I cannot open a eps file in CS5 Illustrator

I downloaded an .eps directly from Shutterstock onto a PC which opened it no problem in CS5. when I try to open it up on my Mac in CS5 also it says "cannot open or convert to pdf" I have other eps files that open no problem.
I have paid for these files so I really need to open them..
Any Ideas?

Thank you... it totally worked and now I can finish my project... and I now know something new..

Similar Messages

I just downloaded the trial version of Photoshop CS6. And cannot open adobe eps files ?

I have installed Photoshop CS6 and cannot open adobe eps files? any Ideas

Hi there
When you say that you can't open eps files, are you getting an error message?
Photoshop CS6 has the ability to open both .eps and .ai files. However, opening by going to File > Open... will rasterize the image - meaning that it is no long a vector so you can't scale it up and down without losing quality. To open an .eps or .ai file in Photoshop and maintain its vector capabilities, try the following:
Create a new canvas in Photoshop. Then, go to File > Place...
After selecting your file from the Place dialog box, your image will be placed into your canvas. Resize accordingly, and then hit Enter on your keyboard.
The image you just placed is a Smart Object, meaning that it has retained its vector capabilities and can be resized without losing image quality. If you ever need to rasterized this image, just right click on the layer and select Rasterize Layer.
If you are still having trouble, please post here again so that we can provide additional assistance.
Cheers!
Kendall

After updating photoshop CS5 to 12.0.4 x32 (windows) I cannot open my documents/files or create new

I had the problem before. Reinstalled Photoshop CS5 and updated again.
Clicking a file starts Photoshop but does not open the file.
If I click "new" to make a new file, nothing happens.
Help....!!!!!!

Hi PE
Yes, but nothing happened.
I was instructed to press some key during startup of Photoshop, and it should reset the program.
However, it did not work.
Br
Lars Hansson
Den 29/10/2013 kl. 11.49 skrev PECourtejoie <[email protected]>:
Re: After updating photoshop CS5 to 12.0.4 x32 (windows) I cannot open my documents/files or create new
created by PECourtejoie in Photoshop General Discussion - View the full discussion
Hansson, did you get a window asking you if you wanted to reset your preferences.
Maggedotno, is it the english version? Do you have third party plug-ins? Can you post the contents of help>system info?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5796463#5796463
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5796463#5796463
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5796463#5796463. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Unknown Error while opening an eps file!!

Hi,
While trying to open an eps file in AI, I get the following error. Am not able to figure as to y am getting this.
"The operation cannot complete because of an unknwon error".
Can anyone tell me whats causing this?
Thanks,
Anand

Hi
Has anyone have any further insights?
I have had this problem years ago with EPS files which were created under legacy systems but am unable to resolve the "unable to convert" error message. I am technical and have already tried all of the suggestions here and others to no avail.
I am working on a Mac and have not tried opening this file on a PC.
I am attaching my file.
good luck and thanks for any help!
jim

Opening a CS4 file in CS5

A friend of mine was working on a project of ours, using CS4. I have CS5, and no matter what settings/preferences I change, I cannot open any PSD files he sends me. I can't find any help on the problem anywhere, it seems to be unique to our situation. Sending a jpeg or png isn't really an option if we want to keep our layers, which we do.
Any ideas on what we can do? We tried setting maximize PSD and PSB file compatibilty to Always, as well as allowing CS5 to utilize all of the system's RAM and still nothing. Is it a problem with CS5 not being backwards compatable? Or is there some setting in CS4 that needs to be changed for CS5 to be able to open the files?

Scubasage281 wrote:
...It's still odd that we can't open PSD files though.
c.pfaffenbichler wrote:
...How are the files transferred...?
If you want to understand why PSD is not working, it would help to answer how the files are transferred.
If transferred via the internets/email, try zipping the PSD file first. Some mail programs attempt to rewrite (and mangle) PSD files to make them smaller for email. Some mail programs and servers also misinterpret the PSD filetype.
You might get around this by packing the PSD files in a ZIP archive.

"You cannot open the application "Adobe Photoshop CS5.1" Because it isnotsupportedon this architectu

I have a Mac OS 10.5.8, 2GHz Intel Core 2 Duo, and although I have succesfully installed the photoshop files, they will not open. When I try to open it the comptuer says "You cannot open the application "Adobe Photoshop CS5.1" because it is not supported by this architecture." Does anyone know what the hell this means or what I should do? Thanks

Emmasrisd has it ever worked on this computer previously? If so what has changed did you install new software or make any upgrades to the computer? Have you also tried removing the software and reinstalling? If so did you receive any error messages during the installation process? Finally if you have tried to uninstall did you remove the program using the uninstaller located in Applications/Utilities/Adobe Installers.

I cannot open this PDF file in Acrobat 8 Pro or in Acrobat Reader on Windows 7 64-bit

I have a PDF file that I could open on my Windows XP 32-bit laptop in Acrobat 8 Pro or in Acrobat Reader. I then upgraded to a Windows 7 64-bit laptop. But now in Win7-64, I cannot open this same file using the same apps (Acrobat 8 Pro & Acrobat Reader XI).
When I try to open it in Acrobat 8, it does not load and instead a popup windows appears saying -
Adobe Updater
Some components needed to complete this operation are missing but information about them may be available on the Adobe website. Would you like to search the Adobe website for the missing components?
And I can choose either the OK or Quit buttons. When I click OK, a web browser starts and goes to this website -
http://www.adobe.com/special/adobe_update_manager/?type=Filter&name=FOPN_foweb&version=0.0 .0.0&lang=en_US&os=Windows&osver=6.1.7601&appid=acrobat8pro-en_US&cpu=intel
This webpage says -
Adobe Update Manager
Adobe cannot locate the requested plugin. New plugins will be listed on this page. Currently there are no plugins.
So now I am stuck, no direction to go. I am left without any solution from Adobe for Acrobat on this file.
When I try to open this PDF file in Reader, it does not load and instead a web browser is spawned loading the webpage -
http://plugin.fileopen.com/Default.aspx?bhcp=1
This is the FileOpen Plug-in for Adobe Acrobat/Reader, which prompts to -
Please click OK to download the FileOpen Plug-in Installer for Adobe Acrobat/Reader
I click on OK, download and run the Installer file, accept the terms, and installed the FileOpen Client (x64) B928. Upon completion, it prompts to Finish. But it does not automatically bring Reader up or try to load the file. So I try again to load the PDF file into Reader. But once again, the file does not load and the web browser is spawned loading the same FileOpen Plug-in Installer link. I click OK again, and start the same FileOpen Client process. This time, it recognizes that I have FileOpen Client installed, and the window gives me two choices, Repair or Remove. So since I apparently need this Plug-in, I choose Repair. The process seems to complete the Repair. But when I try to load the file, it still brings me back to the FileOpen Plug-in webpage. So now I am stuck again, and left without any solution from Adobe for Reader on this file.
I tried Adobe support. But apparently Adobe does not support past releases of their products (Acrobat 8), and also does not give free support for the current version of their free products (Reader XI).
Can this be fixed?

How is Acrobat 8 not fully Windows 7 compatible? I see discussions on this Adobe Community saying how Acrobat 8 does work on Windows 7 and with 64-bit. It appears that if Acrobat 8 is updated to the latest version, then this should fix AA8-Win7 issues. And I am at the latest AA8 version, 8.3.1.
And how are Acrobat 8 and Reader XI are not compatible? I have always had Acrobat and Reader installed on the same PC, without ever having any issues. And Adobe allows the installation of one after the other. So apparently Adobe allows them both to exist together. If they are incompatible, then why would Adobe allow them to exist together?
Anyway, I did uninstall the FileOpen Plug-in and the Reader XI, then reinstalled the FileOpen Plug-in. So now Reader is not installed and only Acrobat 8 is installed. I then tried to load the PDF file, but I still get the Acrobat 8 error described above.

I cannot open a pdf file with aole-mail. I can open pdf files from windows explorer. I have associated pdf with adobe reader. My operating system is window

I cannot open a pdf file with aol e-mail. I went to preferences in Adobe Reader but did not know what to enter for Incoming IMAP and outgoing SMTP. I can open pdf files from windows explorer as I have associated .pdf files with adobe reader. My operating system is windows 7.
When I try to open the pdf file within aol e-mail I get a message: 'Your security settings do not allow this file to be downloaded'. I have not changed my security settings (Tools, Internet Options, security).

Or http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

I recently loaded OSX mavericks on my Imac. I now find I cannot open any Adobe products from CS5. The error message reads " to open Adobe illustrator CS5.app, you need to install a JAva SE 6 runtime. Would you like to check and install one?

I recently loaded OSX mavericks on my Imac. I now find I cannot open any Adobe products from CS5. The error message reads " to open Adobe illustrator CS5.app, you need to install a JAva SE 6 runtime. Would you like to check and install one? I try to install but get the error" download error". As far as i know I'm using Adobe Java 7. None of my CS5 suite works anymore............and i really dont want to upgrade to a monthly cloud service fee as i hate this policy with a passion.

This goes for Dreamweaver CC on Mavericks!!!!! THANK YOU!
I couldn't launch Dreamweaver CC. An error told me to install "java se 6 runtime". But when I clicked OK I got another error telling me there is a network problem! I found this forum post on CS6 products, so I tried the download link, installed java 6 and presto, it worked! Thanks!

Cannot open my NEF files in Photoshop CS6 from my new Nikon D800 camera.

That's it, I Cannot open my NEF files in Photoshop CS6 Camera Raw from my new Nikon D800 camera. What am I doing wrong or what is wrong? I have the plug-in Camera Raw 7. and can open TIFF files but not the NEF files.
Peace,
Charles Fennen

Hi ssprengel,
to explain the scenario, i am basically a D7000 user and I do post production with Windows computer. But for an assignment I have hired D800, they have provided me their SD memory card. I have used the same memory card while shooting.
I have transferred the NEF files from the camera using Nikon software. The transfer was successful but i am not able to open the Raw NEF file with ACR. Even my plugins are updated till date.
The NEF thumbnails are having small lock logo in the bottom left corner. I do not know what does that mean. Like this.
Kindly let me know what would be the prob? if my RAW files are corrupted kindly let me know how will I recover them?
Thank you.

I am trying to now install a free trial of indesign because despite paying $50+ a month for this supposed service I cannot open an indesign file I've been sent and need to do work on it urgently. I have now signed in again for a free one month trial and i

i am trying to now install a free trial of indesign because despite paying $50+ a month for this supposed service I cannot open an indesign file I've been sent and need to do work on it urgently. I have now signed in again for a free one month trial and it claims to be downloading but this is not happening at all. I am on a Macbook Air and Abobe for my $600 a year membership you have totally ruined by Friday night. If there's a human being out there at Abode please respond now

Hi,
If you have already subscribed to the membership, please follow the help document below:
https://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
Regards,
Sheena

Cannot open QB 2007 file after installing R7 upgrade

I installed the Quickbooks Pro 2007 "upgrade" and then tried to open my old Quickbooks Pro 2007 for Mac company file.
1.) It asks me if I want to Upgrade the file (no choice)
2.) Then it simultaneously says "Working" and gives me a warning about the file not being able to be renamed and that I have to rename it and save it in the QB folder.
3.) Then - whatever name I give it - it says it could not create the upgraded file.
4.) It also says that it could not open the existing file.
I'm not sure what to do - the file is only 4.7MB and I've tried every combination to get it to open.
Is there some trick? Nothing about this on the Intuit Forum. Nothing on Google either.
Help would be greatly appreciated as I cannot open my business file!

I guess what is happening is that I originally installed quickbooks and the company file on my macMini and I suspect that it is not opening it on my iMac because of a sharing violation.
I did unlock both the application and the files but they still won't open.
Any suggestions would be appreciated.

Mac Word 2008 - hyperlink message "Word cannot open the specified file"

I'm using WordMac 2008 version 12.2.5 and after following detailed instructions on how to hyperlink chapters in a Table of Contents to their respective chapters in a book, I can only get the message "Word cannot open the specified file".
Any ideas what could be wrong?
My OSX is 10.5.1.
The instructions I followed are pasted below and are copied from the Smashwords Style Guide: http://www.smashwords.com/books/view/52
START OF PASTE FROM SMASHWORDS STYLE GUIDE:
How to create a linked Table of Contents. Consider this feature in “beta.” My
thanks to Smashwords author Cheryl Anne Gardner for sharing these tips below,
which I have augmented based on my own experience adding a ToC to the Style
Guide (woo hoo!).
By adding a linked table of contents, you can help readers navigate your
document. This is especially useful for non-fiction. Most fiction doesn’t
need it. If you follow the instructions below, the ToC should work in your
EPUB, MOBI and PDF files, but it will not work in our other formats.
First, create your table of contents where you want it by typing it out. Make
sure the text is normalized just like the rest of your Smashwords’ Word
document. Example:
Contents
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Etc.
Next, we are going to create the BookMarks. In Word 2000, 2003 and 2007, the
Booksmark function is under the Insert tab. Go through your document, and at
each Chapter Start or Indexed item, you will highlight it and then select
Insert: bookmark. Name your bookmark corresponding to the Chapter/Indexed
item and then click add. It’s very important to use the first word of your
heading you’re linking to, because later on, when you add the hyperlinks,
Word displays the bookmark shortcuts in alphabetical order. With many
bookmarks, I found many of my bookmarks weren’t labeled properly, so it was
tough to link to the correct bookmark. If you want to link to a chapter named
How to Publish Ebooks, I’d recommend naming your bookmark
“HowToPublishEbooks” to make it easy to locate. If you instead name it,
“publishebooks,” you’ll frazzle your brain and make mistakes.
Repeat the process above for every Chapter Start as well as for other matter
in the book like index, bibliography, epilogue, prologue, etc. I didn’t link
to every section in the Style Guide, because otherwise the ToC would have
been three pages long. This is your call.
Next, return to your table of contents and highlight the word “Contents.”
Click insert, bookmark, and label this last bookmark “Contents”. Formatting
note: Bookmarks cannot have spaces or odd characters. If instead of
“Contents” you called the label in the document Table of Contents, as I did,
then when you insert the bookmark, name the bookmark “TableofContents,” one
word, or “toc.”
Next, add the hyperlinks to your Chapter Starts. In your table of contents,
if Chapter 1 is called Chapter 1, then highlight Chapter 1 and then click
insert Hyperlink. As you can see in the Style Guide, I tried to use more
descriptive labels. In Word’s Hyperlink menu on the left hand side, select
“Place in this document.” You will now see your bookmarks listed in the main
window. Select Chapter1 bookmark (or whatever you labeled it) and then click
ok. Do this procedure for every chapter and piece of matter in the table of
contents.
Final step. Now you can link back to the Table of contents. Move through your
document to each indexed item or Chapter start and highlight it. Then click
insert, hyperlink, and then select “Place in this document.” When the
bookmarks are showing in the main window, select the bookmark labeled
“Contents,” assuming that’s what you named your Table of Contents. Do this
for each and every chapter and or indexed item.
After you are done, all your links will be underlined. You will need to test
and make sure you linked everything properly. In most Word versions, you just
click on the hyperlink to test. In Word 2007, you may need to Ctrl-Click each
hyperlink and make sure it takes you where you need to go in the document.
Advice: Word has an automatic ToC generation feature under the reference tab.
Do not use this. It uses automated headings and formatting to generate the
ToC and this will un-normalize your text and cause font conversion issues in
your Smashwords files.
END OF PASTE FROM SMASHWORDS STYLE GUIDE.
I did all that as described but I still get the message "Word cannot open the specified file".
Could you help please?

This question would be better addressed to...
http://www.microsoft.com/mac/help.mspx
I think the operative phrase from that article is...
*Consider this feature in “beta.”*
-mj

IMAQ Create for compressed .avi - cannot open the new file afterwards with IMAQ Open

Hi there,
i hope i'm in the right board.
I recently tried to compress avi-files i collected from various cameras throughout the last years.
At first i used VDub and ffdshow with a FFVH codec - it worked fine as long as i won't try to open the compressed avi using IMAQ Open.
I googled a bit and read a lot in these forums, tried several solutions - none of them worked.
So i gave it a last, let's call it fail-proof, try:
I took the original .avi (uncompressed, openable with IMAQ Open) and used my newly gained knowledge to use LV for the compression work, i chose from IMAQ AVI Get Filter Names the ffdshow Video Codec and built a small read-write for-loop to convert the AVI frame for frame.
All worked fine despite the problem, that i still cannot open the compressed file in IMAQ Open - and i do not know why.
I would be glad to force labview to decode and open the compressed file with a certain codec, but i found no option for this.
Thanks in advance
Markus
P.S.
I'm using LabView 2010 and VAS of 02/2014.

Hello Markus,
have you had a look at this:
Writing a Compressed AVI File with the IMAQ Vision Acquisition Software
Compressing avi files-Discussion Forums
Regards,
eletra

Error 0(Native: listNetInterfaces:[3]) and error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory

Hi Gurus,
I'm trying to upgrade my test 9.2.0.8 rac to 10.1 rac. I cannot upgrade to 10.2 because of RAM limitations on my test RAC. 10.1 Clusterware software was successfully installed and the daemons are up with OCR and voting disk created. Then during the installation of RAC software at the end, root.sh needs to be run. When I run root.sh, it gave the error: while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory. I have libpthread.so.0 in /lib. I looked up on metalink and found Doc ID: 414163.1 . I unset the LD_ASSUME_KERNEL in vipca (unsetting of LD_ASSUME_KERNEL was not required in srvctl because there was no LD_ASSUME_KERNEL in srvctl). Then I tried to run vipca manually. I receive the following error: Error 0(Native: listNetInterfaces:[3]). I'm able to see xclock and xeyes. So its not a problem with x.
OS: OEL5 32 bit
oifcfg iflist
eth0 192.168.2.0
eth1 10.0.0.0
oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth1 10.1.1.0 global cluster_interconnect
eth0 192.168.2.0 global public
cat /etc/hosts
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
My questions are:
should ping on sunny1vip and sunny2vip be already working? As of now they dont work.
if you look at oifcfg getif, I initially had eth1 10.0.0.0 global cluster_interconnect,eth0 192.168.2.0 global public then I created eth1 10.1.1.0 global cluster_interconnect with setif. Should it be 10.1.1.0 or 10.0.0.0. I looked at the subnet calculator and it says for 10.1.1.1, 10.0.0.0 is the subnet. In metalink they had used 10.10.10.0 and hence I used 10.1.1.0
Any ideas on resolving this issue would be very much appreciated. I had been searching on oracle forums, google, metalink but all of them refer to DOC Id 414163.1 but it does n't seem to work. Please help. Thanks in advance.
Edited by: ayyappa on Aug 20, 2009 10:13 AM
Edited by: ayyappa on Aug 20, 2009 10:14 AM
Edited by: ayyappa on Aug 20, 2009 10:15 AM

a step forward towards resolution but i need some help from the gurus.
root# cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
root# /u01/app/oracle/product/crs/bin/oifcfg iflist
eth1 10.0.0.0
eth0 192.168.2.0
root# /u01/app/oracle/product/crs/bin/oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth0 191.168.2.0 global public
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
****ORACLE_HOME environment variable not set!
ORACLE_HOME should be set to the main directory that contain oracle products. set and export ORACLE_HOME, then re-run.
root# export ORACLE_BASE=/u01/app/oracle
root# export ORACLE_HOME=/u01/app/oracle/product/10.1.0/Db_1
root# export ORA_CRS_HOME=/u01/app/oracle/product/crs
root# export PATH=$PATH:$ORACLE_HOME/bin
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP does not exist.
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny1pub -o $ORACLE_HOME -A 192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny2pub -o $ORACLE_HOME -A 192.168.2.44/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP exists.: sunny1vip.ezhome.com/192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny2pub -a
VIP exists.: sunny2vip.ezhome.com/192.168.2.44/255.255.255.0
Once I execute the add nodeapps command as root on node 1, I was able to get vip exists for config nodeapps on node 2. The above 2 statements resulted me with same values on both nodes. After this I executed root.sh on both nodes, I did not receive any errors. It said CRS resources are already configured.
My questions to the gurus are as follows:
Should ping on vip work? It does not work now.
srvctl status nodeapps -n sunny1pub(same result for sunny2pub)
VIP is not running on node: sunny1pub
GSD is not running on node: sunny1pub
PRKO-2016 : Error in checking condition of listener on node: sunny1pub
ONS daemon is not running on node: sunny1pub
[root@sunny1pub ~]# /u01/app/oracle/product/crs/bin/crs_stat -t
Name Type Target State Host
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
Will crs_stat and srvctl status nodeapps -n sunny1pub work after I upgrade my database or should they be working now already? I just choose to install 10.1.0.3 software and after running root.sh on both nodes, I clicked ok and then the End of installation screen appeared. Under installed products, I see 9i home, 10g home, crs home. Under 10g home and crs home, I see cluster nodes(sunny1pub and sunny2pub) So it looks like the 10g software is installed.

I cannot open a eps file in CS5 Illustrator

Similar Messages

Maybe you are looking for