I cannot mount my hard drive volume!

Began a standard install of OS 9.2.2 and then my hard drive icon disappeared from the desktop. I opened drive setup from the utilities folder of the 9.2.2 cd and I cannot mount the volume no matter what. I can only start up from the cd holding down the c key and that's as far as I can go. Is this it for this powerbook? Trash time? HELP!

monkybiz,
If initialization failed, there is a problem with the HD. However, there is a process that may correct the problem or it will definitively tell you the HD is bad. HDs can fail at any time so it just may be coincidence the problem arose when trying to install software.
Since initializing the HD failed, apparently the computer can now see the HD. Boot to your MacOS 9.x CD and open the folder that says Utilities and launch Drive Setup. Highlight your HD's name in the window, then move up to the menu bar. Under Functions, select Initialization Options, then check the box for 'zero all data'. Also select MacOS Extended Format when that window appears. When the process has completed (it will take awhile), select 'Test Disk' under Functions (it will also take a while). If zeroing fails or Test Disk fails, try again to zero and then run Test Disk.
If successful, install software; if the above fails, your HD is hosed. By the way, once Drive Setup has been launched, Drive Setup Help is available from the menu bar.

Similar Messages

Cannot mount FAT32 Hard Drive in OX 10.5.8

I have a Mac mini running OSX 10.5.8
I also have a 2TB external hard drive, FAT32 that I use on various Macs and Windows 7 PCs
I use the Mac Mini to back up the external drive to a Drobo.
Today I went to back up the external drive and it would not mount. I don't know why. I've tried several different USB ports. I've run "Verify" and "Verify and Repair" and I get the message that it is verifying the drive, number of clusters, etc. but no errors that explain why it won't mount.
I've powered down and back up the Mac and still no avail.
The drive mounts fine on my Macbook running 10.8.2 and on my Windows 7 PCs but my backup software is on my Mac Mini and I need to figure out what's going on.
Anyone able to help?

Have you been able to resolve the issue with your Drobo? I'm having the same issue with my Drobo (which I've had a for a year) and suddenly, it's not being seen as a Drive.
The computer detects the disk, but it's not mounted.

Cannot mount USB Hard Drive (750GB LaCie Desktop Hard Disk USB2 K)

I recently purchased a 750GB LaCie Desktop Hard Disk USB2 K, and used it to back-up my NAS (Ready NAS NV+). Now I want to transfer some of this data on the Lacie at a separate location to a Time Capsule, via my MacBook. When I insert the USB cable into TC it seems to recognize the disk, but I cannot see the contents (I have a separate post on this).
WHen I insert the USB cable into my MacBook, I get the message:
"The Disk you inserted was not readable by this computer."
I (THOUGHT) I had formatted the disc as ext3, but do not recall (and cannot access my notes remotely). Is there anyway I can use disk utility to check the formatting, or does the message above give the game away?
Any thoughts appreciated!

I did not think that EXT3 support was built into OS X. There are various utilities around but I do not know how well they work and they would only be useful for the Macbook.
http://ekettoz.blogspot.com/2009/06/mounting-linux-ext2ext3-partitions.html
https://www.paragon-software.com/home/extfs-mac/
Have a look at these.

Screwed up my rc.conf. I cannot mount my hard drive

Hey guys. I screwed up rc.conf. It seems if I load gdm manually after logging in my mouse and keyboard work. But if it starts in rc.conf my mouse and keyboard do not work. It seems I need this
hald_enable="YES"
dbus_enable="YES"
gnome_enable="YES"
according to my installs on virtual box.(it did the same thing). Not sure why I made the same mistake again. Anyway I tried booting up the arch live cd and mounting my partition. I can mount my boot partition fine. sda1. I can mount my home partition fine. sda4. sda2 is swap. sda3 is what I need to mount but every time I do it mounts the freaking boot cd. What am I doing wrong.
fdisk -l comes up with sda1, sda2, sda3, sda4. There are no other partitions.
this is my command mount /dev/sda4 /mnt . This mounts my home partition fine and shows all my files. mount /dev/sda3 /mnt. Re mounts the cd.
Thanks for any help.
Last edited by dham (2010-02-23 17:22:42)

Then post the output of fdisk -l and blkid. This will show your partitions are aranged.
Instead of mounting on mnt try mounting in a folder of mnt. That what usually I do and most people do.
cd /mnt
mkdir arch
mount /dev/sda3 arch
and so on for each partition.

Mount external hard drive on boot

I have a Mac mini run on SL, I want to set it up as a samba server with a external hard drive which formatted in NFS format.
I tried to write a plist in LaunchDaemons to call a script to mount the hard drive, but it does not work.
Here is my plist
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.kg.mount</string>
<key>RunAtLoad</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/System/Library/script/com.kg.mount</string>
</array>
</dict>
</plist>
It get loaded at the start, if I user command 'launchctl list', I can see the service is loaded, but the disk is not mounted. If I run the plist manually after boot, the disk will be mounted.
Does somebody know how to mount a disk at boot time?
Thanks

The OS automatically mounts storage devices when they come online. If that doesn't happen, you need to fix the problem.
First back up the disk, if you haven't already done that.
Get rid of the script and the launchd item. Unload it first -- I assume you know how to do that.
Launch Disk Utility and select the "EX" volume, then run "Repair Disk." If any errors are reported, repeat until there are no more.
If the disk is now mounted, unmount it. Check the /Volumes directory for any empty subdirectories named "EX", "EX-1", or some such. If present, delete them.
Unplug the drive, then plug it in again. If it still doesn't mount, plug it into a different port (if it's USB.) If it still doesn't mount, try it on a different Mac.

I cannot earase my hard drive it says drive cannot unmounted?

i cannot earase my hard drive it says drive cannot unmounted? how can i erase it ? please help

Restart the Mac and start in Lion Recovery Mode by pressing Command-R before the startup chime.
Select Disk Utility.
Select the Macintosh HD volume
Click erase, wait till it finishes destroying all your stuff.
Weep cause your Mac won't boot no more.

Cannot find my hard drive connected to my extreme

Hi - I am using a Windows 7 PC and cannot find the hard drive connected to my airport extreme. I have gone into manaul set up on the extreme and asked it to share the files which it has confirmed, yet when I go into windows explorer I cannot see the drive at all ...... can I please ask for some assitance?

Just want to be sure of three things first if you don't mind:
Does the 802.11n AirPort Extreme Base Station (AEBSn) have a Base Station Name that includes a space? For example: My AirPort Extreme. If it does, rename it so that it does not have any spaces or use the underscore character between words.
Does the shared HDD have a volume name that includes a space? If it does, again, remove them or add underscore characters.
Is the HDD formatted in NTFS? If so, the AEBSn does the best job of sharing HDDs formatted in HFS+, then FAT32. It will NOT work properly with HDDs formatted in NTFS. If the HDD is very high capacity, you may want to borrow a friend's Mac to format it in HFS+ or get a utility that lets your PC format/read/write to HFS+ volumes. Regardless of it being formatted in HFS+, the AEBSn will share it out using both the AFP (for Macs) and SMB (for Windows/Linux) file sharing protocols ... so Windows PC should not have any difficulty accessing it.

Hard Drive Volumes Question:

So I got the files safely off of the Case Sensitive volumes... and then I erased the volumes so I could reformat them as not-case sensitive.
I used an OS X install DVD's "Restore" feature to accomplish this.
And now 9.2.2 won't load. =[ A diskette with a Question Mark Pops up instead. =[
Could it be that 9.2.2 is unable to load 16 hard drive volumes??
(I know, I am dumb) .....
I connected my old hard drive and I am using that. I am patiently waiting for a router to be delivered in the mail, and then I can set up as many computers as I'd like..... =]

Hi, In-Correct -
That info is good, but does not help too much.
Which of those two machines are you referring to re the issue expressed in this thread?
Since you mention a PCI card it is probably the Power Mac. If so, which model is it? A 350MHz model can be a G3 (B&W) or a G4 (AGP Graphics) model (and maybe a G4 (PCI Graphics) model).
Re the missing System Folder, you refer to 'volume' rather than 'drive'. If the volume you backed the OS(s) up to was another partition of the same drive which contained the volume you were reformatting, it is possible you inadvertantly reformatted (and hence erased) the entire drive rather than just a partition of it.
Again, having both drives connected, hence active, at the same time should be no problem - particularly if the 120GB drive is using a different controller, which the PCI card provides. All PowerMac machines are designed to handle multiple drives and volumes without conflict. The presence of an additional drive can not cause the erasure of another.
On the G4 (DA) model I'm using at the moment I have two internal drives, one partitioned into 4 volumes and the other partitioned into 5 volumes; those 9 volumes plus an external firewire drive give me a net of 10 volumes (in efferct 10 drives), most of which have OS's on them, all of which mount with every boot regardless of which volume and OS I choose for booting.

Boot from FireWire External Drive WITHOUT mounting internal Hard Drive

Is it possible too boot a PowerBook G4 over FireWire (this part works) WITHOUT mounting the internal hard drive at boot time - i.e. never mount the internal hard drive when booting from FireWire?
There is an Oreilly article at http://www.oreillynet.com/pub/h/341 which discusses using "niutil" but it is not clear how to indicate the internal hard drive should not be mounted.
The boot from FireWire works fine but how do you tell Mac OS X to ignore and never mount the internal hard drive? There used to be an /etc/fstab file where you could specify drives to mount. The /etc/fstab.hd file comments now say "IGNORE THIS FILE.
This file does nothing, contains no useful data, and might go away in
future releases. Do not depend on this file or its contents."
Thanks,

That is not the problem - I have been using the startup manager by holding down the option key during boot-up. I am having no problem getting the PowerBook to boot from the FireWire Drive.
*The Problem* is that after the PowerBook has booted from the exernal FireWire drive, I still see the internal hard drive of the PowerBook on the desktop. I do not want this. Some key points to note:
[1] I can unmount the interal hard drive and remove from the desktop only by using the Disk Utility in the Applications/Utilities folder. There is a button there to "unmount selected volume"
[2] The finder does not have an icon next to the internal hard drive icon to allow the internal hard drive to be unmounted when booted from a FireWire drive
[3] I want the MacOS X kernel to be configured to not automount any hard drive volumes at bootup - this used to be possible by editing the /etc/fstab.hd file but that file does not appear to be used any more per the commennts in the file.
**Remaining Question** How do you configure the MacOS X kernel to prevent it from mounting any other hard drive at boot time? I do not want to use methods [1] or [2]
Thanks

External hard drive shows up under internal hard drive volume?

History:
Purchased new Macbook Pro and Lightroom 2.
Migrated old Macbook to new Macbook Pro, including Lightroom 1.
Installed Lightroom 2 and updated to Lightroom 2.2.
Had Lightroom 1 images on multiple external hard drives. Moved all images to new 1tb and 1.5tb Lacie external drives.
Imported old catalog into Lightroom 2.2 and now one of the external (1.5tb) shows up under my internal hard drive in Lightroom.
internal hard drive>Volumes>external hard drive>empty image folders
A partial part of this external hard drive (some image folders) also shows up as it's own volume.
I started by selecting missing image folders and using the locate missing folder method. the folders then show up on: internal hard drive>Volumes>external hard drive>image folders
Any suggestions on how to remedy this problem?
thank you, Shawn

This is reparable, but an Adobe Tech did it. I had this problem some time ago and they fixed it. Dan Tull, one of the Adobe Techs, was accepting Catalogs for investigation and repair. Not sure if he still is.
I have not heard of such problems for a while.
Don

My motherboard "fried" on my computer when the fan quit working. I cannot access my hard drive on my old computer. I just downloaded ITunes on my new computer; assumed it would pull all my playlists in under my Apple ID and password-no such luck. Help?

My motherboard "fried" on my computer when the fan quit working. I cannot access my hard drive on my old computer. I just downloaded ITunes on my new computer; assumed it would pull all my playlists in under my Apple ID and password-no such luck. Help Please?

If your external drive does not have an independent power supply, you may wish to consider a couple of lower-cost options before tossing the drive. Bus-powered drives have no external power source and must get all their power from the computer. They can exceed the computer's USB energy budget.
Cheapest option:
1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
This gets power from two of the computers USB porst sna can provide enough power to wake up an under-performaing bus-powered drive.
If you don't have enough ports to use this, try the next cheapest option:
Newer Technology 7 Port Hi-Speed USB 2.0 Hub with Power Adapter for Mac & PC
Such a hub has a an independent power supply to make up for wahat the comptuer fails to provide.

Attempting to install Maverick, error message says I cannot use my hard drive as a start up disk.

The IT department where I work erased the hard drive and rebooted it to 10.7.5. In attempting to upgrade it to Maverick I encountered the error message saying that I cannot use this hard drive as the start up disk (or something to that effect). I read a couple of posts saying either to partition the hard drive or erase it entirely and boot from the recovery hard drive. Before doing any of that I booted using the option key, but did not find a recovery drive to boot to… only the disk0s2.
Some stats on my computer:
15-inch, late 2011
2.4 ghz intel core i7
AMD Radeon HD 6770M 1024 MB
C02H825CDV7P

The partition table is corrupt. Boot into Internet Recovery (option-command-R at the startup chime) and partition the drive with the default options (GUID format, one data partition.) The operation will destroy all data on the drive, so you'll have to restore from a backup.

Cannot access LaCie hard drives

I installed my new AEBS today. I installed all of the available software updates. I connected an HP LaserJet printer and two LaCie hard drives to the base station via a powered Dr. Bott T7 USB Hub. (My computer is a new MacBook Pro 17" running OS 10.4.10)
My wireless signal seems to be stable (using the AEBS in bridge mode connected to Qwest DSL wireless router).
The wireless printer connection works fine.
The problem is not being able to mount the hard drives. Both drives worked when connected directly to my MacBook, prior to connecting them to the AEBS.
Opening the AirPort Utility, I can see both drives listed under "Disks" (This pane shows storage devices connected to your base station). File sharing is enabled; Secure Shared Disks: With base station password; Guest Access: Not allowed.
I get the dialog box: "The AirPort Disk "name" became available. What do you want to do? Action: Connect with Password." I enter the password that I selected during set-up and select "Remember this password in my keychain." When I click OK, I get the error message "Connection Failed - unknown user, incorrect password, or login is disabled. Please re-type the login information or contact the disk's administrator." I have doubled-checked and re-entered this information.
I have tried turning the power off and on (both the AEBS and the hard drives) and restarting the computer.
What am I missing?

Hi,
I've been trying to work out the Hard Drive problems with the Airport Extreme for a few days and have had some success, so I'll share the info if its any use!
First of all, your printer and both hard drives all run off their own power supply, therefore, you don't need to have a powered usb hub, or just take the plug out and keep using the hub, save yourself a plug!
More importantly, I have had the same thing with the hard drive appearing in the Airport Utility yet whenever I try to connect, it comes up with an error and can't mount, although when I go to network and connect it appears but then goes wrong at the last part mounting, this is what I found...
the first time I plugged hard drive in all worked nicely, however, any time I have unplugged the power to the Aiport Extreme and connected again it'll show but never connect. When I went to make a few partitions I realised that if you unplug the router and repower, whatever HD name its seen before doesn't work until the HD name was changed again. For example....
I called my first HD to connect 'wifiHD', was working fine, next time i unplugged router was still showing in network but I couldn't mount it, I then plugged it to the mac and renamed it 'wifiDISK' for example and plugged it back into the router and it worked fine! Its very strange cos when I needed to unplug it last time I then had the same trouble and just renamed it back to 'wifiHD' it worked fine! Its a little flaw which is a right bugger to find so the bottom line is...
*RENAME THE HARD DRIVE EVERY TIME YOU UNPLUG THE ROUTER AND YOU CAN MOUNT IT AGAIN*
Another tip is format your HD in 'Mas OSX Extended' as it can be read by both mac and PC over the network. Then as windows isn't the best when you go to 'My Network Places' and 'Add Network Place' if you can't find the HD or even the router then enter
\\routername\\hardrivename\
in this format into the box, it'll take a mo but it'll then ask for the password! I personally have my hard drive guest access read + write so I entered
user: guest
password: base station password (or disk password as selected in airport utility)
and it all worked!
Sorry for the long explanation, hope this has helped!

I cannot open my hard drive...help please

I cannot open my hard drive.I have no idea why not.
Everything was perfectly fine this morning, I shut down, and nothing was different.
Later today I turned on the computer again to do some work, and when I click the hard drive icon it will not open, it seems that the whole finder or hard drive "resets" or "redoes itself"
No error message displays of any kind.
I have not installed anything or changed anything at all recently.NOTHING.
I already tried putting in my Tiger disc, and ran first aid, verified and repaired the preferences, and verified and repaired the disc, and after taking out the Tiger original disc...no, that didn't help either.
As far as I can tell everything else is fine, Safari works, my calculator and calendar and I Tunes and all that works fine.
HELP

UUUGGHHHH ... On a friends computer right now...
I had to start all over from the disc, after I, as the "other user" with (Admin. priviledges) went and tried to change the permissions of "original me", and it wouldn't let other user/me #2 do it, and so I kept trying, but then I couldn't get back into original me, it wouldn't let me login, kept saying you cannot login at this time, and I couldn't stay on Safari in user#2 long enough to try and write you before it "blinked out", so, I put in the original Tiger disc from the beginning and did an an archive install,BUT did not check the keep users and settings checkbox, so, my budget and things I was working on were kept intact....YEAH...but the original problem was never determined.
I hope that does not happen again, I still don't even know what caused it all in the first place.
THASNK YOU SO MUCH !!! for trying to help me.

I am having some issues getting OS X to mount the hard drive from my old laptop (Windows 7). Is there anything I can do to mount this?

I am having some issues getting OS X to mount the hard drive from my old laptop (Windows 7). Is there anything I can do to mount this?
It is not showing on the Desktop or the left colomn of Finder (Set to do both in Finder Prefernces) and is not showing up under the Disk application under Utilities (Sorry can't remember the name off the top of my head!)

cjz0r wrote:
...I'm starting to think it is most likely NTFS, am I looking at needing an Application to read the NTFS partitions on the drive?
You should be able to read NTFS formatted drives, just not write to them. For that matter, USB Flash drives generally come formatted NTFS for use with PC's and they have to be able to mount on a Mac in order to reformat them for Mac use. The Windows utilities supplied on those Flash drives will be deleted when the drive is reformatted for Mac use so I routinely copy them to the Mac desktop first before reformatting.
You might look into something like this http://eshop.macsales.com/item/NewerTech/U3NVSPATA/ if the enclosure is an issue. It looks weird but it works.

I cannot mount my hard drive volume!

Similar Messages

Maybe you are looking for