I cannot install itunes because of an error while trying to create directory H:\Program Files why is this happening

I get this message when trying to install itunes, I have tried just about everything but nothing works. I have wiped ALL traces of itunes and started again...no luck...iI tried a 32bit instead of a 64 which is what my pc is rated for...no luck...it was all due to the latest version being released so I tried to upgrade but nothing works. Not even rolling back to a previous version is working.
Any ideas????

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Similar Messages

An error occured while trying to create directory C:\Program Files\Common Files

iTunes and Quicktime kept giving errors when trying to update so I tried to uninstall and re-install but I get the same error and now don't have iTunes. I get multiple errors for c:\program files\common files\apple\apple application support\webkit.resources\ru.lproj and c:\program files\common files\apple\mobile device support\com.apple.windowsmail.client.resources\pt.lproj\localizable.strings. Verify that you have access to that directory.I have tried clearing cache, cookies, etc. Also tried to remove those files but I get another error. I have full administration rights and turned off all security. Any ideas???

I get multiple errors for c:\program files\common files\apple\apple application support\webkit.resources\ru.lproj and c:\program files\common files\apple\mobile device support\com.apple.windowsmail.client.resources\pt.lproj\localizable.strings. Verify that you have access to that directory.
I have tried clearing cache, cookies, etc. Also tried to remove those files but I get another error.
That's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive. There's XP instructions in the following document: How to perform disk error checking in Windows XP
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

I Cannot install itunes because of an error (-42404) Can anyone offer a solution please?

I cannot install itunes because of an error (-42404) Can anyone offer a solution please?

A search of the forums would be a good place to start.
Also, check out the "More Like This" section to the right.
Amazing what a little effort put forth will reveal.

Quicktime 7 will not install fully on my windows 7 64 home premium keeps stoping with an error while trying to create directory

I have a Laptop with Windows 7 64 Home premium, I have tried a few times to install Quicktime 7 on my laptop. But keeps stopping with an error saying "An error occured while attemping to create the directory: C:\windows\Installer\{F5266D28-E0B2-4130-BFC5-EE1-55AD514DC}
Windows is fully up todate, I have no virus or anything harmful on my computer. After clicking retry the error keeps popping up. I then click on cancel and delete the downloaded quicktime installer. I shut down my computer and try again. Same error with not luck. Any help?

Just in case, let's check for disk/file damage.
The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

I cannot install itunes because of an older version of bonjour that I cannot delete.

I cannot install itunes because of an older version of bonjour that I cannot delete.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Getting error while trying to create the push certificate...

I am getting the following error while trying to create a push certificate for the mdm from the apple site.
Certificate Signature Verification failed because the signature is invalid.
I am mdm vendor as well as the customer. I did the following steps.
openssl x509 -inform der -in mdm_identity.cer -out mdm.pem
openssl x509 -inform der -in AppleWWDRCA.cer -out intermediate.pem
openssl x509 -inform der -in AppleIncRootCertificate.cer -out root.pem
openssl req -inform pem -outform der -in customer.csr -out customer.der
created the plist_encoded file using a java program which uses the "SHA1WthRSA"
When i tried to upload the plist_encoded file to the apple site (https://identity.apple.com/pushcert/), it creates a file with the following error
{"ErrorCode":-80018,"ErrorMessage":"Certificate Signature Verification failed","ErrorDescription":"Certificate Signature Verification failed because the <a href=\"http://www.apple.com/business/mdm\" target=\"_blank\">signature<\/a> is invalid."}
Any help would be greatly appreciated....

Please see the solution in (The Descriptive Flexfield With Application Name Receivables (AR) and Name Party Site Information (HZ_PARTY_SITES) Is Not Frozen [ID 743262.1]).
Thanks,
Hussein

Error while trying to create tree using same EMP how to tutorial

Hi,
I get the following error while trying to create a sample tree similar to the one
posted in the how-tos web page.
The final query that creates the tree is also as follows
The Current Query shown in my apex window and the one on the howtos tutorial is as follows
select "EMPNO" id,
"MGR" pid,
"ENAME" name,
null link,
null a1,
null a2
from "RJOSEEMPCLUB"."EMP"
where DEPTNO = 1
The error is as follows
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
Debug:
1: begin
2: wwv_flow_wiz_confirm.create_tree (
3: p_flow_id => :FB_FLOW_ID,
4: p_region_template => replace(:F4000_P112_REGION_TEMPLATE,'%'||'null%',null),
5: p_start_option => :F4000_P112_START_OPTION,
6: p_owner => :F4000_P112_OWNER,
7: p_table_name => :F4000_P112_TABLE,
8: p_id => :F4000_P112_ID,
9: p_pid => :F4000_P112_PID,
10: p_name => :F4000_P112_NAME,
11: p_link_option => :F4000_P112_LINK_OPTION,
12: p_link_page_id => :F4000_P112_LINK_PAGE_ID,
13: p_link_item => :F4000_P112_LINK_ITEM,
14: p_where => :F4000_P112_WHERE,
15: p_order_by => :F4000_P112_ORDER_BY,
16: p_page_id => :F4000_P112_PAGE_ID,
17: p_page_name => :F4000_P112_PAGE_NAME,
18: p_tab_set => :F4000_P112_TAB_SET,
19: p_tab_text => :F4000_P112_TAB_TEXT,
20: p_region_name => :F4000_P112_REGION_NAME,
21: p_tree_name => :F4000_P112_TREE_NAME,
22: p_tree_type => :F4000_P112_TREE_TYPE,
23: p_max_levels => :F4000_P112_MAX_LEVELS);
24: end;

Hi Kart,
If you have the sample EMP table, the DEPTNO values are 10, 20 or 30.
Did you specify a root value for the tree?
Regards
Andy

Error while trying to create a new company

Hey All
I found an error while trying to create a new company.
the Error like - No matching Records Found - [ODBC -2028]
This can generate only database but not any tables in that database.
Please help me.
Thanking you
Hepil Doshi

Hello,
I would prefer local language instead of US english.....
My tips.
1. DID you tried to Not apply the UDO/UDF things?
2. Do not log in to the database, start from
3. Please post the error message itself....
4. If you are running on MS SQL 2005 server (not express) , You can start SQL profiler, and monitor the New Database creation.... you will see in profielr where is the error message and which tables / data is missing.
If i know well,
When you create a new company, the SBO-COMMON database is used to deploy the new database....
If you get stock, reinstall your sbo-common from the last applyied patch..... (Detach SBO-common, move the files another directory, and start upgarder.exe).
Regards,
J.

JCO.Server Error while trying to execute a RFC program from SAP

Hi,
We are connecting to an external registered server program from SAP via Web Methods.
The external server program is registered with the SAP Gateway. We have created a TCP/IP RFC destination and are able to connect to the destination successfully via SM59.
An RFC function is created in SAP and is called using the syntax CALL FUNCTION "/NGN/BAPI_STRE_SEARCH_PROCESS" DESTINATION 'PRDB2B'. We have also handled the COMM_FALIURE and SYSTEM_FALIURE exceptions in the function call.
We are monitoring the gateway via SMGW and see a connection log to the RFC destination as below
Number - 10
LUname - dev01
TPName - sapgw00
User - KRAORANE
Status - CONNECTED
Symbolic - PRDB2B
Conversation - 86520353
Prot - REG
SAP return code - 0
CPIC rtn code - 0
The external program returns results as expected.
However sometimes the RFC fails and returns the message JCO.Server could not create server function /NGN/BAPI_STRE_SEARCH_PROCESS.
We are not able to figure what exactly is causing this error. Any help will be highly appreciated.
-Kiran

Hi,
Please see the below links..
JCO.Server Error while trying to execute a RFC program from SAP
Re: JCO.Servcer could not find server function
Re: JCO.Server could not find server function 'SET_SLD_DATA'
/people/kathirvel.balakrishnan2/blog/2005/07/26/remote-enable-your-rfchosttoip-to-return-host-ip-to-jco
Re: interfacing SAP with an existing java applications
http://help.sap.com/saphelp_nw04/helpdata/en/47/80f671ee6e4b41b63c0fe46bd6e4f8/content.htm
http://www.sapgenie.com/faq/jco.htm
Regards
Chilla..

HT3775 everytime i m trying to play any movie be it an AVI file or MPEG file, it says quick time cannot play this file. why is this happening ?

everytime i m trying to play any movie on Quick Time be it an AVI file or MPEG file, it says quick time cannot play this file. why is this happening ? Abhijit

Follow the steps to identify the video and audio
format, then look in the list for a codec.
http://insanityflows.net/archive/index.php?title=Quick
Time
JulieJulieJulie,
which file do we download? There are five types of file:
XviDComponent_Srcv0.5.1
XviDComponent_Binv0.5.1
XviDAvi_Import_Preview4src
XviDAvi_Import_Preview4ppc
XviDAvi_Import_Preview4intel
Thanks

I just purchased product, while trying to install its saying my serial number is invalid. How can I verify? Why is this happening?

I just purchased product, while trying to install its saying my serial number is invalid. How can I verify? Why is this happening?

tthis happened to me today too!!

Cannot install iTunes because of Windows Installer Package

Cannot install iTunes on Windows 7 because of Windows Installer package is missing.

Okay. Even though you're getting a different error message, try the procedure from the following user tip:
"The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems

Cannot install itunes because old version will not delete

When installing itunes I get an error message tells me the the older version of itunes cannot be deleted. I can not find any older versions of itunes on my PC to delete. Please advise
Thanks

Go into your Control Panel -- Add/Remove Programs
If iTunes is listed, click on it, and click remove
If QuickTime is listed, click on it, and click remove
Go to C:\Program Files\
Delete your iTunes folder
Delete your QuickTime folder
Download and install the Windows Installer Cleanup Utility
http://support.microsoft.com/kb/290301
Launch the utility (start -- all programs -- windows install cleanup)
If iTunes is listed, click on it, and click remove
If QuickTime is listed, click on it, and click remove
Empty your temp directory (follow the link in this article)
http://docs.info.apple.com/article.html?artnum=93716
Restart the computer
Download and install iTunes
http://www.apple.com/itunes/download/
CG

Yahoo email account on iphone 4s error message MFMessageError Domain error 1032 keeps coming up trying to log into my email. Why does this happen?

I'm trying to log in to my yahoo email account on iphone 4s and the error message MFMessage Domain error 1032 keeps on coming up. Why is this happening and how can I fix it?

What worked for me was resetting my password on my email then rebooted my iPhone 4S.

Error while trying to create IPTSession object in ALUI Portlet

All,
I'm creating a IPTSession object using the following code in a ALUI portlet. (I'm using server side API for some reasons)
#1 PortalObjectsFactory.Init(OKConfigFactory.createInstance(ConfigPathResolver.GetOpenConfigPath(), "portal"));
#2 IPTSession ptSession = PortalObjectsFactory.CreateSession();
When the #2 is getting executed, i'm getting stange error,
com.plumtree.openfoundation.util.XPException
Attempt to initialize a SearchService that has already been initialized.
any idea why is this happening? i was not getting this error before. suddenly it started happening. any help would be useful

Here is the complete stack trace... I couldn't understand why this error is happening....
Attempt to initialize a SearchService that has already been initialized.
com.plumtree.openfoundation.util.XPException: Attempt to initialize a SearchService that has already been initialized.
     at com.plumtree.openkernel.impl.search.SearchService.Init(SearchService.java:72)
     at com.plumtree.server.impl.core.InternalSession.Init(InternalSession.java:158)
     at com.plumtree.server.PortalObjectsFactory.Init(PortalObjectsFactory.java:53)

I cannot install itunes because of an error while trying to create directory H:\Program Files why is this happening

Similar Messages

Maybe you are looking for