I cannot open my raw files in CS6

I bought CS6 to open my raw files from Nikon D 800 and cannot open them ...

Hi Yasinaros,
Have you installed the updates for photoshop cs6?
From within photoshop cs6 go to Help>Updates.
That should include the latest version of camera raw which is 7.3

Similar Messages

Can't open D3200 Raw files in CS6!

I just bought a nikon D3200 and cannot open the raw files in CS6. I downloaded adobe camera raw 7.1 in case - no help! Very frustrated! What to do?

From Photoshop go Help > About plugin > Camera RAW and see what the version is.
the D3200 needs 7.1
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5391
Which you can install from Help > Updates

Why I cannot open camera raw files from camera Nikon 3200 through Adobe Bridge and/or Photoshop?

Why I cannot open raw files (NEF) from camera Nikon D3200 through Adobe Bridge and/or Photoshop ?

Thanks for the tip. It worked out perfectly.
De: ssprengel [email protected]
Enviada em: terça-feira, 14 de janeiro de 2014 19:14
Para: Aecio Paes Leme
Assunto: Why I cannot open camera raw files from camera Nikon 3200 through Adobe Bridge and/or Photoshop?
Re: Why I cannot open camera raw files from camera Nikon 3200 through Adobe Bridge and/or Photoshop?
created by ssprengel <http://forums.adobe.com/people/ssprengel> in Adobe Camera Raw - View the full discussion <http://forums.adobe.com/message/6012775#6012775

Cannot open nikon raw files from my 3200 in elements 8

i cannot open nikon raw files from my 3200 in elements 8

http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
You would need PSE11 since the 3200 requires ACR version 7.1
Only PSE11 can have 7.1, so to be able to use your raw files with PSE9 you should download the free Adobe DNGconverter which can batch convert a whole folder of raw files into the Adobe raw DNG format which your PSE8 can open.
http://helpx.adobe.com/x-productkb/multi/troubleshoot-camera-raw-photoshop-photoshop.html
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5486
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5518

Cannot open any RAW files on PS CS6? what could be causing this?

This is the message i keep getting...
"Could not complete your request because Photoshop does not recognize this type of file."

Is it specific to any particular raw file?
Could you specify the Camera Name and Model?
What is the version of PS (Help>System Info)?
What is the version of Camera Raw?
Check if you are able to open different raw files in PS CS6.
~ Arpit

How do i open my RAW files in CS6?

I recently bought the Nikon D800 and cannot open/import my RAW files into cs6. So i did some research and found that you have to convert them into DNG's that are compatible. I downloaded the Adobe DNG converter and that program is also telling me that there are no found camera files that are supported...
Can anyone help?!?!

DNG Converter 7.1 RC (beta) can convert D800 files. It's available at Labs.Adobe.com which also has ACR 7.1 RC that will process D800 files in Photoshop CS6.

New mac user, unable to open camera raw files in CS6

I'd really appreciate some simple 'idiot steps' that will enable me to open camera raw files (nefs) in CS6...
you will have to assume that I am an idiot and know nothing about Macs (one of which is true, the other debateable!)
thank you

Applied this update?:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5390

I have Photoshop CS2 vsn 9.0 with the Camera Raw 3.7 update and the Digital Negative Converter. I cannot open any RAW files. Does the fact that I've opened them in Lightroom 5.0 before make a difference?

When I try to open the RAW file (CR2) from the Photoshop application or from the Bridge (even while holding down the shift key) I get a message saying it's not the right kind of file. When I try to convert using the converter, it won't recognize the files.

Which operating system are you using?
Which camera are the camera raw files from?
Did you convert the files to dng using lightroom or the standalone dng converter?
If using the standalone dng converter, which version?
In the dng converter did you try setting the Compatibility for Camera Raw 2.4 and later
(Preferences>Compatibility)
You should also be able to send the files from lightroom to cs2 without converting to dng, either by using Photo>Edit In>Photoshop or setting cs2 as an external editor in the lightroom preferences

Opening a RAW file in CS6

When I open a RAW file, it no longer opens in the RAWsettings. How do I make sure a file opens in RAW settings.

Ask in the PS/ ACR forum and provide details about your system, what RAW file and so on. Nobody can operate based on such vague and generic info.
Mylenium

Satellite L850 cannot open ARW RAW files using WMP 12

Howdy all,
I have an Satellite L850 ivybridge with windows 7 proffessional 64 bit. I am having trouble opening Sony ARW raw files in Windows media player.
I have installed the Windows codec, which it says supports the Sony A55. I have the a65 which replaced the a55.
On my old other laptop the same Windows 7 proffesional software, media play open the raw files for viewings.
Any help welcome.

Hi Bob
Please dont understand me wrong but described issue has nothing to do with Toshiba directly. I hope someone here will be able to help but I think you should contact either Microsoft support or Sony to check what they will say about that.
I dont know which external devise from Sony do you use but usually Sony offers some additional software for own products.
Very interesting article about Sony ARW files you can find HERE

PSE 9: Cannot open certain raw files in editor from Organizer. Can directly tho.

I can open my CR2 (Canon raw for 50D) files from the Elements 9 Editor.   But when I try to save, the "Save as Version Set" is grayed out even tho the photo is in the Organizer. Conversely, when I try to open a CR2 file from the Organizer, I cannot. If I drag it to the Editor window, I get message that the file is the wrong type of file - the message one would expect for an unsupported raw file format.
I've been using Elements 9 successfully since October. This is new behavior in the last week (since I returned from 3 week vacation with 3000 new photos).   I cannot pin this to any newly loaded software (don't have any) nor correlate it to any other event. Occasionally, the file will open in Camera Raw from the Organizer, but not usually, and then not again for awhile. I've repaired and compacted. I uninstalled and reinstalled to no effect. I applied the 9.0.3 update - again to no effect. I've rebooted a few times, again with no effect. I did have PSE7 installed (and have had so for 2 years), but uninstalled that, hoping (vainly) for an effect.
In the process of proofing this post, I did a bit more experimenting. I find that ALL my 20D Canon Raw files work as they should (open in Camera Raw, etc.). And, I find that all my 50D Canon Raw files taken before the trip work as they should. However, the files from ONE DAY ONLY on the trip exhibit this behavior. The only difference is the trip files all were off-loaded to a laptop, then transferred to my desktop (via ethernet, not wireless), the same as all other day's photos.   Subsequent loading directly from compact flash card to my desktop results in being able to edit the files from the Organizer just fine. I've checked permissions and all users have full permissions.
The laptop and desktop are both Windows 7 (completely current).
I don't really have any ideas. Any suggestions will be appreciated. Thanks in advance.

I think PSE6 will not be able to import/open files from Nikon D7000 as support has been added in recent ACR updates which are not available for PSE8 and below.
Please have a look at http://photoshopelementsbyadobe.blogspot.com/2011/05/how-to-use-raw-files-from-latest-dslr s.html as workaround

Open a RAW file in CS6 sent from LR4

I am running LR4 and CS6 on a PC, Windows 7 OS.
I would like to send a raw file (CR2 or .ORF) from LR using the "Edit In" mode to CS6 and have it open in ACR, or be able to open it in ACR. Is this possible, if so how?
I have tried a number of approaches, none have worked. Lightroom support told me I needed to uninstall LR and reinstall. Before that I thought I would ask the question here.
Thanks,
Allen816

Hi Allen
Simply click on your thumbnail in the Library module and then click Develop. You will then save yourself the round trip. Develop is the same as ACR.
When you click Edit In, Lightroom will render an export copy for pixel editing based upon your handling settings in the external preferences tab. Clearly you don’t want pixel editing so stay in Lightroom.

Mavericks cannot open/read RAW files

Just upgraded to new MacBook Air with Mavericks. Moved my photo library over, and cannot read any of my RAW photo files (neither Canon CR2 nor Nikon NEF).
System is up to date, including latest Digital Camera Raw Compatibility Update (5.04). Based on several posts I found, I already tried to remove the Camera Raw Update and install older versions, restarting the machine. No change.
OS (Mavericks) does not open/read the files with either Preview or Quicklook - shows a black background. Applications don't open/read them either (tried both Aperture - which says "unsupported image format" despite rebuilding the library and trying all other things - and iPhoto - which also just shows a black background image), but since Preview doesn't even work, it's clearly an OS problem.
I'm very frustrated... Most grateful for any suggestions.

btw - i also seem to be missing the "Raw.plist" file. does anyone know where it is? it used to be under "/System/Library/CoreServices/RawCamera.bundle/Contents/Resources/Raw.plist" but it's no longer there. I imagine this may be related.

Camera raw cannot open D750 raw file

I have CS6 and the 8.7.1 version of Camera Raw installed and ACR will not open a Nikon D750 RAW file. Can anyone suggest another RAW converter to use instead of the Adobe product which is not up to the task.

There is something wrong with your installation of the ACR plug-in, of Photoshop or your OS (about which we know zilch! )
Raw files from that camera open just fine in ACR 8.7.1 running under Photoshop CS6v13.0.6 and OS X 10.7.5
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Cannot open CR2 RAW files in Photoshop

To support RAW files from my new Canon Powershot G11 I downloaded to Camera RAW plug-in 5_6 dmg from adobe. I manged to be able to view the CR2 RAW files in Bridge. However when trying to open a CR2 RAW file from Bridge into Photoshop I get the following error message:
"Uanable to use Camera Raw plug-in, it is not compatible with this version of Photoshop (CS3)."
How do I overcome this problem?

Jens Erik Ebbesen wrote:
To support RAW files from my new Canon Powershot G11 I downloaded to Camera RAW plug-in 5_6 dmg from adobe. I manged to be able to view the CR2 RAW files in Bridge. However when trying to open a CR2 RAW file from Bridge into Photoshop I get the following error message:
"Uanable to use Camera Raw plug-in, it is not compatible with this version of Photoshop (CS3)."
How do I overcome this problem?
You have two options with Photoshop.
Upgrade to CS4 so you can use the latest Adobe Camera Raw plug-in, or use the DNG converter from the Downloads page above to make readable versions of your CR2 files.

I cannot open my raw files in CS6

Similar Messages

Maybe you are looking for