I cannot find the 'Gulim' font in Word or Excel on the Mac (book)?

Hello all,
I've recently shifted from PC to Mac and welcome the change. I've no complaints but there is one thing that is driving me insane.
I use the font Gulim for my work. I've installed it and it is present in the 'Fontbook'.
I can access it in Illustrator and Indesign.
But I cannot access it in Word or Excel for the Mac (2011).
I'm using a Mac Book Pro 15 inch 2013, OS 10.8.4
This is driving me mad.
Can anyone advise me how to get access to Gulim in Word and Excel?
Many thanks in advance.
K

"Could you explain where you think you have to pay something?"
I signed up for the site and posted a question their response was that they had an answer and they required credit card imformation.
"If your problem is to read existing Excel files, then I am very surprised that OpenOffice would not open them. If you could send me one or provide a url I could see what the problem is (tom at bluesky dot org)."
I can down load the files just fine and they open. the numbers in the documents will display but text will not what I get is this : "__________" where there should be text.
Try this site and download the the Doc (rar). it will open on my computer as an excel file but there will be no text just "__________" Open office will not open this file, but excel will.
http://militera.lib.ru/h/sovaviation/index.html

Similar Messages

HT1725 Hi, a few hours ago I purchased an "audio book" from i-tunes and i samw the files were downloading on my iPad, but I cannot find the audio book! What happened? Please, guide me

Hi, a few hours ago I purchased an "audio book" from i-tunes and i samw the files were downloading on my iPad, but I cannot find the audio book! What happened?

HI CEGS,
Welcome to the Support Communities!
Audiobooks can be found in your Music app on the iPad.
I've referenced the section of the iPad User Guide (page 78):
manuals.info.apple.com/en_US/ipad_user_guide.pdf
See additional browse buttons: Tap More.
I hope this information helps ....
Have a great day!
- Judy

-1007f cannot get the Mac book air to reinstall, no drive. For disk and no connection

-1007f cannot get the Mac book air to reinstall, no drive. For disk and no connection please help!!

You can download the product from this link:
<Download Photoshop Elements products | 13, 12, 11, 10>
Your redemption code/Serial number will work with these downloaded products.
Make sure you download the correct version for your operating system - Windows or Apple MAC
Good luck.

I cannot get the mac book to automatically remember my e mail and passwords in hotmail, any ideas please

I cannot get the mac book to automatically remember my e mail and passwords in hotmail, any ideas please

MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro
http://www.apple.com/support/mail

I have just dowloaded an audiobook from amazon to itunes. I have synched my iphone 4s but cannot find the audio book on my phone. Can anyone help me locate it please?

I have just downloaded an audio book from amazon to itunes. I have synchronised my iphone 4s, but cannot locate the book! Amazon says to tap the ipod icon but i do not have one!! Can anyone help me locate it please?

kikuyujen wrote:
Could anyone help me find an article called Switch 101 that helps people converting from Windows to Mac.
Just Googled "Switch 101."
http://www.apple.com/support/switch101/

I cannot find the Mac HD in my computer.

Hi!!! My name is Beatriz and I have been trying to update some of my mac's software and I haven't been able to do it due to the lack of a hard drive image during the installation process. After all this happened, I searched for some solutions by myself, i tried to run "disk utility" but it just crashes down everytime I try to use it. I can never see the hard drive image whenever I use the "startup disk" utility. I really don't know what to do because I haven't been able to update my software since March.
I really hope you can help me
Power PC G5 Mac OS X (10.4.5)

Welcome To Discussions Beatriz!
Is this issue the same as your post HERE?
"Hi there! I know probably this will be the dumbest question but I really don't know what to do. My sister's mac is unable to update the software, so I cannot update itunes nor any other software. I really think that I should reinstall de whole software so that it can work properly once again. Do you recommend it??? How can I do it?? Sorry about it, but actually I need something like "Mac for dummies"."
Exactly which Mac model are you trying to upgrade?
What size is the Hard Drive, and how much space is available?
How much RAM is installed, and is it original or added?
Exactly what are you trying to update? The OS or applications?
Which of these; Repair Disk or Repair Permissions, crash when you run Disk Utility?
Other than not being able to update, is the Mac functioning properly?
ali b

Cannot find The paid books On ibooks. Only freeware

Can anyone help?

Apple won't have been licensed to sell books in all territories - if you are in one of them then, unfortunately, there is nothing you can do about it : Apple can only sell what/where the copyright owners allow them to. Have you got access to other ebook apps/retailers such as Amazon (Kindle), Nook etc ?

Cannot charge the mac book pro after updated with Lion mountain patch.

Yesterday , i updated to Lion mountain patch, I am not sure what the version is. But after that i dont see the laptop is getting charged.My battery completely drained off. I dont know how to resolve this issue.But i am not sure because of the "update" only it happened.Is there any way to charge up the lap ?
any help is much appreciated. Thanks..

I just plugged in the charger after 10 hours. Now , eveything looks good.
Mysteryyy!!! Woohoo!

How to find the MAC address of my iPad2?

My WiFi hot spot has MAC address filter for better security.
But I cannot find the MAC address of my new iPad2.

If you need to setup wifi to start the MAC address with iPad, try the http://www.ipad-tablet-help.com/2010/03/how-to-find-ipad-mac-address.html to find it out. Works for iOS5.

I have my download content code for the new Mountain Lion, and the printed instructions tell me to open the App Store select 'Redeem" in the quick links, enter my code. The problem is I cannot find the "Redeem" word in the quick links? Where and why does

How do I find the REDEEM word in the quick links section of the Mac App Store? In fact I cannot find the quick Links either?

Click the Featured tab, and look on the right hand side...

I cannot find the icon for office:mac 08 word on my doc, where did it go?

I cannot find the icon for Office: mac 08 word on my doc. I downloaded the whole Office: mac 2008 Home & Student Edition about a year ago and just recently the word icon disappeared. The other Office icons are still visible and i am able to use them but i cannot find the word application anywhere.

Have you used spotlight search? Typed "word" and the application doesn't appear? If it doesn't then it probably isn't around anymore.... so hit command + space ... and type "word"... what happens?

I use firefox to show jpg's from newsgroups via Agent. It now cannot find the file in Agent's temp file if it is not a single word. It will read itemone.jpg but not item one.jpg. I'm using Firefox 3.6.8. I've had this problem since I stated using firefox

I use firefox to show jpg's from newsgroups via Agent. It now cannot find the file in Agent's temp file if it is not a single word. It will read "itemone.jpg" but not "item one.jpg". I'm using Firefox 3.6.8. I've had this problem since I stated using firefox 3. How can I correct it? in English
== This happened ==
Every time Firefox opened
== I upgraded to Firefox 3

I use firefox to show jpg's from newsgroups via Agent. It now cannot find the file in Agent's temp file if it is not a single word. It will read "itemone.jpg" but not "item one.jpg". I'm using Firefox 3.6.8. I've had this problem since I stated using firefox 3. How can I correct it? in English
== This happened ==
Every time Firefox opened
== I upgraded to Firefox 3

Windows 7 Backup "The System cannot find the path specified" - Error Code 0x80070003

I'm having severe problems backing up my own machine to a share on our
FILE-SERVER as \\FILE-SERVER\Backup\
I have already backed up another PC successfully using exactly the same settings I have used on my own PC. So I presume it is nothing to do with the
FILE-SERVER or the Backup settings. It has to be something to do with what I'm trying to backup from my machine.
First some background.
This exercise all began when the Windows Server 2008 r2
O/S fell over on one of our Servers. I tried reinstalling the O/S several times, without success. In the end I grabbed another drive and re-built the O/S. I then had problems promoting it to a Domain Controller on the network.
In the end I renamed the Server from FILESERVER
to FILE-SERVER.
We routinely share four folders on what is now
FILE-SERVER:
\\FILE-SERVER\Backup
- a Folder where backups from all other machines are written, so that they will be backed up with the Server
\\FILE-SERVER\Company
- holds all our Company data
\\FILE-SERVER\GEM
- this is the application folder for our own database
\\FILE-SERVER\Install
- holds all Install files for the software we use
These are all held on a RAID 1 Array that is separate from the System Disk that fell over.
Prior to the Server falling over, I had Backup working fine on my machine.
On my Notebook PC I had made these shared folders 'Available Offline', so that I still had everything available to me when I was out of the office. They were
of course shared as \\FILESERVER\... not \\FILE-SERVER\...
Having got the Server up and going again, I began to get the Backups from the Windows 7 Client PC's going again.
I started with a Desktop, which of course did not have any Offline Files.
That proved relatively straight-forward.
I then started with my machine. Initially I did not make the above shared folders 'Available Offline'. I set up my Backup using exactly the same settings that
had worked OK on the desktop machine. But when I ran the backup I got:
The System cannot find the path specified, Error Code 0x80070003
I tried all sorts of things to get it to work:
I restored the system to the earliest point possible,
I ran chkdsk,
I defragged the drive
All to no avail, so I tried backing up:
with and without a system image,
reducing the backup to a single folder,
a single Folder with only one .txt file in it,
making the Folders 'Available Offline' again.
Nothing made any difference.
In the end I looked in the Sync Center to look at the Offline Files Folder.
Under Mapped Network Drives I discovered I still had the Files and Folders from
\\FILESERVER. In their Shortcut Menu 'Always Available Offline' was greyed out. So I deleted the Offline Copies. This deleted the Files in the Folders but not the Folders.
Since I could find no way of deleting the old Mapped Network Drives, I decided I'd painted myself into a corner by renaming the Server.
So I bit the bullet and re-installed my Notebook too. This did get rid of the unwanted old Mapped Network Drives - BUT NOT THE ERROR!!
I’ve been through all the troubleshooting procedures in:
http://social.technet.microsoft.com/Forums/windows/en-US/629597bb-7be0-455c-b81e-a149472d3f9b/windows-7-backup-the-system-cannot-find-the-path-specified-error-0x80070003?forum=w7itprogeneral
Method 1
It had none of the symptoms reported in
http://support.microsoft.com/kb/973455
but I scanned for ‘reparse’ points anyway. Found several “Junction Points” but none that were “Mounted Volumes”, just ordinary ‘File Folders’.
Method 2
Check a drive for errors.
Looked at:
http://windows.microsoft.com/en-us/windows7/Check-a-drive-for-errors
Checked
both boxes. I closed machine down, to check for errors when it re-started.
It didn’t seem to find anything.
I say seem, because I did not actually see it finishing checking the empty space, but stages 1-4 found no problems and Windows 7 restarted normally.
It did detect 66 ‘Reparse’ Points, which is more than it found when I scanned for them earlier.
Method 3
Yes, I am an administrator or my own machine and, as such, I have ‘Full Access’.
I downloaded an ran the Process Monitor, filtering for Process Name “Wbengine.exe”, but did dot get a single event.
So I’m not sure what’s going on.
HELP - I'm out of ideas!
I have a WORD Document that documents all the Settings I've used on both the Server and the Clients, together with the reasoning behind those settings, but
I cannot find a way of uploading it.

I am having the exact same problem with Windows 7 Professional. Out of the blue, this issue just started a few months ago when running my monthly Windows Backup where I have used a USB drive for the last 3 years, and never ever had this issue before. Most
of the solutions listed on the Microsoft websites and answers deal with
"Restore" functions, not the
"Backup" itself. I have 3 folders being skipped during the backup.
So I went and changed the Backup from "let Microsoft choose files, directories, etc" to "Let me choose". I included the files and folders that were being skipped, and ran the "Backup" again, and got the same error message,
but the files that were skipped the first time were "Backed up" finally. This issue is somehow related to my "Libraries"?
The 3 backup problems are:
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book Recordings. Error:(The system cannot find the path specified. (0x80070003))
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book CD Label-Cover Art. Error:(The system cannot find the path specified. (0x80070003))
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book MP3 Tag Art. Error:(The system cannot find the path specified. (0x80070003))
Did a "checkdisk" - no problems. Ran a program to fix registry - no problems. All updates up to date. I guess I could eliminate these folders from the Backup folders in the
Library, and just choose them under the "Users" locations, and be done with it. But I really want to understand this, and fix it. This is within Windows 7 and may be related to Windows Media Player or
some recent Windows update. Thanks.

The system cannot find the path specified - Problems

I am having an issue that I am hoping someone can help figure out for me.
I am currently learning Java, and am working with the Beginning Programming with Java for Dummies book second edition. I have downloaded and am running the Java 6 program and am using the JCreator 3.5Pro that was recommended to run the Practice files for the Dummies book.
I have the practice files here:
C/Program Files/Xinox Software/JCreatorV3/My Projects
While trying to compile one of the practice files, I get this error message:
--------------------Configuration: MyNewProject - JDK version 1.6.0_21 <Default> - <Default>--------------------
javac: file not found: src_mynewproject.txt (The system cannot find the path specified)
Process completed.
**When I try to execute, I get this error message:**
--------------------Configuration: MyNewProject - JDK version 1.6.0_21 <Default> - <Default>--------------------
java.lang.NoClassDefFoundError: EchoLine
Caused by: java.lang.ClassNotFoundException: EchoLine
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
Could not find the main class: EchoLine. Program will exit.
Exception in thread "main"
Process completed.
When I set up the new file, and the new class, I confirmed the file path.
I know most people will ask if I am absolutely certain I put in the code in properly, and yes I did. It was a matter of copying word for word, and punctuation. I did it 100% correctly. About 12 times. I have NO idea what this means, but I would REALLY REALLY appreciate any help on this.
Please keep in mind, I am slightly clueless, and really need to have any help dumbed down a bit. Lol.
As a side note, this isn't my first project, and I haven't had this problem before now.
thanks in advance. =)

So I wanted to clarify what I've done a bit more since I decided to redownload the dummies programs for the program and try again.
I will try to list my steps in order of what I did and see if I've gone wrong somewhere along the line.
I downloaded my project files from here: http://ca.dummies.com/store/product/Beginning-Programming-with-Java-For-Dummies-2nd-Edition.productCd-0764588745,navId-322469,descCd-DOWNLOAD.html
I unzipped them this time here: C:\Program Files\Java\jdk1.6.0_21\MyProjects\
I opened JCreator 3.5 and starting fresh, with all previous projects deleted and clicked on "Open Workspace". I chose "MyWorkspace.jcw". Right clicked MyWorkspace and chose "Add new Project" and then chose "Empty Project". As per the books instruction for the first project, I named it "MyFirstProject". My file path was: C:\Program Files\Java\jdk1.6.0_21\MyProjects\MyFirstProject. Which is where I upzipped the files. I added it to current workspace and clicked finish.
I then added a new class. As per the books instructions, I right clicked "MyFirstProject" and selected Add New Class. For the name, I used MyFirstJavaClass, which is what the book told me to do. My locations are the exact same as above. and I clicked on Generate new Method, as it told me to. Which it doesn't in the next few lessons, so I know this has nothing to do with it. For that and a few other reasons. Lol.
I clicked on Finish.
All I had to do was replace a single line of code. Not type it all in this time.
Here is what shows up on the screen:
class MyFirstJavaClass {
     * Method main
     * @param args
     public static void main(String[] args) {
          // TODO: Add your code here
I need to change the : // TODO: Add your code here
with the line:
System.out.println.("Chocolate, royalties, sleep");
When I do this, and compile project, I get this:
--------------------Configuration: MyFirstProject - JDK version 1.6.0_21 <Default> - <Default>--------------------
javac: file not found: src_myfirstproject.txt (The system cannot find the path specified)
Process completed.
AGAIN! But it worked a few days ago.
And when I execute, I get this:
--------------------Configuration: MyFirstProject - JDK version 1.6.0_21 <Default> - <Default>--------------------
java.lang.NoClassDefFoundError: MyFirstJavaClass
Caused by: java.lang.ClassNotFoundException: MyFirstJavaClass
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
Could not find the main class: MyFirstJavaClass. Program will exit.
Exception in thread "main"
Process completed.
I really hope the extra info helps someone help me!
thank you!
Edited by: MissPamela on Jul 19, 2010 3:23 PM

"cannot find Arial MT font" error

I have Windows 7 and Adobe 11... Having a problem with some documents saying "cannot find Arial MT font"... some parts of a document will just have dots. I didn't have this problem w/Windows XP & older version of Adobe. I've gone back to Adobe 9.5 & 10..still does the same thing. Documents will open correctly w/PDF...but PDF doesn't give me an option to choose page size which Reader does. Please help.

Arial MT is not a font that comes standard with Windows 7. It appears that the creator of this PDF has failed to embed the font into it.

I cannot find the 'Gulim' font in Word or Excel on the Mac (book)?

Similar Messages

Maybe you are looking for