I cannot find my external hard drive

First let me start by saying I am no geek!
I have a G technology hard drive and when I plug it to my new MacBook Pro it is nowhere to be seen.
This summer
i had to change my MacBook Pro. I transfered all my files to an external Hard drive and then put back some stuff in new Mac. All went well and had no problems doing so.
Today plugged in the External HD and I cannot see it!!!
Can someone help?

In order to share out an external USB HDD attached to an AirPort Extreme, that HDD must be formatted in either HFS+ or FAT32. It will not work if the drive if formatted in either NTFS or ExFAT.
If it is formatted in one of the acceptable methods, have you tried mapping the drive instead of just looking for it in Windows Explorer? The proper mapping syntax would be: \\<AirPort Base Station Name>\<AirPort Disk Name>

Similar Messages

Since I downloaded Maverick, I cannot find my External Hard Drive in the "Finder" area. I have to unplug all the time the hard drive to be recognized by my iMac. How can I fix this problem? Thank You.

Since I downloaded Maverick, I cannot find my External Hard Drive in the "Finder" area. I have to unplug all the time the hard drive to be recognized by my iMac. How can I fix this problem? Thank You.

Check Finderr->Preferences->General and ensure that HDs are selected for display. If so and they still don't, Reset the NVRAM/PRAM and Reset the SMC, and see if that does the trick.

Time Machine: Cannot find backup (external hard drive)

Hello and thank you in advance for your help.
I have a MacBook Pro and am running OS 10.6.8 (Snow Leopard). I use TM to back up to a 500 GB LaCIe external hard drive, which has worked fine for over a year of ~monthly back-ups. The back-up porcess typically takes some time, but less than an hour or so. While backing up this week, it just halted....and was still backing up 24 hours later. I quit the back-up, dismounted and remounted the LaCie, tried again, but it still got stuck in the backup process overnight. After searching the forums, I used the disk utility to re-partition the LaCie to ensure it had only one partition. When I re-started TIme Machine, I got the message "Your Time Machine backup disk can't be found." It shows up in finder, but when I tried to find it in the TM Preferences, it's not there, so I cannot select it. I dismounted the LaCie, rebooted, and remounted the LaCie, but that didn't fix anything. Help, please?

Part 1 of my problem is fixed. I decided to run the disk repair and then re-do the partiton process, but this time, I kept the default name assigned to the partition by disk utility ("Untilted-1"). Now TM sees it, and is backing up. Part 2 remains to be seen. I expect it will take 24+ hours anyway, BC I reformatted the LaCie, and this is essentailly the first backup on a re-formatted hard drive.

Cannot find Maxtor external hard drive in Disk Utilities

I have an external One Touch Maxtor external hard drive that I connected via ethernet to my iMac. I want to reformat the drive using the Apple format but Disk Utility cannot find it. When I go to the Finder, I can see the drive, access, and copy to and from the drive, but it doesn't show up in Disk Utility? I don't have a firewire cable to hook up the drive that way, anyone have any suggestions?

I would appreciate if anyone can help me with this

I can not find my external hard drive...

The time machine is not working. How do I find my external hard drive and find my backup files? Perhaps this has to do with the fact that I lost power the other day and my router is not working... A different question.. Is this related?

The external hard drive does not work any longer
Do you mean the Time Capsule? If you are having problems with your Linksys router as you indicate, the Time Capsule will likely not function correctly until the Linksys is working normally.
I am getting into the default setting of linsys.
I think you may mean Linksys. If this device is your main router, everything on the network receives connection information from the Linksys, so this device must be functioning correctly in order for any other devices on the network to work correctly.
I can not get the website to open the 192????????
I'm guessing that you are talking about the Linksys router here, correct? You may need to contact Linksys support as our ability to help on that product is going to be limited to a user who understands Linksys products and happens to see this post.
I think we can help on the Time Capsule. Please post back when you have the Linksys router working correctly and we will work on getting the Time Capsule up and running again on the network.
Besides, I tried to log into this website for forever, it wouldn't let me.
I check the Community Support area mutliple times each day and cannot recall any problems with accessing this area in the recent past. We have not seen any other similar compaints from other users, as would normally be the case if there were a general problem with this site.

I can't find my external hard drive in FCPX

I can't find my external hard drive where I have all my old events and projects. In Finder it shows but not in the latest version of FCPX. I am full updated with FCP and Mavericks
Any Ideas?

Please check this out:
http://support.apple.com/kb/HT5958
http://fcpx.tv
Take your time and read the above. FCP X will create a new Library comtaining your Projects & Events, but read the above first.
File/Update Projects & Events/Locate

I cannot connect my external hard drives (1 WD My Passport and 1 LaCie Porsche Design). The drives were connected and worked perfect, the WD is used as a Time Capsule, the LaCie is formatted as exFAT and used for miscellaneous. They are both USB 3.0

I cannot connect my external hard drives any longer. I have one WD "My Passport" used as a Time Capsule and one LaCie Porsche Design used for all different kind of data, formatted in exFAT. They worked fine, connected direct or through an additional USB hub or also attached to a Dell monitor. The Lacie helds my iTunes Library and the iPhoto library.
After I moved the iTunes library to the external drive, from time to time the drive went into a never ending loop and I had to shut down the laptop (MacBook Air).
The last time starting again the drives were not recognized any longer. I tried to connect them to another MacBook, which didn't work.
Starting with Windows 7, the WD is also not recognized at all (perhaps because of time capsule format?) and the LaCie gives an error.
Could anybody tell me if there is a chance to get them alive again? When I connect them now, they start to heat up quite fast without anything else happening.
Thanks

Hi,
Just want to clarify, have you checked to make sure the cords are not damaged (going from hard drive to computer and or any power source )?
You have also check to make sure that usb ports are working correctly?
If you have checked these things it may be that the external drives have failed.
I would google the error message from the LaCie drive before I do anything.
There are several ways that I know of, one is to put the hard drive in the freezer for a while (make sure you wrap it air tight) if this works it is not a permenint fix. You might be able to transfer information to another source.
The other method is to plug the hard drive into a hard drive connector a product like this:
http://www.newegg.com/Product/Product.aspx?Item=N82E16817707192
to do this you would have to remove the hard drive from its enclosure and still this is not a guarantee it will work.
The finally way I know is using a recovery service. This can be rather expensive, and there are no guarantees

Why can't I find my external hard drive on Airport Extreme?

I have recently moved into a different home and set up the internet through Airport Extreme that works fine. However, I can not find the external hard drive plugged in to the Airport USB which used to show up in Macintosh HD under Devices.
I have unplugged and restarted the Airport, hard drive, and IMac numerous times. I have reset the Airport back to original settings and created a new network. Not sure what to do next.

The drive was hooked in the exact same way 2 days ago at my old address and worked perfectly.
"The drive must be formatted in Mac OS Extended (Journaled) to work at the USB port of the AirPort Extreme, so that would be the first thing to check."
How do I do this?
"Next, the power at the USB port is borderline as far as its ability to supply adequate power to a hard drive....even if the hard drive has its own power supply.....so a number of users find that they need to use a powered USB hub."
I will look in to finding a powered USB hub but I don't understand why it would work 2 days ago and not today...
"You will need to open the Finder and click on the Go menu, then click Network to see the drive. Double click it to mount is on the desktop."
Correct, I used to find Airport there under Shared where I could click on Airport to access the hard drive. I don't see Airport at all.
"Finally, if you are planning to use the drive for Time Machine backups, that type of setup is not officially supported by Apple, so results will be unpredictable if you try this."
My hard drive is exclusively music files that I share between Imac and Macbook.

Terminal - how to find my external hard drive using unix commands

just discovered terminal and using cd and ls commands, which are the only commands i know, i realized that i can't find my external hard drive. i thought it would be listed on my desktop, as it is in the OSX interface, but it isn't there.
not that im skilled enough to use terminal yet, but i thought the first step would be being able to navigate the computer's files.
really curious as to where my external hard drive is and how i can find it using unix commands in terminal.
i was trying to figure it out myself, then i thought surely someone knows this and could tell me in a sec.
thanks.
ibook Mac OS X (10.4.4)
ibook Mac OS X (10.4.4)

"ls /Volumes" will list all volumes, including internal and external hard drives and mounted disk images. I find "disktool -l" more useful in scripts, as it tells you which volume names correspond to which "mount points" under /Volumes. Usually they're the same, but if you have two volumes with the same name, or you try to remount a removable volume before it is fully unmounted, you'll end up with a mount point that consists of the volume name with a numerical suffix.

Need to find my external hard drive folder

I have a Passport as an external hard drive and when I plug it into the USB drive I cannot locate it on my computer.

Do you have the External Devices checked in "Finder Preferences"? You can open by selecting the menu item (while in the Finder) "Finder > Preferences"
x`

Cannot access shared external hard drive with other mac accounts

I cannot access a shared external hard drive with other mac accounts (all accounts are on the same macbook Pro). The shared external drive is shared via time capsule and is connected (of course) in USB. I see well this external hard drive as a shared disk with my main account. Yes shared option has been activated with the Airport Utility .. but when I open other account these othe accounts can see the external drive but cannot access to its content that is flagged with a no way sign. Strangely enough when I close my main account and start opening a new session with one of the other account then fine I can access the external hard drive and its content .. BUT then it is from my main account than I cannot access its content the no way sign showing ..
Looks like only one account at a time can access the content of this SHARED external hard drive .. any one as an idea on how to really make it a shared hard drive so that all accounts on the same mac can also access it ? I am at my wit ends on this case. THANKS ..

Results of my enquiries at Apple Genius Bar .. the guys found the problem interesting. They've been unable to provide a fix neither to give any explanation as to the reason why. To be fair I was not much impressed by the technical level demonstrated ..
In the mean time I have found that if account no.1 can see the shared external drive content and in such case account no.2 (same Mac computer) cannot see its content (only the external HD with a no way sign) this account no.2 can UNMOUNT (by ejecting) this external HD from account 1 and then remount it (just clicking on the TC shared part in a finder window) and .. see and access its content ; whilst account no.1 cannot see its content anylonger. Unless it unmounts the shared external HD and remount it .. then account no.2 can see its content anylonger. This can goes on an on.
So eventually YES the TC can allow to share a USB external drive between several accounts and a same Mac .. BUT this require to unmount and remount EACH time the external drive is accessed from a "no.2 account". So OK to share files with seldom access but not practical in case of frequent access needed.
I just I have now to figure how iTunes can automatically unmount and remount a shared external HD when it needs to access one of this shared HD content from on time account no.1 and then next time from account no.2. May be I am asking too much ..

Cannot see my external hard drive on the desktop

Hi,
I am at the tail end of a large documentary project on FCP. Suddenly, this evening my external hard drive (Maxtor One Touch III, Turbo Edition, 1.5TB) becomes sluggish. I shut down (all properly) and restart and the external hard drive is no longer on the desktop (does not mount and cannot be seen anywhere).
I change ports (from one FW400 to another), try connecting to a different Mac (was running on an iMac, try connecting onto a G5) and still cannot see the hard drive. I try connecting using USB2 and still cannot see it on the desktop. I run disk utility and the hard drive shows up in menu on the left, I am able to run "verify disk" as well as "repair disk" - hard drive is fine, no errors no problems. However, I still am not able to access the drive - just does not show up on the desktop or anywhere else where I can get into it. I run the install disk that came with the hard drive (Maxtor) and a backup utility can detect the drive and shows that 1.37 TB of data is safe (so no data loss) but I can still not detect the Hard drive. I also noticed that the light on the hard drive is active indicating that the drive is being accessed.
Problem is simply that both my Macs do not show the drive regardless of how I connect them to the drive (FW400, FW800, USB2 and every port has been tried).
Need help here...please....
I realize this might be more suited for a general OSX or Hard drive issue, but since I have always got great answers from FCP users that I am posting this question here.

Hello all,
Thank you for all your comments and suggestions. I downloaded Disk Warrior 4 from Alsoft - paid $108, followed the instructions to the letter (after reading and rereading sevral times) and ran the utility...it detected the Maxtor HD, pointed out several errors, repaired the errors, and then gave me the option to preview the new and compare to the old HD...this is where things went wrong. There was no HD to be seen - new or old...same problem. HD is not visible on my Finder, on the Disk Warrior Preview or on the desktop. I went ahead and rebuilt the HD...all errors fixed, Disk Warrior states that all is fine and dandy and that my hard drive should be perfect and I can access it...BUT its still not there, I cannot see it on the desktop nor anywhere else.
It shows up in Disk Utility as a page icon - but I cannot access it.
So, unfortunately for me...my problem still remains and I am now out a hundred bucks!
Please, anybody out there - who can give me some direction - I would greatly appreciate it.
BTW, the data is still all there and the light on the front of the drive keeps flashing indicating something is going on...but drive is not mounted, invisible.
I read on the Maxtor packaging something about a built in Maxtor DriveLock - a password protected security measure against theft and loss...could I have inadvertently activated that and that is causing the problem...please advise.

A big thank you to the person who said to go to edit/preferences/advance tab. I did that but I could not find my external hard drive which is a passport. I could not find it on my pc or control panel. I know it it there. Help!!!

A big thank you to the person who said to go to edit/preferences/advanced tab. That helped. My external hard drive is a passport. I know I have it , I just can't findit. Not in control panel or desk top. I don't know how they named it. Please help!!!

What Mac OSX version are your running ("iOS" as shown in your profile cannot run on a Mac computer)?

I have two iPhoto libraries: one on the hard drive, and one on an external hard drive. I cannot access my external hard drive iPhoto library. Help!

I have two iPhoto libraries: one on the hard drive, and one on an external hard drive. I cannot access the iPhoto library on the external hard drive. Yes, it is plugged in!

How are you trying to access the EHD library? Can you open it by launching iPhoto with the Option key held down and selecting the EHD library in the window that appears?
OT

Am using 2007 iMac running 10.4.11. Do not wish to upgrade now. Where can I find an external hard drive to work with it? Also need a printer?

I'm using a 20" iMac that I purchased in 2007. It's running OS 10.4.11, and still doing beautifully. But I've got to get serious about upgrading and I don't want to lose the material that's on it.   Purchased an external hard drive about two years ago, copied everything I wanted at that time on to it. When I tried using the h.d. a few days ago it was garbled. Now I see that inside the box it says that it requires OS 10.5+.   Anyone know if there's still a new hard drive out there that would work with 10.4.11?   Can't even find thumb drives to work with my system anymore.   Any ideas would be appreciated.

If I were you I would bite the bullet and upgrade to Snow Leopard. You will still be able to use AppleWorks by installing the Rosetta emulator included in Snow Leopard. And, it's a much better OS version than Tiger.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
See App Compatibility Table - RoaringApps.

I cannot find my external hard drive

Similar Messages

Maybe you are looking for