I cannot open Itunes on my computer

I used Itunes earlier in the day but it refuses to open 6 hours later. What can be the problem?

Do you get an error message when you try to launch iTunes? If so, what does it say? (Precise text, please.)

Similar Messages

  • I was doing an update and recieved an error message that Itunes did not reinstall properly and now I cannot open iTunes on my computer

    I was doing an update to my iTunes and it did not reinstall properly.  Now I cannot open iTunes at all on my laptop.  What are the fixes?

    You need to follow the instructions of tt2 in https://discussions.apple.com/thread/5822086

  • I cannot open itunes on my computer i have re installed and get msvcr80.dill error

    i cannot open itunes iget a error msvcr 80.dill after reinstalling itunes and cannot sync i phone or i pad

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • I cannot open itunes on my computer. i have tried everything!!! any suggestions???

    i have literally tried everything, anyone else have this issue?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • I get an error message saying "The iTunes Library.itl file cannot be found or created" when I try to open iTunes on my computer and the program fails to open.   How can I fix this?

    When I try ot open iTunes on my computer I get an error message stating "The iTunes Library.itl file cannot be found or created" and the program fails to open.  How can I fix this issue?

    Hi pgarard1,
    If you are having issues with launching iTunes after an update, you may want to take a look at the troubleshooting in the following article:
    iTunes for Windows: Doesn't open after upgrading in Windows Vista or Windows 7
    http://support.apple.com/kb/TS2363
    Regards,
    - Brenden

  • I cannot open itunes on windows.  It keeps saying short cut has changed or moved no longer working properly.  I have tried everything.  can someone please help.  I have a older version of windows running.  I cannot even do a repair on my computer

    I cannot open itunes on my windows (older verson of windows) It keeps saying short cut has change or moved and no longer working properly.  I have tried to do a repair on the file but the computer wont let me.   I have tried reinstalling itunes but still not working.  Is there anything you can sugguest please as I need my itunes.I have looked through the support questions and have tried everything.  I have on Bonjour on my computer.  Thanks heaps.

    See  Troubleshooting issues with iTunes for Windows updates for a complete set of iTunes rebuild steps.
    tt2

  • HT1222 I tried to download Itunes update 11.1.4 to my windows xp desktop computer. Somehow, It was not succesful. Now , I cannot open Itunes. It gives error message of R6034-runtime error. How can I resolve it?

    Hi,
    I tried to download Itunes update 11.1.4 to my windows xp desktop computer. Somehow, It was not succesful. Now , I cannot open Itunes. It gives error message of R6034-runtime error. How can I resolve it?

    Click here and follow the instructions.
    (99025)

  • HT1459 cannot download itunes to my computer have received error message that cannot download and open itunes because the support piece did not download....please help

    Question:  I cannot successfully download itunes to my computer I have tried several times and every time after the download it says that I was unable to get the support piece and therefore cannot open itunes......please help.

    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • I downloaded the latest version of itunes.  Now I cannot open iTunes.  I receive this error message: The procedure entry point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVfoundationCF.dll.  Thoughts?

    I downloaded the latest version of iTunes on my PC.  Now I cannot open iTunes.  I receive the following error message: "The procedure entry point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVfoundationCF.dll"  After pressing the "OK" button I receive a second error message: 'iTunes not installed correctly.  Please reinstall iTunes.  Error 7 (Windows error 127)".  I've uninstalled iTunes and reinstalled to no avail.  I've also eliminated the temp files (per suggestions on the trouble-shooting page) and no luck.  I also tried system restore and that did not fix the problem.  Any thougths on a repair?   

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more.  Itunes starts but before anything loads a

  • I cannot install iTunes on my computer, Winows 7. Error code -45075

    I cannot install iTunes on my computer. Error code -45075

    I used to have the same problem, and found a solution. It is very simple, ,just follow these steps below
    Open the 'computer' file, found on start or might be on your desktop.
    Click the C: drive, found on the left where theres a list of things such as favorites, desktop, etc
    Locate 'Users' and open it.
    Click your username
    Go to AppData. (if its not there: on top, where theres 'File | Home | Share | View', click view, and then on the Show/Hide column, place a check by Hidden Items)
    Click 'Local'
    Locate Temp, and click it.
    Highlight all the files and delete them. There might be some that you cant delete, but thats fine, just click 'skip'
    Restart your computer, and it will be fixed!
    Hope I helped

  • Recently I updated my iTunes account, but there was an error during installation.  Now I cannot open iTunes as an error message appears.  If I delete iTunes from my laptop then reinstall, will I still have access to all my music etc?

    The reason why I ask, is because I have another laptop which I then installed iTunes on (this was to overcome the issue of the error message and reduce the risk of losing my music etc. on my first laptop).  I cannot see any of my music on the second laptop, even when I attach my iPod.  I authorised the second laptop to link but as I cannot open iTunes on my first laptop, I cannot access my music.  I'm assuming  iTunes accounts are only stored on individual laptops/PCs and cannot be accessed remotely??  Or am I doing something wrong?  I'm not sure what I can do.

    Your iTunes library, media, playlists, and iOS device backups are safe. Please visitTroubleshooting issues with iTunes for Windows updates for details. The steps in the second box should get iTunes back on track.
    I don't make any use of the homesharing feature so I can't really comment on it, but if you want to change which computer you use to manage your devices see this migrate iTunes library post.
    tt2

  • I cannot open iTunes on my MAC.

    I cannot open iTunes on my MAC.  I receive error code -45054.  I have updated to 11.1.3, checked for software updates, deleted plist files in the library, and restarted my computer multiple times.  Still cannot access and play any of my music.  Any recommendations?

    Boot from your Snow Leopard install DVD, run Disk Utility and run Disk First Aid.
    Reboot.
    Then Apple menu > Software Update.
    Then reinstall iTunes.

  • Just installed the latest upgrade for iTunes. Cannot open iTunes store?

    Just installed the latest upgrade for iTunes. Cannot open iTunes store?

    Hey there Ray Neilson,
    It sounds like you are able to open iTunes but cannot access the store. I recommend the troubleshooting from the article named:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Troubleshoot issues in Windows
    If you haven't been able to connect to the iTunes Store for more than a day (and other customers on our discussion boards aren't experiencing similar issues) a software or Internet service provider (ISP) configuration issue may be blocking your access to the iTunes Store. Find out which ports and servers need to be allowed for iTunes Store access.
    Update iTunes to the latest version.
    If iTunes Store appears empty and only displays the message iTunes Store, follow these steps.
    Try the steps to troubleshoot iTunes Store connectivity in Windows.
    As with all firewalls not manufactured by Apple, you may need to configure Windows Firewall to allow iTunes to access the iTunes Store. Follow these steps for Windows XP, Windows Vista, and Windows 7.
    Try disabling any proxies built-in to Windows. You should avoid proxies because they can cause issues.
    If you're receiving a specific error message, follow these steps.
    If the issue still persists, contact your Internet service provider and confirm that these ports and servers are enabled over your network.
    Note: The hosts file may be blocking the iTunes Store.Microsoft's article How do I reset the hosts file back to the default? has instructions and a FixIt to have Windows try to reset the hosts defaults for you.Note: Some workplaces may put internal resources in the hosts file and may block iTunes Store. The FixIt doesn't work for Windows 8.To create a copy of your hosts file and replace it with an empty hosts file, follow the instructions below:
    You can find the hosts file at: C:\WINDOWS\SYSTEM32\DRIVERS\ETC.
    Select the hosts file. There should now be a duplicate of the hosts file named "Copy of hosts" (Windows XP) or "hosts-copy" (Windows Vista, Windows 7, or Windows 8).
    Drag the original hosts file to your desktop.
    Right-click the duplicate file and choose Open. You may be prompted to choose the program you want to use to open this file. Double-click Notepad.
    When Notepad opens, choose Edit > Select All.
    Choose Edit > Delete.
    Choose File > Save.
    Close Notepad.
    Right-click the duplicate file, and choose Rename.
    Type "hosts" (without quotation marks) and press Enter.
    Restart your computer and try connecting to the iTunes Store.
     If you still can't connect to the iTunes Store, your security software or firewall may be blocking the ability of iTunes to communicate with the Internet. Learn how to resolve security software issues.
    If the issue persists, try the troubleshooting in this article:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • I cannot open itunes on my pc. I was in the process of creating a new playlist when the program froze. My playlist and all information was lost. Can I upload my ipod my back onto itunes?

    Lost all library and playlist files. I cannot open itunes on computer. Can I upload ipod music back on my pc?

    See Empty/corrupt iTunes library after upgrade/crash.
    tt2

  • S.O.S I can't open iTunes in my computer

    I tried to open iTunes in my computer but it won't open,it says "iTunes application cannot open because another user has it open" tell the other user to quit iTunes application,I don't understand what's happening,how can I access iTunes?my computer only has two users,my husband and I,but he does not use it,I checked if the other user(my husband)had any open file,but no,so what's the problem?Somebody help me!!!Do I lost the music stored in my library?

    Try this.
    http://docs.info.apple.com/article.html?artnum=93764

Maybe you are looking for

  • Can't add friend on Game Center

    Heey, I just got an iPhone 6 plus and I'm trying to add a friend on Game Center to play games against her. Unfortunately I tried to add her through her username, e-mailaddress and iCloud-address but she did not recieve an invitation. She either tried

  • Sales Return from Customer after 180 days

    Hi, I have a requirement on sales return, if the return is done after 180 days, government does not allow to adjust the respective tax amount relating to that return goods. For example:/sales invoice: Customer Dr 110 Tax          Cr   10 Sales      

  • I'm trying to place my edge animation in dps but I can't swipe over it to take me to the next page?

    Hi, could anyone help with this? I'm using an edge animation on the Samsung Galaxy and it won't allow me to swipe over to go to the next page. Does anyone have a solution to this, or can this not be done? Please advise. Thanks

  • Problem view TIFF multipage images with ECL Viewer 5.1.3

    Dear All, using the SAPGUI 710 and CV04N, I cannot view the same TIFF multipage image twice in ECL Viewer, the second time, the first time every thing is ok, but the second time the SAPGUI display the error : "File C:Docume1dupondLOCALS1TempZEP_04578

  • Report Field Colour

    I have a report created by the wizard (Form with Report). How do I change the background or text colour of a field ?. I want to do this but only if there is data in the field. I would settle for changing the background of the whole row, if data in a