I cannot import a Universe Designer

I can not import a universe because as I try to import the following message is reported:
ha not a file attached to the Universe InfoObject universe
what should I do ....
help me please ...

Login to CMC, check properties on the universe object you are trying to import
Then get the path to the univese which reads like <FileStore Input folder>123/00/xyz.unv
On the server, check if xyz.unv exists in that path
If not, then the .unv file is somehow missing and that is the issue. Guage the impact on number of reports. If needed, If you have an equivalent backup in any other environment or desktop, export it and overwrite or update the universe. Be careful here as you must ensure that the universe file is an equivalent and not too old.
regards,
Shiva

Similar Messages

I have upgraded to Mavericks and I now cannot import DV into FCP through the capture presets.

Since upgrading to Mavericks, I cannot import DV vision through my Sony FX-1E. I have tried various connections - DV to Firewire 400 + 800 with no success. I now have to get the vision ingested at another facility and exported to a hard drive in order to edit.
Is there a way I can get vision into FCP?

FCP (not FCPX) is legacy software, now EOL and not designed or guaranteed to work with Mavericks, some people report no problems others do, it depends on your setup. I'd suggest using iMovie to capture your footage then transfer to FCP to save using (or paying) another facility. An alternative (and my own solution) is a second boot drive with 10.8.5 and FCP 7 which still works OK.

SSO does not work in Universe Designer

Hi,
I have a problem getting an error within Universe Designer the error is :
"DBD: Unable to connect to SAP BW server Incomplete logon data"
Installed below :
BOBJ XI 3.1 installed
SAP GUI 7.10
SAP Java Connector
SAP Integration Kit
All is run on the server machine.
SSO setup i CMS etc. and i works fine in the beginning and i can go into Universe Designer and create a SSO connection which responds etc. and i can create universes which is fine. I can go to webi and create an new report using the universe and select som measures and dimension and execute query, but it only works a couple of times then it starts to fails with an xml error. After that going to universe designer an into connection i cannot longer get in touch with my Bex query in SAP BW ! and that is where my problem allways ends, so now i cannot connect using SSO in Universe Designer.
Found technote 1250890 but it only says that i need to install integration kit on my client, but my installation is all i one and is installed.
Any suggestion would be much appreciated !
Rgds,
Kim

Hi,
I've had this problem to . I found information in trace log by SAP BW side
A Error Code CALL_FUNCTION_SIGNON_INCOMPL.
A Module $Id: //bas/700_REL/src/krn/rfc/absignon.c#9 $ SAP.
A Function isignon_do_it Line 177.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end RX_RFC
M *** ERROR => SosIAnchorArrayCreatable: T17/M0 in state cancel [thxxtool2.c 947]

Error While Accessing Universe Designer

Hi All,
I am facing an strange issue - I have BO Installation on windows server - 2003.
As a client when iam trying to access the server from diffrent location i am able to access CMC and Polestar.
But When i am trying to access universe designer - it shows an error -
Cannot access Repository ( uSR0013)
[repo_proxy 13] SessionFacade::openSessionLogon with user info has failed(Transport error: Communication failure.(FWM 00001)
(hr=#0x80042a01)
Any suggestion.
I am able to telnet my server ip with port 6400 and 8080.
Thanks

I think there is some problem because of firewalls.
Could some one tell me what are the list of ports need to be opned for server client model.
i asked network team to open the ports 6400 -6410 only.
Do i need to open ports ??
My BO server installation is default and CMS is on - 6400. and i haven't configured anything else.
pls suggest the approach.
Thanks

Import repository from Designer concerning non-versioned applications (EA2)

Hello
I've downloaded last version of Data Modeler -> v3.0 EA2 because correcting bug about import from designer for non-versioned applications.
I tried to import from my Designer connection but I can see only versionned applications ! I would like to see all the applications (like in Data Modeler v2). Version 3 EA2 is supposed to correct the problem ?!
The exact version is V3.0.0.653 ! Is that right ????
Thanks to all!

Hello,
On our designer we have ; one workarea and 22 Applications system and several sub-application system. Only a couple on these applications systems are versionned.
I would like to import the 20 applications and sub-applications in Data Modeler but even if I have the Data modeler EA2 I cannot see them ! I was talking about the Data modeler version lattest version (EA2). Is it the V3.0.0.653 ?
thanks regards,
Rocco

BOXI3.0 Universe Design using view or query in SQL

Hi. Alias here.
I would like to know what are the effect to the BOXI3.0 or SQL performance if:
1. We are using view or query in creating the universe?
2. Is it the correct way of creating the universe only from tables?
3. If need to do combination between tables and views?
Hope you all can reply to this matter.
Regards,
Alias

Hi Alias,
Designer has the capability to import tables and views you cna use in the design of the universe. Furthermore, you can also create a derived table in the universe - in simple terms it is much like a view, but the code is in the universe availble to the universe designer.
With all this available to you, it is pretty much up to you how you want to tackle the design. I would say first prise is using the physical tables in the databse, then move to using a view and if there are certain restrictions on the designer, use the derived tables.
Remeber this, at the end of the day, any SQL code generated or used is passed down to the database to be processed, may it be the query from the universe directly on the tables or by means of the views or derived tables - the database server will need to crunch through it all - and this is what will determine your performance.
Regards
Jacques

Unable to find BW Query while creating connection with universe designer

Hi colleagues,
I've got BOE XI 3.1 SP2, Integration for SAP 3.1 SP2 and the following inssue )
Some of BW queries that were previously released for external access and succsefully used for WebI reports now cannot be find while creating a connection in universe designer. Those are still releasde for external access but I'm not able to find some of them in the list, tried search as well.
Has anybody faced the same problem?
Thanks

Hi Ingo
SAP GUI               710 Patch 15
BI Components      7.10 Patch 1001
BW 3.5 Components     3.50 Patch 6
Actually as I figured out there were some reasons to manualy set req.status to 7 for that info-provider
I used massive regeneration for needed queries eventually,
BR Max

Cannot find the Universe (DA0011)

We have Migrated from Deski XIR2 to XI 3.1 FP4, when user either imports the report from the 3.1 repository or open Deski report they imported from the 3.1 repository they are getting the error Cannot find the Universe (DA0011). The user closes complete out of Deski and reopens and the report refreshes.
u2022 We have verified that the universe in the CMS as it was part of the migration
u2022 We have also verified that the user has security to the universe
Any help would be appreciated

Hi Brad,
Thank you for the feedback. I had opened a case and was indeed hoping to be able to refer to yours. We were also facing this on our clients and there they gave us a workaround. Our universes folder on the clients points to a mapped networkdrive, by rewriting this path in UNC notation (so \\server\path...) this seemed to solve the problem.
What we also noticed was that the error on our clients only occurred the first time the deski application was started on the PC after reboot, refreshing the universes list in the universe panel or a restart of the application solved this.
So on the server I was thinking there might be a similar situation occuring. But I have to find a way to reproduce this.
If we ever get a solution for our problem I'll update this thread.
Regards
Guy

URGENT: Connecting BPC 10.0 with BI4.0, with Universe Design Tool

Hi all,
I have quite an urgent question that I need some guidance from all you SAP gurus on!
Is it possible to connect BPC 10 to BI4 using Universe Design Tool? We are under the impression very few people have connected these pieces of software together, if at all. It is very important to a Project I am on at the moment as to whether it is possible so any advice would be very much appreciated.
So far we have done..
Software is installed - Universe Design Tool (UDT)
Logins have been created for BPC 10
Opened up UDT and go through the Wizard;
Connection name is BPC CCONNECTION
Select data access driver: Business Planning and Consolidation OLE DB for OLAP
Enter the server address for BPC 10 (This is the URL that we log in to the BPC Admin Console)
After we try to continue, we get the error as follows:
[Image of error|http://s9.postimage.org/pxk8raci7/UDT_Screen1.jpg]
If anyone could give any kind of advice I would really apprecaite it!
Nick

Hi Nick,
If you are trying to connect BPC 10 NW to BI 4.0 then I have some suggestions. We did this in our SAP EPM 10 training. In the Admin go to the model tab , select your model and edit it. Select the check box Use as a source. This creates a transient query in the backend.. Then we designed the connection in IDT (Information Design tool). Login to IDT and create a new project. Now Right click on the project and create a new OLAP connection. Select SAP BICS as driver selection. Provide the server details and user aunthetication. Select specify a cube in connection option. Now You can select your model <MODELNAME>_B folder and u will see one query with /CPMB/TQ_XXXX. Test your connection and publish your connection to repository . Now you can use this connection for creating Interactive Analysis (Webi Report). I am not sure about the reporting client you wish to use.
Hope this Helps
Regards
Nikhil

AS/400 Member Tables and Universe Design

Greetings!
Anyone have experience dealing with AS/400 "member" tables in Universe Design? Is there any special trick to importing them to the UNV or is that even required for a report query to access them?
Thanks in advance.

Hi Kevin,
Did you get an answer for your question. Actually I had the same question from a customer who wants to know if we support data on AS/400.
Are we using ODBC for that?

Universe Designer Hangs while saving

Hi Experts,
Universe Designer hangs while saving a universe design.
Earlier it was working correctly and suddenly I am facing this issue. I restarted my system couple of times and there was no luck. The designer application works as expected and only problem is it hangs while saving.
In eventviewer, I have following message
Event Type: Error
Event Source: Application Hang
Event Category: (101)
Event ID: 1002
Date: 12/27/2010
Time: 3:23:07 PM
User: N/A
Computer: CHANGED
Description:
Hanging application designer.exe, version 12.1.0.882, hang module hungapp, version 0.0.0.0, hang address 0x00000000.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
What could be the cause and how to solve this? Any clues appreciated.
Regards
B Ravi Shankar

This happening for all universes. I face this issue even when I import a Universe from CMS and save.
Finally this problem got solved by restarting couple of times. My guess is that it could be due to no of concurrent connections exceeding(Using EDGE 3.1 in 5 CAL evaluation). When I brought down to session count to 2, it is working.
Thanks for quick reply.
With Regards
B Ravi Shankar

BO4 - cannot create new universe connections

Hi,
In Universe Design Tool, trying to create new universe connections but not allowing this.
Doesn't show all the data access drivers we have installed.
Can migrate connections fine from XIR2 fine and reports run O.K
Why cannot create new universe connections
Many Thanks

Hi,
there are some notes about this in the knowldge base. Here are a couple:
For ODBC, Note 1272557 - Data Access Drivers missing while creating a new connection in Designer
for JDBC, Note 1481410 - JDBC Drivers do not appear in the List Of Drivers when Creating a New Universe Connection in Universe Designer
Can you hit www.service.sap.com/notes to look them up?
Regards,
H

Universe design for SAP BPC (MSAS cube)

During the designing of a Universe on top of a MSAS cube there is the moment I may select Dimensions & Hierarchies. Here there are ID's of my model, e.g. Accounts-Lev1, Time-Lev1, etc.
How do I get to see the descriptions of the levels in the Universe Designer?
Screenshots:
http://s772.photobucket.com/albums/yy7/Thijxx/

Hi SR,
In some way is true what you think, is important to put effort and intelligence in design very well the Bex query also the BW solution.
But the effort is not only there, you can improve that with a good Universe creating MDX Measures, changing the BW names (Dimensions and measures) for other more comprehensives for the users, change and reorder the classes and dimensions to be more close to user concept, create new hierarchies and others.
Don't forget that the Universe is a semantic layer to hide complexity and is useful for:
- Map complex data into familiar business terms such as products, customers, and sales.
- Enable simple, intuitive, and self-guided data analysis.
- Guarantee single version of the truth (identical results) no matter what tool is used)
Some tips are:
You do not need a BE query for every report and you do not need a Universe for every existing BE query
Focus the implementation strategy on limiting the number of Bex queries and Universes that share common elements
Build a small set of Bex queries focusing on sharing common elements in a small number of Universes
Understand that primarily the WebI Query Panel definition influences how much data is retrieved from BW, and not the BE query design or the WebI Report layout, In some situations extremely large queries and universes can adversely affect performance
Removing / Hide Unnecessary u201CL00u201D Objects
Removing / Hide Unused or Redundant Detail Objects
Remove all prefixes « Lxx ». Copy the initial name in the Description of the object
Rename the attributes (Detail objects) when necessary : remove the suffixes when no Business signification
Optimizing Detail Object Syntax
I hope this help you.
Best Regards
Edited by: Federico Sperling on Jun 18, 2009 8:36 PM

Can I link a query with an Excel file without using universe designer?

Post Author: nicmac3030
CA Forum: WebIntelligence Reporting
I have an Excel file that contains a list of 200 seller codes. The list is updated on a weekly basis.
I need to create a query in Webi that shows ONLY those records in our main table that match one of the seller codes on the Excel list.
Is there an easy way of doing this? I don't really want to hassle our universe designer guy with a new file to import every week. But if that's the only way to do it, we will have to.
Back in BO v5 we used an Excel macro to add all the codes into a long text string with commas & pasted that into the query designer. Unfortunately there are many queries that need to be updated, so hopefully there's a way to automate this.
Thanks for your help. Cheers, Nick

Post Author: jsanzone
CA Forum: WebIntelligence Reporting
Nick,
You don't mention what version of BusinessObjects that you are using. If you are going to adopt XI 3.0 sometime soon, then you will have a definite capability of doing what you want with a new product included in 3.0 called "Rich Client". At this moment I can't think of any other way to achieve what you want other than RC. You can read more about RC at the Business Objects docs web site, here: http://support.businessobjects.com/documentation/product_guides/boexir3/en/xi3_web_intelligence_rich_client_en.pdf

I cannot import photos from my Cannon PowerShot A80

I cannot import photos frpm my Cannon PowerShot A80. I have imported many photos from this camera in the past. I get an unrecognized fromat error message.

Welcome to Apple Support Communities.
Sounds like the camera memory card (CompactFlash) contains one or more corrupted image files.
If the images are not important, you may be able to correct the problem by reformatting the memory card with the camera setup menu. Of course that will destroy any images currently on the card.
If you choose to do that, quickly do a few test images and try importing them to verify that the card was successfully reformatted and that the test images can correctly be imported.
There are utility programs designed to recover images from flash memory.
One of my flash cards came with a free one (for Windows) that I use.
Of course there are also paid programs and data recovery services.
A quick search revealed this link. I downloaded, installed it, and recovered a deleted file, but I have not used the free version extensively, so I cannot vouch for it, or the paid upgrade.
http://www.easeus.com/mac/mac-photo-recovery-free/
Message was edited by: kostby

I cannot import a Universe Designer

Similar Messages

Maybe you are looking for