are the same size.  Thanks.

You need to go into more detail about your problem. Perhaps you can provide screenshots of your dilemma with the software and provide more information that may help people answer your question. If not, you can always try reading the manual.

Similar Messages

  • Print Sharpening for contact sheets?

    When I am printing multiple images if I use the single image printing options I can set sharpening parameters in the print dialog. However if I switch to contact sheet printing, to get more than one image on a printed page, I lose the sharpening settings. Is it really impossible to do print sharpening when printing multiple images on a page or am I missing something?
    -Will Rabinovich

    A contact sheet doesn't have to be thumbnail size. I often print 2 5x7 s on one 81/2 x11 sheet of paper. The only way to do that in Aperture is with contact sheets or a light table, neither of which seems to have print sharpening
    -Will

  • Contact Sheet Printing

    Why are my contact sheet printing darker than my normal print files? I am in CS4 on am Mac OS X.
    Any and all Help appreciated.

    What are your Edit > Color Settings?
    What are the color spaces of the images themselves and of the contact sheet files?
    Do you use the same print settings for the individual files and the contact sheets?

  • Black Background for Contact Sheets

    Feature Request:
    The ability to customize background color for contact sheets, particularly black. At this point it looks as if all we have is a white background.
    If there is a way, please tell...
    Thank you!
    Linda

    Hi Ian,
    This is not about the interface but about printing the contact sheet.
    There are photographers who would like to be able to make the backgrounds on their contact sheets print black ink.
    I am actually making this request on behalf of another local photographer who attended our last Guild meeting. He searched high and low to see if it could be done but had no luck. I too searched for a way but couldn't find it. I think it is a worthwhile request since many of us might like to present comps with black rather than white paper showing.
    Linda

  • HELP! Different colors in Single print vs Contact Sheet print

    Aperture 1.5.1, G5, 10.4.8, Apple 30" display, Kodak 1400 Dye Sub printer, Canon 350D, shooting RAW.
    I have a few pictures and I want to print them. They are baby pictures so picture a little baby in standard issue baby yellow tee shirt and wrapped in baby yellow blanket.
    I select four pix and go to print images. In Single Images I set it up as Kodak 1400, Color sync profile Kodak 1400 Glossy, no color correction and changes in printer settings. I then do a preview and the images are prepared and displayed in Preview and they look fine.
    With the same four images, in Contact Sheet I set it up as Kodak 1400, Color sync profile Kodak 1400 Glossy, no color correction and changes in printer settings. I then do a preview and the images are prepared and displayed in Preview and they look like ****. Baby's yellow cloths are blown out to almost white. The off white wall behind mother and baby is blue.
    I've tried several setups and tweaks and I always get the same result. One print on a page looks great, contact sheets look like ****. It's like the contact sheet setup is using completely different color settings than the single sheet setup.
    Unfortunately you can't morph a working single sheet into a contact sheet. They have to start from different places (create new single vs create new contact)
    HAs this already been discussed and fixed? hopefully?

    HAs this already been discussed and fixed? hopefully?
    It appears to be a bug.
    http://discussions.apple.com/message.jspa?messageID=3553568&tstart=0

  • How do I include metadata information (aperture, shutter speed, ISO and white balance) to each image on contact sheet?

    How do I include metadata information (aperture, shutter speed, ISO and white balance) to each image on contact sheet?

    Just to expand JimHess reply. This are all the EXIF data you can include on a print. As far as I know, WB is not written to any standard EXIF fields.

  • Image autoflow -contact sheet

    Hi all hope you can help I am looking for something like the contact sheet on indesign. I need something that lays out my images on a sized set page that keeps the proportions of the images.
    Contact sheet from bridge is good only it resizes my pics to fill the page. Is there some sort of plugin or addon that I can get for indesign that will layout the images automatically filling your page for best fit?
    Ages ago at an old workplace they had the exact thing that I am after. I think it was called Auto flow or something like that.
    Please let me know if you can.
    Thanks

    There are numerous scripts that can do this, I believe some are installed with ID itself, though you may have to look on your drive or install disks for them. I also sell "ID Image Catalog" which will do the same and has a UI for all your options.

  • What does it mean if the system "cannot find driver for console framebuffer"?

    I've just installed Solaris 7 on a SparcStation 20 with 256 MB RAM, 1 + 2 GB hard drives, 1xSuperSparcII. When I boot up it says "NOTICE:Cannot find driver for console framebuffer". I can't run the CDE, and I assume this is because there is no graphics driver. The graphics card (it's an add-on but by Sun) presumably needs a driver and I would have thought that this would have been included with the Solaris 7 CD. The whole thing worked fine when it was running Solaris 2.5.1 and now I've installed a new OS (initial as opposed to upgrade) it just don't work. Any ideas?

    The "output-device" parameter may not be set properly in Open Boot Prom(OBP) and hence during installation, the driver may not be installed. To fix this, try the following steps.
    1. Note down the current value for output-device. This value is to be restored later.
    printenv output-device
    2. Set the "output-device" parameter to "screen" in OBP
    setenv output-device screen
    3. Perform a reconfiguration boot using the command "boot -r"
    4. The error will not appear. Verify that /dev/fb refers to a device link.
    5. Go to ok prompt again and restore the output-device to its original value (as noted in step 1). The reason for doing this is that some resolution parameters would have been set earlier for your output-device.
    6. Reboot the system again. The error may appear again but since the device link is already created, the CDE will work.
    Please contact us if there are any issues.
    Thanks
    Srinivasan

  • Concurrent Manager cannot find information for your conc req in FND_USER

    Dear All,
    Our customer is facing this issue while submitting conc requests. The requests end up in a Error with the following message in the Diagnostics.
    Concurrent Manager cannot find information for your concurrent request from FND_USER
    Cause: Concurrent Manager found no rows while selecting information for your concurrent request from FND_USER .
    Sometimes it does not happen. It happens only for HRMS users. We are not sure what is causing this issue.
    Anyone has faced this already? Highly appreciate your suggestions / pointers towards solving this issue.
    Thanks in advance!
    Hem

    Hem,
    Not sure if this is relevant here, but you may try to submit the following concurrent programs and see if it helps.
    - "Sync responsibility role data into the WF table."
    - "Synchronize WF LOCAL tables"
    - "Workflow Directory Services User/Role Validation"
    If the above does not help, enable trace/debug on any of those concurrent programs, and submit it again, check the concurrent request log file contents then (you do not have to generate TKPROF file, so skip this step).
    Note: 453527.1 - How To Trace a Concurrent Request And Generate TKPROF File
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=453527.1
    Regards,
    Hussein

  • F.01 TCODE for balnce sheet printing

    Hi
    We are using F.01 transaction for balance sheet printing.
    We are facing problem in printing previous year values ( 2006 )
    How to upload these values.
    PLS. explain the flow.
    In the sapscript the values which are used for printing are ERP18,ECP18 etc.
    But in the program driver program RFBILA00 such variables are not used.
    PLs. help it is urgent
    Harshada

    The specified item was not found.

  • Outlook cannot find file for icloud

    Updated to latest version of itunes and cannot access files for contacts and calendar on my Windows 8 machine. Iphone and Ipad are OK.

    Updated to latest version of itunes and cannot access files for contacts and calendar on my Windows 8 machine. Iphone and Ipad are OK.

  • I want to re-install Premiere Elelments 8, but cannot find downloads for version 8.  Where can I download the files for version 8?

    I want to re-install Premiere Elelments 8, but cannot find downloads for version 8.  I have the serial no.  Where can I download the files for version 8?

    Hi Jeff.  I did purchase Premiere Elements 8 from Adobe (download version), but couldn't find the files to download again on the adobe.com website.  I did, however carry out another search of files from my old PC and eventually found the files to reinstall on my new PC, using my registered product serial no.  Installation has worked.  It seems that Adobe has stopped supporting version 8 as I could only find version 9 and later for download from the adobe.com website.
    Thanks for your prompt reply

  • IDM with SQL server Error: Cannot find columns for the table...

    Hi all,
    I am Configuring IDM with SQL Server repository and ran into this error.
    'Cannot find columns for the table 'object'
    .....jdbc...[SQL Server]Invalid object name 'object'
    Can anybody please help me!!
    G

    Yes, permissions are very important. I ran into a similar problem because I didn't have the correct permissions. Make sure the user has the following permissions:
    CREATE ANY TABLE
    ALTER ANY TABLE
    DROP ANY TABLE
    CREATE ANY PROCEDURE
    EXECUTE ANY PROCEDURE
    DROP ANY PROCEDURE
    Also, make sure there is enough space in the default tablespace of that user.
    HTH
    ~Suvesh

  • Cannot find InfoProvider for selection specified

    Hi All,
    When executed RSPLAN in BI System , it took us to EP screen , in that
    InfoProvider , Aggregation Levels , Filter....etc tabs are there.
    When selected InfoProvider , Z* or * or empty and when clicked on start button..
    The following message is displayed :
    Cannot find InfoProvider for selection specified "with green exclamatory symbol"
    Even it is not giving JCo type of error message ,
    Real time infocubes are created and activated .
    The two above things have been checked properly .
    Thanks,
    Srini

    Dear Srinivasa,
    Check this link..
    Cannot find aggregation levels for selection specified
    not able to see infoprovider in the planning modeler
    Hope this helps u..
    Best Regards,
    VVenkat...

  • I cannot find "scan for instrument​" at MAX

    Hi~
    I connected GPIB-USB-HS cable between the laptop and Keithley 2602 device.
    In MAX, I could find GPIB-USB-HS "USB0::0x3923::0x709B::016F05B4::RAW" under "device&interface"
    However, I cannot find "scan for instrument" anywhere!
    So, I coudn't connect equipment with laptop......
    What is the problem??
    (I use Window 7, and I installed NI driver.)

    duplicate post

Maybe you are looking for