I cannot move my info. to webOS

I have a Google account and followed the instructions on how to upload my contacts and calendar from my desktop, but every time I try, I get an error message, "Sorry, we could not recognize the file format." Google asks for a .csv file format, but my files are listed as:
Palm/DA/address and
Palm/DA/datebook
without any .*** format ending.
I had an old Palm Desktop version (4.2) and upgraded to 6.2.2, but that didn't help.
I also searched for files with .csv formats, but I don't have any.
I would appreciate any help. Thanks!

Thanks for your responses. It helps when you know someone is listening.
As far as the instructions I used, since I have close to 3,500 contacts, these instructions:
http://www.palm.com/us/support/downloads/pre/migration/dta_windows.html
said I should upload directly to my service - Google and directed me to their instructions:
http://mail.google.com/support/bin/answer.py?answer=14024
I Exported a .csv file for my Contacts to a place on my hard drive and then tried to Import it from the Google Contacts page. (I don't know how to Export it directly from my Desktop.) That's when I got the error message, "Sorry, we could not recognize the file format.".
As far as my Calendar, when I tried to Export it, there was only one "Export type" available: .dba (Date Book Archive); no .csv option.
Yes, I may have to go with the CompanionLink option, but I liked the idea of synching to the web. But now, with reading of all the problems with webOS it might not be worth it.

Similar Messages

Cannot delete messages from inbox, cannot move messages out of inbox, message do not copy to "sent" or "draft"

The following problems occur:
- cannot delete messages,
- cannot move messages out of inbox,
- messages do not copy "sent"
- messages cannot be saved to "draft"
This applies to imap and to gmail accounts.
The following has not helped:
- compact trash and other folder
- deinstall and reinstall TB 31.4.
- archive profile with mozbackup and replace profile from archive after reinstall of TB.
- deinstall and reinstall TB 31.3 downgraded
- delete all folders and files with "trash*" in the file name (all IMAP)
- delete all files of 1 mail account completely in the TB profile and resync from server (IMAP)
This might coincide with these system changes:
- upgrade to TB 31.4.
- some of these email accounts were installed on ios8 iphone.
Not sure if the problems had already started before these 2 occurrences.
Any help is appreciated to solve this.
Thanks!
fashi

What type of mail account is this (POP, IMAP, .Mac)? If POP, what are your Preferences > Accounts > Advanced > Remove copy from server settings?
You may be able to get rid of those messages in Mail doing Edit > Cut (⌘X) (for best results do it with one message or just a few at a time), but you should remove them from the server first if they’re still there.
Does this account allow web access? If not, you may find the Account Info window useful to solve this problem — choose Get Info (⌘I) from the Action menu (gear icon) located below the mailboxes list in the main Mail window.

Hi, I have 5 locked fonts on my desktop, G5 PPC, and cannot move to trash and delete. Anyone know how to delete these font icons? Thanks for helping.

Hi, I have 5 locked fonts on my desktop, G5 PPC, and cannot move to trash and delete. Anyone know how to delete these font icons? Thanks for helping.

Select them in the Finder, choose Get Info from the File menu, and clear the Locked box.
(59958)

Beginners Q: Motion tracking - Cannot move trackpoint

Hi all,
this seems to be simple: start motion tracking, move your trackpoint to the correct place that needs to be tracked.
Problem: I see the trackpoint, but cannot move it to its place.
The only way to do that, is to close AE, reopen AE & reopen the project, and continu moving the trackpoint.
This is only possible to do so for a few frames, then the trackpoint is fixed again, and moving is not possible anymore.
This topic seems not to be found on the internet, so I suspect a bug maybe.
Please help, it's driving me nuts...
any help is welcome...
-Edit1-
And as I saw an OpenGL error I'm providing also system info below.
SW:
AE CS6, trial version, no extra's installed. ver. 11.0.0.378
Windows 7 Home Premium, SP1, build 7601, 64bit
Driver pack ver. 8.98-120611a-141402C-ATI
2D driver ver. 8.01.01.1253
OpenGL ver. 6.14.10.11733
Direct3D ver. 9.14.10.0920
Catalyst Control Center Ver: 2012.0611.1251.21046
Used Render Multiple Frames Simultaneously multiprocessing: With & Without.
HW:
16Gb Ram
i7-3770K CPU @3.5MHz, 64Bit
Graph Chipset: AMD Radeon HD 6800 Series
-Edit2-
The more I mess around with it, the more I see the proof I need to restart AE to continue follow the same actions as in tutors over the net.
VERY often, I cannot move object with the mouse cursor like text objects for instance.
Is there anything I can do??

Hi thx for replying,
If I remember well, the error message was a general OpenGl one.
I did have the error message not that often unfortunately.
Graphic card is updated to latest version.
It's very annoying I cannot drag&drop after a while...

Cannot move files into folders on desktop

Hi, I cannot move files into folders on desktop. They won't go in when I grab them and drag them to a folder.

Take these steps if the cursor changes from an arrow to a white "prohibited" symbol when you try to move an icon on the Desktop.
Sometimes the problem may be solved just by logging out or restarting the computer. Try that first, if you haven't already done it. Otherwise, continue.
Select the icon of your home folder (a house) in the sidebar of a Finder window and open it. The Desktop folder is one of the subfolders. Select it and open the Info window. In the General section of the window, the Kind will be either Folder or something else, such as Anything.
If the Kind is Folder, uncheck the box marked Locked. Close the Info window and test.
If the Kind is not Folder, make sure the Locked box is not checked and that you have Read & Write privileges in the Sharing & Permissions section. Then close the Info window and do as follows.
Back up all data before continuing.
Triple-click anywhere in the line below on this page to select it:
xattr -d com.apple.FinderInfo Desktop
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. You should get a new line ending in a dollar sign ($). Quit Terminal.
Relaunch the Finder.
If the problem is now resolved, and if you use iPhoto, continue.
Quit iPhoto if it's running. Launch it while holding down the option key. It will prompt you to select a library. Choose the one you want to use (not the Desktop folder.)

Cannot move files or folders on desktop OSX 10.7.5 MacBook Air

Cannot move files or folders on the desktop. This occurred suddenly - don't know what happened or how to undo this. Nothing on the desktop is moveable.
MacBook Air OSX 10.7.5

Take these steps if the cursor changes from an arrow to a white "prohibited" symbol when you try to move an icon on the Desktop.
Sometimes the problem may be solved just by logging out or restarting the computer. Try that first, if you haven't already done it. Otherwise, continue.
Select the icon of your home folder (a house) in the sidebar of a Finder window and open it. The Desktop folder is one of the subfolders. Select it and open the Info window. In the General section of the window, the Kind will be either Folder or something else, such as Anything.
If the Kind is Folder, uncheck the box marked Locked. Close the Info window and test.
If the Kind is not Folder, make sure the Locked box is not checked and that you have Read & Write privileges in the Sharing & Permissions section. Then close the Info window and do as follows.
Back up all data before continuing.
Triple-click anywhere in the line below on this page to select it:
xattr -d com.apple.FinderInfo Desktop
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. You should get a new line ending in a dollar sign ($). Quit Terminal.
Relaunch the Finder.
If the problem is now resolved, and if you use iPhoto, continue.
Quit iPhoto if it's running. Launch it while holding down the option key. It will prompt you to select a library. Choose the one you want to use (not the Desktop folder.)

Cannot move a ringtone to the tones folder

Can anyone help please...this is driving us round the bend!!!
We have been trying to create a ringtone from a song in iTunes but cannot move it to the tones folder. We have followed all the instructions available on-line and changed the song to an AAC file, reduced it to under 30 seconds etc etc. It is described as a ringtone in the Get Info box but we cannot move it to the Tones folder in the library and therefore cannot sync to the iphone.
Many thanks

Changed the extension?
When posting this kind of question it helps us to know which directions you followed by posting a link. Some people carefully follow direction to do things such as moving their "itunes library", then we find the directions they followed were for just moving itunes media and not the whole library.
https://discussions.apple.com/message/17777381 - making a ringtone

Cannot move/delete locked infoobjects

Hi,
In one of my ODS object, I want to move some info objects from Data Fileds to Key fields. When I am trying to do this, getting an error "cannot move/delete locked infoobjects".
I have deleted all the data from the ODS and then tried. Even though it is giving the same error.
Thanks
Ramesh Ganji

Pl try the following:
1. Delete the data in the ODS and try to change the ODS.
2.Delete the data in the master data table of the object that you wish to shullfe anf try to change the ODS>
3. If you have loaded another ODS or cube from this ODS, delete data from there as well and then try the change.
4. FInally, check if you see any entries in St12 and unlock them.
Ravi Thotahdri

Cannot move [MOV filename]: It is in use by another person or program

Hello. I have recently installed version 7.41 of Quicktime for Windows (had the same problem with 7.4). What appears to be happening is that when I boot my computer, without opening any programs, if I go to a location where I have a MOV (Quicktime movie file) file, and try to cut and paste it to another folder it gives me the message:
Cannot move [MOV filename]: It is in use by another person or program. Close any programs that might be using the file and try again.
I have found by using some memory/file monitoring tools that EXPLORER.EXE is opening a handle to the file (accessing it for some reason) and then holding on to that handle thus not allowing me to move the file from one directory to another. By forcing the handles closed, it then allows me to move it, but then immediately maintains it open again, and cannot move it again.
This only happens with QuickTime MOV files. I have renamed the file to another format, just for kicks basically, and it works fine using another extension. I have also reassociated the MOV files with another app, but still has the same issues.
I have not run or any applications before this point and especially not anything related to QuickTime. Does anyone have any insight into what might be happening?

Hello akaMisterAnderson
I am having the exact problem when I try to rename or move the MOV file. I use Unlocker to determine which process is locking the MOV file and like you have said: it is the Explorer process.
I hope there will be a patch for this problem soon and if you know of any solution, please inform me.
Thanks.

Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working

Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working.
I have tried reseting to factory settings by removing battery and holding down the power switch for more than 5 sec but this does nothing.
Any ideas would be greatly appreciated as I think with so much unwanted data on the desktop and other places the whole os will crash very soon.
Thanks, Rick

The hard drive may be dying anyway, or the directory damaged because it is so full. You should never let the hard drive get over 85% full.
A -36 error is a read/write error.
All you did with the power is reset the SMC. Does nothing to reset everything to factory settings.
Do you have your original 10.4 installer discs for the MacBook?
Is your data backed up?

Print message print cartridge cannot move because of paper jam but the paper jam has been cleared.

My Envy 4502 printer message window says that the print cartridge cannot move and to clear any paper jam obstruction. There was a paper jam and I cleared it but the message "the print cartridge cannot move and to clear any paper jam obstruction" remains there and I cannot remove it or get the printer to print. I tried everythng listed in the troubleshooting section of the help guide in the software. I uninstalled the printer and then reinstalled it which didn't help in the slightest--the message about the print cartridge is still there. I also tried unplugging the printer overnight (to try to clear the memory) and this also did not help--that message is still there. By the way, I can easily move the printer cartridge by hand and I can hear the cartridge moving when the printer attempts to work. I would appreciate any help from anyone to get my printer to work again!

Hi Cat2c,
Welcome to the hp support forum,
Thank you for your query.
Please find steps to remove paper jam.
Hope this helps
I am a HP Employee.
The opinions expressed here are my personal opinions, not of HP.
Make it easier for other people to find solutions, by marking an answer “Accept as Solution” if it solves your problem.
Click on Thumbs up if my post helped you.

How do move itunes info (musice etc) from one apple ID to another apple ID?

ow do move itunes info (musice etc) from one apple ID to another apple ID?

Click here and request assistance.
(80562)

I rented a movie on my iPad but cannot move it to my computer to watch on tv via Apple tv. How do I transfer the rented movie to my computer?

I rented a movie on my iPad but cannot move it to my computer to watch on tv via Apple tv. How do I transfer the rented movie to my computer?

I just rented a movie from my iPad2 and tried to play it through my ATV2 with AirPlay and same problem.... This is absurd guys. Apple I know there are copyright hoops to jump through but come on!! The whole pitch behind AirPlay and AppleTV was to make it easy to watch my purchases on my TV no matter what device they were on. Now I've got to hold my iPad in front of my face to watch a movie for nearly 3 hours!! And when I go to the support site I have no option other than to send an email to billing, screw this. I've not bought a DVD since I purchased my ATV2 over a year ago but if you guys are gonna pull this crap then what incentive do I have to continue the use of something that may or may not work the way it was advertised.
By the way, this is the first time I've had this problem because I normally rent straight off the ATV or my computer, which by the way I was considering replacing my PC with an iPad but looks like you guys aren't ready for me to make that kind of a switch.
Don't tell us that a product will do XY and Z then put limits on Y sending to Z.
FIX THIS!!!

I have iPhoto 08 and have been happy with it. Don't want to upgrade. But suddenly, when I click on an event, instead of all the photos, I just get one- enlarged- and cannot move to the next one. The photo just jumps up or down. How to solve?

I have posted "submit" twice and keep getting requests to submit again. Now being asked to write a summary! Here we go. I have iPhoto 08 and am happy with it. Don't want to upgrade. But suddenly when I click on an event, instead of getting all the photos, I just get a large version of one photo and cannot move on to the others. The right arrow will not move it and the photo just jumps around.

Note the slider bottom right of the iPhoto Window. Drag it left.

I cannot move, resize, minimize, or close the browser window despite everything inside the window still working.

I don't know what details are needed so I'll just rattle off anything that I can think of.
I am running an Asus laptop with windows 7. I have never had an issue with firefox in the past (beyond the usual freezing and some obvious issues with pop up ads that are par for the course with firefox since adblocker never does what it says.... not really. Lets be honest.) I am using Avast for my virus protection and it is also up to date.
My issue started about an hour ago when firefox stopped responding. The video I had playing kept going but I could not interact with anything. Assuming the program froze for the billionth time that week I rebooted it. This has always solved freezing issues in the past. Now, however, firefox is doing something new.
I can access the menus and almost everything on the window itself except for the minimize/maximize/close buttons, I cannot move the window at all, and I cannot manually resize it. I have also noticed that although videos will play, I can only click on their buttons if there is another smaller window overtop of firefox. The video controls will only appear that way and when I click them firefox naturally comes to the front and the video responds with the button I used but the buttons are gone again and I cannot resume playing without the smaller window back in front to make the buttons show again.
It's as if half of firefox is frozen while the other half is still running somehow.
I have no themes that could be causing this. Literally none. I only use firefox for the things that can no longer be opened in Opera so I have no need for any theme beyond default. The only addons I installed on purpose were adblockers (lord knows why. they don't DO anything.) though several other random things seem to have been installed over time to aid in one thing or another. Various plugins and players and versions of java, that sort of thing. But I have everything (and i mean EVERYTHING) in the addon menu disabled.
I have tried booting it up in safe mode (the program, not windows) and the problem is still there except now it won't show the menu bar at all unless I press the alt key first and even then it wont let me actually click on anything in the menu bar. When I try the whole bar vanishes. I had to close firefox with the task manager.
Rebooting will fix the issue for about 15 seconds before it all comes back.
Any attempts at updating have failed as it says I am already up to date on everything so I don't know what its issue is.
It's not an urgent issue right now as most of what i need to do can be done on the half screen window I am using, but some of my sites have buttons that literally vanish in anything but full screen and I imagine that this will be a much greater annoyance within a few days.

After following all the instructions given, I poked around safe websites as suggested. I am not sure why this step was needed, as websites functioned rather normally before I came here but I did it anyways and found that the websites still work the same as they did. I can still do everything I used to be able to do. I see no change in the function of the websites.
However, I still cannot resize, close, or move the browser window. I don't know if Netflix is a safe site or not (too many conflicting opinions on that one from the masses) so I don't know if the issue with the vanishing buttons is still there, but all the issues I had with the browser window itself is still there.
Even in safe mode the browsers three window control buttons on the top right refuse to let me use them and the window itself will refuse to be moved around.

I cannot move my info. to webOS

Similar Messages

Maybe you are looking for