I cannot move my gadgets in iGoogle to make my homepage appear as it was previously. What happened?

Sometime over this weekend, my homepage has been altered. I use iGoogle and now data does not load into the gadgets. Nor, can I move gadgets where I want them on my homepage.

This happened to me too. I had notes on my iGoogle page and the data all disappeared. My date & time addon was empty. I just updated to Firefox 5 & the same problem persists. I'm about ready to give up on this browser- so many problems these past months.

Similar Messages

  • Ihave tons of music on itunes , but everytime i try to select it says "the original file cannot be found, would you like to try and locate it" i have no idea what happened to all of my music  any tips? i have a dell windows vista..  thanks !

    I have tons of music on itunes , but everytime i try to select it says "the original file cannot be found, would you like to try and locate it" i have no idea what happened to all of my music  any tips? i have a dell windows vista..  thanks !

    Basically, the computer thinks the music is 'lost'. Follow the prompts and try to locate it. It should navigate to the files and redraw the links which should make that pop up go away

  • I upgrade to ios7 today and now when I try to speak out a messae in messages or use siri niether works siri says it cannot take request right now, and messages just clocks and never types out the message, what happened?

    I upgrade to ios7 today and now when I try to speak out a messae in messages or use siri niether works siri says it cannot take request right now, and messages just clocks and never types out the message, what happened? Has anyone else had this issue today?

    What you are experiencing is 100% related to Malware.
    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • HT4623 I am downloading OS7 and get to the rescue email. I add the rescue email hit next and I cannot move on. How can I make this happen?

    I am downloading os7 and I cannot move on after loading rescue email and clicking next. Any ideas how to move on?

    Howdy neil1422,
    It might be worth attempting a restart of the iPhone, and then a reset, should restarting fail to resolve the issue.
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    Cheers,
    Allen

  • My Safari froze, I cannot quit it either. But other apps such as chrome works perfectly fine. What happened?

    My safari froze. I cannot quit it, but others like Chrome works perfectly fine. What happened?

    Hi s,
    Go to Apple menu > Force Quit.

  • I went to use my Itunes and suddenly i get files cannot be located ..do you want to locate .. well i cannopt find them what Happened they were al working before did i hit somethin or do something wrong please help have over 1700 songs missing

    I went to use my itunes music which i have had for years ..Suddenly they are all gone .. leaves a message cannot not be located would you like to locate .. I say yes and they cannot be found this is a list of 1700 songs .. Please help me .. where did they go?  And why! .. Need help desperately .. Must fix this ... Hope just a button i hit!   Thank you   ... 
            Jelliapple@ Optimum.net   ...

    Look in Windows Explorer, Music Library, My Music, iTunes, iTunes Media, Music which is where your library should be located. If it isn't there make sure you have the first two items on the advanced tab of the preferences ticked, then on the file menu select Library and Organise Library which should put all music remaining on your PC into the iTunes library. 
    Alternatively, if you can find where the music has become relocated to, move it into the automaticall 'add to iTunes' folder within itunes Media and it should then go back into your library.

  • Cannot move files or folders on desktop   OSX 10.7.5  MacBook Air

    Cannot move files or folders on the desktop. This occurred suddenly - don't know what happened or how to undo this. Nothing on the desktop is moveable.
    MacBook Air   OSX   10.7.5

    Take these steps if the cursor changes from an arrow to a white "prohibited" symbol when you try to move an icon on the Desktop.
    Sometimes the problem may be solved just by logging out or restarting the computer. Try that first, if you haven't already done it. Otherwise, continue.
    Select the icon of your home folder (a house) in the sidebar of a Finder window and open it. The Desktop folder is one of the subfolders. Select it and open the Info window. In the General section of the window, the Kind will be either Folder  or something else, such as Anything.
    If the Kind is Folder, uncheck the box marked Locked. Close the Info window and test.
    If the Kind is not Folder, make sure the Locked box is not checked and that you have Read & Write privileges in the  Sharing & Permissions section. Then close the Info window and do as follows.
    Back up all data before continuing.
    Triple-click anywhere in the line below on this page to select it:
    xattr -d com.apple.FinderInfo Desktop
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Paste into the Terminal window by pressing command-V. You should get a new line ending in a dollar sign ($). Quit Terminal.
    Relaunch the Finder.
    If the problem is now resolved, and if you use iPhoto, continue.
    Quit iPhoto if it's running. Launch it while holding down the option key. It will prompt you to select a library. Choose the one you want to use (not the Desktop folder.)

  • Suddenly, I cannot move photos from iStream directly to individual folders inside iPhoto. Any cure?

    Suddenly, I cannot move photos from iStream directly to individual folders, inside iPhoto. Any cure?

    What's "iStream"?
    You can't put photos into Folders in iPhoto. You can put them into Albums or Events.
    So, can you explain the problem you're having?

  • Cannot move more than 2 mailboxes from exchange 2007 to Exchange 2013

    I have been trying to move mailboxes from ex2007 to ex2013with the new-migrationbatch and the new-moverequest command.
    I have a DAG-cluster with two servers with all roles.
    What happens is that I cannot get more than two concurrent mailbox moves.  If I restart the MRS-service nothing happens. I have changed the config-file for the mailbox replication service and currently have these settings:
    MaxMoveHistoryLength="5"
    MaxActiveMovesPerSourceMDB="20"
    MaxActiveMovesPerTargetMDB="20"
    MaxActiveMovesPerSourceServer="100"
    MaxActiveMovesPerTargetServer="100"
    MaxTotalRequestsPerMRS="100"
    What is funny is that when I start a new batch with autocomplete off, only two mailboxes goes to 95% and the rest of them is not even started. 
    The command I use is  New-Migrationbatch -local -Name TestNew -csvdata ([System.IO.File]::ReadAllBytes("c:\temp\exchange\migration\testmigration.txt")) -targetdatabases mdb001,mdb002 -autostart
    Here is the output of Get-MigrationConfig | fl
    RunspaceId : d382f8a7-924a-4f0e-812e-f18970b632e2
    Identity :
    MaxNumberOfBatches : 100
    MaxConcurrentMigrations : Unlimited
    Features : MultiBatch
    CanSubmitNewBatch : True
    SupportsCutover : False
    I have off course restarted both servers and services.

    Just out of curiosity, on which server you made these changes? Mailbox or CAS? And on Target or Source Server? 
    Cheers,
    Gulab Prasad
    Technology Consultant
    Blog:
    http://www.exchangeranger.com    Twitter:
      LinkedIn:
       Check out CodeTwo’s tools for Exchange admins
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Cannot move [MOV filename]: It is in use by another person or program

    Hello. I have recently installed version 7.41 of Quicktime for Windows (had the same problem with 7.4). What appears to be happening is that when I boot my computer, without opening any programs, if I go to a location where I have a MOV (Quicktime movie file) file, and try to cut and paste it to another folder it gives me the message:
    Cannot move [MOV filename]: It is in use by another person or program. Close any programs that might be using the file and try again.
    I have found by using some memory/file monitoring tools that EXPLORER.EXE is opening a handle to the file (accessing it for some reason) and then holding on to that handle thus not allowing me to move the file from one directory to another. By forcing the handles closed, it then allows me to move it, but then immediately maintains it open again, and cannot move it again.
    This only happens with QuickTime MOV files. I have renamed the file to another format, just for kicks basically, and it works fine using another extension. I have also reassociated the MOV files with another app, but still has the same issues.
    I have not run or any applications before this point and especially not anything related to QuickTime. Does anyone have any insight into what might be happening?

    Hello akaMisterAnderson
    I am having the exact problem when I try to rename or move the MOV file. I use Unlocker to determine which process is locking the MOV file and like you have said: it is the Explorer process.
    I hope there will be a patch for this problem soon and if you know of any solution, please inform me.
    Thanks.

  • Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working

    Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working.
    I have tried reseting to factory settings by removing battery and holding down the power switch for more than 5 sec but this does nothing.
    Any ideas would be greatly appreciated as I think with so much unwanted data on the desktop and other places the whole os will crash very soon.
    Thanks, Rick

    The hard drive may be dying anyway, or the directory damaged because it is so full.  You should never let the hard drive get over 85% full.
    A -36 error is a read/write error.
    All you did with the power is reset the SMC.  Does nothing to reset everything to factory settings. 
    Do you have your original 10.4 installer discs for the MacBook?
    Is your data backed up?

  • Cannot delete messages from inbox, cannot move messages out of inbox, message do not copy to "sent" or "draft"

    The following problems occur:
    - cannot delete messages,
    - cannot move messages out of inbox,
    - messages do not copy "sent"
    - messages cannot be saved to "draft"
    This applies to imap and to gmail accounts.
    The following has not helped:
    - compact trash and other folder
    - deinstall and reinstall TB 31.4.
    - archive profile with mozbackup and replace profile from archive after reinstall of TB.
    - deinstall and reinstall TB 31.3 downgraded
    - delete all folders and files with "trash*" in the file name (all IMAP)
    - delete all files of 1 mail account completely in the TB profile and resync from server (IMAP)
    This might coincide with these system changes:
    - upgrade to TB 31.4.
    - some of these email accounts were installed on ios8 iphone.
    Not sure if the problems had already started before these 2 occurrences.
    Any help is appreciated to solve this.
    Thanks!
    fashi

    What type of mail account is this (POP, IMAP, .Mac)? If POP, what are your Preferences > Accounts > Advanced > Remove copy from server settings?
    You may be able to get rid of those messages in Mail doing Edit > Cut (⌘X) (for best results do it with one message or just a few at a time), but you should remove them from the server first if they’re still there.
    Does this account allow web access? If not, you may find the Account Info window useful to solve this problem — choose Get Info (⌘I) from the Action menu (gear icon) located below the mailboxes list in the main Mail window.

  • Print message print cartridge cannot move because of paper jam but the paper jam has been cleared.

    My Envy 4502 printer message window says that the print cartridge cannot move and to clear any paper jam obstruction.  There was a paper jam and I cleared it but the message "the print cartridge cannot move and to clear any paper jam obstruction" remains there and I cannot remove it or get the printer to print.  I tried everythng listed in the troubleshooting section of the help guide in the software.  I uninstalled the printer and then reinstalled it which didn't help  in the slightest--the message about the print cartridge is still there.  I also tried unplugging the printer overnight (to try to clear the memory)  and this also did not help--that message is still there.  By the way, I can easily move the printer cartridge by hand and I can hear the cartridge moving when the printer attempts to work.  I would appreciate any help from anyone to get my printer to  work again!

    Hi Cat2c,
    Welcome to the hp support forum,
    Thank you for your query.
    Please find steps to remove paper jam.
    Hope this helps
    I am a HP Employee.
    The opinions expressed here are my personal opinions, not of HP.
    Make it easier for other people to find solutions, by marking an answer “Accept as Solution” if it solves your problem.
    Click on Thumbs up if my post helped you.

  • I rented a movie on my iPad but cannot move it to my computer to watch on tv via Apple tv. How do I transfer the rented movie to my computer?

    I rented a movie on my iPad but cannot move it to my computer to watch on tv via Apple tv. How do I transfer the rented movie to my computer?

    I just rented a movie from my iPad2 and tried to play it through my ATV2 with AirPlay and same problem.... This is absurd guys. Apple I know there are copyright hoops to jump through but come on!! The whole pitch behind AirPlay and AppleTV was to make it easy to watch my purchases on my TV no matter what device they were on. Now I've got to hold my iPad in front of my face to watch a movie for nearly 3 hours!! And when I go to the support site I have no option other than to send an email to billing, screw this. I've not bought a DVD since I purchased my ATV2 over a year ago but if you guys are gonna pull this crap then what incentive do I have to continue the use of something that may or may not work the way it was advertised.
    By the way, this is the first time I've had this problem because I normally rent straight off the ATV or my computer, which by the way I was considering replacing my PC with an iPad but looks like you guys aren't ready for me to make that kind of a switch.
    Don't tell us that a product will do XY and Z then put limits on Y sending to Z.
    FIX THIS!!!

  • I have iPhoto 08 and have been happy with it. Don't want to upgrade. But suddenly, when I click on an event, instead of all the photos, I just get one- enlarged- and cannot move to the next one. The photo just jumps up or down.  How to solve?

    I have posted "submit" twice and keep getting requests to submit again.  Now being asked to write a summary! Here we go.  I have iPhoto 08 and am happy with it.  Don't want to upgrade. But suddenly when I click on an event, instead of getting all the photos, I just get a large version of one photo and cannot move on to the others.  The right arrow will not move it and the photo just jumps around.

    Note the slider bottom right of the iPhoto Window. Drag it left.

Maybe you are looking for

  • How to create one node for multiple instances of hardware

    I want a single minor device node to act as the interface to all instances of my hardware, in this case a co-processor chip on the     PCI bus. For the number of chips found at boot time, I want requests to be dispatched, one per chip, in a round-rob

  • Mac Pro 2010: Does it matter which HD Bay you run the OS from?

    I have had a slight vibration problem emanating from the front grill of my 2010 Mac Pro. I thought it might have started since I installed the IcyDock adaptor which holds the OWC SSD (128GB) which I use as the boot and applications drive in Bay 1, bu

  • Unable to switch from Tall Talk (Virgin) to BT Inf...

    When Virgin moved its ADSL customers to Talk Talk and BT enabled Infinity where I lived, I thought this was the time to move to BT Infinity. My first order was place on the 3 Feb and I have had multiple orders ever since with no real explanation to t

  • Time taking for inner joins in select

    Hi all, I am using inner join on 3 tables  ( PLKO,PLPO,PLAS) for the materials, it is taking database time 20% and abap time 78 %  and when i am using FM CARO_ROUTING_READ database time 48% and abap 52%. i am in confusion which is th ebest method to

  • Planning Oracle in e-business Solution

    My company is in the process of evaluating Oracle in conjunction with a -business software package. Potentially the clients On-Line to the Database could be in the thousands at any one time. Are there any guidelines as to what configurations you shou