I cannot get the photoshop download to start from the order page - any ideas?

i cannot get the photoshop download to start from the order page - any ideas?

Brookie_g75093 I would recommend trying the steps listed in I can't download a purchased product from the Adobe.com Store.

Similar Messages

  • HT1349 cannot get lion to download and install from the app store

    the lion os app took 2 days to down load then did not install from the app store.

    Do you mean the install button stays on install, or do you notice a loading bar under your Launchpad icon?
    This may help...
    http://asia.cnet.com/having-problems-installing-os-x-mavericks-look-here-6222279 2.htm

  • My MacBook Pro doesn't start; in safe mode shift CMD V the message "disk0s2: media is not present" is written on the screen repeatedly but the MacBook doesn't start.  Do you have any ideas of why this should be or what I should do to resolve this?

    My MacBook Pro doesn't start; in safe mode <shift CMD V> the message "disk0s2: media is not present" is written on the screen repeatedly but the MacBook doesn't start.  Do you have any ideas of why this should be or what I should do to resolve this?  Thanks  Eamonn

    Thanks for these suggestions: I have tried safe mode re-starts (both "verbose" and simple "shift" + power) to no avail.  I get the error message "disk0s2: media is not present".  Following this I inserted the installation disc and from there ran disc utility.  The "Verify Disk" indicated an error " invalid sibling link" which it could not repair.
    I also tried to completely re-format/erase the disk, but again got an error message "disk object invalid or unable to serialize".
    Any ideas of what could be causing this or the best solution?  I fear I am fast running out of options.

  • I listen to a lot of live performances (house sets that are from 1 hour to 3 hours long) when I start to listen to a set and then stop to do something else on the iPhone when I go back to start to listen to the track it has started from the beginning.

    I listen to a lot of live performances (house sets that are from 1 hour to 3 hours long) when I start to listen to a set and then stop to do something else on the iPhone when I go back to start to listen to the track it has started from the beginning.

    It sounds like either your hard drive or the SATA cable that connects it to the motherboard are failing. This could be heat related in your case, which is why you see it after it runs awhile. You can take it to the Genius Bar for a free evaluation. If you decide to test it yourself, I usually suggest moving the hard drive to an external enclosure. If it works there for awhile, the cable is probably the issue.
    http://www.amazon.com/Sabrent-2-5-Inch-Aluminum-Enclosure-EC-TB4P/dp/B005EIGUD4/ ref=sr_1_3?ie=UTF8&qid=1397647657&sr=8-3&keywords=2.5+enclosure
    http://www.ifixit.com/Device/MacBook_Pro_13%22_Unibody_Mid_2009

  • I record some information to some slides but the presentation doesn't start from the 1st one but from the one I started the recording. What should I do?

    I record some information to some slides but the presentation doesn't start from the 1st one but from the one I started the recording. What should I do?
    Also, can I use music as backround to some of the slides, not to all of them as I'd like to play videos on the others?

    I have reinstalled the drivers. I watched it install the realtec and cirrus drivers. Hovering the mouse over the speaker icon says 'speakers: HP'. They are actually 'Creative'. 'Properties' indicates 'IDT High Definition CODEC' and 'This device is working correctly'.
    Driver details gives 'c:\Windows\system32\drivers\dmk.sys'.
    There is still no sound, although the little level meter on the control shows a green bar rising and falling.
    Obviously, it thinks it's working, but there's no connection to the speakers. They're not muted, either. I checked that too.
    Any other ideas?
    Thanks.

  • My iPhone 4s won't switch off. I have cleaned the power port and restored from back up. Any ideas?

    My iPhone 4s won't switch off. I have cleaned the power port and restored from back up. Any ideas?
    Many thanks

    You say iPhone 4s but list an iPhone 3GS
    Try to reset:
    Hold the Sleep/Wake & home buttons until the screen goes dark & the Apple logo appears
    To power off:
    Hold the Sleep\Wake button until you see slide to power off then slide to power off

  • Cannot get itunes to load on new computer. Widows 7 any ideas???

    I have ane wcomputer running Win 7. I cannot get itunes to load. i authorized the unit and all i get is a prompt to repair or delete itunes. When i hit repair it then promps me to delete itunes and that is the only choice I have. any ideas?????

    You can only have 5 computers authorised at the same time. If you won't be using the old computer you should deauthorise it.
    Don't try to transfer your library via home sharing, simply copy the entire iTunes folder (and all subfolders) across the network or via an external drive. If the media folder is not a subfolder of the main iTunes folder that holds the database files (or you have any media in other locations) then these folders need to end up at precisely the same paths on the new computer as they had on the old one, otherwise as long as the media folder remains a subfolder of the iTunes folder all should be well.
    tt2

  • Hi Every body, after i updated the photoshop to cc 2014 version it become slower any idea how to fix it

    the new photoshop cc2014 dosnt work properly in my machine

    CC 2014 performance has not change much from prior versions.  It sounds like an installation problem. Something in your system configuration is not quite right.  A device driver like a wacom tablet driver. A display driver. Bad system fonts. Corrupt Photoshop cc2014 preferences. You need to track down the cause.

  • I am having problems with mail after upgrading to snow leopard. When I send an email to somebody, I would get a reply from them but the content of the reply were old emails from months ago. Any ideas what's going on?

    For ex. The subject of my email was "List of kids dancing this weekend". Then i would compose my email and send it to the recepient. They responded to my email with the same subject "List of kids dancing this weekend" but the content of the email was the email I received from somebody else months ago. This "phenomenon" happened serveral times already. Please help!

    Check this post out
    http://hints.macworld.com/article.php?story=20110516152604993
    Turns out the auto-complete database is a SQLite DB stored in this folder.  Probably the ownership and/or permissions are messed up on your system.  Mine (under Snow Leopard) show  ownership by me and rw privilege for all files in that directory, including MailRecents....

  • TS3931 I cannot get my Macbook air to move off the start up screen with the Apple logo and spinning gear.  HELP!!!!

    I cannot get my MacBook Air to move from the gray start up screen with the Apple logo and spinning gear.  Please help

    I cannot get my MacBook Air to move from the gray start up screen with the Apple logo and spinning gear.  Please help

  • How do I restart iOS download after internet crashes without having to start from the beginning.

    My internet crashes and stops downloading the iOS restore software for my phone.  When I try to restart the download, it starts from the beginning.  How can I get it to cary on from where it left off?  Why doesn't it do this automatically!?
    Thanks.

    If you've already unsuccessfully tried to resume the download then the previously partial download may no longer be present on you computer.<br />
    What you can do in such a case is:
    * Move the old .part partial download and the 0 byte final file without the .part to another location.<br />
    * Start a new download and pause it, don't close Firefox.<br />
    * Copy the two files (.part and 0 byte final) that you moved above back to the download location to replace the new files that were created.<br />
    * Resume the download in Firefox.

  • I installed ios6 and cannot get my previously downloaded Kindle books

    I installed ios6 on my ipad and now cannot get my previously downloaded Kindle books.  The error message says to remove them
    from the ipad and then redownload but they want uninstall.

    Well this was my first time using the support communities app on the web so when I tried to get the answer there were literally 1000's of post and I was not sure which one pertained to me and my iPhone issue. Sorry if I offended in some manner, didn't mean to.

  • When using logic's arpeggiator, how do I get it to resart its cycle from the root of a new chord instead of resuming its cylce in the same range with the new notes?

    I'm arpeggiating A minor over a number of octaves and I want to switch to D minor before the cylce is over. However, I want the d minor to start from the lowest note that I'm playing as if it were a new cycle. What it does instead is continue the cycle, but uses D,F,A instead of A,C,E.
    If Logic's arpeggiator is not capable of doing this, can anyone recommend a third party arpeggiator that can? (hopefully cheap/free)
    Thanks.

    You need to make sure to give a clean break between the two chords, if any notes are not completely severed between the chord changes the pattern continues from the first chord.  Kind of how in a synth when set to legato it doesn't re-trigger the envelope if the notes run together.

  • Scrolling with mouse wheel in column browser starts from the start of the list

    Hi, I'm wondering if anyone else has been encountering this problem with iTunes.
    Ever since updating to 10.5, whenever I use the mouse wheel to scroll in the column browser, it starts from the start of the list, regardless of which artist or album is highlighted.
    For instance, I press the M key to jump to artists starting with M, then use the mouse wheel to scroll down the list, in iTunes 10.5 it jumps me back to the As.
    The strange thing is that if I then use the mouse wheel to scroll down to the Cs, then jump down the list via a key press, mouse wheel scrolling will start me back to where I last scrolled (C).
    How can I fix this problem?
    I'm using iTunes 10.5.0.142 on Windows 7 Home Premium.

    I can confirm the behaviour. It would seem iTunes is keeping a separate record of the position in the list for use by the scroll wheel, and then snapping to that before scrolling up or down a screenful. The same random jumps happen if you use the keyboard Page Up/Page Down commands and then use the mouse wheel.
    I shall file a bug report.
    tt2

  • Depreciation for additions to start from the following month

    Hi Gurus,
    Have situation in depreciation posting, When acquisition happens depreciation has to start from next period on wards (Dep not to post in Acq period) this is working fine and good. (period control maintained as 11 for Acq)
    In the same way it has to apply for Additions if any happens for existing Acquisitions. Period control set as next month 11 for additions, but system making the posting in acquisition period itself including catchup of previous periods from oredinary dep starting.
    I want make the system to start depreciating dep from the following period rather than acquisition period for Additions and catcup dep also post in this from Ordinary depreciation start date .
    Example of Issue:
    Acquisitions:
    Acquisition happend in Period-01, dep started from next period "02"
    This working fine.
    Addiotions:
    Using the above example
    Addition happend in period-05, Dep started from-05 including the catch up dep of periods; 02,03,04,05.
    By right the depreciation posting has to starts in the following Perios 06, has to consider Catchup amounts also.
    Any help on the above are appreciated most.
    Points are available
    Thanks in advance,
    Vyas

    Hi Milosavljevic,
    On the above system behaviour is right, but we have to understand like below:
    What ever posted the Depreciation amount in the acquissition month it belongs to accumilation depreciation of the addition of asset ( from ordinary dep start date to untill acquissition period).These happend bcoz of catchup, the real depreciation was started from the following month onwards..
    Hope this understanding made me clear...
    If u able to find any thing better pla keep share..
    Others plz comment on this for better understanding.
    Thanks,
    Vyas

Maybe you are looking for

  • How can I change the iCloud associated with my iPhone when the email account no longer exists?

    My mum had the iPhone that I'm now using for a couple of years, and the iCloud account attached to it uses an email address that was shut down by Virgin, so we can't access it any more to verify emails, etc. Now that I'm using it, I want to assign it

  • BAPI to get the new pernr while hiring

    Hi Guys,        what is the BAPI/FM used to hire a new person and get the pernr created for that person?

  • Regarding Varrays (Urgent)

    Dear Experts, Please tell me how to store emp_name in varray. and I need to pass that varray to another procedure. so please send code .

  • Its like its not even there...........

    I just got my Zen Touch 40G today so i installed all of the software and registered it but when i plug it into my usb port it doesn't show up. I know the USB is working fine because i use it all the time. I did try another port just in case and it st

  • Doubt with default value

    i have a doubt as to how to alter a column to have a default value. For a new column, i know the syntax, it is:- alter table emp add loc varchar2(2) default 'AX'; But, how to alter a column to have a default value which is already there. I hope, my q