I cannot find my Tecra A11 sub model number!

I search on every sticker at my laptop, on bios, and even on laptop box but it is only mention that I have TOSHIBA TECRA A11 laptop.
They never mention complete model number, while I need to know model number to download some drivers since I lose all CDs.
Please guide me how can I find model number.

Tecra A11 (PTSE3U-0FN01D)
Toshiba makes special models for some big-box stores. Others in the same part-number family (PTSE3U) have essentially the same drivers and utilities. Compare your specs to these.
Tecra A11-S3531 (PTSE3U-06N00G) - Go here.
Tecra A11-S3540 (PTSE3U-00R00G) - Go here.
-Jerry

Similar Messages

Preverification error: Cannot find class com/sun/perseus/model/Viewport

Hi all,
I have a (previously) working Midlet to which I have added one line as follows:
SVGImage image = (SVGImage)SVGImage.createEmptyImage(null);
- and imported the necessary from javax.microedition.m2g. (I am using the library that comes with the WTK, jsr226.jar).
This builds, jars, obfuscates fine. But when I try to preverify (using Antenna's wtkpreverify) on the jar, it gives up in disgust very swiftly as follows:
[wtkpreverify] Error preverifying class javax.microedition.m2g.ScalableGraphics
[wtkpreverify] VERIFIER ERROR javax/microedition/m2g/ScalableGraphics.render(IILjavax/microedition/m2g/ScalableImage;)V:
[wtkpreverify] Cannot find class com/sun/perseus/model/Viewport
I'm using the WTK2.5.1ea and antenna 0.9.14, CLDC1.1, MIDP2.0...
Many thanks for any ideas.

Problem resolved simply by replacing jsr226.jar (as distributed with WTK2.5.1ea) with m2g.jar (as distributed with J2MEPolish).

I am trying to buy Ai and my trial is up. It is asking for a serial number and I cannot find an e-mail with the number. What shall I do?

I am trying to buy Ai. My 30 day trial is up. It is asking for a serial number and I cannot find an e-mail with the number. What shall I do?

Please refer below link :
Creative Cloud pricing and membership plans | Adobe Creative Cloud

Find my HP Pavilion Slimline model number

how do i find my HP Pavilion Slimline model number - when i enter the one on the label it asks if it was purchased in another country. I'm need to update some programs and this is very frustrating

Mariaq, welcome to the forum.
Here is a guide to help you identify your computer:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07555&lc=en&cc=us&dlc=en
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Problem in creating Data/Service in FlashBuilder 4 beta 2 with this error .cvc-elt.1: Cannot find the declaration of element 'model'

hi
i have a problem after installing flashBuilder 4 beta2 .
when i want to create Data/Service with BlazeDs and when i click on button finish
this error shown and I can't do anything with it .
in flashBuilder beta1 it's work perfect .
if any one in thereand know why?
please help me
ERROR: XML parse error : Error on line 1 of documen : cvc-elt.1:Cannot find declaration of element 'model'. Nested exeption:Cannot find declaration of element 'model'.
thanks

Hi,
Thanks for your feedback
Can you attach your sample project and provide details on the Flash Builder and BlazeDS builds you are using?
Also add your vote to http://bugs.adobe.com/jira/browse/FB-23479 a similar known issue
Thanks,
Balaji
http://balajisridhar.wordpress.com

I cannot find the Tecra R850-1KX on the support portal

Hey
I Cant Find My Laptop Which is R850-1KX in the support portal
My Product code is PT52SE-001001FR.
So please if there's anyone who can help me i'll appreciate it.
thanx

As far as I know not all notebooks can be found via support portal.
As you said, Tecra R850-1KX has an model number: PT52SE-001001FR
It seems that it was released in France and the unit belongs to PT52SE series.
If you need drivers for this unit, go to Toshiba EU driver page and choose the R850 PT52SE series

Cannot find ANY drivers for my model please help!!!

Hello, i recently had to replace the hard drive for my Toshiba Satellite A200. now the trouble im facing is that i had to use a full clean copy of windows to install on this laptop thinking that the toshiba website will have the drivers that i am looking for. well it turns out they dont... i cannot even find the display adapter driver for this laptop let alone the network driver, mass storage driver or anything really.
So please, here is the info for the laptop and if anyone can point me in the right direction for finding these drivers it would be greatly appreciated.
Toshiba Satellite A200 ( thats all it says in system infor and on the bottom of the laptop)
Model number: PSAF3U-0UT0IC
VISTA 64

Hi Looks like you made top billing on Google!https://www.google.com/search?q=PSAF3U-0UT0IC&ie=utf-8&oe=utf-8&aq=t&rls=com.yahoo:en-USfficial&clie...
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

Re: Satellite M35X-S149 - Cannot find correct battery to this model

I can not find the correct battery to this model.
I have looked on Toshiba websites, but I haven't find yet.
That model doesn't recognize by toshiba tool finder.
If somebody has some idea where I can find suitable battery I will be grateful.
Battery model No is: PA3395U-1BRS

Hi
You have already posted the battery model number.
Where is the problem? Google for this battery and Im sure you will get some online dealers who could provide this battery.
Otherwise get in contact with an Toshiba ASP in your country and order the compatible battery.

Cannot find a qualifying product for serial number

I downloaded and installed the upgrade from Acrobat XI Standard to Acrobat XI Pro. When I launch the product, it tells me that I have a valid serial number, but it cannot find a qualifying product on my computer. There is a drop down list to select various products, but Acrobat XI Pro is not in the list. This makes no sense to me. What do I need to do to actaully get this program to register and run????

There is no upgrade path listed on the Adobe website from Acrobat XI Std to Acrobat XI Pro
http://www.adobe.com/products/acrobatpro/buying-guide-upgrade-pricing.html
The Acrobat XI Pro installer has searched your computer looking for one of the Acrobat versions listed on the above link which qualify for an upgrade to XI Pro. It didn't find any already installed.
Now it's asking you to manually select (from the dropdown) which eligible product (i.e. one of those in the link above which qualifies for an upgrade) you have a serial number for.
If you don't have a serial number for any eligible product then you'll be unable to use the upgrade.
If that's the case contact Adobe to discuss your options (which may include returning the upgrade)
http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
http://helpx.adobe.com/contact.html

I am trying to find out what the FULL model number is on Satellite Pro L500, please help!

Hi, I have a Satellite Pro L500, but I am trying to locate the rest of the model number (L500-XXXX.... etc). I have looked on the bottom label, and all it says is Satellite Pro L500 SYSTEM UNIT.
My part no. is PSLS1A-031002
My HDD is 500gb
RAM is 4GB (which I think was upgraded from 2GB)
Windows 7 Home Premium
Pentium Dual-Core CPU T440 @2.20GHZ
If you have any idea what it could be, please help me

Satellite Pro L500 .. PSLS1A-031002
Must be this one.
Satellite Pro L500 (PSLS1A-030002)
The original memory is 4 GB.
This site is for US computers. The drivers and utilities for that Australian model are here.
-Jerry

Trying to find out if X220 with model number 42875TU have the IPS screens

Hi, I'm trying to find out if X220's with Model Part Numbers of 4287-5TU have the IPS screens? I cant find the model through the Lenovo model search. Thanks for the help.

Hi
I can't explain why partslookup service by MTM doesn't show your laptop parts. Though support site contains its short specification.
Try to get parts list by laptop serial number if you know that one:
http://support.lenovo.com/us/en/partslookup
You'll find the panel p/n and its description.

Can't find my Toshiba Satellite model number

I've been trying to figure out if my laptop has an internal modem (I don't see it, but I want to make sure it's because it's absent not because I am missing drivers). Anyways, I cannot find the model of my laptop. The label on the bottom is gone.
I installed EVEREST and Belarc and they both just say "Toshiba Portable PC". Where and how do I find the model of my laptop?
Thanks for your help,
Nova

Thank you for your response
TECRA A11 -S3540 model is closer to my notebook.
If I install the drivers for the Tecra A11-Q-3540 will not cause a problem on my notebook?
And I had another question
My recovery has been deleted
Wrong in fdisk
I made my all hard drive to delete / destroy my
With many programs try to restore the recovery drive but did not result
How to recover my notebook drive recovery
Do you have an idea
Thank you very much from the rapid response and guidance
abdollah

Tecra A11 - LED backlight issue

I have big pain in my eyes after day of work with Tecra A11 BIOS V1.7 = newest BIOS update. Wenn I bought it there was BIOS 1.4 the same problem with eyes, LED backlight killing my eyes, big pain after day of work. V1.5 and 1.6 are much better (no pain) but new BIOS 1.7 is the same eye-killer as 1.4.
Who is going to help me? Users of this forum?
I want Toshiba people to help me, they sell 1/2 ready product, absolutely bad work! No contacts to Toshiba just this user forum. Is Toshiba interested in my problem with his bad Tecra A11 notebook and stupid BIOS updates? I am really angry, never had such problems with so expensive notebook. So excuse my emoutions I start to hate Toshiba for the extremly bad experience with this Tecra A11. Why should some users of this forum help me? I paid a lot of money to Toshiba, so I want Toshiba people to tell me what they do in their BIOS updates, what stupidity kill my eyes with LCD backlight. How many BIOS updates will be needed to make Tecra A11 working properly for 800 EUR? I will never more buy something from Toshiba.

Thanks Xardas,
One week and we have BIOS Update 1.9 !! = aproximately one update a week. On one side very nice to see that Toshiba takes care of the problems. On other hand why are so many updates needed? Was this Tecra A11 is sold as final product with 1/2 unfunctional BIOS? Wenn I bougt it I had BIOS 1.4 and I tell you there were mistakes even when you went through the menu, so if someone tested it in Toshiba he could see it. So I have really feeling that Toshiba didnot test BIOS properly. That is maybe why they need to update BIOS so oft. They use users as testers, what is for some rare problems OK, but not for common bugs!
Why does not Toshiba describe what exactly is updated in new BIOS version? Where can I find this information, e.g. what is changed between BIOS 1.6 and 1.7 and so on.? I need this information because I really do not know what is going to happen if I update to 1.9 now. I do not want to spend another day with playing with bios, and in worst case to kill my eyes with bug in LED Backlight. So where can I find what is new in BIOS 1.9 ?
My LED Backlighting problem is in BIOS 1.4 and 1.7. You cannot see that something is happening, but after day of work (8 hours) I cannot look at Tecra A11 monitor any more, because of pain iu my eyes. I thing this happens because LEDs in Backlight are too strong and maybe Toshiba uses some kind of pulse modulation to control LED brightnes. So you see brightnees is low (no strong), but in reality maybe you get a strong flasshing LED light into your eyes whitout brain sense for it. So you see normal backlight, but mayby you become very short time strong impulses of LED full intensity into your eyes what you do not notice, only as pain after many hours. This is my explanaition but I didnot measured it. Toshiba sold notebook with Bios 1.4 and immediately updated to 1.5 where this problem was solved. Thats why I was thinking that they know about this problem and they just solved it for ever. But in V1.7 problem ware back, and my eyes took 2 days to recover from pain. So it is really angry bug and I do not know if to stay by Bios 1.6 or to try update to 1.9. I want Toshiba to describe what is going on in BIOS updates.
Maybe this is problem of only my notebook so I will try to contact authoorized service provider, but I would be really positively suprised if they know what to do with it. We will see. But please if you know, answer me where is information what is new in BIOS Updates from Toshiba. Thanks

Cannot find the configuration file

Hi...
I have configuration problem, while i press a submit button in my application
This is the error...
JBO-33001: Cannot find the configuration file /empApp/model/common/bc4j.xcfg in the classpath
can any one help me...
Resmi.

Hi Resmi
It seems the configuration file of your app module has been delete, try re-creating your Module configuration or creating a new Module.
Good Luck

Cannot find a mounting to install a second hard drive in my Qosmio x70-A

I have looked all over the internet and have gotten no where in my search for a mounting for the secondary hard drive bay in my laptop. Anybody know where I can get one?
Also I've included pictures of the secondary drive bay and the primary bay. From the looks of it I can't use the same type of mounting in the secondary bay as in the primary.
Attachments:
20140714_220231.jpg ‏1868 KB
20140714_220242.jpg ‏2068 KB

I have the same issue, and have found Toshiba support to be completely unacceptable on this.
After getting bumped around from sales to tech to sales because "we don't answer that question, you have to talk to the other guy", I finally got a "straight" answer from sales:
"Sir, we DO NOT sell that part, and therefore I CANNOT tell you a part or model number for the part you may need to install that second hard drive. The only thing you can do is talk to our parts supplier over at National Parts (1 800 524 8338) and ask them to provide you with the model numer or sell you the part."
At this point, I was annoyed, but thought that at least with a straight answer I could proceed.
After a very short hold time with National Parts, a very kind associate answered the phone and listened to my tale of woe. Unfortunately, she was unable to help and said:
"Unfortunately, sir, I have listed that while there is no caddy for the second hard drive slot on you X70-A specific model, there is supposed to be a mounting bracket. Unfortunately, we have been trying for MONTHS to have Toshiba give us the part number, spec, or any other information other than 'mounting bracket', and therefore I'm afraid we have neither a part to sell you nor a part number for you to go looking for one".
At this point annoyance is full-blown anger. How is it possible for Toshiba to make something that should be SO SIMPLE so VERY VERY VERY complicated and impossible.
"Sorry, if you didn't want to spring for the dual drives when you bought it, you're hosed forever sucker." Does not seem like an excellent customer service strategy.
This was the FIRST Toshiba I'd ever decided to spend my hard-earned money on, and now it's a machine I can't upgrade because they can't get their act together with their parts supplier or in-house over a 3 dollar bracket?
UNACCEPTABLE.
The pictures the original poster shows are exactly what I have, no need to add more o fthe same.
ANY help, Toshiba?

I cannot find my Tecra A11 sub model number!

Similar Messages

Maybe you are looking for