I cannot get my mac's original drive to connect when moved to optical bay
I have a 2010 MacBook Pro (6,2). I tried replacing the hard drive with an SSD and moving the orginal hard drive to the optical bay. When I do this, the SSD works but the HDD does not show up in any way, shape or form. When I put the optical drive in, it works with either the SSD or the HDD. I have tried this with two different optical bay HDD caddies. Does anyone have any suggestions?
After trying a different HDD adapter inteh optical bay, I discovered that I had damaged the ribbon cable that attaches the optical drive or its replacement to the motherboard. I am waiting for a replacement cable and will post when I install it to confirm that this was my issue.
Similar Messages
-
I cannot get my Mac Pro (Original) MacPro1,1 to boot with the 64 Bit kernel in 10.6.8 (this is a 2 x 3Dual-Core Intel Xeon machine).
Firmware = MP11.005C.B08 (EFI 1.2) 1.7f10 (SMC 1.1)
Will it not run the 64 bit kernel?
Is there a firmware upgrade to allow this?
Should I bother?
It won't boot with the Key 6 & 4 method.
or using Terminal command;
sudo systemsetup -setkernelbootarchitecture x86_64
Any suggestions?
Thanks in advance...
EricBecause it can't and doesn't have a 64-bit supported firmware.
UEFI (EFI64) was not finalized and adopted until very late 2007 and introduced in 2008, by Apple, Intel, other members of EFI Group and Unified EFI. The Mac Pro Mid-2010 was the first time though that 64-bit mode was the default.
Does it matter? not really. you can't install 48GB RAM anyway, while there are some improvements from 64-bit kernal.
Also can't boot Windows 7 64-bit DVD to install properly. But you can run Windows 64-bit kernel because you have a 64-bit Xeon.
Macs that use 64-bit kernel
64-bit kernel mode Snow Leopard
Booting with 32-bit or 64-bit kernel
Mac OS X- 64-bit kernel questions
http://macperformanceguide.com/SnowLeopard-64bit.html -
-1007f cannot get the Mac book air to reinstall, no drive. For disk and no connection
-1007f cannot get the Mac book air to reinstall, no drive. For disk and no connection please help!!
You can download the product from this link:
<Download Photoshop Elements products | 13, 12, 11, 10>
Your redemption code/Serial number will work with these downloaded products.
Make sure you download the correct version for your operating system - Windows or Apple MAC
Good luck. -
I have successfully changed my apple ID and password, but cannot get my Mac computer to change it on iCloud. I have accessed system preferences, iCloud and sign out. But now I do not know how to sign in using my new id and password. I would like iCloud to work on my Mac so that it will sync to my iPhone and iPad. I have installed all of the latest software. How do I change this account on my Mac?
Do you have your Mac backed up?
If not, you should use Time Machine to back up your Mac to an external hard drive just "in case".
But if all you did was change your existing ID, then deleting the Calendar infomation from the Mac when you sign out should not be an issue. Since it is the same Apple ID, it is the same iCloud account (just with a different name), so your Contacts, Calendars, etc. are stored in iCloud. When you sign back in, you will have the option to sync Contacts, Calendars, Notes, etc. with iCloud - it should already be checked. Just sign back in, and your iCloud info will re-download to your Mac.
I just tried this, and all of my stuff showed up when I signed back in. Notes took a couple of seconds to load once I opened them, but they are all there.
Note: If you are signing on with a brand new Apple ID, then nothing will be downloaded because it will be an entirely different iCloud account. But if it is the same Apple/iCloud/iTunes ID with just a new email, then it will all be restored.
Cheers,
GB -
Yosemite failed to install now i cannot get into mac pro
yosemite failed to install now i cannot get into mac pro MacBook is 2012 8g ram 750 g hard drive processor i'm not sure I tried disc utilities called for but it would not allow disc repair
Did you purchased the Full Perpetual License from Adobe for $149.00?, if so then what has happened is that you probably downloaded the Creative Cloud trial version which has now expired.
The license key for the perpetual version will not be accepted to activate the CC version.
Uninstall the existing Lightroom and then download the one available from the link below. The uninstall process will not affect your Catalog, Preferences or personal files but will just remove the application. Install the new download and you license key will be accepted.
Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 5.6
If this is not the situation you face then provide some more details. -
I downloaded Icloud somehow I changed my itunes account information and cannot get back to my original account that had a redeemed balance on it how can I get back to the original account?
Buy the songs that your friend put on the iPod that you liked. They had no right to give you the copyrighted music when they sold you the device.
tt2 -
I cannot get the mac book to automatically remember my e mail and passwords in hotmail, any ideas please
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro
http://www.apple.com/support/mail -
I cannot get my Mac to recognize my Sony DCR-HC21?
I cannot get my Mac to recognize my Sony DCR-HC21. Running a 13inch Macbook Pro 13inch mid 2010 model with Mac OS X Version 10.6.8.
Things I have tried:
1. Trying 3 separate Firewire cables (also tried two USB cables even though I know they wouldn't work, just wanted to see if the Mac would recognize the camera that way, no dice)
2. Turning the camera on then opening iMovie '11 (running version 9.0.4.)
3. Opening iMovie first then turning on the camera
4. Turning the camera on then opening Final Cut Pro 7
5. Opening Final Cut open first then turning on the camera
6. Tried 2-6 once with USB Stream on, and once with USB Steam off (USB Stream is a function on the camera)
7. Restarted the Mac then tried again
8. Reset my PRAM and NVRAM then tried again, still no dice.
My camera is set to the "Play/Edit mode" where it's supposed to be and the camera recognizes that it's connected to the computer by showing a little "DV" icon in the upper right hand corner, but iMovie, Final Cut, and the Mac itself won't recognize it. I have searched all over the internet, tried everything every forum has said and still nothing. Can anyone please help me?Is that model supported?
iMovie 11 - cameras supported:
http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
iMovie 9 - cameras supported:
http://support.apple.com/kb/HT3290?viewlocale=en_US
iMovie 8 Camcorders supported:
http://support.apple.com/kb/HT1014
Digital camera RAW formats supported by OS X Lion:
http://support.apple.com/kb/HT4757?viewlocale=en_US
Digital camera RAW formats supported by OS X Snow Leopard:
http://support.apple.com/kb/HT3825?viewlocale=en_US -
It connected the first day and I was able to upload some video; however, I pulled the USB out--there was a bad message--and I cannot get the mac to register that I plug it back in.
Have you downloaded everything that is on the camera? If so format the SD card on the camera (will erase everything on the card).
If you have not downloaded everything can you see stuff on the camera? If you have a card reader you could try putting the SD card in that and trying on the mini. If your mini has a SD card slot you could try that.
In any case format the card on the camera before taking more pics.
Next time be sure to eject the camera from the Mac properly and turn the camera off before disconnecting.
EDIT: You might also check the camera's USB Mode is set to PC. -
I CANNOT GET MY MAC OS X TO INSTALL UPDATES, I CANNOT GET MY MAC OS X TO INSTALL UPDATES
I CANNOT GET MY MAC OS X TO INSTALL UPDATES, I CANNOT GET MY MAC OS X TO INSTALL UPDATES.
Sorry about the caps!! My coworker had 14 updates and was trying to do them all at once. So she unchecked some and started updating a few @ a time and it worked, but my other coworker only has two updates and it looks like its installing. Then after she restarts her computer the updates still show. We.re all working on MAC OS X 10.6.8. Do you have any suggestions?
-
I recently upgraded and changed from o2 to EE, however although my number has transferred i cannot deactivate my imessage to receive to my transferred number and cannot get messages. To original number? How do i do this.
That's because apps are DRM protected & tied to the account used to originally obtain them. They cannot be transferred to another iTunes account. You can contact iTunes support, explain the situation, and request they add these apps to the download queue of your new account:
http://www.apple.com/support/itunes/contact.html -
I changed my server at the end of May & all worked well until the past week end since when I am getting a message saying that I cannot get email because the server will not connect - although it does. It also claims that it was last backed up on Friday last despite having had several emails since Friday. What has happened & can I get email back to normal?
Hello Stern snapper
If you are having issues with receiving email on your iPad, then check out the article below to troubleshoot the issue. You may just need to remove the email account and add it back in.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Regards,
-Norm G. -
I cannot get my iPod to sync to iTunes. When I try to sync it, a box appears which reads: "An unknown error occurred (13019)."
Have a look at the More Like This Section on the right...
-
why am i getting the message cannot get mail or that i am not connected to the internet what settings do i need to be on
WIFi needs to enabled and you need to be connected to a network. Alternatively, you need Cellular Data to be "on". (Settings>General>Network). But it propably is a problem with your router (at least, it often is with me), provided you are using your private router. Try schutting it off and turning it on again. This usually sorts problems like this out.
-
I cannot get my i mac to boot after I turn on. I get a bright white screen followed by an icon with a ? in the middle of it.
I also hear the some knocking in the computer as the HD rotates???You will need to reinstall OS X.
Maybe you are looking for
-
Updated to 10.8.5 and now app store won't work?
I have just updated my Mac 10 version 10.8.5 and now it is saying that the App Store won't work with this version. Itunes also won't open as this obviously hasn't updated properly either. Has anyone else had this problem? I don't seem to be able to r
-
HP COLOR LASERJET Pro MFP M176n
Hello Is the printer HP COLOR LASERJET Pro MFP M176n PCL5/PCL6 compliant? I searched in the HP website and it says PCLm/PCLmS in one link and PCL 3 GUI in another link. Also advise what is PCLm/PCLmS? PCL 3 GUI : http://h10025.www1.hp.com/ewfrf/wc/do
-
Hi Experts, Im new in this forum and please tell me if Im in the wrong Forum. I think the problem Im facing is a data cache one. The Scenario is a proxy -> Web Sevice. Synchronous. The Symptoms are: problems in the ESR. when im testing my scenario I
-
Client moved home locations and brought NAS200. Tried to hook it up to new router and it would not show on the router client list. Router is 168.192.1.1 and mask 255.255.255.0. Tried resetting the NAS with 2, 10 and 30 second resets but no change.
-
Safari will not close even when I use command+Q. I cannot restart my computer because Safari is still open