I cannot make ringtone or create AAC file in new iTunes12.1.2.27

since i install new itunes after they launch update ios 8.3
i cant create AAc file or cant make ringtone any more....
and there are lots of issue with this new update..they should fix all this issue with new update to iphone and they should keep
the old create AAc file option in itunes...

Similar Messages

Create AAC files from ALAC

I want to copy some files to a small 30Gig iPod, so do not want to sync large ALAC files over to it.
I know it is possible to create AAC versions of the files, but that then leaves me with duplicates of all the songs on the library. I sync'd to the iPod and deleted all AAC files.
It was then I realised, that not all my library is ALAC....I did already have some AAC files....which I had just deleted. I ended up doing a Time Machine restore of the complete Music/iTunes folder.
I do not want to make that mistake again.
Is there another way I can do this? All the songs I want to convert to AAC, sync and then delete are in a single playlist.
I was thinking of maybe creating a new library of just AAC files, but how do I export just selected files. I cant seem to find any export files type options. If I could get all the files into a single folder, then I could create a new library and copy all that new folders contents into it.

You might take a look at this script (courtesy of Doug's AppleScripts for iTunes):
http://dougscripts.com/itunes/scripts/ss.php?sp=losslessaccworkflow
Regards.

Creating AAC files.... changed w/9.02?

Hi there,
When I get my songs from iTunes, they are usually about 8 mg. I used to select them and use the menu option "Create AAC version". This would create another file about half the size. Then I would delete the big file and just keep the little one.
BUT, with 9.02, the files are almost the same size after creating the AAC version????
I looked at the properties and the bit rate is now 256.. where as before it was 128 (after AAC conversion). So, how do I set iTunes to use the 128 bit rate so the files are smaller when I create an AAC version?

Go to iTunes -> Preferences -> General.
Click the "Import Settings" button.
Choose these settings:

How to create License file for New ADDON.

Hi,
Can any one tell me steps to create license file for any addon which is developed in VB.NET.
Regards ,
Ganesh

Hi,
The license system for addons is working fine for a long time now. The date of January 2005 now changed to 2007 or 2008 is only the date until when you can work without the AddOnIdentifier (we give some extra time for the addons to migrate to the new system).
If you use the AddOnIdentifier then you have to ask for a LicenseKeyName to SAP to create your solution AddOnIdentifier. Then your clients to be able to run your addon will need a specific license in their file corresponding to your licenseKeyName (when you ask for a license file you can ask for different partners addons licenses). The system is up and running for a long time now.
What problems are you having with it? I cannot see your point.
Regards
Trinidad.
Hope it helps

How to make fileDownloadActionListener to open pdf file in new window

Hi all ,
i used the component [ fileDownloadActionListener ] to make download pdf file ,
my question is
How make this components to download and open file in new window ?
Jdeveloper version 11.1.2.3

Here is a sample http://technology.amis.nl/2011/07/28/adf-11g-show-pdf-in-a-popup/
or http://mahmoudoracle.blogspot.de/2012/06/genius-adf-buttons.html#.UZygjrVM_Lk
in General you can use the technique described here http://tompeez.wordpress.com/2011/12/16/jdev11-1-2-1-0-handling-imagesfiles-in-adf-part-3/ and configure hte browser to püen the doenloaded file using the configured application (pdf reader in your case).
Timo

Cant create aac files in itunes 11

i am unable to convert music files to aac format in the current version of itunes (11.0.2.26)
i will save time and list the things i have already done that didnt work:
change import settings in preferences to aac. when i right click the song, the 'convert to aac option' does not appear in the menu above 'consolitdate files'.
select song, click on on file menu, select create new version. when i do this, all selections are grayed out.
every answer to this question has listed the two above sequences as the 'fix, however they did not work in my situation.
all i want to do is make a ringtone since itunes decided to delete all my music and ringtones when i updated to ios6.
i did a backup before the update and it didnt save anything. typical apple fail.

I encountered this problem too. I found though when I burned the songs to disc (dvd), ejected the disc and re-inserted it that the songs on the dvd when clicked with the right mouse button were able to be converted to aac and were added to the music library.
A convoluted work around but it did work for me.... I hope it works for you too.

The kerning tool appears to be stuck? Cannot make any changes to text boxes in new or existing files

When I try to adjust the kerning in any text box, whether it be in a new or existing file, the change will not take place. It will just automatically return to either the default. Please help!

Thanks, perhaps this might help. as you can see the kerning is set at 300 which should make the T/E very far apart they aren't. The "after" shows the kerning set at (0), even though I made the change to 300. The cursor is in the correct place, even though it doesn't appear on the screenshots.

AAC file conversion not working in iTunes 11.1.5.5

Hi, I have updated to the latest version of iTunes [11.1.5.5] and now when I try to convert a wav file to aac it claims to have converted the files but it remains as a wav file. Any body have any ideas for a fix?

it claims to have converted the files but it remains as a wav file.
Make sure you are looking at the newly created AAC file. The orginal WAV will still be there, but it is not the one you want.

AAC files and third party players....

When I mported my music library from cd, I had my prefs set to create AAC files. Now I'm shopping for an mp3 player, but I'm not rich. I would love to get a 30 gb video ipod, but I just don't have the extra funds at the moment. So does anyone know of any 3rd party companoes that make AAC compatable players???
Jason

Jason,
I've owned an iPod mini since the day they were first introduced. It's 4 GB.
My music collection in iTunes is currently 28 GB and growing. Every week or so, I change the mix of music on the iPod and it's been great.
What I'm saying is don't necessarily feel the need to carry you entire music collection around with you. Sure it's great if you can afford it, but why not look at a Nano?
If that's still too much, you can easily use iTunes to convert you imported music collection to mp3 if you like. That's assuming your collection is mostly CDs that you've ripped.
Matt

How to download aac files on ipad

I cannot download either mp3 or aac files with either Safari or Chrome.

I use Free Music Download; I don't think you can use Safari or Chrome.
https://itunes.apple.com/sg/app/free-music-download-mp3-downloader/id583845719?m t=8

Making change in original application file for new version

Hi
I am new to DMS.
I have a basic query about versioning of DIR.
I have created a DIR with status in Released.
I have attached a original application to the DIR. Now when I am creating a new version of DIR, original application file is also getting copied to the new version which is desired.
My problem is I want to make changes into original application file in new version of DIR and want to save. But I am unable to do so. It is not allowing me to change the original application file for new version which is desired for storing some ISO documents.
Is there any settings which I am missing?
Waiting for reply ASAP.
Thanks and Regards,
Niraj Sikligar

Hi
If you want to make changes in the "Release" Status, go to dc10, select Doc type and define status screen. Do not put "S" (Lock mode) for Status - Release
Also please check in new version , you are clicking on Edit symbol in Orginals tab, if u double click the file, it would open always in display mode , and it wont allow you to make any changes
Regards
Aby

Why my itunes cannot create aac.. already right click.. same.. unistall all file.. install back.. also same...

why my itunes cannot create aac.. already right click.. same.. unistall all file.. install back.. also same...

Manmira,
Have you gone to Edit > Preferences > General > Import Settings to make sure that "Import Using" is set to "AAC Encoder"?

"create aac version" only makes another .m4a file...

I am trying to use the "Create AAC Version" (right click on album) to create some files for playing in the car. When I select that option in the dropdown I find iTunes does indeed create a copy of the songs on the album but the file extension is duplicated to .m4a (same as original) and not .acc
Would appreciate any insight into what's going on here or what I'm doing wrong.
Thanks!

m4a is aac, it's just Apple's way of naming it. Change the extension to .aac if your car demands it but I am not sure how iTunes will react. If it is tons of files you can probably find an online bulk re-namer (I use a free one but they charge for it now with newer OSX versions).

Itunes won't open - get message that .itl file cannot be found or created

My HP laptop with windows just crashed, and I'm trying to get everything back to working order. I reloaded itunes and it seemed to be working fine. Then at some point, I went to open it and received the messsage:
The itunes library .itl file cannot be found or created. The default location for this file is in the "itunes" folder in the "Music" folder.
I uninstalled and reinstalled itunes several times, to no avail. The program won't open and I continue to get the same error message.

Check the permissions in that folder and make sure you have full read/WRITE privileges.
Patrick

Lucreate - Cannot make file systems for boot environment

Hello!
I'm trying to use LiveUpgrade to upgrade one "my" Sparc servers from Solaris 10 U5 to Solaris 10 U6. To do that, I first installed the patches listed on [Infodoc 72099|http://sunsolve.sun.com/search/document.do?assetkey=1-9-72099-1] and then installed SUNWlucfg, SUNWlur and SUNWluufrom the S10U6 sparc DVD iso. I then did:
--($ ~)-- time sudo env LC_ALL=C LANG=C PATH=/usr/bin:/bin:/sbin:/usr/sbin:$PATH lucreate -n S10U6_20081207 -m /:/dev/md/dsk/d200:ufs
Discovering physical storage devices
Discovering logical storage devices
Cross referencing storage devices with boot environment configurations
Determining types of file systems supported
Validating file system requests
Preparing logical storage devices
Preparing physical storage devices
Configuring physical storage devices
Configuring logical storage devices
Analyzing system configuration.
Comparing source boot environment <d100> file systems with the file
system(s) you specified for the new boot environment. Determining which
file systems should be in the new boot environment.
Updating boot environment description database on all BEs.
Searching /dev for possible boot environment filesystem devices
Updating system configuration files.
The device </dev/dsk/c1t1d0s0> is not a root device for any boot environment; cannot get BE ID.
Creating configuration for boot environment <S10U6_20081207>.
Source boot environment is <d100>.
Creating boot environment <S10U6_20081207>.
Creating file systems on boot environment <S10U6_20081207>.
Creating <ufs> file system for </> in zone <global> on </dev/md/dsk/d200>.
Mounting file systems for boot environment <S10U6_20081207>.
Calculating required sizes of file systems              for boot environment <S10U6_20081207>.
ERROR: Cannot make file systems for boot environment <S10U6_20081207>.So the problem is:
ERROR: Cannot make file systems for boot environment <S10U6_20081207>.
Well - why's that?
I can do a "newfs /dev/md/dsk/d200" just fine.
When I try to remove the incomplete S10U6_20081207 BE, I get yet another error :(
/bin/nawk: can't open file /etc/lu/ICF.2
Quellcodezeilennummer 1
Boot environment <S10U6_20081207> deleted.I get this error consistently (I ran the lucreate many times now).
lucreate used to work fine, "once upon a time", when I brought the system from S10U4 to S10U5.
Would anyone maybe have an idea about what's broken there?
--($ ~)-- LC_ALL=C metastat
d200: Mirror
    Submirror 0: d20
      State: Okay
    Pass: 1
    Read option: roundrobin (default)
    Write option: parallel (default)
    Size: 31458321 blocks (15 GB)
d20: Submirror of d200
    State: Okay
    Size: 31458321 blocks (15 GB)
    Stripe 0:
        Device     Start Block Dbase        State Reloc Hot Spare
        c1t1d0s0          0     No            Okay   Yes
d100: Mirror
    Submirror 0: d10
      State: Okay
    Pass: 1
    Read option: roundrobin (default)
    Write option: parallel (default)
    Size: 31458321 blocks (15 GB)
d10: Submirror of d100
    State: Okay
    Size: 31458321 blocks (15 GB)
    Stripe 0:
        Device     Start Block Dbase        State Reloc Hot Spare
        c1t0d0s0          0     No            Okay   Yes
d201: Mirror
    Submirror 0: d21
      State: Okay
    Submirror 1: d11
      State: Okay
    Pass: 1
    Read option: roundrobin (default)
    Write option: parallel (default)
    Size: 2097414 blocks (1.0 GB)
d21: Submirror of d201
    State: Okay
    Size: 2097414 blocks (1.0 GB)
    Stripe 0:
        Device     Start Block Dbase        State Reloc Hot Spare
        c1t1d0s1          0     No            Okay   Yes
d11: Submirror of d201
    State: Okay
    Size: 2097414 blocks (1.0 GB)
    Stripe 0:
        Device     Start Block Dbase        State Reloc Hot Spare
        c1t0d0s1          0     No            Okay   Yes
hsp001: is empty
Device Relocation Information:
Device   Reloc Device ID
c1t1d0   Yes    id1,sd@THITACHI_DK32EJ-36NC_____434N5641
c1t0d0   Yes    id1,sd@SSEAGATE_ST336607LSUN36G_3JA659W600007412LQFN
--($ ~)-- /bin/df -k | grep md
/dev/md/dsk/d100     15490539 10772770 4562864    71%    /Thanks,
Michael

Hello.
(sys01)root# devfsadm -Cv
(sys01)root# To be on the safe side, I even rebooted after having run devfsadm.
--($ ~)-- sudo env LC_ALL=C LANG=C lustatus
Boot Environment           Is       Active Active    Can    Copy
Name                       Complete Now    On Reboot Delete Status
d100                       yes      yes    yes       no     -
--($ ~)-- sudo env LC_ALL=C LANG=C lufslist d100
               boot environment name: d100
               This boot environment is currently active.
               This boot environment will be active on next system boot.
Filesystem              fstype    device size Mounted on          Mount Options
/dev/md/dsk/d100        ufs       16106660352 /                   logging
/dev/md/dsk/d201        swap       1073875968 -                   -In the rebooted system, I re-did the original lucreate:
<code>--($ ~)-- time sudo env LC_ALL=C LANG=C PATH=/usr/bin:/bin:/sbin:/usr/sbin:$PATH lucreate -n S10U6_20081207 -m /:/dev/md/dsk/d200:ufs</code>
Copying.
*{color:#ff0000}Excellent! It now works!{color}*
Thanks a lot,
Michael

I cannot make ringtone or create AAC file in new iTunes12.1.2.27

Similar Messages

Maybe you are looking for