I cannot get my monica minolta 7030 ip-011 to print

I have just bought a macbook pro with os x 10.6.6, and trying to connect it to the network printer (konica minolta 7030)
It's not a post script printer but a ip-011 printer. How do I get it to work.

Similar Messages

I cannot get my HP Officejet 6500A Plus 710N to print in color. I have reinstalled the drivers..

I cannot get my HP Officejet 6500A Plus 710N to print in color. I have reinstalled the drivers. It used to print in color and just stopped. I think it may be a settings issue? I have checked the ink levels and they are all fine. When I print a diagnostic report on print qualify, the black prints well, but there is no color printing.

Okay, I had the same problem. It's most likely your printhead. All you have to due is clean it.
Note: I was sceptical of this approach but can fully attest to it's sound results as it restored my printer back to full functionality. Prior to this the printer only would print Black ink.
The print head is the carriage that holds all of your ink cartridges in the printer. On the 6500A it's super easy to remove. Opent your lid like your changing your ink cartridges. Remove all of your ink cartridges. Once they're out. There is a lever on the left side of the carrier that holdes your ink cartridges. Lift it up and the print head comes right out. Net take your print head to the sink and run it under hot water aiming towards the the four cirles were the ink flows into. Keep running it under the hot water until it is coming out clear. It's okay to run it under the bottom part too infact you'll need to inorder to get it completely rinsed out. Also don't touch the computer metal strips with your hand thought you can run water over them. Once your done rinsing use a blow dryer or a can of compressed air (thats what I did) to dry every thing out. I was able to get everything dry in about 5 minutes or so. Let it sit for a few minutes and check it again for water. I recommend moving it around to get full exposure to insure it is dry. Also if you use a hair dryer try to put it on a cold setting since there ar rubber grommets the surrount the inlet ink ports you wouldn't want to melt them with the hot air etc.. Like I said I used a can of compressed air. It's important to use a quick method of drying as mentioned otherwise mineral particles could become deposited on the unit. This won't happen with the methods as I've described because the molecules won't be able to bond since your blowint them off. Oh yeah, you'll want to place a clean peice of paper down as your blowing because at first you'll end up with a few black jet marks as your blowing. Also don't wear your favorite white shirt lol.
Okay once it's dry replace the print head carriage back in push the lever down install the ink cartridges. Close the lid then unplug the printer. Wait 5 seconds plug it back in then it will reboot and start its set up procedure kind of like whet you first bought the printer except you won't have to change any of your network or setup setting since they are saved in memory. Also be patient about the set up procedure it seemed very slow for me. Once it finishes you will be prompted to run the printer alignment process. Run the alignment process and you should be all good. If not at least you gave it a shot. If this doesn't work your going to have to pay $60 for a new printer head. Which is not that big of a deal but hey if you can fix it for free why not. If you do decide to buy a new printer head you might find deals online or ebay just make sure it's an Genuine HP print head. And lol use the Genuine HP ink cartridges. Finally make sure you print at least on colored page per month to make sure the ink doesn't clog up in the future.
Remember this suggestion is after you have run the HP clean ink cartridge procedure twice. Sometimes the clean procedure will correct the problem first. Also there is video I watched on YouTube about this just search for "Clean HP 6500 print head. Hope that helps
Once it's all dry just reinstall the printer head carriage

Cannot get my iMac OSX 10.5.2 to print on canon mf4412

Hi All,
I cannot get my iMac OSX 10.5.2 to connect and print on canon mf4412. I installed UFRII_V224_MacOSX_uk_EN driver but to no avail. iMac doesn't recongnize the printer and throws client connect error. I tried the printer on Win XP & works fine.
Can somebody please help me resolve this issue?
Thanks!

I'm having the exact same problem. Have downloaded the drivers from both the singapore and uk websites of canon and yet it doesnt print.

We cannot get our iPad to AirPrint to hp 6700 printer even though the printer is recognised.

We are unable to air print to our hp 6700 printer. Can anyone help?

Is it an AirPrint printer?
iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
iPad Power: How to Print
http://www.macworld.com/article/1160312/ipad_printing.html
Check out these print apps for the iPad.
Print Utility for iPad ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
Print Agent Pro for iPad ($5.99) http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8 Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
FingerPrint turns any printer into an AirPrint printer
http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
 Cheers, Tom

Installed reader many times. Still cannot get pdf files. Cannot print statements or bills. Help!

Installed reader software numerous times. Still cannot get pdf files to open so I can print bank statements and bills. Help!

When you say you cannot print, do you see any error? Please use Print button from Reader toolbar instead of Safari > Print.
What is your Safari version? You can find it from Safari > About Safari
Can you please verify Safari > Help > Installed Plugins : Do you see Adobe Acrobat NPAPI Plug-in, Version 11.0.06?
Thank You

Adobe Cloud is installed on my desktop and one laptop computer. Upon noticing updates were available yesterday, I successfully installed them on my laptop. Today, I cannot get Abobe Cloud to open on my desktop.

Adobe Cloud is installed on my desktop and one laptop computer. Upon noticing updates were available yesterday, I successfully installed them on my laptop. Today, I cannot get Abobe Cloud to open on my desktop.

We don't know what Apple plans on doing to change this (and it may not be just Apple but more likely the publishers, since Apple would, of course, do whatever it could to maximize sales/profits). Right now you can only read Apple books on mobile devices. Sure, buy them from Amazon if you want to read them on the computer. We don't work for Apple so we're pretty impartial on this kind of advice.
You might also see what your library can offer. My wife can browse the county library from her iPhone, borrow e-versions, and read books on it too. Free!

HT1296 I already have an itunes account on my laptop but have been setup on a mac and have songs that have not been purchased from the itunes store, I cannot get the songs from my iPhone onto my itunes account on the mac. how can I do this?

I already have an itunes account on my laptop but have been setup on a mac and have songs that have not been purchased from the itunes store, I cannot get the songs from my iPhone onto my itunes account on the mac. how can I do this?

You copy them from your old computer or your backup copy of your old computer.
The iphone is not a backup/storage device.

I use a Mac, new to lightroom, I purchased the software, and now I cannot get into my develop module because it is telling me that I need to renew my membership ? Lost !!! lost in a dark cold cave of lightroom someone please help me !!

I cannot get into my develop module on lightroom, it is telling me to "please renew my membershipto reactivate the develop module" I do not understand. I bought the software must I pay a membership as well ? Also I do not want to use lightroom mobile and it is trying to sync my photos. I use a MAC

Did you purchased the Full Perpetual License from Adobe for $149.00?, if so then what has happened is that you probably downloaded the Creative Cloud trial version which has now expired.
The license key for the perpetual version will not be accepted to activate the CC version.
Uninstall the existing Lightroom and then download the one available from the link below. The uninstall process will not affect your Catalog, Preferences or personal files but will just remove the application. Install the new download and you license key will be accepted.
Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 5.6
If this is not the situation you face then provide some more details.

One of my apps has recently updated. Now I cannot get into it . How do I get my data back?

One of my apps has recently updated. Now I cannot get into it. I am afraid if I delete it , it will lose its data. Help.

First check to see if it's on the multitasking list and if so, force close it: double-tap the home button, locate the app in question, swipe up on the image above the app icon then tap the home button again.
If not, try restoring your most recent backup. It should include the app data. This explains how to restore an iCloud backup: iCloud: Restore or set up your iOS device from iCloud.

I am transfering my stuff from my lap top to my desk top (both Mac). I cannot get my CS4 to open. It gives me a 150:30 error, licencing thing. I have no idea what to do and after hours of searching none of what I found helps. I don't know anything about t

Sorry didn't know that the first step was just supposed to be "subject".
So here it is again.
"I am transfering my stuff from my lap top to my desk top (both Mac). I cannot get my CS4 to open. It gives me a 150:30 error, licencing thing. I have no idea what to do and after hours of searching none of what I found helps. I don't know anything about this stuff so please don't answer with "maybe this willl work, or maybe that." I need a real answer please and I cannot find a way to actually contact Adobe. I also don't have a disk drive on this Mac. Thanks"
Also please feel free to e-mail the answer because I hate looking for these answers online. It takes me forever to find this section. Not that I have even even gotten a real answer.
[email protected]

Hi Sonia,
While transferring Adobe from laptop to PC the licensing files got corrupt and the right way to use Adobe Applications is to install first as transferring from a different machine can give you problems.
You can try steps from this article if that helps otherwise you have to reinstall and manually delete some files , everything is mentioned.
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html
You can download CS4 from here:
Download CS4 products

TS1702 I cannot get the keyboard to come up on the ipad mini when in the citrix receiver. Has anyone ran into this and do you know how to fix it?

I cannot get the keyboard to come up on the ipad mini when in the citrix receiver. Has anyone ran into this and do you know how to fix it?

I am not familiar with Citrix Reciever but is it possible it is open or being used in another open app?
Try quitting all apps then try again.
Quit all apps: Double tap the Home button and swipe the app preview page up for each open app

I have a packardbell laptop with photoshop elements 8 installed from new. I have used it on several occasions but I cannot get it to run now. When I open a photo using elements the Adobe box pops up saying that the programme has unexpectedley quit? can a

I have a packardbell laptop with photoshop elements 8 installed from new. I have used it on several occasions but I cannot get it to run now. When I open a photo using elements the Adobe box pops up saying that the programme has unexpectedley quit? can anyone help me please as I have several photos to edit before the end of this month. Many thanks for any help

The "restore disk" is built into the Mac. See About Recovery.
Need more specifics about what error messages you got while installing Adobe Flash.
However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
Click the Try something new! link at the bottom of the YouTube page.
I don't know about the sound issue. Might be hardware as you think. Try other headphones to check.

Cannot get or send mail using Apple Mail on iPhone and iPad

Everyone in my household cannot get or send mail on their Apple Mail for iPad and iPhone. We all get the same message: "The user name or password for [account] is incorrect." This just started happening yesterday afternoon. No problems before that. I called my hosting company and Apple, and both blamed the other. My Apple system is always updated, so I have the latest version of Maverick. Had no problems with it up until now.
However, I awoke this morning to find downloaded emails in the same program, but when I go to "get mail," it says the same thing, and still won't allow me to send or receive.
Here's the kicker. I also use Gmail with the exact same accounts (yes, I need both since Apple Mail does things that Gmail doesn't, and vice versa). No problem! I get all my emails and can send with no problem. So, my hosting company claims it can't be them (makes sense). It only happens using Apple Mail, and I have several email addresses. None of them work (other than the strange phenomena of suddenly getting some of them downloaded for no apparent reason).
What do I do from here? I've changed passwords, deleted and tried to set up my emails, only to get the message that they probably will not work. And they don't. I have shut down and restarted my iPad and iPhone, to no avail.
Thank god for my Gmail account, or my business would be closed.
Again, this is happening on four devices in my home: 2 iPads and 2 iPhones.

I have a comcast account I use on my phone and use it for receiving and sending mail. When you look at the account in settings, you need to check each of these
incoming mail server: mail.comcast.net
username: the part of your email address before the @
password: your password
outgoing mail server: smtp.comcast.net
Under Advanced
Use SSL: On
Authentication: Password
Server Port: 995
If you cannot make it work from changing settings in the account, delete the account and start over. Use the "Other" setting when starting the account. It is a POP3 account and make the entries I gave you. Once you do that, it should check the entries and validate the account. You shouldn't have any trouble from there. Those settings will work from either the iPhone on cell, or wireless. Mine will even work when I'm at home on my wireless there, which is on the Comcast network.
Hope that helps you.

Cannot get maile connection to server failed

followed the instructions for icloud set up in apple support for ipad and iphone even deleted the account and then set the account up with the correct ID and password. I do use a different ID than my apple ID for my icloud account. I use my me.com email address. I can get into the cloud on my pc and I can send and recieve email when I log into my icloud account but this fails to work on my ipad and iphone. Attempts to seen or get email on these devices when on a wifi network end up with the message "cannot get mail connection to server failed"
lee

Hi HLSdoc,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iCloud: Troubleshooting iCloud Mail
http://support.apple.com/kb/ts4002
Issues sending or receiving mail on iPhone, iPad, or iPod touch
Best of luck,
Mario

Cannot Get Mail Connection to Server Failed

Ok, I am not a very good with setting things up but I have the itouch 16GB, I have managed to set up my email and am receiving new ones but I can not connect when I am away from my home, everytime I try to connect I get the following message, *Cannot get mail,The connection to the server "pop3.live.com" failed.* Can anyone help as to what I have done wrong or what I need to do to make this work. Many thanks

Tina,
You need a good WiFi connection first. You can get a WiFi signal, tell your touch to connect to the network (which it does) and still not be able to do anything - like check e-mail.
I've noticed that a lot of free hotspots here in the States make you go through a web page to "log on" to their networks. Even if it is free, you still have to go through this system.
Next time this happens, open Safari and touch one of your bookmarked pages. Chances are the network log on screen will pop up. Do whatever it asks, and that network will release your log on to begin working.

I cannot get my monica minolta 7030 ip-011 to print

Similar Messages

Maybe you are looking for