I cannot get my iphoe 5 to connect to a bluetooth speaker which I know is ok because my ipad connects to it
I cannot get my iphone 5c to connect to any Bluetooth device. I know the speaker I am trying to connect to is ok because my ipad will connect to it.
Try disconnecting your iPad bluetooth connection and reinitializing the 5c. This would sometimes get me frustrated with my BT keyboard.
Similar Messages
-
I recently transferred my internet service to another state.I have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the internet. Any suggestions?
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results. -
I cannot get my messages/text messages to work om my Hi. I am sending this thru my iPad. Respond and let me know you got it. Fun fun fun. . I did go and try to another Apple ID different from my iPhone but it still will not work. Can anyone help me?
chicx wrote:
This is the third time of writing this on your Apple Support Communities!
Not with your current user id.
Far too much uneccesary information in your post, which only confuses things, a vast amount!
Let's start with iTunes.
Have you updated iTunes to 11.1.5, because the previous version did appear to have an issue about seeing iPods?
With iTunes 11.1.5 installed, look in Edit/Preferences/Devices, (or use the ALT key, followed by the E key and then the F key) and make sure that the box named Prevent iPods, iPhones and iPads from syncing automatically does not have a tick in the box.
Once you have doen those two things, check to see if the iPod is seen by iTunes.
chicx wrote:
By the way, what does IOS mean? (I thought IO stood for operating system, but am flummoxed by the S on the end.
Really?
OS stands for Operating System. (In computer speak, IO means Input/Output.)
iOS originally stood for iPhone Operating System, but it now refers to the iPod Touch and iPhone. The iPod Classic, which you have listed in your profile as your iPod, does not use iOS.
I assume that you have been listening to the Podcast in your iTunes on the computer as you cannot transfer it to your iPod. It's what I'd do. -
I am attempting to re sync my iPad2 with my macbook pro iTunes and i get all the way to where it tells me to connect to iTunes...which my iTunes on my macbook sees as connected, yet my iPad still tells me to connect to iTunes...AND yet it is connected..HELP
Your iPad is going to show "Connect to iTunes" screen until you either set it up successfully or restore it. If you've already set your iPad up in the past, "Connect to iTunes" typically indicates the iPad is in Recovery Mode and you must restore it.
-
I have a MBP retina and I am having problem when my bluetooth and wifi are both active. My wifi is totally unusable when I am connected to via bluetooth speaker.
Chances are you mis-typed a character in the Wifi password and the devices saved that information. Now whenever you try to connect the device refers to the wrong password and the Jetpack does not accept your connection. Tell your devices to forget the wireless connection and start over.
Once you enter the proper WiFi credentials the Jetpack will allow you to connect. -
I cannot seem to get my iPhone 5S to make a bluetooth connection with my iMac (OSX 10.9.1). Phone claims that the iMac is not supported. Any suggestions?
The only connection supported to your iMac is Personal Hotspot to use the iPhone's cell connection to connect your iMac to the Internet. If that's what you're trying to do, see:
http://support.apple.com/kb/TS2756
Otherwise, as Raymond said, connecting your Mac and iPhone via Bluetooth is not supported.
Regards. -
Help me connect my 3 bluetooths to my new iPhone4S please.
Put the devices in pairing mode.
Read the Owner's manual for those devices to determine how to put them in pairing mode. -
The airplay on my i pad works with music and pictures but I cannot get it to work with safari and mirroring. Can someone help me to get things working? Thanks!
As an IT person, I can put my hands up to the same difficulty. Then on double clicking on Home button, find AirTV symbol amongst Music control
Solved my problem having spent hours looking for a complicated answer. Well done Apple for hiding it so well.
Brian -
I have an ipod classic with 4,500 plus songs....I cannot get my recent purchases to dowload to my ipod...it goes through the sync stage but never actually gets to my ipod....I am about ready to drop kick it all.....so fustrating....
Are you saying that iTunes isnt recognizing your phone?
-
I have a macbook pro and an ipad ... both have which regularly connected to the web through my airport for two years ... now, my ipad won't connect ... and the genius bar says my ipad is ok. Does anyone have any suggestions as to the cause and the cure?
Can your iPad connect to other Wi-Fi networks? If so, is it possible that you may have configured your AirPort to restrict access to the iPad by including the iPad's MAC address in the AirPort's Timed Access Control settings?
-
My Bluetooth speaker cuts out after connecting to the iphone 6. My ipone 4 did not have this
problem. Any advice?
Thank you !Or get a better speaker. The SportX3 is great and with the coupon code SPECIALX you get 40 bucks off.
-
ITunes keeps opening itself when I connect to my Bluetooth speaker
Every time I connect my computer to my Bluetooth speaker, iTunes automatically opens itself. I can't figure out what causes this, but it's annoying and I would like for it to stop. Does anyone know what causes this? Thanks in advance
http://forums.macrumors.com/showthread.php?t=1666895 but it might work to just disable iTunesHelper. If you do that you may have to start iTunes whever you want to sync a device instead of it autostarting.
-
HT1338 bluetooth says it has connected to my bluetooth speaker device yet nothing plays?
i have a logitech bluetooth speaker and my bluetooth on mac says it has connected yet nothing plays and when i click disconnect it doesnt disconnect, i think my bluetooth doesnt work on my mac, i dont think i have ever had a products that works with bluetooth, rubbish idea!
Post in the iPad forum.
-
Can anybody help me with this? Can't get my mobile data to work on my laptop while my iPhone is connected to it!
Not clear what you mean by "getting mobile data to work on my laptop." Do you mean using your phone as a mobile hotspot for your laptop? Did you enable Personal Hotspot in the phone settings. Is hotspot/tethering provisioned in your carrier data plan?
-
The phone has given me a 1015 error - unknown error has occured, during the firmwre comfirmation.
We have tired the tricks with holding the home button down for 10 secs etc, we have tried installing a number of different versions of itunes, but no joy.
We did do a backup of the phone before trying to sync it but can't re-install that either.
I have been told the only way to get the phone functional again is to re-jailbreak it, do a back up of that and try to udpate back to the apple IOS from there but the phone is not responding.
It turns on, and is in emergancy mode only, wehn I put hte sim in it's not recognising it, all it wants is to connect to itunes, which it wont do when you try.
I don't know what to do try next, at a dead end here.
I don't want a jail broken phone, I just want it to function like its meant to but at this stage I will settle for a phone that works at all.
Any suggestions,,,,,,,,, anyone??
Thanks for reading and considering my problem.Have latest version of iTunes installed and running. Also make sure you have internet access working and can access Apple websites. Also, make sure you don't have any entries in your hosts file referring to gs.apple.com....If your not sure about how to do that, go ahead and do the rest first. You can come back to that later.....Plug in phone. Put phone in DFU mode.(google put iphone in DFU mode for instructions) Then restore the phone in iTunes by highliting your device in the left column and click on the Restore button. The latest iOS version is 4.3.3. That's what iTunes will restore it to. When it's done restoring, iTunes will ask if you want to restore from a backup or setup as a new phone. I would use the Setup as a New Phone option. Once it's done, you should have a clean install of the iOS and an operating phone, as long as there are no hardware issues with it.
Maybe you are looking for
-
Custom infotype in recruitment
hi experts as nobody answering my query about pb60 i want to create a custome infotype in recruitment to maintain following data for an applicant and to fetch this data in "invitation for interview" in applicant planned activity. at least suggest me
-
How to get the value of the selected link
Hello, I have a page which displays the result of the VO in a table Region. One of the columns is made as a url . Now when the user selects the link, how can i capture the value (i.e. the link name). Thanks in advance. Kumar
-
Hi Guys, Would anybody suggest me how to monitor the DROP USER command? OS: AIX, Oracle: 11.2.0.2 CSM
-
Problem in calling rsh command Please help......
hi, I want to execute some commands on unix through java, for this i want to run my program simulataneously on differnt machines so that i get data to compare. I think i have to invoke the rsh command with the machine name for it but it is giving err
-
Lightroom 4 from US, is there a license issue?
I recently received a box unit of Lightroom 4 from US, is there a license issue if I install it in Singapore as I recide in Singapore. Are there any restrictions?