I cannot get the former home network

Hi everybody. I had my home network perfectly working (iMac+Laptop with Vista+TC 1Tb). With this layout I could use the internet and the printer from my pivotal laptop as well without switching on the iMac. Suddenly, I lost the internet network connection and after rebooting the TC, I can reach the internet again but I only use the printer with the iMac turned on. I did all the procedures to put the network as it was many days ago but I couldn't. The laptop only sees the printer on the iMac (even with the printer connected to the TC as it was before!). Any help will be well accepted. Thanks all!

I suppose that all other devices can connect with no issues?  Well what does the WLC log show when you try to connect?

Similar Messages

  • Cannot get the basic home page up, the page with the file,. edit, view, history bar on the second line. Our home compouter is partitioned. This comes up on my side, but not on my wife's side. ANy suggestions? Thanks, John Mt Shasta, CA

    What comes up on her side on the second bar is most visited, getting started, latest headlines.

    Thanks. Did it in 3 seconds, after many fruitless hours of novice flailing.
    Thanks, JB

  • Just moved to new home, updated router and new system with Time Warner and now we cannot get the appl

    just moved to new home, updated router and new system with Time Warner and now we cannot get the apple any ideas?

    Castle15 wrote:
    just moved to new home, updated router and new system with Time Warner and now we cannot get the apple any ideas?
    Cannot get the Apple.. what?
    Model and actual device you are talking about?
    Apple covers a pretty huge range.. If you mean extreme.. did you reset it to factory and start over.. that is always necessary when you change a network. You cannot pick up a router from one home and network and plonk it into another and have it work.. aint gonna happen.
    You also need to power down any pure cable modem for 20min or so to get it to forget the old MAC address that captured the IP so the Apple ??? has a chance to work.

  • I recently thought I lost my iPhone and I erased it but now that I found it. I cannot get the this iPhone message is lost please call ********* I am out of the country my laptop is at home. I cannot access I tune. How do I fix this. I have an iPhone 4s

    I recently thought I lost my iPhone and I erased it but now that I found it. I cannot get the this iPhone message is lost please call ********* I am out of the country my laptop is at home. I cannot access I tune. How do I fix this. I need to get it back on so I can face time with my family. The phone says 3G but it keeps saying on list mode. I signed on icloud and removed it from the account and nothing. Please help!

    If you removed the device from your iCloud account rather than using the "Stop Lost Mode" option, then you will most certainly need to restore the iPhone, and that will require a computer running iTunes.
    http://support.apple.com/kb/HT1414
    Regards.

  • Since upgrading my iPhone 5 to ios 7, I cannot get the internet, email to work on 3g.  I get the message ""could not activate mobile data network. You are not subscribed to a mobile data service".  How do I fix it?

    Since upgrading my iPhone 5 to ios 7, I cannot get the internet, email to work on 3g.  I get the message ""could not activate mobile data network. You are not subscribed to a mobile data service".  How do I fix it?
    I've contacted o2, tried all of their suggested updates and changes, reset my phone 3 times and still no luck.
    Any help appreciated.
    Thanks,
    Louisa

    Hi, l have the same problem, were you able to resolve?

  • I have iPad air, screen freezes after FaceTime call and cannot get back to home screen, have to power down and turn back on to get back to home screen.  What am I doing wrong?

    I have iPad air, screen freezes after FaceTime call and cannot get back to home screen, have to power down and turn back on to get back to home screen.  What am I doing wrong?

    Hi RWD2,
    Welcome to the Support Communities!
    To resolve your issue with Facetime freezing when you end a call, I would try the first three steps in the article below. 
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Resolution
    If a single application is not responding or stops responding when it opens, you can force it to close.
    If the device is unresponsive or if certain controls aren't working as expected, restart your device.
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If you are using Wi-Fi, it may be helpful to try these troubleshooting steps as well:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398?viewlocale=en_US
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
    Note: This will reset all network settings including previously connected Wi-Fi networks and passwords
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    I hope this information helps ....
    Have a great day!
    - Judy

  • TS1702 I cannot get the keyboard to come up on the ipad mini when in the citrix receiver.  Has anyone ran into this and do you know how to fix it?

    I cannot get the keyboard to come up on the ipad mini when in the citrix receiver.  Has anyone ran into this and do you know how to fix it?

    I am not familiar with Citrix Reciever but is it possible it is open or being used in another open app?
    Try quitting all apps then try again.
    Quit all apps: Double tap the Home button and swipe the app preview page up for each open app

  • Firefox 13 and 14 will not install properly on my windows 7 starter. Also I cannot get the Scrapbook addon to work. Can you tell me why ?

    I have tried to install Firefox 13 and 14 on my netbook, running a Windows 7 starter OS. The installation begins to go smoothly from the setup.exe file; but after the installation seems complete, and I press the 'Open Firefox' button the firefox programme can be seen to start opening because it accumulates about 50mb of private bytes RAM on the windows task manager or on the 'process explorer' utility program by sysinternals. '''However the firefox screen/window never opens up and so firefox does not seem to be properly installed.'''' Also I have had problems with getting the Scrapbook" addon to install properly. I have another computer, a laptop, running XP Home, and I can get the Firefox 13 or 14 to install but it is on this other computer that I cannot get the 'Scrapook' addon to install properly; There is no notice on the Addon page saying the 'Scrapbook' addon does not work on Firefox 13 or 14, and the addon does install, but not properly, so it does not work.
    I have the old Firefox setup.exe files, and so I have managed to install an old version, firefox 3 or 4, on an external hard drive. I have successfully got this old firefox to work on the XP Home laptop from an external hard drive, and can successfully use the 'Scrapbook' addon in this way.
    I cannot understand why I have problems with Firefox 13 or 14. I think I first noticed the problem about 'Scrapbook' with Firefox 12.

    It seems your Mozilla installation is broken. Try the following steps to fully uninstall Mozilla Firefox:
    1. Uninstall Firefox as you would normally do.
    2. Open a command prompt as administrator.
    3. By using the cd and rd command, remove Firefox AppData and Roaming folders, for example:
    C:\Users\USERNAME> cd AppData
    C:\Users\USERNAME\AppData> cd Local
    C:\Users\USERNAME\AppData\Local> cd Mozilla
    C:\Users\USERNAME\AppData\Local\Mozilla> rd /s Firefox
    C:\Users\USERNAME\AppData\Local\Mozilla\*.* - Are you sure? (y/n) y
    C:\Users\USERNAME\AppData\Local\Mozilla> cd ..
    C:\Users\USERNAME\AppData\Local> cd ..
    C:\Users\USERNAME\AppData\> cd Roaming
    C:\Users\USERNAME\AppData\Roaming> cd Mozilla
    C:\Users\USERNAME\AppData\Roaming\Mozilla> rd /s Firefox
    C:\Users\USERNAME\AppData\Roaming\Mozilla\*.* - Are you sure (y/n) y
    C:\Users\USERNAME\AppData\Roaming\Mozilla > exit
    Remember to press Enter each time.
    4. After that, open a hard disk clean-up tool (such as CCleaner or Windows built-in) and remove all temporary files from your computer.
    5. Restart your computer. Download '''again''' the Firefox package from [http://www.mozilla.org/es-ES/download/?product=firefox-14.0.1&os=win&lang=es-ES Mozilla official servers] and try to install Firefox. If the problem persists maybe your computer has a problem or is infected with viruses.
    About the Scrapbook add-on, I could get it to work. It has no icon when docked to the toolbar, but you can anyway open it. Right-click a button on the toolbar, click Customize... find the Scrapbook icon, drag it to the bookmarks bar so you can see the icon and click on it to open it. Whenever you need to save a page, right-click that page and choose Save page.

  • HT4557 I cannot get the air play icon on my iPhone 5 or ipad to work on my Apple TV . Also my laptop is broken at the for the time being

    I Cannot get the airplay icon on my iPhone or I pad. Do I need to turn on home sharing on my laptop. I am asking this as I have broken my laptop and I have just got Apple TV and I want to mirror it

    Try this:
    http://support.apple.com/kb/ht4437

  • Sharepoint 2010, InfoPath 2010 with Custom Workflow. Error Message: InfoPath cannot submit the form. An error occured while form was submitted...

    I have created an InfoPath form that submits to a Sharepoint library with custom workflow attached. The workflow is initiated when the user submits the form. An email is sent to the supervisor who clicks the "Encoded Absolute URL" and approved
    the form via the emailed form. Then, based on certain criteria the form is either emailed to the VP or the workflow is complete. The VP is sent an email and clicks the "Encoded Absolute URL" and sumbits the form via the emailed form. This is
    how I would like it to work. The reality is, the form submits and is emailed to the supervisor and the supervisor is able to approve but when the form is sumbitted I get an error. The error is "InfoPath cannot submit the form. An error occured while
    this form was being submitted. The form cannot be submitted to the following location: <URL> The file <URL> is checked out for editing by <me> The operation completed successfully." The operation did not complete successfully and it
    is not checked out. I have read in previous posts that the file is locked. Since I am in the testing faze of the project there is no one else using the form. I have waited 24 hours and the lock has not been released. Please help!!! My deadline is growing short.

    I ran into your post while having a similar issue.  I don't have a 'full' fix for you, but I noticed at least in our case if you made sure you opened the Infopath form through the browser instead of the client Infopath program (use the drop-down menu
    and open in browser) the error doesn't occur.  Hope that helps some....

  • My IPad screen is frozen with a message stating that the IPad has not been backed up to the ICloud for 7 weeks, this is not correct.I cannot get the messageto clear and cannot access any of the other icons; is there an emergency reboot process?

    My IPad screen is frozen with a message stating that the IPad has not been backed up to the ICloud for 7 weeks, this is not correct. I cannot get the messageto clear and cannot access any of the other icons; is there an emergency reboot process?

    Have you tried resetting your iPad?
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
    No data will be lost.

  • How do I revert to original footage in Final Cut Pro X version 10.0.9, for some reason I have lost some audio in my timeline and would like to start again but cannot get the original footage?

    How do I revert to original footage in Final Cut Pro X version 10.0.9?
    For some reason I have lost some audio in my timeline and would like to start again but cannot get the original footage?
    Only the edited version which is no good without the audio?
    Please  Help

    What format is your problem clip? Are there wave forms visible in the section without sound?
    Right click on the clip in the event broswer and choose Reveal in Finder; open the clip in Quick Time to confirm that there is sound throughout at that stage of your workflow.
    Russ

  • I am using Numbers on my iPhone5 and cannot get the app to do a simple (SUM) calculation.  It shows the formula correctly in the cell, but all I get for my long list of numbers to add is 0.  How can I get this to work?

    I am using Numbers on my iPhone5 and cannot get the app to do a simple (SUM) calculation.  It shows the formula correctly in the cell, but all I get for my long list of numbers to add is 0.  How can I get this to work?

    Oaky, at least we got that far.  Next step is to determine if all those "numbers" are really numbers.  Changing the format to "number" doesn't necessarily change the string to a number. The string has to be in the form of a number.  Some may appear to you and me as numbers but will not turn into "numbers" when you change the formatting from Text to Number. Unless you've manually formatted the cells to be right justified, one way to tell if it is text or a number is the justification. Text will be justified to the left, numbers will be justified to the right.
    Here are some that will remain as strings:
    +123
    123 with a space after it.
    .123

  • I have a new unlocked iphone3gs. I cannot get the video to work. When I try to record video I am not offered any options. It films until I tap the red button, but then everything just freezes. I

    I have a new (from Apple) unlocked iPhone3gs. I cannot get the video recorder to work. When I take video I am not offered any options at the start or the end of filming. The screen freezes when I hit the red stop button. But that's it. I have to hit the home button to get out of that. And none of the v-recordings can be found on my phone anywhere.
    Also I'm having trouble with Bluetooth. My Mac says it's paired with the phone, but the phone says not; even though It accepts the pairing code from the Mac. I'm getting very frustrated with these problems. I came on here to find the user manuel, but can only find the fingertip manuel and the product license manuel. Both of which I have in hard copy.
    And the most annoying thing is the sound on the calls. I can hardly hear the caller.
    Anyone got any helpful advice?
    Thanks, Elizabeth

    Robert or Elizabeth...
    Sync media using iTunes, not Bluetooth.
    When the screen freezes on the iPhone, try "resetting".
    Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.
    And this link is for the iPhone 3GS user guide >  http://manuals.info.apple.com/en_US/iPhone_iOS3.1_User_Guide.pdf
    Main iPhone Support >  Apple - Support - iPhone
    Serously doubt this is a "new" iPhone 3GS. More likely refurbished.

  • In wunderlust-brown content slideshow I cannot get the content to show in IE 8

    I am using wunderlust-brown content slideshow. I cannot get the content to show in IE 8. The picture shows but no content. I narrowed down the problem to a missing CSS attribute - .WLBSlideShow .article
    If I add .article to the end of the .story attribute (.WLBSlideShow .story .article) then I get content in IE 8 but the page no longer works properly in Firefox or Chrome.
    I want to know what CSS code is supposed to be in this file for the .article attribute. It is a simple problem and I hope I can get a resolution quickly.
    Thanks.

    Thank you for the URL, this makes it a lot easier.
    Change your DOCTYPE and HTML declarations form
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
    <html>
    to
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    Move
    <script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
    <link href="SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css">
    to just below the link to style.css, but above the links to Spry-UI-1.7

Maybe you are looking for

  • 2007 iMac keeps freezing mostly after sleep mode, but now does it randomly

    Coming out of sleep mode it does it every couple of days. Recently it has done while I have been watching a movie. I have restored from scratch and reinstalled Mountain Lion. I don't have many apps running at the same time for I only have 4 gigs (the

  • Using Select Statement in the decoe function in Oralce Form10 g

    Hello All: Is it possible to call another Select Statement inside the Decode Function in Oracle Form? I tested the SQL on PL/SQL Plus, it ran without giving any errors. However, I got the following errors when I tried to compile the procedure in the

  • Oracle RAC implementation for SJSWS

    Hi, we have a requirement to set up Sun Java system webserver with Oracle RAC. Please let me know the implemetation details, like how to setup multiconnections/datasource in Webserver console. any details with respect to this are appreciated. Thanks

  • Grave accents è in Mac OS X 10.4.9

    Since my last update on Mac OS X 10.4.9, I cannot find the way of writing with grave accents <è> as I usually did with my spanish keyboard. My language is Catalan and these accents are used really frequently. Anyone knows if it's some configuration s

  • Expand tree node by clicking onto the node label

    I have followed this example to expand the nodes with a clic on the tree : [http://www.oracle.com/technetwork/developer-tools/adf/learnmore/20-expand-tree-node-from-label-169156.pdf] My code: JSPX: <af:resource type="javascript" source="js/glasspane.