I cannot install itunes in vista home premium 32 bit

i cnoot install itunes 10.4 in vista 32 bit. pl guide

See Troubleshooting issues with iTunes for Windows updates.
For downloading issues see the further information area and use a different browser and/or the direct links.
tt2

Similar Messages

ITunes on Vista Home Premium 64 bit

I had planned on never owning a Windows machine again let alone one running Vista. I found that I missed Windows somewhat and bought a new laptop running Vista Home Premium.
I tried installing iTunes on this new laptop and got the warning that it wasn't made to run on 64 bit OS, that I should download the 64 bit version. Is there one?

Yes, now it's letting me download the 64bit version. When I posted my message above, it wouldn't let me.

Cannot install itunes 11.1.3 to my windows vista home premium 32-bit. After it finishes the download that it verifies the file I get a message saying "this file cannot be downloaded". What could the problem be??? I uninstalled my itunes and tried again

Cannot install itunes 11.1.3 to my windows vista home premium 32-bit. After it finishes the download that it verifies the file I get a message saying "this file cannot be downloaded". What could the problem be??? I uninstalled my itunes and tried again and keep getting the same message. Please help !

See Troubleshooting issues with iTunes for Windows updates.
For downloading issues see the further information area and use a different browser and/or the direct links.
tt2

Tx2517ca From Windows Vista Home Premium 32-bit to Windows 7 Professional 32-bit

Hi Everyone,
I have a very specific question. I currently am running Windows Vista Home Premium 32-bit, but I want to use Windows 7. However, I want to use Windows 7 Professional 32-bit (rather than Windows 7 Home Premium) and understand that this will require a clean install.
Before I purchase Windows 7 Professional, I want to make sure that this can be done correctly. Does anyone know if this is possible or have already done this?
I have downloaded and ran Windows 7 Upgrade Advisor which told me that I would be able to upgrade to Windows 7 Home Premium or Ultimate, but it does not mention Windows 7 Professional at all. I'm assuming this is because it would require a clean install.
Thanks for your time,
Lauren

thanks ... I see now from your other post that you're probably getting either a "missing QuickTime.msi" message or being told that a "newer version of QuickTime" is installed when you try to go ahead and uninstall QuickTime after you're told about the Key?
Unfortunately, these sorts of msi-related troubles have gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly this time?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

Unable to scan and communicate with scan function C6180 Vista Home Premium 64 bit Printing works

I have an all in one C6180 Photosmart connected by wireless network (infrastructure). Network consists of 2-laptops, 1-Desktop and the printer. Everything works from HP solution Center on the Compaq laptop and the Dell desktop both running Windows XP. My newest laptop is a Dell studio XPS core2 2.4ghz running Windows Vista Home Premium 64 bit. I am unable to scan from the Dell Laptop using HP Solution Center nor can I scan from the printer buttons to the laptop. Solution Center opens I select "scan document" and immediately get an error message "unable to communicate with scanning device. Likewise with the copy function. The laptop does recognize the printer though and I am able to print wirelessly. All functions work when connected via USB so I believe the printer is fine. I have been working with this problem since I bought the printer in 2007. I spent many hours reading hundreds of internet posts, talking by phone with HP and via e-mail support from HP. I became frustrated and gave up for awhile but now I want to see if there are any new solutions that I don't know about. I downloaded full feature software and drivers for the 6180 from HP and performed various levels of uninstall (L1, L2, L3, L4). I also cleaned the registry with ccleaner, windows disk cleanup and manual registry deletions when allowed per HP. I have checked port settings, tried stopping HP functions is Services.Msc. The Digital monitor is currently running, however no scanner communication-computer to 6180 and no scanner communication 6180 to computer. I can print and fax from computer wirelessly. I have ran the HP diagnostic utility separately and it appears everything is fine, connection IPaddress etc. During install when prompted to run test it says the printer is connected to the network. I have tried to add a device to the network after install and get the message no wireless devices found. The scanner does not appear under Cameras and Scanners in control panel. Nor will it find the scanner when I try to add device. Firewalls and antivirus have been turned off. Still can't make it work. Suggestions please.

Sorry about your pain. L3 uninstall is what I recommend. Re-install from hp.com and this time, with the printer properly attached it should flow OK.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Ipod classic compatible with Vista Home Premium 64 bit

Hi,
Is the Ipod Classic compatible with Windows Vista Home Premium 64 bit?
I found out the hard way that the Itouch is not!
Greetings,
Miguel

If I could I would answer your question.
But I do not know how I did that.
Itunes has been working since day 1 on my 64 bit machine, only problem is that it takes half a minute to copy album cover art to song in itunes, the computer is hanging for 15 seconds before the album cover art is copied.
I just took the Ipod out of the box and connected it to the computer and it worked fine.
Only problem that I had yesterday is that when I'm intergrating album cover art my hard disk is doing strange things.
Just yesterday, my RAID 1 was corrupted by Itunes, first hard disk 1 was failing and an hour later hard disk 2 also crashed.
Was able to reconnect them into RAID 1, luckilly.

Nvidia GeoForce Go 7600 graphics driver and IQ770 with Windows Vista Home Premium 32 bit edition

I have been having problems with my screen for several months now: every so often, for no apparent reason, it loses some of the pixels. I can still read the items on the screen, but the resolution is trashed. It happens intermittently and then goes back to normal. I have tried uninstalling the graphics driver and letting the computer go find it on a reboot. This does not work. I have also tried installing the original graphics driver. This does not work either.
If I look in the "Problem Reports" area in Control Panel, there is a graphics related error:
Error Message: STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER (Q293078) The resolution listed is to reinstall the device driver (which I've tried dozens of times without success) or to change the computer's performance settings, which also does nothing. I still get the occasional loss of screen clarity which returns to normal all by itself.
Is anyone else seeing this problem? Does anyone have a resolution?
I have tried the latest graphics driver available on the hp website, from 8-2008 as well as the originally installed version from January 2007. The version of Windows is Vista Home Premium 32 bit edition, Service Pack 1.
If I completely uninstall the graphics driver, and do not reload any, the screen performance is fine, but then there are other problems, such as graphics acceleration.
Thanks for your help.

For the IQ700 series
If you're running Windows Vista SP2, there is a patch for USB patch for NVIDIA chipsets
http://support.microsoft.com/kb/975163/
If you're running Windows 7, install this patch
http://h30434.www3.hp.com/t5/Lockups-Freezes-Hangs/Driver-update-for-Win7-USB-issue-on-nVidia-chipse...
And only use the driver from the system manufacturer's website or Windows Update. Do not use the latest drivers from NVIDIA's website for the IQ700 series

Replacing Motherboard on HP Media Center PC running Windows Vista Home Premium (32-bit)

Running OEM version of Windows Vista Home Premium (32-bit) on an HP Pavilion Media Center m8226x Desktop PC. Replacing motherboard ASUS M2N68-LA Motherboard 6150SE HP Narra2-GL8E with an MCP61PM-HM (Nettle2) motherboard due to failure. Both boards have same chipset and form factor. Can I just replace board without reinstalling windows? Do I need to install new drivers? I don't have an install CD or install key, would Microsoft provide a key if needed? Is there a link I can reference for MB replacement/ install?
Thanks for you assistance!
HC
This question was solved.
View Solution.

The OEM license is tied to the original motherboard version, ie M2N68-LA. You lose the OEM "rights" when you changed the board.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Installation of oracle 10gR2 on Windows Vista Home Premium 64 bit OS

can we install oracle 10gR2 on Windows Vista Home Premium 64 bit OS ???
While doing sqlplus from command prompt,
it's giving error like
'SP2-1503 Unable to initialise Oracle Call interface'
'SP2-0152 Oracle may not be functioning Properly'
How to troubleshoot the above errors,
Has anybody tried it ???
Plz assist.

No Oracle product is certified against any Windows Home OS.
As Vista was released after Oracle 10gR2, 10gR2 is not certified against any edition of Vista.
You need to downgrade to XP, or install Linux.
Sybrand Bakker
Senior Oracle DBA

System Recovery Fails on new HDD (HP-DVDs, Vista Home Premium 64-bit, DV4-1225dx)

I have a Pavilion DV4-1225dx that had a hdd failure. VISTA Home Premium 64-bit.
Went to purchase the oem HDD @ Tiger Direct (Hitachi 0A56415 Travelstar 5K320 Mobile Hard Drive - 2.5", 5400 RPM, SATA 3G, 250GB, 8MB Cache) but found it was out of stock. I purchased the suggested replacement (WD Blue 320GB Mobile Hard Drive - Designed for everyday computing - 2.5", SATA 3Gb/s, 5400RPM, 8MB C...)
The HP System Recovery DVDs runs for over 12 hours and fails. CTOERROR.flg
ChkErrBB.CMD: Detect some error during PININST_BBV
ChkErrBB.CMD: Check C:\system.sav\logs\BurnBootWarn.log
Besides a video driver not installing I found:
C:windows\system32\Drivers\enecir.sys has not been found
The System Recovery is formatting the HDD incorrectly. After the Recovery failure the HDD shows as:
C: 38.8 GB free of 58.0 GB
E: 2.02 GB free of 12.9 GB
hp G71-340US WIN 7 HP 64 Bit
hp pavilion dv4-1225dx VIsta HP 64 Bit
hp pavilion zd7000 WIN XP Pro
hp pavilion xv886 WIN Millennium / WIN XP Pro
hp deskjet 6980xi
hp pavilion xt236 / ze4200 WIN XP Media Edition

Hi:
If you can still read the 25 character Microsoft Vista product key on the bottom of your PC, you can make your own plain Vista installation media and use that to at least get the OS on your PC.
Here is how to do that if you can read that key:
Please click on the link below, click on the Windows Reinstallation Guide [27-07-2013] pdf link on the upper left of the page and then read the instructions for doing this starting on page 302.
http://philipyip.wordpress.com/dell-community-forums/

Vista Home Premium 64-bit on a MacBook

I've got the 2.4GHz MacBook (Aluminum Unibody one), and want to run Vista Home Premium 64-bit on boot camp. Can I do this? I know the install booklet says it's only on later MacBook Pros, but I was just checking.
Thanks

Hi,
see this thread: http://discussions.apple.com/message.jspa?messageID=9274383#9274383
Hope it helps
Stefan

Cannot install itunes on windows v8.1 64 bit

Cannot install iTunes on Windows v8.1 64 bit.

The old blue iTunes worked fine on my pc, then along came the new red iTunes, which initially refused to install from an auto-update notification, saying it didn't have permission to access one of its own folders (self access to all its other folders was ok).
I then tried a manual download and install as suggested by the auto-update failure dialogue and that was exactly the same - failed at the last hurdle and had to reset itself.
I then tried download and install from iTunes site and this installed without problem, but the application will not open, neither from the desktop icon with user or admin rights, nor from a direct open or run as admin from the iTunes folder .exe file.
I have tried a repair install and an aggressive uninstall to ensure any TSR components are purged followed by a clean install - no difference.
My other pc is no problem and iTunes installed and runs on there fine, so it must be a configuration problem on this pc only.
I disabled my antivirus and malware detection during the install and made an exception for iTunes, to no effect.
When selecting the app I get a blue circle for a few seconds then nothing, no dialogue or notification of problems.
Any suggestions welcomed.

The system recovery disks I made for my HP dv7-1132 NR running Vista Home Premium 64 bit won't work.

I just bought this laptop and I want to wipe the drive clean. It is an HP dv7-1132 NR with Vista home premium 64 bit but still on Service Pack 1. It came with no system restore disks so I made my own through the System Recovery Manager. Apparently the disks were created without any problems as there were no errors.
When I tried to use the first disk however (by inserting the first disk into the dvd drive and re-starting the computer, Once it has re-booted I get the message:
"This PC is not supported by the system recovery disks. You will not be able to recover this system with these disks"
Can anyone help me help me to either get these discs working or give me another work around that will wipe this hard drive? I am not a techie so my knowledge base is rudimentary. If you can give alot of detail in any possible fixes, that would be great!!!1
Thanks. and Happy 4th of July Americans!!!!

Usually this is caused by missing info in the BIOS and must be corrected by service from HP. Enter BIOS by tapping away at the F10 key immediately after power on. Is all system info there,serial,etc?
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Satellite A350D-005- Windows Vista Home Premium 64 Bit and Burning

Hi. I recently purchased a Toshiba Satellite A350D (PSALEC-005004). It has a 64 bit processor running vista home premium 64 bit. I have never been able to successfully burn a cd or a dvd. I have tried nero 7, 8 and 9, along with Roxio Easy Media Creator 10, along with a few other various software. Nero ends up in it haulting around 10%, then eventually saying that the burning process has failed, resulting in me either having to turn the computer off to remove the wasted disc or if im using my external burner i have to turn it off then back on. When I use Roxio it seems like its going to burn until the end, where it seems to hault again. What am I doing wrong or what can I do to fix this problem?

Okay, I tried burning a CD and DVD using Vista's built-in software, and it says this after attempting: "There was an error burning the disc. The disc may no longer be usable." I have no clue as to why the computer will not let me burn using any program. I have tried using my external Sony DVD burner that works on my 32 bit system, and it wont work on this 64 bit machine either. Any suggestions as what to try next?
Also, whenever it decides to quit burning, the burner seems to keep going and wont stop unless I shut the computer off (for the internal burner) or Turn off the power to the external burner. It also disappears from the list under the "Computer (My Computer)" section.
Message Edited by ATVDrtBikeDemon on 02-14-2009 02:27 PM

Flex Builder 3 on Vista Home Premium 64-bit

Has anyone tried Flex Builder 3 on Vista Home Premium 64-bit? Does it work? I see Vista is supported but the requirements page says nothing specifically about Flex Builder on 64-bit Vista.
I also see some older questions on the topic in the forums, but nothing recent and no complete answers.

other Vista/FB users I've talked to feel the same
Well that's always an easy one..
I talked to a million FB/Vista users and they all say it's blazing fast..
See how easy that is?
I suggest you look into optimizing your system and/or look at what might be causing this.
But all I can say is FB3 sure isn't slow.
I'm surprised it runs decent for you
Well, I'm surprised you're surpised
I still have to see a MAC outperform anything compared to my PC.

I cannot install itunes in vista home premium 32 bit

Similar Messages

Maybe you are looking for