I cannot import any files into iTunes

When I try to add a file to iTunes by dragging it over the iTunes window, iTunes simply does nothing, no error message, no failure, the file simply isn´t copied into iTunes. Same applies when I try to select a file via the mediathek importer (shortcut cmd+O).
I has worked before but then I upgraded to version 7.7.1 and now it simply doesn´t anything. Does anyone have the same problem?

I'm having the same problem.
For over a week now, I have not been able to import songs into my library by dragging them on to iTunes. Whenever I do, I get the following message:
*"Attempting to copy to the disk “XXXX” failed. You do not have enough access privileges for this operation.*
*iTunes could not save to your Music Folder because you do not have write access. Check the permissions on your Music Folder and folders in your Music Folder, then try copying this file again."*
I can still buy and play songs from iTunes, or import from a CD – but if it’s a music file from somewhere else (like a digital album I bought straight from a band’s website, and NOT through iTunes), then it won’t allow me to import it to iTunes. I was able to do it a few weeks ago, but now I get the above error message. Since then I have upgraded to iTunes 8 — however the error message started happening right before that, so it can’t be that. The one major thing that has happened to my computer since then, and which I think could possibly be the culprit here, is detailed in this thread:
http://discussions.apple.com/thread.jspa?threadID=1686803&tstart=0
Basically I was having trouble accessing my account, and I had to delete it and rebuild it. I’m pretty sure the problem with importing music files happened after that.
I looked online for ways to fix this problem, but none of the suggested solutions have worked:
I made sure my Music Library folder, and ALL the folders within, had “read & write” access for my account, but that didn’t work.
I used Disk Utility to perform Repair Permissions, but that didn’t work either.
So I’m at a loss for what else I should do. Any suggestions?
(FYI — my music is all located on my external hard drive).
Message was edited by: Anton Kawasaki

Similar Messages

Cannot import WAV files into itunes with 8.01!

Although I see posts in this category, this question has not been answered. iTunes 8 and 8.01 have lost a critical capability compared to iTunes 7. I have an Olympus digital voice recorder that I like to download to my ipod. I could do this before 8.01! Now I cannot!
Are you working on a solution?

Check out this thread:
http://discussions.apple.com/thread.jspa?messageID=8645977&#8645977

I can't import any songs into iTunes.

I can't import any songs into iTunes. I can drag and drop but nothing will happen. Songs show up when a search is done but songs cannot be played or located in iTunes. I think this has something to do with the recent update because I have songs imported into iTunes from December.

I found the problem. I have VMware fusion that is hosting Window XP on the iMac. When the fusion is running the CD player is not seen in OS. By quitting Fusion I can now insert a CD and the disk icon appears on the OS screen. Now I can bring up iTunes and import the audio and continue as before. The one exception is I cannot bring in a photo of the album cover as before I have to drag the photo out of iPhoto and onto the desk top. Then I can drag it into the artwork patch in the iTunes/ info window.

How to import Flac files into itunes

Hi there,
the title say it all. How can I import Flac files into Itunes?
I have a lot of them. I click onto add to library select the flac file, click on open and nothing happen.
Many thanks for your help.
regards

Hello CESNET the best bet is to try http://blowintopieces.com/fluke/ I myself don't use Flac files but to any audiophile it's important to hear sound at it's best. Also WAV or AIFF & ALAC you will need to use http://tmkk.hp.infoseek.co.jp/xld/index_e.html to convert into ALAC.
P.S. their is also a simple FLAC player but can't remember it one more thing converting FLAC to WAV will not give you full TAGs. Best bet is to try just one file you've copied ether straight into iTunes or convert & see what's best for you.

I can't import mp3 files into iTunes

Just recently, I find that I can't drag/drop (or import) .mp3 files into iTunes (12.1.0.50).
I did confirm that the files aren't locked.
Any ideas? Thanks!

No mp3 files from any source, including iTunes itself, or just some particular batch of mp3s files from some unspecified source? It isn't unusual for some encoders to produce mp3s that are not compliant with iTunes. You can try using the application MP3 Scan+Repair (http://triq.net/mac/mp3-validator-mac-os-x) to fix them but sometimes you have to re-encode them. Try playing with Quicktime Player instead and report if it will play the files.
Oh, it also isn't unusual that files do not have labels built in. They are adding to iTunes but not ending up where you expect them to be.

Cannot import any files on Lightroom 4.2

I have been having problems with importing all files to Lightroom since my Macbook was 'healthchecked'!! I get the message 'cannot read files'.
This started with Lightroom 3 - where I have tried to delete the preference file and then recreate - no luck, after alot of other things tried, I then
uninstalled Lightroom 3 and installed a fresh version of Lightroom 4.2 - and the problem still exists.
I suspect it is a configuration problem but am not technical, so I need some non-techie suggestions please, I am getting very very frustrated!!
Can anyone help, please.

Victoria,
Thank you for you reply, it must have been something to do with the
permissions of the folders as I just decided to create a new folder as
the destination folder and that worked!!
So thank you so much, I just now need to organise all the photographs.
Lesley
Original Message----
From: [email protected]
Date: Dec 5, 2012 19:10
To: "Laney_Nordey2"<[email protected]>
Subject: Cannot import any files on Lightroom
4.2
Re: Cannot import any files on Lightroom 4.2 created by Victoria
Bampton in Photoshop Lightroom - View the full discussion
Which folder are you setting as the Destination, for the files to be
imported into? Does it work if you set it to, say, Desktop?
That "cannot be read" error message more often means "cannot be
written" (yes, I know, that's stupid!!!), so it's probably a folder
permissions issue.
Please note that the Adobe Forums do not accept email attachments. If
you want to embed a screen image in your message please visit the
thread in the forum to embed the image at http://forums.adobe.
com/message/4899074#4899074
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [http://forums.adobe.
com/message/4899074#4899074]
To unsubscribe from this thread, please visit the message page at
http://forums.adobe.com/message/4899074#4899074. In the Actions box
on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe
Community
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.

I cannot import any video into my Lightroom 5.4 (last version updated) for MAC

I cannot import any video into my Lightroom 5.4
(last version updated) for MAC
in the beginnig it was working, just after installation and update... now nomore...
I use .mp4 files
Already tried to use a new catalog, clean caches, and reinstalling
the error says "was not able to import video files"
thanks

Arghhh! A big thank-you to hhps-photo, you just solved the myth bothering me for the last 2 months!
I recently upgraded to Lightroom 5 from 4 and could not import any video. But when I downgrade to LR4 it worked again. I've tried so many other solutions suggested in the forum but none worked including cleaning cache, install divix plugin, install 32 bit version etc. Finally - it's because I blocked LR5 connecitons in my firewall !!!
So simply allowed LR5 internet connection in my firewall settings and LR5 worked like a charm!
Kevin

Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working

Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working.
I have tried reseting to factory settings by removing battery and holding down the power switch for more than 5 sec but this does nothing.
Any ideas would be greatly appreciated as I think with so much unwanted data on the desktop and other places the whole os will crash very soon.
Thanks, Rick

The hard drive may be dying anyway, or the directory damaged because it is so full. You should never let the hard drive get over 85% full.
A -36 error is a read/write error.
All you did with the power is reset the SMC. Does nothing to reset everything to factory settings.
Do you have your original 10.4 installer discs for the MacBook?
Is your data backed up?

How import flac files into itunes

how do you import flac files into itunes on a mac?
thx

click here for information.
however, you could also convert the FLACs to Apple Lossless files. either of these free apps can do that for you.

Since updating iTunes and Mavericks, every time I import m4v files into iTunes it renames all the files to "Avidemux". what's gone wrong?

Since updating iTunes and Mavericks, every time I import m4v files into iTunes it re-names all the files to "Avidemux". what's gone wrong?

(By the way, would I need to use also the red and white phono cables also to get sound?)
Yes, S-video cables do not carry sound.
When you import 16:9 into DV Widescreen, make sure that you have UNchecked 'automatic letterboxing'.
In Preferences, is the project set to the correct standard?
29.95 fps = NTSC
25 fps = PAL.
BTW, this is actually the iMovie 5 forum, but no matter!

How to import WMA files into iTunes to burn to CD?

My coworker gave me a voice recorder that records in WMA files. I cannot simply drag the audio file into iTunes like I have from other recorders. I need to get the audio into iTunes so I can burn to CD. Any ideas?

Problems -
EasyWMA is not free.
Switch looks fine, but after installing the wma plugin as prompted, and feeding it the first batch of .wma files, it crashed.
I'm now 'borrowing' an EasyWMA.
Pros : simple to use. you can have it process your entire music folder at once. adds songs to itunes right away.
Cons : limited functionality! E.g. there's no option for VBR (variable bit rate), so I set it to 256 fixed. E.g. when having it run through my entire music folder, there was no option to restrict it to wma files - it also worked my flac's, for which I'd already found a better solution (fluke).
Sigh Hate to complain, but hey, this stuff would be easier on Windows

Cannot import PDF files into iPhoto 4.0.3

Is it possible to import PDF files into iPhoto 4.0.3? I can't drag and drop them into iphoto folders without the "Unreadable Files" error. I have tried importing them through the iPhoto menu and still get the same results. I have tried importing the PDF files from several places such as my desktop because I wondered if the location of the original made a difference, but that doesn't seem to help. I didn't find anything when I searched for this problem here in the forum so I wondered if anyone else is having the same problems.
Any help would be appreciated.
Thanks,
Morgan

No because I had iPhoto 4 open and tried to run the Save PDF to iPhoto on a book in that library. I think it's just the different data structure, etc.. It's just not compatible with Automator or at least that particular workflow. I tried printing to PDF from V4 and then do the Save to iPhoto from Preview with V4 open and I still get the error message. So iPhoto 4 is just not compatible with that workflow.
A workaround is to create a PDF file of the whole book and then manually save each page as a jpg file and import those. That's what I did for my first book. You could do a screen shot of each page in the preview mode and use those but the resolution will be limited to screen resolution, 72dip. You will get resolutions on the order of 150-200 dpi thru the Save As route in Preview or the Save to iPhoto automator method.
I'm sure you could create an Automator workflow that would take the PDF file and save each page as a jpg file and name it sequentially. I'll have to take a closer look at Automator soon.

Can't import .m4r file into iTunes 10.0.6.40

Hi. I have a new iPhone 4S with AT&T (first iPhone ever!) and I'd like to create a custom ringtone. I have an .m4r file that is 29 sec long. I'd like to use it as my ringtone. Should be easy enough, right? I've tried dragging and dropping my file into iTunes, and also tried importing it through the menu, but it won't import. I can double click on it and play it in iTunes, but it doesn't import it into the library. Also, I have no RingTones folder. Do I need to create one somehow, and how would that work?
Thanks!

Okay, I wrote up a tutorial on what I did to make my own custom ringtones so that other newbies don't get confused.
http://9patch.wordpress.com/2012/03/26/make-a-custom-ringtone-for-iphone-4s/
Hope this helps!

Cannot import any pictures into iPhoto 5

A customer has an iMac/G5/1.8Gig running 10.3.9 and iPhoto 5.x. All worked fine until a few weeks ago, when it would not accept any jpg's that she would try to import into her library. I have removed all her pictures from the library, trashed all prefs, caches and settings, basically starting fresh. I try to bring in her old iPhoto pics, jpgs, whatever, but I get an error for every single item. I can open all these pics in picture viewer fine. I have run Diskwarrior and fixed premissions, no change. I even created a new user account and tried, same thing.
HELP!!
iMac G5 Mac OS X (10.3.9) 256 MB RAM

Julie:
Where are those pictures located when you're attempting to import into iPhoto? Are they physically located inside the iPhoto Library folder? If so then that's the problem. iPhoto will import any file that's inside its folder. Move them to the desktop and try importing again.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application, iPhoto dB file backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar

Importing .midi files into iTunes library

Hello! Can anyone please tell me how to import .midi files into my iTunes library, then convert those files into .mp3 to burn onto a CD?
Thank you for your help!

Does this midi file play elsewhere?
I am getting the file from another location on my hard drive, not from a CD.
Doesn't matter. File -> Add file to library will work if the file is compatible.
Also, when trying to change the import settings, it seems to be for importing from a CD, not from another file location.
It is for importing or converting.

I cannot import any files into iTunes

Similar Messages

Maybe you are looking for