I cannot make the Alesis Q88 speak to Logic pro 9 with usb

Why doesn't the Alesis Q 88 speak to Logic 9 with a USB

There are many possible reasons. Most of them are your fault, unfortunately (just kidding... )
Open the program Audio MIDI Setup (it's in Applications>Utilities). In it, make sure you see the MIDI window. If your Q88 is plugged into any of the Macs' USB ports it should already show up there. If not, try a different USB port. If still not, try a different USB cable.
If your Q88 shows up as active in Audio MIDI Setup's MIDI window, then it will automatically work in Logic.
All this should however already have worked without checking this. So: In Logic, have you created a software instrument track loaded with a software instrument, and have you got that track selected or record-armed?

Similar Messages

  • I cannot make the unread message indicator go away on my 5S.  My phone shows 3 unread messages when in fact there are zero unread.  Help please

    My 5S shows that I have three unread text messages.  However, I do not. I have checked everything I know to check and cannot make the little red 3 go away.  Any ideas?  This is super annoying.

    While the action you describe is not normal for the iPhone, is this the only time that it has occurred or has it happened again? There are the normal user trobleshooting procedures that you can follow, power off/on, reset, restore, however, if it has not happened again, it sounds like an isolated incident that has not been duplicated.
    Also, do you have a passcode lock on the phone to prevent others from accessing your data?
    Message was edited by: ChrisJ4203

  • In iTunes under my device, under the apps tab, Why are all the options shaded out?  I cannot make any changes, select any apps or do anything with the apps.  I was able to load a few apps and sync but cannot sync anymore to my phone.

    In iTunes under my device, under the apps tab, Why are all the options shaded out?  I cannot make any changes, select any apps or do anything with the apps.  I was able to load a few apps and sync but cannot sync anymore to my phone.

    Hi,
    ( I search for iChat questions when I have finished in the iChat Forum)
    So the menu bar reads iChat, File,  Edit,  View, Buddies, Video, Window and Help
    There is no Buddy List open.
    There is no other window for iChat open.
    In the iChat Menu you only have access to Status.
    Is an item ticked in the list ?
    Is this a green (Available item) or  Red ( an Away one) ?
    Can you access the Accounts option ?  (Sitll in the iChat Menu)
    Is anything in here ticked ?
    In the Window menu any Logged in account should appear in the list  (Between the Next Chat and File Transfer items)
    It would be useful to know which version of iChat this is.
    If no account is ticked (iChat Menu > Accounts) or not showing in the Window Menu, plus you cannot determine the Status and you cannot access the Preferences then you need to access your Home Folder/Library/Preferences
    As the Library in the Home Holder is Invisible in Lion you will need the Finder's Go Menu > Go to Folder option  (you can use it in earlier OS versions if you want)
    Type in:-
    ~/Library/Preferences
    Find the file called com.apple.ichat.plist
    Drag it to the Trash and Restart iChat.
    This will lose all the settings in iChat that you have changed from Defaults but there is no way around this.
    9:23 PM      Saturday; August 27, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • I cannot make the "Tones" tab appear into my iTunes even if I go to Preferences and click the "Tones" button. What do I do?

    I just recently bought the iPhone 5 and updated to the newest version of iTunes and I cannot make the ring"tones" tab appear. I even went to preferences and clicked on the "tones" button so that the "tones" tab would appear, and it won't appear. I reset the computer and everything. If someone could please tell me how to make the "tones" tab actually appear, that would be wonderful.
    Thank you!

    Hi Friend,
    In iTunes,
    Click Edit --> Preferences --> General Icon Ensure that
    Ringtones is checked.  If not, check it then click OK…
    Hope it will be helpful

  • HT4009 My ipad is a ios 6.1.3. I'm trying to make an in-app purchase. After entering my Apple ID, a box opens stating i cannot make the purchase, because the ipad connot connect to the itunes store.

    I'm trying to make an in-app purchase, but after entering my apple ID, amessage comes up stating I cannot make the purchase. That the ipad is not connected to the itunes store. My ipad is connected via wifi through the hotspot on my iphone. The ipad is also connected to my laptop with itunes opened. I don't understand what the issue is.

    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • I cannot make the screen smaller.  It will pop up the normal sizee for a second, and the go large.

    I have an I-Pad version 4?  I cannot make the screen go to the normal size.  Squeezing my fingers together  does not work.  Every now and then the normal size screen will pop up for a second.

    Thanks!  It worked.  First time I have used this.  I have had the I-pad for two years.
    BIll

  • Hi I cannot make the accessibility zoom option work. What are the commands on a non Mac keyboard?

    Hi I cannot make the accessibility zoom option work. What are the commands on a non Mac keyboard?

    If you want to convert SWF to DVD in freeway, find a converter to convert SWF to normal video such as: SUPER, then burn to DVD.

  • I cannot make the update of the iphone any more because the preceding owner made the jailbreak blow my telephone does not want to be re-ignited more and N accepts any restoration which must I make? thank you m to help

    I cannot make the update of the iphone any more because the preceding owner made the jailbreak blow my telephone does not want to be re-ignited more and does not accept any restoration which must I make? thank you to help me

    To put your iPhone back in jail do a restore.
    This will put iPhone back into factory condition and you can get your updates (assuming you want the updates).

  • I cannot select the Paper Size when I try to print with HP Photosmart B110a with Windows 8.1 64bit

    I cannot select the Paper Size when I try to print with HP Photosmart B110a
    The same printer was working OK with my old PC with OS Windows 7
    However I got a new PC with OS Windows 8.1 64bit
    I installed the new driver for HP Photosmart B110a that I dowloaded from HP site. Driver forWindows 8.1 64bit.
    In addition to not being able to chose the paper size, also when I go to Printer Properties in Options, all the characters are non-ascii.
    Do you know what may be the problem?
    Thank you

    Hello Nanu64,
    Welcome to the HP Forums.
    I see that you are having some issues when attempting to print from your computer.
    I also see that you stated that not all the options are available in the printing preferences options.  This could be because the installation was not complete or it failed.
    I suggest that we do a complete uninstall/ reinstall as well as some additional steps.
    First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    If you have the printer connected to the computer with a usb cable, please remove the cable from both ends and leave it disconnected until further notice.
    The next link that I have for you will give you detailed instructions for Uninstalling the Printer Software.  Once the uninstall is complete, reboot the computer so that the changes take affect.
    When the computer is back up and running, please disable any firewalls or anti virus protection you may have running. We don't want anything getting in the way of the reinstall.
    The following download is the HP Photosmart Full Feature Software and Drivers.  Save this download to the desktop of the computer so that it creates its own icon.  This will make it easy for us to find when the download is complete.
    Double click the new icon and follow the installation instructions.  The installation will give you connection options (Wireless , usb or Ethernet), if connecting usb, please wait for the prompt to connect the cable.  Connecting the usb cable before hand can cause an issue with the installation.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • All of my apple sets (iphone, ipad and computer) cannot connect the app store since yesterday, what's wrong with the app store?

    All of my apple sets (iphone, ipad and computer) cannot connect the app store since yesterday, what's wrong with the app store? do you know? or do you have have the same experience?

    I still have access.  Must be your phone or your internet connection.

  • Can I use HP Pro 8600 with usb and wireless at the same time

    Can I use HP Pro 8600 with usb and wireless at the same time?  Sometimes I cannot get the wireless to work, it seems to be my laptop.  It would be nice if I could use the usb, but it doesn't work.  What should / can I do, if anything?
    Sam

    Hi,
    Same physical printer but when connecting to SAME computer using both USB and wireless it becomes two (logical) printers. Probably your default prnter is the wireless one, you have to select the right printer before print .
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • What's the best Mac to run Logic Pro 9 and above with no issues

    What's the best Mac to run Logic Pro 9 and above with no issues?

    Any Mac that can happily run OS X Snow Leopard 10.6.8 and Logic Pro 9.1.5.....
    Note: Newer Macs cannot run Snow Leopard because SL doesn't provide hardware support for the newer hardware found in these newer Macs....
    Next best combo for newer Macs is Mavericks 10.9.5 and Logic Pro 9.1.8... but it is nowhere near as efficient a combo as the previous one mentioned...

  • I had to wipe out my laptop, I am waiting to get my serial number back. I need to know how I download Logic Pro 9 with the codes I already have.

    I had to wipe out my laptop, I am waiting to get my serial number back. I need to know how I download Logic Pro 9 with the codes I already have.

    If you bought the boxed set of Logic Studio 2.0  which includes LP9, then you cannot  download it. You must use the disks that came as part of the boxed set... to install from.
    If you bought the App Store version of Logic Pro 9 then go to the Mac App Store App,  Sign into the Store using the same Apple ID you used to purchase LP originally, look under the Purchase Tab and you shouldl find LP9 ready and waiting for you to download and install.

  • I am trying to simulate the robot voice synthesizer sound that is produced by that electronic voice simulator after someone as had their voice box removed.   The vocal transformer insert in Logic Pro doesn't quite do it.   Suggestions?

    I am trying to simulate the robot voice synthesizer sound that is produced by that electronic voice simulator after someone as had their voice box removed.   The vocal transformer insert in Logic Pro doesn't quite do it.   Any Suggestions?

    Try one of the Audio Voice Effects like Alien / Cosmic / Robot… etc. to start with…
    Adjust the Settings in the Inspector to your liking…

  • TS4498 Is music created in logic pro compatible with the logic pro x ? for instance if you have created something in logic pro and wont to add or tweak it a bit is that possible?

    Is music created in logic pro compatible with the logic pro x ? for instance if you have created something in logic pro and want to add or tweak it, is that possible? I suppose you would need the original logic folder?

    Yes it is more or less compatible, except the use of 32 bit plugins, which is prohibited from now on. So although you're able to open Logic projects as far as down to v5 I believe, it is advisable to remain for 'adding and tweaking' in your pre LPX environment.
    Have a nice day!

Maybe you are looking for