I cannot open HELP in Lightroom 3.6.
When I go to Lightroom HELP it will not open. I have been able to open it in the past without any problem.
I'm using Windows XP and Lightroom 3.6.
If I have changed anything I'm not aware that I did that.
Any suggestion greatly appreciated.
Geoff the kiwi wrote:
I think Victoria posted the response to a different post!!
Oooooooooops! Brain freeze!
Similar Messages
-
"Cannot open Help. The file cannot be found." Error on Treo Pro
I can see a support item listed on my phone when I try to search the Help files, but when I click on that item, it gives me an error message, "Cannot oepn Help. The file cannot be found."
I am trying to block telemarketer calls, and it looks like there is a way to do it. Two help references come up - "Setting Options for rejecting calls" and "Blocking Calls." I just can't access them.
Thanks in advance!
Shan
Post relates to: Treo Pro T850 (Sprint)From the Owners Guide http://www.palm.com/us/support/handbooks/treopro/treoproT850E_UG.pdf But I dont think its what your looking for.
Setting options for rejecting a call By default, when you reject an incoming
call, the caller is sent to voicemail. You can
change this setting so that, in addition to
sending the caller to voicemail, a text
message opens. This message contains
default text and is addressed to the caller
so that you can send the message right
away. You can also change the default text
of the message.
1 Press Start and select Settings.2 On the Personal tab, select Phone .3 Select the Advanced tab.4 To turn on the text message feature, check the Reject call with text
message box.
5 (Optional) To change the content of the message, select the text in the box and
enter the text you want.6 Press OK . -
I am using ID CS on windows XP pro. I was trying to open help but just get notepad pop-up that's full of gibberish and then IE opens and locks up. I use maxthon as my usual browser. If I have maxthon open, the ID help opens just fine. Is there a way to set maxthon as my default browser for help? This just started today. Any help would be greatly appreciated.
From the Owners Guide http://www.palm.com/us/support/handbooks/treopro/treoproT850E_UG.pdf But I dont think its what your looking for.
Setting options for rejecting a call By default, when you reject an incoming
call, the caller is sent to voicemail. You can
change this setting so that, in addition to
sending the caller to voicemail, a text
message opens. This message contains
default text and is addressed to the caller
so that you can send the message right
away. You can also change the default text
of the message.
1 Press Start and select Settings.2 On the Personal tab, select Phone .3 Select the Advanced tab.4 To turn on the text message feature, check the Reject call with text
message box.
5 (Optional) To change the content of the message, select the text in the box and
enter the text you want.6 Press OK . -
I have been using Lightroom 5.6 for weeks. Today I went to open a catalog and I got the message "assertion failure". I have gone through Adobe's posted fix for this, the Pictures folder is linked to My Pictures folder. Still no luck, in fact Light room will not open at all. I get the name of the catalog, I tried to open earlier, across my screen and the message "assertion failure". I am running Windows 7. Does anyone know of a fix for this??
Reset your preferences file: Resetting (or 'Trashing') the Lightroom Preferences file - Lightroom Forums
-
I've upgraded from PSE 9 to PSE 13 (both German versions). I'm unable to launch the help system. No help-window opens, just a small window with the message that Adobe Help cannot be loaded because there is no internet connection (Original error text: "Die Adobe-Hilfe konnte eine URL nicht laden, weil keine Internetverbindung besteht."
I have checked the following things so far:
- Internet connection exists, e.g. the Help system on Lightroom is working
- I have deactivated the firewall, but no change
Thanks for any help.Thank you Barbara for the quick reply. I checked the link you mentioned but couldn't find any issue. Product activation and updating is working fine, but not changing the situation.
The access to all help files is still blocked.
Best regards,
Daniel M. -
Cannot open catalog in Lightroom
I just subscribed to Creative Cloud and downloaded Lightroom (as a replacement for Aperture). I started with the video tutorial "How to manage your digital photos". However, I cannot get Lightroom to work at all. It downloaded OK but when I opened it for the first time, I didn't get any popup asking me what country I was in. Instead, I received an error message:
An error occurred when attempting to change modules.
I can see that it has created a Lightroom folder in Pictures with two files - Lightroom 5 Previews and Lightroom 5.lrcat. I thought these may be corrupt for some reason so I created a new catalog Lightroom 5. Again same error message but I can see a folder 'Lightroom 5' containing two files Lightroom 5 Previews and Lightroom 5.lrcat.
I tried opening Preferences to see if there was anything in there that may help fix the issue but Preferences won't open.
I'm running a Mac with OSX Yosemite and 8GBs of memory ...Hi Geoff,
I looked again, but do not see:
HD/Users/[your username]/Library/Preferences/
Like I mentioned, I have:
HD/Users/[your username]/Shared/Library/Preferences/
and
But if I try to create a folder called Library in the path mentioned in Victoria's article, it tells me that it already exists...
Also, I've searched for the file com.adobe.Lightroom3.plist and cannot find it. I did find the file com.adobe.Lightroom5.plist, removed it but still get the same error...
Thanks for the support,
HPH -
ITunes cannot open HELP NEEDED!
Everytime I try and open it, it will say that it has encountered a problem and needs to close. I have used Windows Install Clean-up b/c it gets an error when uninstalling normally, deleted the two quicktime files in system32, manually deleted both the iTunes and Quicktime folders. But even after re-installing, it still gets the error. HELP PLEASE!!!!
Sorry about the extremely long delay.
If there's been a history of a QT Alternative or WinAVI on the PC, let's try the following check.
First open My Computer, and go "Tools > Folder Options". Click the "View" tab.
Make sure that "Show hidden files and folders" is selected.
Make sure that "Hide filename extensions for known filetypes" is unchecked.
Click OK.
Now head into your C:\Windows\System32\ directory.
What files and folders can you see in there with "QuickTime" in the title?
(In a standard QuickTime install, the only such files in there should be QuickTime.qts and QuickTimeVR.qtx ... but a Codec Pack, QT Alternative, QT Lite or Storm Codec Install can sometimes drop a "QuickTime" folder in there containing sundry other "QuickTime" files. These can sometimes nterfere with subsequent QuickTime launches.) -
My PS CC does not open the help file.
Hi,
Can you please let me know the following:
1) Adobe Reader or Acrobat version.
2) Dropbox version.
3) Are you able to open these files from dropbox desktop client or from the web?
4) How have you placed these files in your dropbox folder? (Manually cpying the file to dropbox folder in your desktop OR upload the file to dropbox in the cloud and then file got synced automatically to dropbox in the desktop)
Thanks,
Shakti K -
I can't open the help content, already installed all the upgrades...any ideas or possible solutions?
This thread
http://discussions.apple.com/thread.jspa?messageID=11223544�
has a series of things to try. I found it by using the Search.
Regards
TD -
Cannot open CS3 from Lightroom
Lightroom will not now open the image into CS3.
Worked OK before.
Any idea's, please.>"Hi Pierre, when you said "upgrade", you mean CS3 full install or using using the upgrade CDs? If using the upgrade CDs, (unless you don't need existing CS2 to be on the drive) wouldn't you need the CS2 to be installed first before using the upgrade CDs?
Also, when you said "unregistered", does that mean running the Disk Repair utility to repair the permissions?"
I was loose with my terminlolgy - I bought a new version of CS3. Before installing it, I deactivated CS2 (or whatever the term is - this unregistered the product at Adobe). Then I used AppZapper (Mac) to delete CS2 and all it's associated files, then installed CS3.
Why didn't I buy the upgrade? I'm an educator and get the educational version - $285 is much better than $999 for PSCS3 extended!
- Pierre -
Cannot open help pages in Flex Builder 2
I have been working with FlexBuilder2 Beta 3, with no
problems.
Today I installed the release version (FB2), with a clean
workspace. After copying the source files, I can compile/deploy the
applications. One thing does not work however: the help in FB2.
Help>Help Contents will open up a new browser, and wait
forever, showing a white background.
Help>Search will index the help file, and show results,
but clicking on any result will again show the blank browser page.
The
Flex Start Page shows up correctly. I can run the 3 programs
under
Flex Samples and open the
Restaurant Finder project. However, none of the items under
How Flex Works can be opened.
I noticed that they link to some site ending with:
.../how_flex_works_2.html
embed=false
(with the first e in embed underlined).
I think this sould be: .../how_flex_works_2.html
?embed=false (or something similar).
Can someone indicate how this could be corrected? Maybe it
can be done in the FB2 installation dir?
Thanks,
RuiHi Randy,
I am using the standalone version: 2.0.143459.
Help>Dynamic Help and
Help>Search, both open OK. They have their own view to
the right of the main edit area. The search works fine, i.e. it
will find and display results in this view. It is only when I click
a result, or a dynamic help topic, that the main (internal) browser
window opens, and starts loading "something".
I have setup FB2 now such that
Help>Contents opens in an external browser, and that is
also working fine.
My problem now is that I am unable to see result-pages or
dynamic help topics. That is not working for the moment.
BTW: When this main internal webbrowser help view opens, a
progress-bar appears under the views, that shows something loading
up to about 30%, and then it freezes.
I'm considering re-installing FB2 again tomorrow, after
tonights backups have been made. Maybe a fresh install will work
better.
Thank you for your assistance.
Rui -
Hello,
My mother-in-law saved some pictures to my computer but I cannot open them in Lightroom or any other program that lets me edit them. They have a .CR2 extension and she uses a Canon 7D Mark III. Any tips? Thanks!it's a special cannon file format
http://filext.com/file-extension/CR2
you will maybe require special canon software to open them
or you can try google
http://www.fileinfo.com/extension/cr2
more hits
open cr2 on mac -
I am trying to install lightroom on a new computer and am getting error message 2203.database Cannot open database file system error 2147287037. Can anyone help me with this?
This site has some info
Error 2203 | Install | Creative Suite 4, 5, or 5.5 products or updates -
I installed Lightroom CC successfully but cannot open the program. What can I do?
Dear colleagues,
I installed Lightroom CC successfully but cannot open the program. What can I do?
Thanks for you help.Puttetorpa
The situation with Premiere Elements 8.0/8.0.1 and version earlier than it (in particular 3.0/3.0.2) is disturbing with regard to MPEG2 Activation.
Adobe document says that it no longer supports MPEG2 Activation for versions 8.0/8.0.1 and earlier and points the users of this group of products to a version later than 8.0/8.0.1, the current latest version 12.
But, I am not sure of the real answer. The doubts are cast by the findings of some who have claimed to have solved the problem using a uninstall/ccleaner/reinstall scheme when they have been met by the MPEG2 Activation issue.
But, I would ask....Do you have the latest version of QuickTime installed on your Windows 7 64 bit computer? And, are you working with version 3.0 as the 3.0.2 Update?
Is it still possible to run your Premiere Elements 3.0/3.0.2 on the prior computer on which it was installed?
Also, does your Windows 7 64 bit come with Windows XP Mode
Install and use Windows XP Mode in Windows 7
which is essentially a virtual Windows XP Professional SP3 32 bit.
As last resort, and highly experimental, but would you have time to experiment by replacing your latest version of QuickTime with the QuickTime Alternative 1.8.1 and then determining what happens with your Premiere Elements 3.0/3.0.2 Windows 7 64 bit situation? Do not bother with the MPEG Streamclip program download, just the QuickTime Alternative 1.8.1.
http://www.squared5.com/
Please review, consider, and do what you feel comfortable with. We will be watching for your progress.
Thank you.
ATR -
Cannot open Lightroom on iMac after download of OS X Yosemite
After downloading Yosemite on iMac I cannot open Lightroom files. I am getting the message "The Lightroom catalog cannot be used because the parent folder “/” does not allow files to be created within it."
Can somebody help me please.Here are some start up commands you might like to try Startup key combinations for Intel-based Macs - Apple Support
Personally I would try in Recovery mode...OS X: About OS X Recovery - Apple Support
Maybe you are looking for
-
Changing Row backgroundColor according to some condition
I am using datatable and each row in table should have different color according to a value of one of the property of row. Here it is <h:dataTable value="#{form.list}" var="item" id="table"> <h:column> <hutputText value="#{item.name}" /> </h:column>
-
My goal is to get all incoming mail in the Inbox - and all deleted mail in the Trash...All mail seems to be redundant and causes duplication and confusion.
-
Hi If I am not wrong searialization means sending the data in the same order as they were received. This can be achieved by using EOIO. If it is the case could you please tell me when will we go for BPM with serialization ?? I believe for serializati
-
ICM Connection Identifier error
I am getting a wierd transient error. Box pops up and shows Control failure in the title bar. The text of the error: Error: The connection Identifier is not valid. It is not frequent but visits almost every agent, Any suggestions?
-
Hi, I have an issue my company is into paints they sell same item in various sizes , say 1,5 , and 20 liter how do i create the material for the same in sale order if I enter 20 liters of 25 drums it should pick up 500 liters please suggest.