I cannot get my printer to print HP Photosmart all in One D100A

i cannot get anything to print

Hello! Could you please provide more information regarding the issue, such as any errors or the circumstances in which are you unable to perform this action? Any additional information will be helpful in resolving your issue. Thanks!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

Similar Messages

Can't setup wireless printing : HP4385 Photosmart All-In-One Printer / Linksys Router/Mac OS 10.5

I am attempting to set up my printer to operate wirelessly. I have the computer and printer connected via USB for the setup.
I have :
PRINTER : HP All In One Photosmart C4385
ROUTER : Linksys wireless B (WPA security)
COMPUTER : Macbook Mac OS 10.5.8 notebook.
I've downloaded the correct HP software.
On the printer, the wireless radio is set to "on"
PROBLEM : Using the HP Setup Assistant, I select my Wi-Fi network, and get an error message " the selected Wi-Fi network is not within reach of the device"
The printer and router are in the same room with nothing blocking them.
Print out of HP Network Configuration Page :
General Information
Network Status : Offline
Active Connection Type : None
URL : http://0.0.0.0.0
Firmware Revision : WPxxFN0723AR
Hostname : HP8766D2
Serial Number: CN7CDD51P80509
Admin Password : Not Set
802.11 Wireless
Hardware Address (Mac) : 001e0b8766d2
Status : Disconnected
mDNS
Status : Enabled
Service Name : Photosmart C4380 series [8766D2]
SLP
Status : Enabled
Any help greatly appreciated !

Print a WIreless Network Test from the front of the printer. It will self-test the printer's radio.
Can you give me the exact model number of your router? If it is a 802.11b router, it may be time for a new one. If it is, are you sure you are using WPA and not WEP?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Can not connect printer HP photosmart all in one 6510 with my windows 7 home edition PC

Stuck! Please help. I'vre uninstalled and reinstalled several times: restore PC to previous working time; checked all passwords and IP addresses. Do wireless connection (home group) network - says it can't connect up by wireless, evenb though it says printer is connected up to internet as is PC. USB connection it jams on the drawing of the ethernet connection. PC does not accept updates-they all fail. Last week I had no such problems. Rolfus
This question was solved.
View Solution.

Hi Rolfus,
Welcome to the HP Forums!
I understand that your HP Photosmart 6510 will not print with your Windows 7 PC.
I would suggest going through this guide. Printer Does Not Maintain Wireless Connection.
Hope this helps, and have a good day.
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Cannot get correct print layout for multiple page/booklet printing

In trying to print a pdf file that is landscape, 2 pages per sheet, booklet format, I cannot get the print preview to show the correct layout. I have tried all the options in the print menu, but either I get the pages in the incorrect order or I get what should be on the right side on the left side and vice versa. Of course, there is NO help in the Adobe knowledge base. Has anyone else experienced this problem. Is there a fix? Additionally, Adobe wants me to pay $39 for assistance that they will not guarantee they can fix. How crazy is that!
Thanks for your response.

I highly recommend Quite Imposing. It can create nearly any booklet you want as a pdf file. Then you will have no problem being sure it is what you want before you print to paper.
http://www.quite.com

I have requested and accepted the most current Firefox program updates with my windows vista system. They are not registering but I am told they are downloaded. Then I cannot get the printer option to work with any version of firefox. in English

I have taken the firefox updates when offered to 4.4. I have the browser as an aside to Internet Explorer 9 as a backup browser. When I use Firefox I am being told my system is not up to date and I need a newer version. I download the version and keep getting told I am not current with firefox. When Firefox DOES work I cannot get any printer icon or settings to enable and allow the printing of a page. I have to use IE9 to get the printer to work. Using eBay I cannot get the uploading of pictures from my computer to consistently operate even though I use small JPG files under 500KB.

There are a lot of IntelliTXT like ''ad'' pop-ups possible.
If your current Adblock Plus filter settings aren't blocking some pop-ups then it is best to take this to the Adblock Plus forum.
* https://adblockplus.org/forum/
* http://en.wikipedia.org/wiki/Category:Internet_advertising_services_and_affiliate_networks
* http://en.wikipedia.org/wiki/IntelliTXT

I am using AI CS2 on an eMac and cannot get the print menu options to recognize the print features l

I am using AI CS2 on an eMac and cannot get the print menu options to recognize the print features like? I need to use mirror feature and high quality printing and it will not work.

jdanek
It is an eMac. I have a corrupted font book. How can I fix/re-install/or download a new font book app? Most fonts that were in it work, some do not, but I cannot open it nor can I install fonts into it. This happened after the eMac OS was upgraded from 10.3.9 to 10.4.11 and AI was upgraded to CS2
Kind regards,
Steve Mosher
Village Graphics LLC
438 Troy Loop
The Villages, FL 32162
352-409-6853
[email protected]

Can my hp photosmart all-in-one 7200 printer connect to ipad 2 via bluetooth?

I have a hp photosmart all-in-one 7200 printer with a hp blue tooth dongle. It works well with my cameras, but I cannot get my ipad 2 to recognize the printer.

Hi,
Printing via Bluetooth from an iPad is not possible due to iOS limitations, as Apple did not include the Bluetooth printing protocol in the iOS.
If your printer is HP Photosmart C7200, you may use the HP ePrint Home & Biz App to print from your iPad through your home network
However for the Officejet 7200 your only option is to look for any available 3rd party printing solution from the App Store.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

After upgrading to mavericks how can I connect my HP PSC 2510 photosmart all-in-one printer to my mac?

After I upgraded my macbook air to mavericks, my HP PSC 2510 photosmart all-in-one printer doesn't connect to my macbook air. When I try to launch the all-in-one installer from the HP CD that came with the printer, I get a message saying it cannot open because powerPC is not supported. The HP site has not been helpful in resolving this issue. My understanding is I first must connect the printer to the wireless system (I use airport extreme) before using airplay for printer software upgrade.

Your suggestion is helpful, but after some digging on the HP site I found a detailed solution to my problem. The link is: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01749025&tmp_task=setupCate gory&cc=us&dlc=en&jumpid=reg_r1002_usen_c-001_title_r0001&lc=en&product=303770

How can I print to hp photosmart all in one 7280 from ipad

How can I print to hp photosmart all in one 7280 from ipad
This question was solved.
View Solution.

Hi,
Although the C7280 is not AirPrint enabled, you may still print through the local network using the HP ePrint mobile app.
you may find the steps to get and use the app in the following document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02775166&cc=us&dlc=en&lc=en&product=3204785&tmp...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP PHOTOSMART ALL-IN-ONE 5510 WONT PRINT AFTER GOING TO SLEEP MODE

My printer model:
HP PHOTOSMART ALL-IN-ONE 5510 B111A
Problem:
Printer goes to sleep mode. After 25-30 minutes the wireless connection between the PC and the printer breaks. Blue Wireless light is on even at the sleep mode and I can see that the printer is connected to my router and there is internet connection. HP Print and Scan Doctor sees the printer but I cannot awake the printer unless I restart it.
What I have tried so far:
I have tried all the solutions hp.com offered including; reinstalling driver, updating printer software, setting static IP to printer, setting static DNS servers, using HP Print and Scan Doctor.
I have seen people asked about this question before and there was no solution. I really need HP help!
This question was solved.
View Solution.

Let’s try this. Verify in the printer that 'Auto Off' is disabled. Set a static IP in the printer outside the DHCP range of the router. Use a fixed wireless channel like 1,6 or 11, never 'auto', try channel 1 first then the rest. Set router to 20Mhz only, or 145Mbps depending on router. Always use WPA2-AES encryption. Power off both. Power on router wait 3 mins. Power on printer and verify it reconnects to router. Now try.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Photosmart all i one 7520 Printing problems the wrong scale the printout

I will print covers for DVD cases. Have done it before from two different programs to my previous photosmart printer without problems. Now since I change the Photosmart All in One 7520 will be reduced format in both height and width. A degradation of the picture takes place.

Hello there @AgnetaL
Welcome to the HP Forums!
I understand you are facing some issues when printing DVD cases from your Photosmart 7520.
I would recommend checking the printers specifications, as this unit may support different sizes, paper types, etc than the previous printer did.
Here is the link for you to get to the: Printer Specifications for the HP Photosmart 7520 e-All-in-One Printer Series
If there is still an issue, let me know which programs you have tried printing from, which paper size and type you are using, and which troubleshooting steps you have tried already.
Have a great Monday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Printing issue wirlesse printing on c5100 all in one

Hello
I have issues printing over my wirless network using a mac and printing on C5100 all in one. When the printer is running and I start up my mac (running 10.8.3) I can print the windows documents. However if the printer is switched on after the mac is switched on it can not find the printer.
I reinstalled the all the drivers on the mac and set a fixrd ip adress for the printer but both doesnt work. same issue with a second mac laptop also running 10.8.3
Anybody an idea what this could be?
Tahnks in advance

I am thinking the router does not support Bonjour (otherwise known as mDNS). Macs need this service to be able to find the printer.
Get into the router settings and look for Bonjour or mDNS and make sure it is enabled. Also, make sure the multicasting is enabled in the router.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

3210 Photosmart all-in-one printer

I have a 3210 photosmart all-in-one printer. I've used this printer for 3yrs now with out a problem. I was having problems with computer being slow so I tried a fix and that led to while reloading the disc that came with printer it had a"Fatal Error". A little upset yes. Starting thinking about and I remembered when I bought my new computer I loaded all the stuff I had on my Sony Viao coputer to a laptop and transfered it to the new Dell XPS. I was hoping everything would work on the new Dell. Pretty much everthing worked. I had a online company clean my computer and tune up to be fast again. It became fast again oh yeah! Well the problem reared it ugly head the minute I push the scan button on the printer. It show an error on the little screen (no scan options)Refer to device documention to toubleshoot.I did all that stuff and I'm at a point now I've downloaded from HP an updated patch to run vista. what I realize now is when I transfered from Sony to the Dell, The Sony was running Windows 98 and my new Dell run Vista Home Premium. So as it was everything worked until now. Can anyone help me fix this?

A lot of this computer stuff is new to me so please forgive me if it takes me awhile to run it through my brain a few times to try to understand how to use the information. Maybe I could explain where my head is now. I have a DEll XPS 420 and the software that came with it had HP printer stuff on it. Just last week I had a company clean my computer of stuff that was causing it to run and start very slow . They said I had over 700 errors in the registry include some viruses. I did find the problem till a day after when I pushed the scan button on the printer.)No Scan Options) showed up on the little screen. I call that company back an explained my problem and they took control of my computer and tried to fix it. The solution they came up with was an I-con on my desk top that when you click on it it bring the paint program up and use that or he have a much more involved procedure to try to restore it. Now I've had a few days to ponder and it comes to mind that my old Sony was running Window 98 and my Dell is using Vista home premium. My Son used his laptop downloaded everything from Sony and then downloaded everything on to the Dell. my gut tells me that the software that came with the printer when i bought the Sony it is for 98,Me,2000,XP . When I uninstalled HP and went to web site downloaded latest version for my HP 3210v all-in-one printer it come up with a fatal error. This is pretty much where I at and any help I can get I would be thankful for Mike

HT1338 I have updated my new MacBook Pro for HP Photosmart All-in-One, but it still will not scan - it will print, but will not scan. How can I fix this?

I have installed the updates for my HP Photosmart All-in-One c309a. It prints, but will not scan. Tells me to update - I did that, but still won't scan. Any suggestions to make the scanner work?
This all worked perfectly with my old 2008 MacBook Pro.

Have you tried scanning from Image Capture or Preview?
A current driver is shown to be available for Mavericks (auto-downloaded):
http://support.apple.com/kb/ht3669#HP
But many people have found that manufacturer scanning control software doesn't work. They have to use the Apple-provided software.

Can HP Photosmart All-in-One C6180 be made to recognize iPad 2 AirPrint so it can print to HP?

Can HP Photosmart All-in-One C6180 be made to recognize iPad 2 AirPrint so it can print to HP?

Hi,
I can' see it in this list (updated last week). Please check it yourself again.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I cannot get my printer to print HP Photosmart all in One D100A

Similar Messages

Maybe you are looking for