I cannot get my text to flow to following pages once I insert it.

The chapter text box shows a plus sign in a small box at the bottom-center of the text box. I am a complete a neophyte. What do I do to make this all work. I need details. I am using the black and white template (the first one). My requirements are very simple as I'm creating a kids chapter book (4,000 words, 18 B/W illustrations). Thanks.

I still have a separate issue with the second page (right-side page) on the chapter template I chose. It used to have the b/w flower image, which I deleted.
Rememeber you do not have flowing text boxes on that  page. You  have the text box on the left. In place of teh image, you can insert another simple text box, drag it to size on the right.
Also remember it does not flow so you need to contrive and text to fit that box. OR you can  drop and image of your own on that side of the  page and if its not same size as the original placeholder "flower" image, add the text  box above or below to use as you can.
Before you get too deep into your project , let me add some suggestions to avoid confusion later.
if you have not already organised your books systems, this is mine:-
I have a folder in the "Documents"   current in use is named "iBooks 2014"  inside this I add a folder for each book I work on given the  name of the book. Inside that folder I save the "mybook.iba"  file, any duplicates or copies or variations of teh  book until its finalised and they can be dumped. I also save  teh exported book files and all screen shots and cover page images.   Everything related to the book is in one folder and not scattered all the hard drive.
I suggest you open another different template and remember that where you see any image,  you can drag and drop  your own image on top ( drop when you see the old photo get a blue line around it)  use a spare  book file to test things before you mess up your  project.

Similar Messages

  • How do I get the text to flow throughout more then one page.

    Hello,
    I am currently using LiveCycke Designer to create a scholarship for my company. I created fields for the form and I would like to insert a text to describe the scholarship. When I insert the text, it doesn't flow onto the next page. I've tried creating a subform and clicking "flowed" and "allow page breaks within content". I also clicked auto-fit for the height, but it just makes a line. For the text box, I've clicked "Expand to fit on the height". It is also a dynamic XML Form. Is there anything else I should be doing?
    I could always send the file to someone to see if they can figure it out.
    Thank you,
    Natalie

    Thank you so much !
    but the link doesn't seem to work. It says that the URL is not in the correct format for an Acrobat.com document link.
    Natalie
    Date: Wed, 12 May 2010 07:53:12 -0600
    From: [email protected]
    To: [email protected]
    Subject: How do I get the text to flow throughout more then one page.
    Here is the corrected form..Even you you set the Subform type to "Flowed" to the subform where the Text box resides, you did not set the Page1 to Flowed (which is the key)..But when I make the Page1 type to "Flowed", all your fields above the Scholrship text boxes' Subform will go one below another.. To fix this, first I have select all the fields and wrap them into a subform and then set the Page1 to Flowed..
    https://acrobat.com/#d=XQ1yfV8fCk85M7sRLD*-gg
    Thanks
    Srini
    >

  • How do I get text to flow from one page to the next in Pages 5?

    How do I get text to flow from one page to the next in Pages 5 with the Maverick system?

    What may be overlooked in Pages v5 is the notion of combining Text Boxes via the Menu > View > Show Arrange Tools. When you select two Text Boxes, an extra panel unfolds at the bottom of the Arrange Tools window. Uncheck one Text Box and this panel abruptly disappears.
    One can achieve text flow effects between Text Boxes differently based on how one positions the Text Box overlap, and choice of effect above. Though not the accustomed flow found in Pages ’09 v4.3, flow does occur. Consider the possibilities of combining a Shape and a Text box to cut an irregular Text box.
    If I create two Text Boxes and position them side by side with outline touching and choose Unite, this creates one larger Text Box and text flows across and down. On the otherhand, if I overlap the upper left corner of a lower Text Box over one above and to the left, then choose Union, pasted text fills the first Text Box and then flows across and down into the other box. Here is a Union example:
    Intersect will leave a small Text Box where the two overlap, so not much value there. Subtract will cut a chunk out of one Text Box that is the size of the overlapping piece of the second Text Box:
    And Intersect will leave an island in the center where the two Text Box overlap, with flow jumping over this bridge.
    Clearly, this is not what we were accustomed to in the past, but with imagination, style, and layout tuning, it does offer alternative Text Box creativity and layout. Of course, there is the option of simply returning to the previous Pages version for true Text Box linking that most will want to use.

  • Cannot get subtotal text in ALV

    Hi all,
    I cannot get the text for my subtotal. Anyone have any idea?
    & Report  ABC&
    REPORT  ABC.
    after getting data*
      SORT lt_manpower by gsber landx50 bukrs.
      PERFORM set_header.
      PERFORM set_fieldcatalog USING alv_fieldcat.
      alv_layout-colwidth_optimize = 'X'.
      alv_layout-zebra = 'X'.
    alv_layout-cell_merge = 'X'.
    alv_layout-get_selinfos = 'X'.
      alv_layout-no_totalline = 'X'.
      PERFORM data_sort USING alv_sort.
      PERFORM data_get_events.
      PERFORM data_subtotal_text USING ls_manpower
                                          alv_subtot_text .
      PERFORM set_alv.
    *&      Form  data_get_events
          text
    FORM data_get_events.
      CONSTANTS: lc_formname_top_of_page TYPE slis_formname VALUE 'TOP_OF_PAGE'.
      CONSTANTS: c_formname_subtotal_text TYPE slis_formname VALUE 'SUBTOTAL_TEXT'.
      DATA ls_event TYPE slis_alv_event.
      CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
        EXPORTING
          I_LIST_TYPE     = 0
        IMPORTING
          ET_EVENTS       = lt_event
        EXCEPTIONS
          LIST_TYPE_WRONG = 1
          OTHERS          = 2.
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    Subtotal
      READ TABLE lt_event INTO ls_event WITH KEY name = slis_ev_subtotal_text.
      IF sy-subrc = 0.
        MOVE c_formname_subtotal_text to ls_event-form.
        MODIFY lt_event FROM ls_event INDEX sy-tabix.
      ENDIF.
    ENDFORM.                    "data_get_events
    *&      Form  data_subtotal_text
          text
         -->VALUE(LT_MANPOWER)  text
         -->LS_SUBTOT_TEXT      text
    FORM data_subtotal_text USING lt_total TYPE ty_manpower_struct
                            ls_subtot_text TYPE slis_subtot_text.
    Division total
      IF ls_subtot_text-criteria = 'GSBER'.
        ls_subtot_text-display_text_for_subtotal = 'Division total'.
      ENDIF.
    Country total
      IF ls_subtot_text-criteria = 'LANDX50'.
        ls_subtot_text-display_text_for_subtotal = 'Country total'.
      ENDIF.
    Company Code total
      IF ls_subtot_text-criteria = 'BUKRS'.
        ls_subtot_text-display_text_for_subtotal = 'Company Code total'.
      ENDIF.
    ls_subtot_text-display_text_for_subtotal = 'Sub total text'.
    ENDFORM.                    "data_subtotal_text
    *&      Form  set_alv
          text
    FORM set_alv.
      DATA lv_repid TYPE syrepid.
      lv_repid = sy-repid.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          i_callback_program     = lv_repid
          i_callback_top_of_page = 'ALV_TOP_OF_PAGE'
               is_layout              = alv_layout
          it_fieldcat            = alv_fieldcat
          it_sort                = alv_sort
          it_events              = lt_event
         i_default              = 'X'
         i_save                 = 'A'
        TABLES
          t_outtab               = lt_manpower
        EXCEPTIONS
          program_error          = 1
          OTHERS                 = 2.
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    "set_alv
    *&      Form  alv_top_of_page
          text
    FORM alv_top_of_page.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
        EXPORTING
          IT_LIST_COMMENTARY       = alv_top_of_page.
    ENDFORM.                    "alv_top_of_page
    Edited by: Siong Chao on Oct 18, 2011 9:39 AM
    Edited by: Siong Chao on Oct 18, 2011 9:40 AM

    Hi Keshav,
    The following is my set_fieldcatalog.
    FORM set_fieldcatalog using alv_fieldcat TYPE slis_t_fieldcat_alv. As you can see, the 3 fields I wanted to display the subtotal, I did set the do_sum = 'X'. Anything else I am missing?
      DATA ls_fieldcat TYPE slis_fieldcat_alv.
    employee number
      ls_fieldcat-fieldname     = 'PERNR'.
      ls_fieldcat-tabname       = 'LT_MANPOWER'.
      ls_fieldcat-ref_fieldname = 'PERNR'.
      ls_fieldcat-ref_tabname   = 'P0000'.
      ls_fieldcat-key           = 'X'.
      APPEND ls_fieldcat TO alv_fieldcat.
      CLEAR ls_fieldcat.
    employee name
      ls_fieldcat-fieldname     = 'CNAME'.
      ls_fieldcat-tabname       = 'LT_MANPOWER'.
      ls_fieldcat-ref_fieldname = 'CNAME'.
      ls_fieldcat-ref_tabname   = 'P0002'.
      ls_fieldcat-key           = ''.
      APPEND ls_fieldcat TO alv_fieldcat.
      CLEAR ls_fieldcat.
    gender
      ls_fieldcat-fieldname     = 'GESCH'.
      ls_fieldcat-tabname       = 'LT_MANPOWER'.
      ls_fieldcat-ref_fieldname = 'GESCH'.
      ls_fieldcat-ref_tabname   = 'P0002'.
      ls_fieldcat-key           = ''.
      APPEND ls_fieldcat TO alv_fieldcat.
      CLEAR ls_fieldcat.
    employee status
      ls_fieldcat-fieldname     = 'STAT2'.
      ls_fieldcat-tabname       = 'LT_MANPOWER'.
      ls_fieldcat-ref_fieldname = 'STAT2'.
      ls_fieldcat-ref_tabname   = 'P0000'.
      ls_fieldcat-key           = ''.
      APPEND ls_fieldcat TO alv_fieldcat.
      CLEAR ls_fieldcat.
    division
      ls_fieldcat-fieldname     = 'GSBER'.
      ls_fieldcat-tabname       = 'LT_MANPOWER'.
      ls_fieldcat-ref_fieldname = 'GSBER'.
      ls_fieldcat-ref_tabname   = 'P0001'.
      ls_fieldcat-key           = 'X'.
      ls_fieldcat-do_sum        = 'X'.
      APPEND ls_fieldcat TO alv_fieldcat.
      CLEAR ls_fieldcat.
    country
      ls_fieldcat-reptext_ddic   = 'Country'.
      ls_fieldcat-fieldname     = 'LANDX50'.
      ls_fieldcat-tabname       = 'LT_MANPOWER'.
      ls_fieldcat-key           = ''.
      ls_fieldcat-do_sum        = 'X'.
      APPEND ls_fieldcat TO alv_fieldcat.
      CLEAR ls_fieldcat.
    company code
      ls_fieldcat-fieldname     = 'BUKRS'.
      ls_fieldcat-tabname       = 'LT_MANPOWER'.
      ls_fieldcat-ref_fieldname = 'BUKRS'.
      ls_fieldcat-ref_tabname   = 'P0001'.
      ls_fieldcat-key           = ''.
      ls_fieldcat-do_sum        = 'X'.
      APPEND ls_fieldcat TO alv_fieldcat.
      CLEAR ls_fieldcat.
    personnel area
      ls_fieldcat-fieldname     = 'WERKS'.
      ls_fieldcat-tabname       = 'LT_MANPOWER'.
      ls_fieldcat-ref_fieldname = 'WERKS'.
      ls_fieldcat-ref_tabname   = 'P0001'.
      ls_fieldcat-key           = ''.
      APPEND ls_fieldcat TO alv_fieldcat.
      CLEAR ls_fieldcat.
    employee group
      ls_fieldcat-fieldname     = 'PERSG'.
      ls_fieldcat-tabname       = 'LT_MANPOWER'.
      ls_fieldcat-ref_fieldname = 'PERSG'.
      ls_fieldcat-ref_tabname   = 'P0001'.
      ls_fieldcat-key           = ''.
      APPEND ls_fieldcat TO alv_fieldcat.
      CLEAR ls_fieldcat.
    job title
      ls_fieldcat-fieldname     = 'PLANS'.
      ls_fieldcat-tabname       = 'LT_MANPOWER'.
      ls_fieldcat-ref_fieldname = 'PLANS'.
      ls_fieldcat-ref_tabname   = 'P0001'.
      ls_fieldcat-key           = ''.
      APPEND ls_fieldcat TO alv_fieldcat.
      CLEAR ls_fieldcat.
    action type
      ls_fieldcat-fieldname     = 'MASSN'.
      ls_fieldcat-tabname       = 'LT_MANPOWER'.
      ls_fieldcat-ref_fieldname = 'MASSN'.
      ls_fieldcat-ref_tabname   = 'P0000'.
      ls_fieldcat-key           = ''.
      APPEND ls_fieldcat TO alv_fieldcat.
      CLEAR ls_fieldcat.
    action date
      ls_fieldcat-fieldname     = 'BEGDA'.
      ls_fieldcat-tabname       = 'LT_MANPOWER'.
      ls_fieldcat-ref_fieldname = 'BEGDA'.
      ls_fieldcat-ref_tabname   = 'P0000'.
      ls_fieldcat-key           = ''.
      APPEND ls_fieldcat TO alv_fieldcat.
      CLEAR ls_fieldcat.
    ENDFORM.                    "set_fieldcatalog

  • I switched to a samsung galaxy 5 AND MY friends w iphones cannot get my text because i message is holding them hostage!!! help

    I switched to a samsung galaxy 5 AND MY friends w iphones cannot get my text because i message is holding them hostage!!! help!
    Ive done everything that a t and t have told me to do. text 48369  ive turned off i message on all devices and i still can't recieve text from iphone friends

    ksfm3 wrote:
    I did all of those things prior to posting on how to fix it. None of these worked. I changed my password.
    For what silly reason would any intelligent person believe that changing an Apple ID password would have any affect on iMessage?
    From the link provided:
    If you can't access your iPhone, you no longer have it, or you can't deactivate iMessage after you try the above steps, please contact Apple Support.
    Performing these tasks won't deregister iMessage:
    Logging into My Support Profile and changing your password or removing your phone number
    Sending an SMS text message STOP to 48369
    Resetting your network settings
    Changing your Apple ID password

  • I cannot get my text to advance to the next line when hitting enter???

    I cannot get my text to advance to the next line when hitting enter.
    Any suggestions??

    When I open Keyboard Shortcuts, the name field under Set: is highlighted in dark blue.  I cannot type a name in it.  The button NEW SET remains ungray.  When I click on the button no change happens to allow me to create new set.
    I also noticed that I am unable to scroll down in the InDesign document using scroll off mouse.
    So I have to click and drag to get around not using the up/down arrows when moving the illustrations.
    If I have to enter text I will use storybook.
    If I have to delete text I will use the InDesign document.
    Very limited with the functionality - I was better off using Adobe InDesign 2.0!
    Will need more time to investigate why the keyboard and mouse are not being recognized.  At this time I will have to use the work-arounds to meet deadlines and revisit later.

  • How to make text elements flow to next page depending on the table above it in main window (smart forms)

    Hi all,
    In my main window i have a table that contains line item data.
    Just below that i need to display text elemet (some text and terms & conditions).
    as below
    Based on the items in table, it should flow to next page. But it is not happening. rather the data which do not fit into first page gets deleted.
    Please help to solve this. Its urgent.
    Thanks in advance

    Hi Rashmi,
    please drop these texts from your table footer (i hope you have put into footer of your table), just create a template after your table and  put your all these data within this template and make sure that your this
    template should be called after your tables data get displayed.
    Or you can create a text , after your table where you put your data, and it should get displayed when the line items ends for your table.

  • Text placement flowing onto new pages?

    I am having a difficult time with the placement of text as it flows onto the next page.
    I get everything to flow correctly--the field expands, goes onto the next page fine. I have a time field associated with this text field, which pushes it to the right. However, when the text field flows to the next page, it moves over to the left! I want it to stay in place, but I can't figure out how. Any suggestions?? It's kind of driving me batty!
    I would have attached the pdf here to show exactly what I'm talking about, but they seem to have taken away the ability to attached pdf documents? I  can only attach a video or picture. So I took a screen shot of what the form looks like when you try to fill it out and it goes onto the next page. I hope this helps.

    I believe, there are 2 items to be attantioned:
    first:
    look at object-panel, the field-tab, there is a cross to be set at pagebreak...
    second:
    look at the Layout-panel: there is a cross to be set under Y and Hight!
    if no effect, than, take a new part of form around our item and check these 2 opinions to be set:
    it might be work.
    well, it has been this weekend my fashion to find a relation between these two selected items, not well.
    ok?!

  • Cannot get the text (body) of each e-mail - Just the headings

    How do I get the body of the e-mail message?.  I receive the preview and when I click on the message the only thing is the heading material.  This just happened recently and I cannot determine what I did to cause this problem.  Thanks

    Quit mail completely and restart the iPad.
    Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Try this as well if that didn't work.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • I just made an new Itunes account and cannot get past the accepting terms and conditons page to use the Itunes store how can i finish and redeem my code

    I cannot use Itunes store to redeem my gift card because it says that my apple id has not been used in the Itunes store yet.  When I click review i then clicked continue and everytime that I agree to the terms and policies on the second page it just sends me back to the top of the page and doesnt allow me to go any farther in the itunes store process any idea of how to get this to work?

    Have you done as the message tells you and contacted iTunes Support ? If not (these are user-to-user forums) :
    - go to http://www.apple.com/support/itunes/ww
    - click on your country's flag
    - click on the Contact Support at the bottom of the left-hand column
    - click on Contact iTunes Store Support on the right-hand side of the page
    - then Purchases, Billing & Redemption

  • How to get header row to flow to next page with table content?

    I am setting up a dynamic form with a series of question/answer tables. 
    Example: 
    Header (Text):  List your accomplishments for the year. 
    Row 1 (Text Field):  Associate types their response to the question above.
    If I type enough text in the response that it flows down to a second page, both the header AND the response box drop down to the second page....ultimately leaving a big white space on Page 1.  I would like for the header to flow to the next page, but only with the 'extra' text that didn't fit on page 1...not ALL of the text.
    Is this possible? 

    I am doing exactly that. My issues is that, VO attribute is passed correct for the table rows which are fetched from the database. For the table rows which got created through 'Add Another button', the VO attribute passed through URI as {@FdTaskId} is returning null. The VO attribute sets only when a form submit happens. For example, after adding a row through 'Add another row' button, click the same button again to add one more row and now go back to previously added row and now you can see that its VO attribute is set ({@FdTaskId} carries value )

  • How to square up texts and flow through these pages ?

    Hi!
    I have to square up and shading numerous paragraphs of different loguitudes in Indesign CS6 .
    These have them identified in the xml for tag
    Often there tour of pages in second tests so I thought convert a table but not if it is the best solution because no party cells and lose a lot of time adjusting the pages so you are not left me out of square .
    Can you think of any other solution that does not require much manual work ?
    Thank You

    Hi
    I am not sure about your question 1 exactly (may be you can elaborate) but you cannot probably track that information module wise.
    For the second question, you can count the number of httpd processes in 11i and get a estimate of how busy the system is . there wont be one to one mapping between client and application server connections but you can check the access logs if you are troubleshooting an issue.
    MSK

  • I'm running 10.5.8, trying to print from Word 08 to a HP C5180 all in one, getting random text along top of first page then the printer keeps feeding paper through.

    I downloaded the driver and software from HP for my OS, during installation it says HP Monitor Tray? quit unexpectedly, then it says installed successfully.  I opened Word 08 for Mac, typed a test page, hit print, and the first page came out with three lines of words and numbers, then the printer continued to feed blank sheets through?  I tried printing from TextEdit and it says "Textedit quit unexpectedly." Please help, I am new to the Mac and this is driving me nuts.  Thanks.

    That happens when the printer driver sends binary when ASCII or something else is expected. It ususally means the driver is goofed up.
    If this is an inkjet all-in-one, most of those are "dumb" printers that have a "monolithic" driver that does the imaging on the Mac, then sends the bitmap to the printer.
    The default for Mac OS X Printers is to send Postscript to the printer. So if there was any trouble installing the driver or setting up the Printer, it would end up a generic postscript, and that would go badly.

  • I cannot get flashplayer to function even after following all instructions. Who can I talk to?

    I followed all instructions, help topics, etc., and flashplayer still does not function. (IE 10). Who can I talk to for help?

    Check
    http://forums.adobe.com/thread/885448
    http://forums.adobe.com/thread/867968

  • I cannot get any content to print, only the page headers print

    Ever since I updated Firefox to 3.6, only the page headers print when I try to print something. This does not happen with IE. Everything else works fine with Firefox, and if I copy the contents and paste it into something like Wordpad etc., I can print it.
    I am using a Samsung CLP-310 with current drivers. I tried uninstalling and reinstalling both Firefox and the printer drivers.

    Try installing the printer via System preferences using this driver:
    http://software.canon-europe.com/software/0025024.asp?model=

Maybe you are looking for