I cannot make the screen smaller. It will pop up the normal sizee for a second, and the go large.
I have an I-Pad version 4? I cannot make the screen go to the normal size. Squeezing my fingers together does not work. Every now and then the normal size screen will pop up for a second.
Thanks! It worked. First time I have used this. I have had the I-pad for two years.
BIll
Similar Messages
-
Ok so i played the sims a game that make your screens smaller by adding to black bares at the side that kind of zoom it in but now no matter what the black bars stay and it makes mi screen smaller and stuff doesnt fit on it please help i need the whole screen it is like when a movie doesnt fit the tv screen there is like black on the side making it so that it fits please help
go to System Preferences > Displays and select the highest resolution (1280x820) or something like that. the screen should turn blue for a sec then go back to normal resolution.
-
my question is on printing. i know that you can make the print larger on the screen by adjusting it, but then when it comes out on paper it's just as small again. how do I set my actual printer or my iMac to print the actual paper print larger?
Hello, it depends what App & Document type, some say PDFs have the font stuck at a certain sise, but say in Text Edit, open a document, Highlight some text the CMD+a to Select All, then type CMD+t to get the Font/Text size menu, select a bigger size.
-
I just recently bought the iPhone 5 and updated to the newest version of iTunes and I cannot make the ring"tones" tab appear. I even went to preferences and clicked on the "tones" button so that the "tones" tab would appear, and it won't appear. I reset the computer and everything. If someone could please tell me how to make the "tones" tab actually appear, that would be wonderful.
Thank you!Hi Friend,
In iTunes,
Click Edit --> Preferences --> General Icon Ensure that
Ringtones is checked. If not, check it then click OK…
Hope it will be helpful -
I put my iPod charging, but it wont charge. The Apple logo appears on the screen for five seconds and then it goes off again. Afterwards, it does it again and again and again. I can leave it 1 hour or day charging and it will be doing this the whole time. What should i do????????????????????????????????????????????????????????????????????????????? /
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
and
Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I cannot make the update of the iphone any more because the preceding owner made the jailbreak blow my telephone does not want to be re-ignited more and does not accept any restoration which must I make? thank you to help me
To put your iPhone back in jail do a restore.
This will put iPhone back into factory condition and you can get your updates (assuming you want the updates). -
I cannot figure out how to make the text larger in a received email. The finger method doesn't work and I can find no tool bar as I can for composing emails. I can find nothing in settings. Please help and thank you in advance.
Hi there,
Download a piece of software called TinkerTool - that might just solve your problem. I have used it myself to change the system fonts on my iMac. It is software and not an app.
Good wishes,
John. -
My macbook will not boot. It goes to a blue screen after the logo and wheel goes off. I have taken the battery out and held the on/off button for five seconds and reset the PRAM. I have the the original os disk but have not put it in for fear of losing un backed op data.
Thanks
RichYou won't lose any data unless you erase your hard drive.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c"key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it.When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've selected the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. -
My 5S shows that I have three unread text messages. However, I do not. I have checked everything I know to check and cannot make the little red 3 go away. Any ideas? This is super annoying.
While the action you describe is not normal for the iPhone, is this the only time that it has occurred or has it happened again? There are the normal user trobleshooting procedures that you can follow, power off/on, reset, restore, however, if it has not happened again, it sounds like an isolated incident that has not been duplicated.
Also, do you have a passcode lock on the phone to prevent others from accessing your data?
Message was edited by: ChrisJ4203 -
I'm trying to make an in-app purchase, but after entering my apple ID, amessage comes up stating I cannot make the purchase. That the ipad is not connected to the itunes store. My ipad is connected via wifi through the hotspot on my iphone. The ipad is also connected to my laptop with itunes opened. I don't understand what the issue is.
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
Cheers, Tom -
Hi I cannot make the accessibility zoom option work. What are the commands on a non Mac keyboard?
If you want to convert SWF to DVD in freeway, find a converter to convert SWF to normal video such as: SUPER, then burn to DVD.
-
I opened my iPod Touch up to fix my home button. When i closed it back up it had a white screen. I tried pressing lock and home button for 10 seconds and it worked but while i'm using it it goes white with lines on the screen. Help please. This has been happening for a while and i've tried everything but it doesn't work.
Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
when i open iphoto i see my photo's for 1 second and then they are gone .The photo's are still there but i can see them only on the bottom or top of my screen when i try to open them i get a sign that it is not possible.Can somebody please help me?
Have you upgraded to iPhoto 9.6 for compatibility with Yosemite? If not, try that first.
It looks like iPhoto has lost the connection between the thumbnails and the original image files.
This can be caused by a corrupted iPhoto library, or the originals have been deleted or moved.
Try first to rebuild your iPhoto Library:
If you do not have a current backup of the iPhoto library, make a copy of the library, but do not overwrite any previous backup.
Launch iPhoto with the ⌥⌘-key combination (option-command) held down.
Select "rebuild" from the first aid panel. This may take a while for a large library.
Can you now see your photos again?
If not, rebuild the library with iPhoto Library manager as described by Old Toad: Re: iphoto crashed -
My sons iPod touch stopped working, it won't charge in a docking station and the computer/itunes won't recognize it when connected. We have tried holding the power and home button at the same time for several seconds, and the screen still stays black. Thanks!
Hello skdog I possibly think your ipod touch is black because it has not charged. If your dock is broken it might just mean the dock will be broken and so might be the USB port. You should see an Apple shop nearby and hand it over and see what they can do. I hope this information works!
-
Bridge CS5...thumbnails. How can I make the thumbnails larger?
I can easily make my preview larger but cant seem to find anything to tell me how to make the thumbnails larger so they are easier
to see. Any suggestions?In the lower right corner there is a slider that will change the size of the thumbnails.
Maybe you are looking for
-
Can i run a servlet without a web.xml file for servlet mapping?
Hello everyone. The code i want to run compiles and everythink looks ok. It produces the .class file. I run Tomcat 4.1 and i build my Web site with Dreamweaver. I have a form in a page and i want to send the data upon form completion to a database i
-
Hello all, I just purchased a HP 6310 all-in-one printer. It installed just fine with my Win XP machine. I installed the software on the PB, but when I was asked to plug in the USB connection, no connection found. I use the USB ports all the time, so
-
Aggregation problem in Qery design
Hi folks, I have the following situation: - Characteristics as line items, shown as a hierarchie. - KFs and Formulars in columns I want the formulars to be calculated on the basis of a combination of two of the characteristics (the bottom two in the
-
External hard disc writeprotected
Hello...my hard disc seems to be protected in writing...ther'es a pencil with a slash...impossible to write anything on the external hard disc.....thanks
-
Install Admin Server as a Service
We are using: WLS - 10.3.6 (64 bit) SOA- 11.1.1.7 Windows Server 2008 R2 64 bit When I try to install Admin server as a service, I run into errors with the values assigned to java.protocol.handler.pkgs. The script generates a value of: oracle.mds.n