I cannot get the videos I shot with my iPad 3 to play back on my PC!

I have been uploading videos I have shot with my ipad 3 over the last year by hooking it up to my PC and just dragging and dropping.  I recently went back to play a video and realized that they don't play back properly!  The image skips, is slow and doesn't fully playback!  If I send the video through email its just fine.  I am so afraid I have lost all of the videos that now live on my PC because I have deleted them for room on my ipad.  I am now out of memory again on my ipad because I am too afraid to move and deleted them!  I even tried down loading an app to transfer the video wirelessly to my PC with the same outcome.
How can I fix this and are all my old videos lost?

is your problem that they don't play well on your pc
or that
you have lost them?
you can always sync them back to your ipad by adding them to itunes
the build in gpu of the ipad does hardware decoding of the format the ipad record in so
if the pc is older it could be the reason it does not have the power to play it back without poor performance

Similar Messages

  • How do I get a video I shot with my iphone into iMovie on my iPad?

    I can see it in the cloud, but I don't see an option to download it for local editing on my ipad. In iMovie there is a cloud option for media but it only shows an iMovie folder.
    So how do I get the media I shot with iPhone from the cloud to my iPad for editing?
    Ipad mini retina
    video shot on iPhone 6 plus

    Hi TumbaSC,
    I have an article for you that can help you address this question:
    iMovie for iOS (iPad): Transfer video and photos between devices
    http://support.apple.com/kb/PH3244
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • I have a new unlocked iphone3gs. I cannot get the video to work. When I try to record video I am not offered any options. It films until I tap the red button, but then everything just freezes. I

    I have a new (from Apple) unlocked iPhone3gs. I cannot get the video recorder to work. When I take video I am not offered any options at the start or the end of filming. The screen freezes when I hit the red stop button. But that's it. I have to hit the home button to get out of that. And none of the v-recordings can be found on my phone anywhere.
    Also I'm having trouble with Bluetooth. My Mac says it's paired with the phone, but the phone says not; even though It accepts the pairing code from the Mac. I'm getting very frustrated with these problems. I came on here to find the user manuel, but can only find the fingertip manuel and the product license manuel. Both of which I have in hard copy.
    And the most annoying thing is the sound on the calls. I can hardly hear the caller.
    Anyone got any helpful advice?
    Thanks, Elizabeth

    Robert or Elizabeth...
    Sync media using iTunes, not Bluetooth.
    When the screen freezes on the iPhone, try "resetting".
    Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.
    And this link is for the iPhone 3GS user guide >  http://manuals.info.apple.com/en_US/iPhone_iOS3.1_User_Guide.pdf
    Main iPhone Support >  Apple - Support - iPhone
    Serously doubt this is a "new" iPhone 3GS. More likely refurbished.

  • Made preference changes, but still getting the Ram preview needs 2 or more frames to play back.

    I'm new to After Effects CS6 and am working on a very simple Kinetic Typography project. I don't have a lot of memory, but this is a really simple project, so I'm wondering if maybe I'm just not using the work area correctly. Every once in while I can get the project to RAM preview, but only for a few seconds. Most of the time I get the "Ram preview needs 2 or more frames to play back" error message. I have pasted my sytem info and setting info bleow. Thanks for any insight! 
    I have checked the Render Multiple Fames Simultaneously box and have set the seetings at:
    Here is the info when you click on details:
    Installed RAM: 4.00 GB
    Current RAM Usage: 0.00 GB
    Allowed RAM Usage: 2.50 GB
    Process ID
    Application Name
    Min Needed Memory
    Max Usable Memory
    Max Allowed Memory
    Current Memory
    Current Priority
    3081
    After Effects
    0.00
    0.00
    2.50
    0.00
    3 - Low
    System info:
    System Version: Mac OS X 10.6.8 (10K549)
    Model Name: MacBook Pro
      Model Identifier: MacBookPro8,2
      Processor Name: Intel Core i7
      Processor Speed: 2.2 GHz
      Number of Processors: 1
      Total Number of Cores: 4
      L2 Cache (per Core): 256 KB
      L3 Cache: 6 MB
      Memory: 4 GB

    What exact version of After Effects?
    Show a screenshot of your TImeline panel and Preview panel when the problem occurs.
    Make sure that we can see the details in your screenshot. Your current screenshot is unreadable because it's so small.

  • I have a sony cybershot camera and i cannot get the videos off of it and on to my mac, does anyone know whats up?

    Does anyone know how to get the videos off?

    Hi
    Is't it so that a Canon CyberShot-Camera is a Still Camera that can take Video clips ?
    If so
    Import into iPhoto (video goes here too)
    then in iMovie import
    • Photo's from Media button / Photos
    • Video from EVENT'S window - iPhoto-videor
    Yours Bengt W

  • We have a Lexmark Pinnacle Pro901 and cannot get the printer to work with airport express - any suggestions?

    Can anyone give us suggestions on how to get our Lexmark Pinnacle Pro 901 to work with airport express? We cannot get airport express to recognize the printer.

    Refresh all your devices before reconfiguring printer to connect to your computer.
    a Shutdown computer
    b Pull out printer power cord from the socket. Let it stay for at least 30 seconds then plug it back.
    c Powercycle your router (unplug your router for at least 30 then plug it back. This will not change the settings of the router. This will just refresh the device)
    d Once router is ready , put back brick at the back of the printer to turn it on
    e Wait one minute
    f Turn on computer
    Repair your disk permission: http://bit.ly/OeD7U3
    Run Cleanup tool http://bit.ly/vnukXY
    Download updated driver from Lexmark website http://bit.ly/ToA1fo
    Run firmware update http://bit.ly/AcNqbg

  • HP Photosmart Printer-cannot get the apps to work with a USB hook up

    I purchased a HP Photosmart Printer C310 and hooked it up to a USB, not wireless. The apps on the printer will not work, says it has to be on wireless for those features to work. When I purchased it the guy said I could use those apps even if it was on a USB hook up? Any ideas of how to get the apps to work without the wireless?

    Make sure you have done this to reset the iPod
    http://support.apple.com/kb/ht1320
    and that you have restarted your computer since this problem occurred.  You should also try disconnecting all USB devices from your computer including hubs (except standard keyboard and mouse if normally used), and connecting the iPod by itself to a direct USB port.
    There are no iPod viruses. But data corruption on the iPod's storage is possible. 
    If doing the above does not help, you may want to do a Restore on the iPod, from the iPod's Summary tab in iTunes.  This will erase the iPod, re-install its software, and set it to default settings.  If data corruption or a software glitch is causing the problem, a Restore should fix it.

  • I have three computers (Dell and HP) two I phones and I cannot get the iphones to sync with the computers.  I recently installed ITunes 11.0 on all computers and have no success getting iphones to sync since then.  The iphones are a 4 and a 3S

    I have three computers, 1 dell and 2 hps.  I have downloaded the new 11.0 on all computers and now am unable to get my iphones to sync.  I also can't get the home sharing to work...shouldn't I be able to get all libraries from all computers on both phones...if they would download?  It tells be I have to delete the previous libraries to add the phone to a new computer.

    If you no longer have the computer(s) you want to deauthorise,
    Log in to iTunes,  go to "view your account info" on the itunes store,  deauthorise all five, (Please Note: this can only be done Once every 12 months)  and then re-authorize your current Computer(s) one at a time.
    Authorise / Deauthorise About
    http://support.apple.com/kb/HT1420

  • Can't get the video to work on my ipad 7.0.2...camera works...has the word "video" on the camera screen but no open when I touch it.

    Can't get my ipad to take videos...since it has the word "video" on the camera app I would have thought it would take videos. -  I touch the spot. ...NO video!  I guess this ipad doesn't have video capability. ??

    Try sliding the words instead of tapping them.

  • Just switched from a charter email to gmail.  i use outlook 2007 and cannot get my mail to sync with my ipad and iphone

    just switched from a charter email to a gmail.  i am syncing fine with ipad and iphone.  But cannot get email to sync through outlook 2007.
    could someone help me?

    How does iCloud have anything to do with this, you have 2 email accounts, neither of them an iCloud account?
    If you want to get Gmail on your iPhone add it to your iPhone. Same goes for Outlook.

  • I cannot get the cellular data account on my ipad.  I have gotten it in the past

    I Have an ipad . I'm trying to get my cellular data turned on and all I get is an error 500-- internal server error; the server encountered an unexpected condition which prevented it from fulfilling the request.  I have no internet service, but I do have wiFi. I have powered down.
    WHen I go to settings>cellular data> view my account I get the error code

    Hi,
    It might also help if you told us what you are doing to try and login which you think is right.
    One definition of crazy is repeating the same actions overs and over expecting different results.
    You could have an iPad that uses a SIM card as well as WiFi.
    You may not then get an alert about not being able to contact the servers.
    You may be doing all the right actions but have a poor and bad internet connection.
    Although it is unlikely the place you are at may be blocking the port Messages uses.
    More possible but also unlikely is that they (it is always "they") are blocking access to the servers by name. (Domain Blocking).
    9:37 pm      Saturday; January 11, 2014
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Q2: I cannot use the Apple support site with my iPad.  Type disappears.  Links don't work.

    Not sure what the deal is here.  It may be related to my Q1, which was my original issue.  Anyway, I tried to access the Apple support communities from my ipad to ask a question.  After I logged in, I noticed that all the text I typed into the query box failed to show up.  The test seemed to actually be there, as evidenced by the spelling suggestions that appeared as I typed, but it was like it was in white font.  The header, or question title was legible, though (I don't have white font on is my point).
    Then, when I tried to "browse communities" in order to pick a community in which to post my invisible question, hoping when it posted it would become visible, no communities would display.  Actually, nothing happened.  The page did not default to the ipad or "using ipad" community.  And when I tapped on the "browse" link, nothing happened. 
    Finally, whenever I pick the "search" function, the word "search" self populates into the search field and I get an entire list of topics that contain the word "search".  When I delete the word "search" from the search field and enter different text (like "imessage") it re-sets to the word "search" and I get the same list of topics that contain the word "search".  IT'S FREAKING ME OUT!!  Like there's a ghost running my device.
    Any suggestions would be greatly appreciated.

    this forum has been very buggy for the past few days. im having similar issues. this weekend was my first visit to this forum so i have no idea if this is related to my new air 2 and ios8.1 or if its on the website side of things. however, site seems to be much more responsive for me today...

  • Use ipad2 to play video on Apple TV but cannot get the video to play on the iPad even though I change setting without shutting down and restarting the ipad.

    I have been using my ipad2 to show video on my flatscreen using the Apple TV.  Recently I find that once I use Apple TV I cannot switch back to the ipad for viewing even if I go back to the little rectangular screen and change the checkmark to ipad.  Once this happens all my videos will only play through apple tv.   If I shut down the ipad and restart it I come up in the ipad mode and can view it on the pad. 

    Welcome to the Apple Community.
    Not really sure on this one, but one thought I have is how full is your iPad. Have you connected your iPad to iTunes recently.

  • My computer with my iTunes is broken.  I have my music on my iPhone 5, but I recently bought an iPad 4 and cannot get the music to go on my iPad .  I need help!

    My computer with my iTunes with my music has been really trashed.  My iPhone 5 has some of the music but I now have an iPad and want my music to be put onto that to play.  How can I do this?

    How to use iTransfer
    1. Launch iTransfer on both devices
    2. Tap "Tap to Connect" on both devices
    3. Select the device to pair and wait for device to connect
    4. Tap "Accept" on the other device
    5. Select Photos, Music or Files to transfer
    6. Tap "Received File"
    7. Select the received file and decide what action you'll like to take e.g. View, Email, Open In

  • Can't get the video camera to work with iOS 7

    Since I updated to iOS 7 I cannot get the video part of the camera to work. I can't even activate the button.

    Swipe up or down to select video option.

Maybe you are looking for