I cannot open itunes U on my ipad

I have downloaded several courses on my itunes U. It worked well until yesterday. I click on itunes u, and it opens and then closes immediately. If I double click home button I can see itunes u is running, but I simply cannot open it... if I force quite it and reopen it, it will close as well.
I don't know what is wrong with it. 

Howdy bluewinters,
Thank you for visiting Apple Support Communities.
A few more things to try for an app that is having problems.
Restart your device
Turn your device off and back on.
Check for iOS and app updates
Make sure that you're using latest version of iOS.
Open the App Store and tap Updates.
If updates are available, tap Update All.
If asked, enter your Apple ID password.
You might need a Wi-Fi connection to update some apps.
Install another app from the App Store
Try installing a different app that you don't have on your device. Find a free app from the App Store, and remember to use the same Apple ID that you used to download the app that you're having issues with.
Delete and reinstall the app
Tap and hold the app until it jiggles.
Tap the X on the app.
Press the Home button.
Go to the App Store and download the app again.
Wait for the app to download, then open it from the Home screen.
If an app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
This is one of those you can delete and reinstall.
Regards,
Nubz

Similar Messages

  • Cannot open itunes and apps on ipad after new download

    Hello - just download the new iOS 7.0 software to ipad and iphone 4s but now cannot access itunes or app store.  Can anyone advise what to do?  Thank you.

    I got a message that it was not possible and that I should delete IPhone from my computor and download a new program from Appstore. I did so but the same message appears.
    What is the exact error message you get, when you try to open iPhoto or iTunes? Please post it litarally.
    What versions of MacOS X and iPhoto are you having?
    How much free disk space is on your mac?
    Where do you keep your Media? iPhoto library, iTunes Library? On your system drive or on an external disk?

  • Cannot access itune store through ipad air. The message says "cannot open itune store".

    Cannot access itune store through ipad air. The message says "cannot open itune store".

    Cannot connect to iTune Store
    (a) Sign out and sign in again (Settings>iTunes and App Store>Apple ID)
    (b) Check Time Zone and set to automatic (Setting>General>Date and Time)

  • I cannot open iTunes and App-Store despite WLAN connection

    I cannot open iTunes and App-Store on my iPad despite WLAN connection

    Hey andywack,
    If you are unable to connect to the iTunes Store with your iPad, try these steps:
    Can't connect to the iTunes Store - Apple Support
    http://support.apple.com/en-gb/HT201400
    Regards,
    Judy

  • Unable to open ITunes stores using my IPAD & download videos

    Hi,
    I purchased IPAD in Hong Kong apple stores and i reside in India. I have changed my location to India and also provided account information and credit card details of India.
    When i try to open ITUNES stores from my IPAD it says " CANNOT CONNECT TO ITUNES STORES" and i am unable to download videos too through the stores. It says "Download error". I am keen on watching movies and TV shows by downloading it from the stores.
    This is the first time i have APPLE product and i do not have much knowledge on this product.
    Could someone please help me on this.
    Thanks,
    Naveen

    Friends,
    Any luck on this , I am not sure if there is a problem with my IPad.
    Thanks,
    Naveen

  • How do I fix itunes error 45054.  I cannot open itunes.  Also saw message not enough access priviledges.  How do I fix this problem?

    How do I fix itunes error 45054.  I cannot open itunes.  Also saw message not enough access priviledges.  How do I fix this problem?

    Try here:
    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

  • Whenever I select iTunes It shows that it cannot open iTunes Store . What am I supposed to do for that ? Please help .

    Whenever I select iTunes It shows that it cannot open iTunes Store . What am I supposed to do for that ? Please help .

    Saw this on another post.
    Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it!   It's not happening to everyone however but they are looking into it, its really hit or miss.
    In the meantime ...........
    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • I cannot open a video in my ipad with extnsion .wlmp. Any suggestions?

    I cannot open a video in my ipad with extnsion .wlmp. Any suggestions?

    Just as we know Windows Live Movie Maker .wlmp file is not a valid video file but a movie project file from which a video file can be generated in Windows Live Movie Maker and this .wlmp project files cannot be opened and played by any media players like VLC, QuickTime, iTunes, iPod, iPad, iPhone or uploaded to YouTube, Facebook for sharing, let alone to play WLMP on Mac.
    Though we can reopen this WLMP files in Windows Live Movie Maker on a Windows PC and then save and export the .wlmp project files to WMV video format, we are still unable to play the exported WMV on Mac. For WMV is also not compatible with Mac devices. (Exception: Windows Live Movie Maker 2012 can export WLMP to MP4, in this case, we can played the exported WLMP MP4 files on Mac)
    In order to play .wlmp files on Mac QuickTime, iTunes, iPad, iPod, or edit WLMP files in iMovie, Final Cut Pro, Final Cut Express, we have no other choices but to convert WLMP to MP4, MOV, or MP3.
    The following will describe a step by step guide on how to convert WLMP to MP4, MP3 or MOV at How to Convert WLMP to MP4 to Play WLMP files on Mac, iMovie, iTunes?

  • TS3212 Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any hel

    Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any help??
    Please!
    Thanks!

    If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
    The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
    Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

  • HT1338 I cannot open itunes. When I try, a popup says I need quicktime 7.5.5 but I cannot download it. Can someone help??

    I cannot open itunes. When I try, a popup says I need quicktime 7.5.5 but I cannot download it. Can someone help??

    Quicktime 7.5.5 can be downloaded from this link.
    http://support.apple.com/downloads/#quicktime

  • I get the message 'itunes has encountered a problem and needs to close' when trying to open itunes 11.1.1.11. I have had to uninstall itunes so that I could load this version, the PC says it is correctly loaded, but I now cannot open itunes. Advice?

    I get the message 'itunes has encountered a problem and needs to close' when trying to open itunes 11.1.1.11. I had to uninstall itunes so that I could load this version as the update to version 11 kept failing. The PC says 11.1.1.11 is correctly loaded, but I now cannot open itunes. Any advice on how to get itunes working again?

    Hello there, ytnoj.
    Uninstalling and reinstalling iTunes can be a tricky endeavor and must be done in a very specific way. The following Knowledge Base article provides the step-by-step of the process:
    Removing and Reinstalling iTunes and other software components for Windows XP
    https://support.apple.com/kb/HT1925
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • My problems started with an error 50 message when trying to download bought films. After un-installing and downloading iTunes, a number of times, I still cannot open iTunes on my PC and keep getting the message "you do not have permission to open"

    I have removed all spyware, anti virus software and removed all iTunes programs - as suggested by Apple. I still cannot open iTunes on my PC because of the message "you do not have permission to open this file, folder"
    I have changed and checked all permissions to allow this but still get the same message.
    iTunes is located on my C drive and I now do not have the neccesary permissions to open it.

    Hey Chris-
    It has been some time since you posted this message and I see you haven't gotten any replies, but  I have the same issue and I was wondering if you figured out how to resolve it.  Hopefully you were able to figure it out. 

  • I cannot open iTunes.  I get a message that says "The file iTunes library.itl cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now?"  I downloaded it and it and I continue to get the same message.  How

    I cannot open iTunes.  I get a message that says "The file iTunes library.itl cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now?"
    I downloaded it and it and I continue to get the same message.
    How do I fix this?    Thanks,  Dee

    Upgrade iTunes to the latest version. It should be 10.5.3.

  • I downloaded the latest version of itunes.  Now I cannot open iTunes.  I receive this error message: The procedure entry point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVfoundationCF.dll.  Thoughts?

    I downloaded the latest version of iTunes on my PC.  Now I cannot open iTunes.  I receive the following error message: "The procedure entry point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVfoundationCF.dll"  After pressing the "OK" button I receive a second error message: 'iTunes not installed correctly.  Please reinstall iTunes.  Error 7 (Windows error 127)".  I've uninstalled iTunes and reinstalled to no avail.  I've also eliminated the temp files (per suggestions on the trouble-shooting page) and no luck.  I also tried system restore and that did not fix the problem.  Any thougths on a repair?   

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more.  Itunes starts but before anything loads a

  • I was doing an update and recieved an error message that Itunes did not reinstall properly and now I cannot open iTunes on my computer

    I was doing an update to my iTunes and it did not reinstall properly.  Now I cannot open iTunes at all on my laptop.  What are the fixes?

    You need to follow the instructions of tt2 in https://discussions.apple.com/thread/5822086

Maybe you are looking for

  • How can I use SQL TOOLKIT concurrently with Database Connectivity ?

    I have installed LabVIEW 6.1 with the Database Connectivity Toolkit and the SQL Compatibility Toolkit (e.g. _SQL folder). I am trying to make the transition from the SQL Toolkit VIs to the Database Connectivity toolkits, but for compatability with ex

  • Setup to leave requisition for outside processing in 'Incomplete' status

    We are trying to implement outside processing, and the requisitions are automatically generated, but they are all in Approved status. Is there any setup/ profile option I can set to leave the requisitions in Incomplete status? Thanks

  • How to merge tableView headers

    Hi, I have a requirement that in an htmlb tableView the herader has two sub divisions, Then the result will be like teo header rows, first with main headers and second with sub divisions. For eg: For the year 2006, there are columns for Earned amount

  • Problems transporting objects from DEV to QAS

    Hi everyone, I have a problem trying to transport objects from an environment to another (DEV to QA) in XI. The issue is that the objects that were transported can't be visualized in the namespace; I checked the server log and it shows: #2.0 #2011 04

  • Been a Mac user for quite awhile now....

    ....+(Macs are all that I know computer-wise)+ but just ran into a retrieving email problem with Gmail using Mail 4.2. What is the difference between POP & IMAP mail settings? Is one better to use than the other and why exactly? And is there a cheat