I cannot get my Canon 5220 printer to come up in the add printer list. Where did it go?

My Canon 5220 printer was not showing a connection to my computer. I decided to delete it and readd. When I went to add the printer again, it would not come up in the list. I have done this before so I am not sure what the issue is now. I have it set up as wi-fi. Any suggestions?

Hi there ag.girl,
You may find the troubleshooting steps in the article below helpful.
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
-Griff W.

Similar Messages

I cannot get sound from apple TV. Has anyone had the same experience and what did they do?

Hi, I recently bought Apple TV 2nd gen. I can, after a while, get access to my library but when I start to play movies I cannot get sound. Has anyone had a similar experience? If so what did you do to overcome the problem?

Do the movies contain both stereo and 5.1 audio.
Have you tried toggling the Dolby Digital setting or the Audio Output setting.

Help I cannot get on to itunes. It comes up with the message that msvcr80.dll is missing. But i need very straight forward instruction s how to fix this as I am not good with computers.

Help I can no longer access my I tunes from my computer. It comes up with the message MSVCR80.dll is missing. Can anyone give me very simple instructions as to how i can fix this. I am not very computer literate.

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?

I have recently upgraded to mavericks and I cannot get my scanner to work. I tried deleting the printer and reinstalled it but no luck

I have recently upgraded to mavericks and I cannot get my scanner to work. I tried deleting the printer and reinstalled it but no luck

Canon does not support the MP530 on Mavericks, they have not produced drivers and apparently do not intend to,

I cannot get my ipad to print using my wi if printer. It works with my computer

I cannot get my iPad to print with my wifi printer but it prints from my computer

Is your printer listed on this page as supporting AirPrint : http://support.apple.com/kb/HT4356 ?
If it doesn't support AirPrint then you could see if the printer manufacturer has their own app in the store which supports it (e.g. Epson have an iPrint app, and HP have an ePrint app). If not then there are third-party printer apps such as Print n Share and PrintCentral Pro which might work with it

I cannot get my Canon MX410 to work with my new computer. Computer is Acer Aspire One.

Cannot get my Canon MX410 to connect with my new Acer Aspire One.

Hello.
Please download the latest Windows 8 drivers from our website. You can visit the following link to download the drivers:
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx410#Dr...
If these troubleshooting steps do not work, feel free to call us at 1-800-OKCANON.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I have updated to snow leopard and I cannot get iPhoto to work or find anywhere to download the appropriate version. I have 8.1.2 but it will not open

I have updated to snow leopard and I cannot get iPhoto to work or find anywhere to download the appropriate version. I have 8.1.2 but it will not open. What do I need to do?

Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
LN

I cannot get my e-mail to automatically enter addresses in the "TO:" box. In the past, I would get a list of e-mail recipients to appear when I typed 1 letter. That function no longer works. Do I need to change a setting or what?

I cannot get my e-mail to automatically enter addresses in the "TO:" box. In the past, I would get a list of e-mail recipients to appear when I typed 1 letter. That function no longer works. Do I need to change a setting or what?

Settings > Store > Sign Out.
Sign in with the correct ID.

HT4628 I recently transferred my internet service to another state. Have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the i

I recently transferred my internet service to another state.I have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the internet. Any suggestions?

I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

HT1338 In my e mails, I cannot get to a web page that is mentioned in the body of the e mail

In my e mails, I cannot get to a web page that is mentioned in the body of the e mail.

That's probably a bookmark you have saved in Favorites.
Tap bookmark icon>Favorites>Edit>Delete the bookmark

I cannot get my iMc to switch on - seems stuck on the grey background with Apple logo

I cannot get my iMc to switch on - seems stuck on the grey background with Apple logo

Restart holding the Option key and see if you can select the Macintosh HD as the startup disk in Startup Manager.
Startup Manager: How to select a startup volume
Alternatly if your running a per 10.7 Lion iMac, insert the original Install Disc or Snow Leopard Upgrade disc, boot from it and running Disk Utility Repair Disk.
Troubleshooting Mac OS X installation from CD or DVD
If your running Lion without a disc, use Lion Recovery.
Apple - OS X Lion Recovery - Introducing Lion Recovery

I cannot get my FaceTime to work it keeps giving me the registration error

I cannot get my FaceTime to work it keeps giving me the registration error

You need to log in with your official Apple ID. Have you tried that?
Clinton

I cannot get Bluetooth to work on my iPhone 4. The wheel just spins. What can I do?

I cannot get Bluetooth to work on my iPhone 4. The wheel just spins.

The device you are trying to pair with must be in pairing (discoverable) mode. You can not pair with other mobile phones or computers (except for tethering).

Why am i getting the message cannot get mail or that i am not connected to the internet what settings do i need to be on

why am i getting the message cannot get mail or that i am not connected to the internet what settings do i need to be on

WIFi needs to enabled and you need to be connected to a network. Alternatively, you need Cellular Data to be "on". (Settings>General>Network). But it propably is a problem with your router (at least, it often is with me), provided you are using your private router. Try schutting it off and turning it on again. This usually sorts problems like this out.

TS3991 I cannot get Calendar and mail to delete, multiple duplications in the cloud. I have 60 calendars where only 15 should be there. Please advise.

I cannot get Calendar and mail to delete, multiple duplications in the cloud. I have 60 calendars where only 15 should be there. Please advise.

one last thing: I'm also getting this problem here too:
https://discussions.apple.com/thread/5324398?start=15&tstart=0

I cannot get my Canon 5220 printer to come up in the add printer list. Where did it go?

Similar Messages

Maybe you are looking for