I cannot get a wi fi signal on my I pad

I Have an ipad, my wife has an iPad mini, I am getting a full wi fi signal on my iPad, my wife has no signal at all, she has not had a signal for days now, we have tried turning it off and on, we have tried holding the home button while holding the on off button, we have tried turning on and off the wi fi button in settings, but no luck.
can anyone help us to get a wi fi signal on her device.
Thanks. M

I Get to reset network settings it tells me " this will delete all network settings returning them to factory defaults ". The options are 1. Reset Or 2. cancel.
What will happen if I choose reset.
Thanks. M

Similar Messages

Cannot get a wi fi signal after turning on wi fi in settings. settings is showing linskys as on but I have no signal on ipod

I am trying to set up a Wi Fi signal on a ipod with no luck. I have gone to setting, turned on Wi Fi which is Linskys and is working correctly here at home but get no signal on the ipod even thourh i can see it is looking for a signal. Linskys is not password protected at this point. I am not positive about the operating system just guessing and airplane is off.

Here's some info for iPads. Most may apply to iPods also.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom
PS
You posted in the iPad forum instead of the iPod forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.

HT4527 Help I cannot get home sharing on to my I pad

Help I cannot get home sharing to work on my I pad purchased yesterday

On your computer's iTunes you've turned on home sharing via File > Home Sharing, and in the Sharing tab in Edit > Preferences you have the 'share library' tickbox ticked (I use a Mac, but I assume that it's similar for PCs) :
On my iPad I'm logged into the same account via Settings > Videos > Home Sharing, both my computer and iPad are connected to the same network (and iTunes on my computer is open), and at the top of the Videos app I get an extra tab :
You are not seeing the Shared tab in Videos ?

I clicked on a video link in my email and now I have a blank page and cannot get back to my mailboxes

I clicked on a link in my email and now I have a blank page and cannot get back to the mail program in I Pad at all. help please!

Try force closing the app.
Force an app to close: Hold down the On/Off button for a few seconds until a red slider appears,
then hold down the Home button until the app quits.

HT1430 I cannot get mail or send mail on my iPad message says username or password for imap.gmail is incorrect

I cannot get mail or send email on my I pad message says username or password for imap.gmail is incorrect

Be sure you use Google's settings from:
https://support.google.com/mail/troubleshooter/1668960?hl=en&ref_topic=1669040#t s=1665018
The key is to be sure you have enabled IMAP on your GMAIL account. Follow the instrunctions on that link. Then be sure to check the Advanced settings from:
https://support.google.com/mail/answer/78892?hl=en

HT4259 I have an 802.11n base and extender and still cannot get a good signal 80-90 ft away . Why?

I have an 802.11n base and extender and still cannot get a good signal 80-90 ft away . Why?

Hardwire is always recommended because there is virtually no signal loss in a wire....at least up to 300 feet or so.
Another advantage of using Ethernet cable...if you can...is that you can locate the AirPort Express where it is most needed.
If it extends using wireless only, it pretty much needs to be located about half the distance from the main router and the general area that needs more coverage.
I like to use WiFi Explorer since it displays SNR (Signal to Noise) readings, which are the best way to evaluate signal quality.
Mac App Store - WiFi Explorer
If the signal is varying constantly, something is causing it to do so....assuming that the AirPorts are functioning correctly.
Cordless phones are a huge problem for wireless networks. You want to try to figure out if the phones are causing a problem as a first troubleshooting step.
That is why I suggested that you turn off the phones for an hour or two and watch the network to see how it behaves. If the signal stops fluctuating....that is a good clue that the phones are interfering with the wireless signal.

TS4062 I cannot get a WiFi signal, which means that I cannot access all of the other features on my ipod. Is there anyway I can access all of the other features without Siri or WiFi?

I cannot get a WiFi signal, which means that I cannot access all of the other features on my ipod. Is there anyway I can access all of the other features without Siri or WiFi?

Hi. The two user tips both describe a sequence of steps that should get your library from the point where it threatens to wipe data from your device to where it is syncing normally, while recovering as much information as possible. It may still be necessary to wipe and reload the device but this should only take place once all the data that can be recovered has been recovered.
Doing step 1 of 8 and then complaining things aren't the way you want them to be yet strikes me as premature...
Since you appear to have all your media content, and we are discussing an iPod classic, not an iOS device, the main worries are already taken care of. What's left is ratings, playcounts, playlist membership and checked status. Since your device holds only part of your library at best you could only recover the missing data for the content that is on the device using third party tools.
Recreating the previous checked/unchecked status of every track in your library from where you are now may not be that easy. Syncing with selected playlists has many advantages, one of which would have been that you would have a named playlist that could have been retrieved by 3rd party software if you had used this method.
You haven't explained what caused your problem in the first place, but if you have a Previous iTunes Libraries folder holding old copies of your iTunes database (generated with each iTunes update) then it would be possible to restore the most recent of these and then update the library with any changes in your media folder.
BTW Apple doesn't offer free support for this kind of issue with iTunes.
tt2

My Droid Ultra cannot get a GPS fix nor a 4G signal

For the past couple of months my Droid Ultra cannot get a GPS fix or a 4G LTE signal. I've tried the following:
1. Downloaded and ran GPS Status to attempt to get a fix and clear the GPS data.
2. Start up in Safe Mode.
3. Check for Software Updates.
4. Re-seated SIM card.
Before I'm forced to do a full factory reset (not even sure that will fix it), is there anything else I can do to see how to get either or both of these functions working again? Thanks!

Thanks for the swift reply Ruth!
I don't recall any major changes a couple of months ago.
I checked Network Mode and it was set to "Global". I switched it over to LTE/CDMA but still only get 3G.
The GPS issue seems to affect all apps that use it. I initially noticed the problem using the navigation tool on Maps (by Google). I've also been able to get a fix using Waze, GPS Test and GPS Status & Toolbox.
In Settings>Location I have set to ON and the following
E911 Only
Mode: High accuracy
Location Services: Google Location Reporting

I have a new HP Officejet 6500A plus. I cannot get it to connect to my Airport Extreme V5.6. It see the wifi signal but Fails on "Filtering" and possibly the channel. Does anyone know how to reset or reconfigure filtering

I have a new HP Officejet 6500A plus. I cannot get it to connect to my Airport Extreme V5.6. It see the wifi signal but Fails on "Filtering" and possibly the channel. Does anyone know how to reset or reconfigure filtering and channel on the old airports?

This is a part of the larger MacBook Pro connectivity issue. There are several related threads dealing with the MBP's networking problems. If your unit is suffering from this type of difficulty, good luck ... (or a long ethernet cable)
(PS Everybody please make noise on this one so apple comes up with a solution.)
< Edited by Host >

I cannot get phone signal when abroad

I have an iPhone 4S and cannot get a signal when out of my home country. Is there a solution for this by changing the phone settings?

Did you enable international use with your carrier before you left? If you did, check Settings>General>Network and make sure that Roaming is turned on.

Cannot get signal on campus....after living here problem free, for 3 years.

I've lived on campus for 3 years. I woke up last night to find my cell phone in a constant state of either "searching for svc" or having no bars. That's kind of weird. I went to Verizon stores a couple different times and long story short, the associate got a new LG ENV3 out of the box for me and let me take that one home and try it. No dice. I cannot get a signal on campus, where I have lived for 3 years and never had a problem with anything like this before. And no, I had a friend over and her Verizon wireless phone was working fine. This is kind of inconvenient for me, considering I can't call or text or receive either of those things when I'm on campus about 90% of my time. I've taken out the battery, turned it off, taken out the battery while it's on, dialed *228, nothing. Nothing. Nothing. Guess I'll just drive a block or two away from campus and hang out in my car where I can check my texts..

Nope..I definitly should be all recent. I am in Kearney Nebraska and have been for 3 years...and like I said I've never had this kind of problem EVER before

HT1414 cannot get phone signal

Cannot get phone sinal?

Make sure you put a valid sim card into the phone firstly and if you have, take it out and put it in again.
Other than that you need to contact your carrier regarding phone signals - a signal is the province of the carrier and nobody else.
Contact your carrier.

Cannot get adat channels 5 through 8 to produce signal in logic

Recently bought an audient as880 going in to a universal audio apollo twin, I receive and hear signal on the console adat 1 through to 8 yet even with armed tracks correct input selected I cannot get adat channels 5 through 8 to produce signal in logic

Jamo82000 wrote:
I am recording at 44.1, I receive signal but only through channels 3 and 4 and no others regardless which channel is selected.
The word clock is on the Ua as this is the master the 880 can only be a slave.
Thanks for coming back I appreciate the feedback
Well, I don't know if this is your problem but you should have a single lightpipe cable coming out of the 880 into the Apollo, correct?
The 880 should be set to Internal clock 44.1 the Apollo should sync to clock that's coming in on the lightpipe cable.
What I described is the standard correct method for connecting two digital units in the configuration you're using.
The Apollo can sync to external clock can't it. Also, if the Apollo has digital settings make sure they're on "8-ch ADAT" not s/pdif. (which is stereo two channel input)
The problems you're describing could be caused by not having the clocks set correctly.

I have the new i-pad and cannot get signal at work. My original i-pad did not have this problem

I have the new i-pad and cannot get a signal at work. My original i-pad did not have this problem. Any clue?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

HT201335 I have just bought apple TV but i cannot get my TV to find the signal from my Ipad 2. I can access my MAC files and play those through home sharing but no streaming from my ipad. It as though the Apple TV is not receiving the signal. What am i mi

I have just bought Apple TV 2 and have followed all of the steps as directed. I have set up home sharing so I can watch the files from my MAC on the TV but I cannot get the airplay to stream my Ipad2 to the TV.
I cannot even get my Apple TV to recognise that my Ipad is even on the same network as it as it gives me no options or recognition that it is trying to send the data.
What have I missed to make my Ipad2 stream the screen image onto my TV...?
Frustrated am i with it...!!

I took a very quick look at the Owner's Manual for that Router.
Much of this you will already know....but:
1. Its a combination DSL modem/WiFi Router
2. It does not have ariel antennas. My experience, the WiFi tends to perform poorly compared to standalone WiFi units and the WiFi range is also limited thus slower the farther away you get (or Apple TV gets)
3. If you don't have a DSL filter infront of it I recommend using one, even if you don't use phones. DSL comes in the pair as a different frequency and its "probably" best to filter it out anyway.....even though it comes in on a dial tone and a dial tone often exists
4. Let me know who you ISP is and I will find out what other Routers they offer.
5. You can buy pretty much any DSL modem / Router online assuming it supports PPOe which most DSL ISPs use
6. If you have not in fact tried running an Ethernet Cable.....try it.....you can get a 100 footer locally for just a few bucks. It could solve a heart ache

I cannot get a wi fi signal on my I pad

Similar Messages

Maybe you are looking for