I cannot get more than 12 to 14 hours out of a full charge, and with a new battery. Is the phone dying?

I cannot get more than 12 to 14 hours out of a full charge, and with a new battery. The battery has been charged at least a dozen times, so I know it's at full charge. Is the phone dying?

Do a Li-ion battery rebuild. Do a full 6-8 hour charge with device in sleep mode, next run it down to about 45-50 % and then a 4-5 hour charge. After that use your phone and take it down to 30%. Another 6-8 hour charge and then down to no lower then 20-25% and one more full 8 hour charge. At that point your battery should be rebuilt back to a normal life cycle. This should eliminate your battery problem.

Similar Messages

I dont get more than 2-2.5 Hours out of my MacBook Air (at lowest settings)

I have a serious problem with my MBA. I mainly use it to take notes at University. So my normal usage is: Screen brightness turned to the lowest possible point, WLAN+Bluetooth OFF and Word running.
How many hours do I get? If I'm lucky, 2.5! And I'm not surfing, I dont play any fancy games, I'm just taking notes. Most of the time the screen is completely turned off, because I dont take notes every 2 seconds.
How in the **** did Apple come up with 4.5h of wireless work? If I turn on the WLAN, set the brightness to 40% and surf the Web, I'm lucky if I get 1.5hours out of my battery.
According to iStat my battery life is at 88% with abou 60 cycles. But I'm seriously considdering to take my MBA back to the Apple Store, because it's pretty much useless for me right now with less than 2h of battery life.
Are you guys getting any better results? I googled and I found reviews that said they were able to surf the web for "close to 4 hours" with brightness at 40%. HOW is this possible???!

You should definitely be getting more than 2 hours (or so) with the configuration you're currently using. Curious, what does your battery statistics look like... Give a full charge, start using it in the configuration you normal use it and copy/paste the info (after about 20 minutes of use).
Apple Logo > About This Mac > More Info > Hardware > Power
Model Information:
Serial Number: SMP-ASMB017-3921-665
Manufacturer: SMP
Device name: ASMB017
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 0009
Hardware Revision: 0401
Cell Revision: 0100
Charge Information:
Charge remaining (mAh): 1331
Fully charged: No
Charging: No
Full charge capacity (mAh): 4908
Health Information:
Cycle count: 3
Condition: Good
Battery Installed: Yes
Amperage (mA): -919
Voltage (mV): 7409
Be curious to see the Amperage, Voltage, Full Charge capacity.
On a side note, I've seen significant battery improvement on my machine when backlight is set to max versus 20-30%. It's approximately 25-30 minutes of additional run time over a consecutive run time from 100% to 5% battery.
Secondly, AppleCare does NOT cover the battery replacement "for free." There are specific requirements that would qualify a battery for a replacement under the limited one-year warranty and AppleCare but it's not a "gimme."

Cannot Get More Than 3 Wireless Connections

Howdy, I have a Linksys WRT54G v8. I can't get more than three wireless connections established to the router at a time. Is this a known limitation of the Linksys hardware or am I experiencing a novel problem. I've changed frequencies and switched from mixed mode to G only in order to resolve the problem but these have not made a difference. Allowed number of DCHP users is set to 50. Any suggestions?

In theory, your router can support up to 32 wireless users. However, since the 54 Mbps bandwidth is shared, the practical limit is much lower, but should be more than 3.
How many "4th" computers have you tried to connect? What exactly happened when you tried to make the connection? Did you turn off the wireless computer's software firewall before you tried to connect? Is the wireless computer setup to "Obtain an IP address automatically" and "Obtain DNS server address automatically" ? What wireless adapter(s) are in the computers? Please give all details of computers that failed to be "number 4".

Cannot get more than 8 item in list component

Hi,
I can't get more than 8 items in list component using getItemAt(), it returns null. I will search more for this but no result.
Please Help me here to move to next step.
Thanks
Sureshkumar G

If you're asking if you can overall, yes you can:
http://help.adobe.com/en_US/as3/components/WS5b3ccc516d4fbf351e63e3d118a9c65b32-7f41.html
If you're asking if you can do this in the same context, off-screen, no you still get the same error as the .enabled property.
I hate to throw a hunch but I feel as though Adobe is employing something I'm used to in native iOS programming (Apple Devices). In lists they have something called "dequeue". It's the reason an extremely long list scrolls smoothly. What it does is render ONLY the rows that are in view. When a row is about to scroll off view it deallocates it from memory and then recreates the next row. They do this so you only ever have the current amount of viewable rows in memory and it speeds up scrolling. Although, I can make property changes to items in an iOS list that's off-screen so they don't have this issue ;(. Just food for thought.
I'd submit it to the bugbase and see what Adobe states. They may say they intend you to get the item in view, alter it and then go back to your previous position. That would be silly but at most I can tell you I definitely get errors trying to access an element outside my view. They're probably not used to items needing visual toggles when you can't even see them.
edit:
On a further note I tried the scrollToIndex() method, tried to disable, that much worked fine. The second I then scrolled back to the previously selected index the list screwed up.
I even daisy chained functions a second apart (30 frames worth of wait). I scrolled down and that worked so I waited 1 second. I disabled the visible item I wanted to and that worked so I waited another second. I scrollToIndex(0) to get back to the top of the list, the list blew up. Random items (several items) were disabled and the one that I explicitly disabled was enabled.

Cannot get more than 54Mbps N speed in Windows

I have a 1st-gen Airport Extreme (dual-band) Base Station, firmware 7.4.2, and a MacBook Pro, "Mid/Late 2007," 2.4GHz. I have separate 2.4GHz and 5GHz network names on the AEBS. I have a great 300Mbps connection when I am in OS X 10.6, but when I switch over to Windows 7 on the MBP, I have never been able to connect at more than 54Mbps. I have connected to my friend's 2nd-gen AEBS in Windows at 300Mbps, so I know it's not my MBP. Is there any way to fix this connection speed in Windows? Thanks for any suggestions.

I do have the Radio Channel Selection set to Automatic. Would it make a difference to specify the 5GHz channel?

I bought a ipad mini online from the apple store. His battery doesn't last more than 6h. I return it back to them they send me a new one, but the problem is same. Battery doesn't last more than 5-6h!

I have purchased a iPad mini online from the Apple store. Since day one I had 2 issues with it. First is that the battery life doesn't last more than 5-6h active usage, and the second one is with the wi-fi. It works properly but after I leave it for a while in sleep mode and try to reuse it, it doesn't want to open a web page or app store or mail (anything connected with the internet search) but it shows that is properly connected with my home network. So I have to turn off the wi-fi connection and turn it on again so it start to work properly. After couple off days this becomed very annoying so I contacted the support via phone and they gave me instructions for return it and that I'll receive a new one without aditional fee. I get the second device in the predicted time but again I have the same issues with the wi-fi and battery life. I will be pleased if someone from the Apple expert team explaine to me what should I do, because I dont find it for normal what is happening. On the Apple official site under the specifications for iPad mini it says that the battery lasts for at least 10h and the wi-fi problem isn't mentioned anywhere. Thanks in advance.

This is a user to user forum. No one here is an employee or representative of Apple.
If you want someone from Apple to explain what you should do make an appointment at an Apple store if there is one near you and take your iPad there and talk to Apple. If no Apple store is close enough then call Apple to find out what your alternatives are. There is a Contact Info link at the bottom of every page in this forum.

TS1468 I am having trouble with two cover flows duplicating themselves more than once, is there anyone out there that can help me with this, they are not duplicated in my itunes library, just the ipod.

I am having trouble with two cover flows on my IPOD, duplicating themselves more than once, they haven't duplicated themselves in my Itunes library, just the ipod, could anyone have any ideas on how I could fix this problem. I have tried so many times, even if I restore the ipod, it still does the same thing. Please if possible email me at [email protected] with any suggestions.

Aha! I have sorted it.
For those with similar problems, the solution is this:
Macintosh HD > Library > Audio > MIDI Drivers
Then delete DigiDioMidiDriver.plugin

HT204266 Well i downloaded a free app from the app store and after i downloaded it i wanted to get more features but it costed $0.99 so i purchased it and then when i re-oppened the app it was still locked like if i had not purchased it. What am i suppose

Can someone please help me!?

Hi Paula_Carlos,
I'm sorry to hear you are having issues with the in-app purchase on your iPhone.
The first thing I would suggest is to log out of your iTunes Account on your iPhone, turn the iPhone off and then on again, and see if apps finish updating:
Settings > iTunes & App Stores > Tap on your Apple ID account > Tap Sign Out
If the issues persists, the article below will give you a few more troubleshooting steps:
iOS: Troubleshooting applications purchased from the App Store
Try the following steps to resolve your issue, testing the app after each step.
1. Update your device software
Update your device to the latest version of iOS.
2. Check for app updates
Ensure that your apps are up to date:
Open the App Store and tap Updates. If updates are available, tap Update All.
When prompted, enter your iTunes Store account information. App Store will then download and install the application updates.
Note: Some applications may require a Wi-Fi connection to update.3. Install another app from the App Store
4. Restart the application
If the issue affects only a single app, try closing just that app:
Press the Home button to return to the Home screen.
Double-tap the Home button to display recent apps.
Tap and hold the affected app until the red minus appears.
Tap the red minus to quit the app.
Press the Home button, then restart the app.
5. Restart your deviceHold the Sleep/Wake button until "slide to power off" appears. Slide to power off your device. When it is off, press the Sleep/Wake button to turn it back on.
6. Reinstall the affected application
Remove the application from your device and reinstall it.
Touch and hold any application icon on the Home Screen until the icons start to wiggle.
Tap the "x" in the corner of the application you want to delete.
Tap Delete to remove the application and all of its data from your device.
Press the Home button.
Go to the App Store.
Search for the application and then download it again.
Note: If it is a paid app, ensure you are using the iTunes account you purchased the app with originally. If it is not, you will be charged for the app again. For more information regarding downloading previously purchased items, see this article.
I hope this information helps ....
Have a great day!
- Judy

On iPhone 5s, I cannot see more than 11 messages. I have NOT deleted older ones and need to view them. How? Scrolling in the list of 11 does not help.

On iPhone 5s, when I click on "Messages" I can only view eleven when I scroll. I need to view the older ones which I have NOT deleted. How can I do that, please?

You need the version of iPhoto that you wan tot use installed and then follow the IPLM directions
http://www.fatcatsoftware.com/iplm/Help/downgrading%20a%20library%20to%20an%20ea rlier%20version%20of%20iphoto.html
Downgrading a library to an earlier version of iPhoto
If you have a library from a newer version of iPhoto that you simply want "downgrade" to an older version of iPhoto, the easiest way to do that is with the "Rebuild Library" command. You will want to be running iPhoto Library Manager on the machine that has the older version of iPhoto you want to convert the library to. This will create a new library and import the entire contents of the original library into the new one using the older version of iPhoto. As with any rebuild, there are some items that will not be included (most notably, hidden photos, books, calendars, and slideshows), but if you have none of these items or don't mind losing them in the downgrading process, then this is a decent option for converting a library to an older version.
LN

HT5621 I've changed my AppleID because I had to change my email address. But I keep getting asked about my old AppleID because I can back up on iCloud with my new AID or the old one. How do I delete this old ID so I can use iCloud with my new ID

As explained above, my system keeps asking me to fix my iCloud preferences for my old and new AppleID since it's not backing up my files. I don't have access to my old email address and don't have my password for my old AID. How can I delete this and correct my iCloud ID issues? Thanks in advance. By the way, the Apple support articles don't cover this problem in a way that allows me to fix it. This problem exists on my Mac desktop, my iPad, and my

You may want to check, if you have changed all Apple services to use your new AppleID, just in case.
See this link: Apple ID: What to do after you change your Apple ID http://support.apple.com/kb/HT5796http://support.apple.com/kb/HT5796

Cannot move more than 2 mailboxes from exchange 2007 to Exchange 2013

I have been trying to move mailboxes from ex2007 to ex2013with the new-migrationbatch and the new-moverequest command.
I have a DAG-cluster with two servers with all roles.
What happens is that I cannot get more than two concurrent mailbox moves. If I restart the MRS-service nothing happens. I have changed the config-file for the mailbox replication service and currently have these settings:
MaxMoveHistoryLength="5"
MaxActiveMovesPerSourceMDB="20"
MaxActiveMovesPerTargetMDB="20"
MaxActiveMovesPerSourceServer="100"
MaxActiveMovesPerTargetServer="100"
MaxTotalRequestsPerMRS="100"
What is funny is that when I start a new batch with autocomplete off, only two mailboxes goes to 95% and the rest of them is not even started.
The command I use is New-Migrationbatch -local -Name TestNew -csvdata ([System.IO.File]::ReadAllBytes("c:\temp\exchange\migration\testmigration.txt")) -targetdatabases mdb001,mdb002 -autostart
Here is the output of Get-MigrationConfig | fl
RunspaceId : d382f8a7-924a-4f0e-812e-f18970b632e2
Identity :
MaxNumberOfBatches : 100
MaxConcurrentMigrations : Unlimited
Features : MultiBatch
CanSubmitNewBatch : True
SupportsCutover : False
I have off course restarted both servers and services.

Just out of curiosity, on which server you made these changes? Mailbox or CAS? And on Target or Source Server?
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Pop to get more than one value of same type

Hi
I want to give pop up that can take 3 customer numbers
and export it.Problem with <b>popup_get_values</b> function module is that you cannot get more than one value of same type for example here <i>kna1-kunnr</i>.
Is there any function module to solve this problem.
Regards
Amol Deshmukh

Hi,
may be you can use knvv-kunnr for the second value ....
That should also do the job.
regards
Siggi

CANNOT COPY MORE THAN 11 SONGS TO AN 8GB MICROPH

I'm in need of help. I had all my music on my microphoto and one day it started to rebuild it's library and it never recovered. So I did the recovery and formatted, cleaned and even updated my firmware. I rolled back to media player 0 and everything, but I cannot copy more than songs to my player.
I am in need of help. I can verify the space on my microphoto and it's in excess of 7gb.......please help. Thanks.

What you can do is to show hidden files in the control panel
. Open COntrol Panel
2. I f you are in category view, click? "Performance and Maintenance"
3. On the top left corner, Click "File Types"? (If you are in classic view, there is an icon for it)
4. Go to the "View Tab" and select the option "Show hidden files and folders"?
Then plug your ZEN Microphoto to your computer,? Open my computer, locate your Microphoto and try to see if there is any files that are filling up your player. Play around the folders and stuff and If you do find some stuff, delete it from your player.

AI cannot open more than 100MB file

my AI software dont know sudden cannot open more than 100MB AI file, I try clean up temp file, and repair the software, but still cannot open more than 100MB file,
anyone can help, thanks

Ask in the AI forum and provide system info, details about the file you are trying to open and so on. A 100MB AI file can literalyl contain trillions of points and paths and may never be possible to open even on a powerful system. Otherwise it could simply be damaged/ malformated, if this is e.g. exported from a CAD program.
Mylenium

After i downloaded Firefox 7, I cannot open more than one page at a time. I have done everything you suggested about ad-on, etc. Other people are having problems. Can I get reall help with this or should I just reload Firefox 4?

Firefox 7 is a dud. Cannot open more than one tab at a time, will not open additional pages. Nothing you suggested has worked.
Can I take down Firefox 7 and reload Firefox 4?
I need to talk with a live person! I am real disappointed with this.

Sorry there is no telephone support. You could try the IRC if you want a quick response, ( whilst it is [https://support.mozilla.com/en-US/kb/ask open] )
Firefox 4 is not supported, but firefox 3.6 is
* see [[installing a previous version of firefox]]
There is a change to a preference which may help, post back with more details of your problems please.

I cannot get more than 12 to 14 hours out of a full charge, and with a new battery. Is the phone dying?

Similar Messages

Maybe you are looking for