I cannot log into icloud after password reset on all devices

I recently reset my password for my apple id/icloud.
Now I cannot seem to log into any of my devices. iphone 6, ipad mini retina, and macbook pro retina.
on some devices I have been able to log out of the account but I can't seem to log back in. The ipad mini retina is having problems logging out of icloud.
Any help or ideas would be appreciated.

I am stuck in a loop on my ipad - I have followed the instructions in your article above - I keep trying to delete icloud but cannot because it still wants me to login with my old id/email which is then rejected because it no longer exists.  STUCK.  What am I to do?  Now none of my Apple devices will sync and this is extremely irritating - to say the least.
I assume that I wont be able to access the backup on my computer either because of this - otherwise I would delete my ipad completely and start again - and I really cannot see why, in this age of hackers etc you wonderful APPLE people have not sorted this problem out.
I had to change my email addresses because someone with too much time on their hands hacked me.  Now I appear to be stuck.
Please help.
Perse

Similar Messages

  • Cannot log into iCloud after upgrading to Yosemite

    I have 3 iCloud accounts on my mac for various family members but after the upgrade I cannot get the iCloud account to log in. It just keeps asking for the password.
    Any ideas?
    Dhiran

    You must be logged in using the Apple ID used to purchase iPhoto or to set up your Mac - If you are logged in with the Apple ID that was used to purchase iPhoto or to set up the computer if it came preinstalled then quit iPhoto, backup your iPhoto library  and drag the iphoto application to the trash (do not empty the trash yet) and then go to the App store and install iPhoto
    If this does not allow you to upgrade then you need to contact App store support  - link i son the right of the app store window
    LN

  • HT204053 I cannot log into iCloud using my Apple username and password.  I keep getting an error message that states "CANNOT SIGN UP - The Apple ID is valid but is not an iCloud account."  How do I fix this?

    I cannot log into iCloud using my Apple username and password.  I keep getting an error message that states "CANNOT SIGN UP - The Apple ID is valid but is not an iCloud account."  How do I fix this?

    You are getting this message because you are attempting to create an iCloud account on a PC.  You can only create iCloud account on an iOS device (iPhone, iPad or iPod Touch) running iOS 5 or higher, or on a Mac running OS X Lion (10.7.2) or higher.  After creating your account on one of these devices you will then be able to sign into the account on your PC.

  • HT5616 i cannot log into icloud

    cannot log into icloud with my apple id on my macbook. says wrong id

    MobileMe was closed over a year ago and was replaced by iCloud.  Even though you still have that setting it will no longer function.
    You will need to upgrade to OS X Lion higher in order to set up iCloud on your Mac.  First check to see if your system meets the system requirements to upgrade.
    Lion system requirements are:
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OS X v10.6.6 or later (v10.6.8 recommended)
    7GB of available space
    Mountain Lion and Mavericks requirements are the same, as listed here: http://support.apple.com/kb/HT5842.
    If you can run Mavericks, you can download a free upgrade from the Mac App Store.  If your system can only run Lion, you can go here to purchase a redemption code to download it from the Mac App Store.  If you prefer Mountain Lion for software compatibility reasons, you can go here to purchase a redemption code to download it from the Mac App Store.
    After upgrading, you will find iCloud in System Preferences>iCloud on your Mac, and can set it up as explained here: http://www.apple.com/icloud/setup/mac.html.
    Before upgrading, you may want to check the compatibility of your existing applications by checking here: http://roaringapps.com/apps:table.   Also be aware that older PPC programs such as AppleWorks and Office 2004 for Mac will not run on OS X Lion or higher.

  • Cannot log into Icloud on my pc

    I cannot log into Icloud with my pc I keep getting the error message :
    Icloud encounter  an error while trying to connect with the server.

    Been looking for similar posts, surprised I haven't found more, because I'm fairly certain that there is a current problem with some parts of Apple's server network: I have 3 iCloud accounts in Mail on my Macbook, and 1 of them (annoyingly, my main one) has not been able to connect for an hour or two. And both of the others wouldn't connect for a few minutes, but are now working again.
    More suprising is that trying to log in to webmail (www.icloud.com) is giving a very unhelpful error message, suggesting the server is down. Everything else Internet is working fine for me, and haven't changed any settings, so fairly sure problem is Apple's end.
    It's possible that your iPhone is collecting your mail via a different server route that is still working; my three iCloud accounts are collecting via p02.imap.mail.me.com, p09.imap.mail.me.com and p99.imap.mail.me.com, and it's only p02 that's consistantly not working.

  • My iPad was logging me out so I have reset it - I cannot log into iCloud now and also my login for app updates defaults to an incorrect email address can anyone suggest how to re configure

    My iPad was logging me out so I have reset it - it retained all apps but I cannot now log into iCloud and when downloading apps it defaults to the wrong email details so the iPad doesn't recognise it to update - can anyone suggest how to resolve this

    Have you attempted to access your Apple ID through iforgot.apple.com ?
    If you have access to the internet, you should be able to go through the process of resetting your Apple ID password via security questions or email.
    Assuming that you use the same Apple ID for iCloud and the iTunes/App Stores, resetting your password may help you log back into iCloud and the iTunes/App Stores.

  • Cannot log into Icloud

    I cannot log into my icloud account on my computer. When I try to log in it says that my apple sign in is valid but not an Icloud account. when i got to reset it it resets my apple id.  Can someone please help me with this???
    thanks.

    Hello there, Dbrpth.
    To use iCloud, you must first sign up via your Apple ID on an iOS device running iOS 5 or later.  This can also be done on a PC running Microsoft Windows 7 or later:
    Creating an iCloud account: Frequently Asked Questions
    http://support.apple.com/kb/HT4436
    How do I set up iCloud on my iOS devices, Mac, and PC?
    To set up iCloud, first check that your devices and computers meet the iCloud system requirements. Then follow the instructions to set up iCloud on your iPhone, iPad, iPod touch, Mac, and PC.
    Once you have created an iCloud account via one of this listed ways above, you should be able to use it on your PC.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • How do I log into icloud after the last update?

    I thought I couldn't log into iCloud.com because the site was down (last week), but still cannot log on... just the general error saying cannot login, no real explanation given. Site sounds like it is working now, but I still cannot log in (but I can on my iPhone). I know I agreed to some update or another and problems were after that.. but I don't see anything online about that update. Any ideas of what I can do??
    I love my iCloud email, but looks like I will have to cancel it and go back to yahoo sigh.

    just the general error saying cannot login, no real explanation given
    Although your message isn't mentioned in the symptoms, let's try the following document with that one:
    Apple software on Windows: May see performance issues and blank iTunes Store

  • Cannot log into iCloud via system preferences on MAC

    I am trying to enter my icloud password on my mac and it seems to just be thinking.  If i enter the incorrect one it tells me that I've entered the wrong one.  Not sure what is going on.  I even went as far as changing my password, I then updated it on my iphone, it was accepted, I went to icloud on the web and was able to log in but once again when I try on the mac it just contines to think.  Suggestions??
    Thank you in advance!

    You might try the following, you may be able to skip the first few steps depending where you are up to with your troubleshooting.
    1. Sign out of your account
    (If you are unable to do this because System Preferences has frozen, Force Quit System Preferences and try again)
    2. When prompted, opt to delete, contacts, calendars etc from your Mac.
    (You are only deleting this data from your Mac, not from iCloud, the data will be reinstated when you log back in. If you need to check that the data is in iCloud before deleting it go to iCloud.com and check each section for data)
    3. Having logged out, check that the iCloud accounts along with their data have disappeared from the Mail, Address Book and iCal Applications.
    (If necessary, delete the iCloud accounts from each of these application separately from each Applications Preferences)
    4. At this point it may be worth trying to log into iCloud from the System Preferences iCloud settings again, if this works, all well and good, if it doesn't continue to step 5.
    5. Open your User Library folder in the Finder. (When in the Finder, go to the Go menu, hold down the option key (alt) and choose Library when it appears in the Go menu)
    6. Navigate to Library > Application Support > iCloud and drag the iCloud folder to your desktop. (This action only copies the folder and will provide you with a back up)
    7. Select the iCloud folder again in Library > Application Support and drag it to the trash, enter your administrators password when prompted.
    8. Restart your computer.
    9. You should now be able to enter your ID and Password in system Preferences > iCloud and log into your account. Check the services you wish to use and once you are satisfied it's working as it should, trash the iCloud folder you copied to your desktop earlier.

  • Cannot log into EM after install new DB

    I have now installed, uninstalled and re-installed 10G about five times on my W2K laptop without being able to successfully start EM or log into a DB via SQLPlus, etc.
    There are two issues I am experiencing:
    1) If I am not connected to the web thru my laptop (online), I cannot even reference EM. I have set my internet connection to Never dial a connection so it will not keep prompting me to connect, but this has been to no avail. If I open my browser and work offline and try to use the link to EM, it will not let me--it will give me the standard web page not found, detect network settings, etc screen.
    2) If I am online, the EM web page comes up and tells me that my DB is not started and that I have to login as SYSDBA to start it. Despite using the correct OS userid/pwd and oracle userid SYS/pwd for the database login, it continues to tell me that the userid is wrong!
    I cannot log into the DB as sysdba or otherwise via SQLPLUS. I can do "sqlplus /nolog" to get into sqlplus but can't connect to anything--it gives me the TNS-adapter error: not found' error message.
    Now, I just did a fresh install and used DBCA to create a starter DB called test. I do not see a listener but on my last install (same problems as now) when I created one thru Net Mgr or Net Config Asst, it didn't matter as it wouldn't allow it to start in my services. There was already a OracleOraDb10g_home1TNSListener service set to AUTOMATIC and my new one (which it called OracleOraDb10g_home1TNSListener1Test) was set to manual and could not be started. LSNRCTL said that the new listener was blocked, so I assumed that 10G was using the EZCONNECT naming method and did not need the new listener.
    What gives? Any help would be very much appreciated as I am at a complete standstill.
    Thanks!
    Dave

    Jeff,
    Thanks for the info on policy settings.
    Let's see: I had 8.1.5 installed and I tried the update to 10g but only works from 8.1.7 or 9i, so then uninstalled and re-tried to do fresh install in a different home (OraHome10 vs OraHome8). That didn't go so well--it changed my 8i somehow so 8i would no longer work. Then I tried fresh install of 9i with a new starter DB--couldn't get into that DB. So uninstalled 9i, uninstalled 10g, uninstalled 8i, deleted every reference to Oracle on my computer, registry, etc., and re-tried 10g. I even went and bought a registry cleaning tool to zap things to make sure it was clean. It looked like it installed fine, provided me with starter DB but I just can't get into it. I'll let you know if the policy setting works.
    I'm trying to look on the bright-side and say that we are learning a lot!
    Dave

  • Cannot log into mail after move from mobile me

    Just upgraded to iCloud.  After the move, the mail application cannot sign into the new iCloud mail account.  I can log into the browser, and I can see emails there.  But the mail application on my mac pops up a dialog saying that the password was rejected.  What now?

    Hi
    This bit:
    " . . . mail SACL is not enabled; error = 2 . . ."
    is telling you Service Access Control List (SACL) is not enabled for that user. You can either do this using Server Admin > Server Name > Access or using the Server App > Users > select the User > click on the Gearwheel > Edit Access to Services. Tick the box.
    If you create users using WGM no services are enabled for that User by default. If you use the Server App to create users, services should be enabled by default for that user. It's recommended you always use the Server App to create Users and Groups.
    HTH?
    Tony

  • Cannot log into NI1742 after it is set to automated inspection

    Hello
    I have in my possession a NI1742 Smart Camera.  Once I set the camera to full automation, I
    cannot log back into the camera through the Ethernet port. 
    The steps I have done:
    Go to the Target Tab
    --> Target Options --> Startup --> Start Inspection when
    launched
    The only way I was able to disable the automated inspection is
    by resetting the camera.  However this
    deletes the uploaded program. 
    I have the standard manual.  Is there another manual that I'm not reading?
    Thanks

    You cannot have a popup window work in a Run LV step when run on a target. The VI is actually run on the target, so you won't see the VI on your host machine. This is why the User Input step is not available for RT targets. I like your tab control to show the different states and achieve a popup like experience. One thing that could save some memory is to remove all the Calculator steps you have before each Update Custom UI step. It looks like you are trying to set the tab control in this step (i.e. setting a property node to a constant), but it doesn't actually do anything (except take up memory and processor time) because the Set Custom UI step is what will actually change the tab control value. So deleting all the unnecessary steps should free up some memory and run faster.
    To help with the target not being responsive when running in inspection mode, you should put a delay any place where the inspection could loop repeatedly very quickly. It looks like you have delays in lots of places, and I'm not sure all of them are needed, but at least you give plenty of time for target to respond to outside connection requests.
    Another idea instead of trying to implement a bunch of user interaction in the UI running on the target is to make a UI on your host machine and use the new VBAI API to control just inspection that runs on the target. This way the target doesn't need to handle all the login/password/user interaction that is probably more natural to handle in Windows VI or C app where you can have popup dialogs, and based on the UI interaction on the host side, you use the API to tell the target to run an iteration of the inspection and you can set shared global variables before hand so when the target does run, it can use values set from the host side in the inspection. I realize this is a big change from the inspection you have already, but I think it could have a lot of advantages:
    - VBAI focuses on what it does best...automated visual inspection and leaves UI interaction/admin logging in control to a programming languages that is easier to accomplish this (i.e.LabVIEW).
    - Makes your inspection smaller so it takes up less memory and you don't have to worry about running out of memory as easily.
    - Makes it easy for your application to grow and include multiple smart cameras/targets all controlled with one UI.
    - Makes you inspection a lot easier to read so not so much of the state diagram has to deal with user access/password types of interaction.
    Some of the down sides include:
    - reworking inspection to seperate UI interaction and username/password log in code from visual inspection
    - need to synchronize updating variables from host to target with UI interaction/logging in...shared variables work pretty well, but they are not meant to be deterministic or synchronous (i.e. no gaurntee that a variable you set first will be updated first on target, so even though you set params before you set a flag to start inspection, the start inspection flag may be updated on the target before the params are). There is a Flush Shared Variable VI that can help avoid this problem though, but just wanted to make sure you knew this was something to look out for and handle by using the Flush Variable VI.
    Anyway, something to think about. Thanks for including your inspection, very helpful to see how you're using VBAI.
    Thanks,
    Brad 

  • HT204053 cannot log into icloud

    I can log into the individual icloud tools but not into the actual icloud settings.  Under the main sign in page, it just keeps trying to log me on.  No rejection for wrong password unless i intentionally type it incorrect....why wont it log in

    You are getting this message because you are attempting to create an iCloud account on a PC.  You can only create iCloud account on an iOS device (iPhone, iPad or iPod Touch) running iOS 5 or higher, or on a Mac running OS X Lion (10.7.2) or higher.  After creating your account on one of these devices you will then be able to sign into the account on your PC.

  • Travelling in Mauritania, cannot log into icloud with my PC netbook. I can read my mail on my iphone, but I get a message that "icould is not available" when I try to open it on the PC. It's very annoying as it's not so easy to type on iphone!

    Very strange. I have a PC netbook that I use when I travel, and here in Mauritania, when I try to log on icloud to check my mail, it tells me that it is not available or the server is down - the internet is working for everything else. I can read my mail on my iphone, connected to the same network. Is there some reason ou can't open icloud on an iphone and a pc at the same time?

    Been looking for similar posts, surprised I haven't found more, because I'm fairly certain that there is a current problem with some parts of Apple's server network: I have 3 iCloud accounts in Mail on my Macbook, and 1 of them (annoyingly, my main one) has not been able to connect for an hour or two. And both of the others wouldn't connect for a few minutes, but are now working again.
    More suprising is that trying to log in to webmail (www.icloud.com) is giving a very unhelpful error message, suggesting the server is down. Everything else Internet is working fine for me, and haven't changed any settings, so fairly sure problem is Apple's end.
    It's possible that your iPhone is collecting your mail via a different server route that is still working; my three iCloud accounts are collecting via p02.imap.mail.me.com, p09.imap.mail.me.com and p99.imap.mail.me.com, and it's only p02 that's consistantly not working.

  • I cannot log into icloud with Windows 7 64 bit system.

    It was working for about two months without a problem and then it ceased working about 2 months ago.  I just get an ongoing circle as if it is trying to log me in, but no luck.  I can log in on icloud website however.

    Curt, since I purchased a new laptop, I had to deactivate CS4 on my old laptop, uninstall, and install CS4 on my new laptop with my disks and activate. That all went fine, but I can not update the software. CS4 needs to be updated when installed from the original disk, as there are important bugs and resolved issues with the software that are available with the updates that are released after the original disk.
    By "not work", I mean that I am not able to update the software at all so that I may work in the latest version of the CS4 software without issues.
    JJMack, thank you for your suggestion, however, I am not able to manually install the updates either. All updates fail.
    Overfocused, thank you for your suggestion, I will be looking into that, as well as a bunch of other Windows 7 possibles. It may be what you suggested, or it may be a Windows 7 related utility issue or another program with a conflict with Adobe updates in Windows 7 etc.
    I remember a couple of years ago when I got the Vista OS laptop, I spent a couple of weeks to research a major bug that eventually was resolved, it was an Office/Adobe incompatibility issue with infopath running Vista.
    I hope that I am able to solve the issue soon, it has been a week so far with no resolve. If or when I find a fix to this issue, I will post it here.
    Thank you all for your help and suggestions, I really appreciate it.
    All the best,
    Aaron

Maybe you are looking for