I cannot open the new iPhoto's with maverick any tips please / have tried by deleting and re launching twice now n
Having difficulties opening iPhoto's with maverick an ideas n
Which version of iPhoto do you have? I believe that the latest, released with mavericks, is 9.5.
Clinton
Similar Messages
-
IMAQ Create for compressed .avi - cannot open the new file afterwards with IMAQ Open
Hi there,
i hope i'm in the right board.
I recently tried to compress avi-files i collected from various cameras throughout the last years.
At first i used VDub and ffdshow with a FFVH codec - it worked fine as long as i won't try to open the compressed avi using IMAQ Open.
I googled a bit and read a lot in these forums, tried several solutions - none of them worked.
So i gave it a last, let's call it fail-proof, try:
I took the original .avi (uncompressed, openable with IMAQ Open) and used my newly gained knowledge to use LV for the compression work, i chose from IMAQ AVI Get Filter Names the ffdshow Video Codec and built a small read-write for-loop to convert the AVI frame for frame.
All worked fine despite the problem, that i still cannot open the compressed file in IMAQ Open - and i do not know why.
I would be glad to force labview to decode and open the compressed file with a certain codec, but i found no option for this.
Thanks in advance
Markus
P.S.
I'm using LabView 2010 and VAS of 02/2014.Hello Markus,
have you had a look at this:
Writing a Compressed AVI File with the IMAQ Vision Acquisition Software
Compressing avi files-Discussion Forums
Regards,
eletra -
My iPhone4s was recently replaced by apple due to grey out on wifi. when I went to sync with my laptop my iPhoto library disapeared and I was left with an empty library. I cannot find my old library on my laptop. I only get one option for a library when i open iPhoto while holding down option key. I am worried I have lost all my photos. there seems ot be no iPhoto library on my iCloud either.
Any suggestions?Syncing with an iPhone should not delete the iPhoto library on your mac. It only will upload photos to the phone (iTunes sync) or import (connecting by USB). How did you sync your phone?
TD, do you know of any way, that a sync could delete an iPhoto Library on a Mac?
You may have opened a wrong library or may be working from a different user account. Are you using the same user name and Apple ID as before?
How have you searched for iPhoto libraries? Have you searched with Spotlight?
Each iPhoto library contains a file called "Library6.iPhoto" - even if your iPhoto library should no longer be recognisable as photolibrary, this file should be found:
Type "Library6" into the "Spotlight" search field in the upper right corner of your screen, like this:
When you see a list of files, select one of them and hold down the key combination ⌥⌘ to reveal the path to the file.
If Spotlight cannot find the file in the packages, use "FindAnyFile" http://apps.tempel.org/FindAnyFile
Regards
Léonie -
I have been trying to move pictures into iphoto and am now receiving a message the say I "cannot open the application iphoto because the classic environment is no longer supported."
Launch iPhoto the the Option key held down and create a new library. See if you can import those photos into it. If you can then your current library is damaged.
If that's the case make a temporary, duplicate copy of the library and try the three fixes below in order as needed:
Fix #1
delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your Home/Library/Preferences folder.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding the the Option key. You'll also have to reset the iPhoto's various preferences.
2. delete iPhoto's cache files that are located in the Home/Library/Caches/com.apple.iPhoto folder.
Fix #2
Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select last three options.
Fix #3
Use iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your User/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File->Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory. -
i tried transferring my iphoto library from my old macbook onto my new macbook pro (via external hard drive), but when i open the new iphoto, it seems to have transferred ALL images ever used on my old macbook. so i tried to just delete all those images so i could try a different approach to transferring, but the new iphoto won't let me do anything and every time i try to delete anything it crashes (since the image amount is so high). please help!!
MacBook Pro, OS X Mountain Lion (10.8.2), iphoto '11, version 9.4.2To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then launch iPhoto. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else. -
i tried transferring my iphoto library from my old macbook onto my new macbook pro (via external hard drive), but when i open the new iphoto, it seems to have transferred ALL images ever used on my old macbook. so i tried to just delete all those images so i could try a different approach to transferring, but the new iphoto won't let me do anything and every time i try to delete anything it crashes (since the image amount is so high). please help!!
See http://support.apple.com/kb/HT1229?viewlocale=en_US - I doubt that it will solve your problem, though. You may want to post on the iPhoto forum - that's where all of the iPhoto experts hang out.
Good luck,
Clinton -
Excel cannot open the new form. The Form contains schema validation errors.
i am running the approval workflow on a document library, while trying to open Excel
file i get the error.
Excel cannot open the new form. The Form contains schema validation errors.
Detailed error:
Element '{http://schemas.microsoft.com/office/infopath/2009/WSSList/dataFields}Body' is
unexpected according to content model of parent element '{http://schemas.microsoft.com/office/infopath/2009/WSSList/dataFields}SharePointListItem_RW'.<o:p></o:p>
Expecting: {http://schemas.microsoft.com/office/infopath/2009/WSSList/dataFields}WorkflowLink,
{http://schemas.microsoft.com/office/inf....
neerajHi,
According to your description, my understanding is that when you are running approval workflow and opening the Excel file, then it will occur the error above.
For a better troubleshooting, I suggest you can try to create a new normal excel file and then run the workflow and open the file to test if it works. It will help to figure out if this is the file itself issue or the SharePoint issue.
Also, please provide some more detailed information such as screen capture, it will easier to find the root cause of the issue.
Thanks
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
I cannot open the new email icon for 10.6.8 including the latest security update. My old "Stamp" icon email won't let me in either indicating that the new OS version doesn't work. Please help. I have spend over 4 hours installing and reinstalling updates, etc. and I don't know where to go from here.....
Mac OS X v10.6: Mail.app won’t open, or "You can't use this version of Mail…" alert after installing Security Update 2012-004:
http://support.apple.com/kb/TS4424?viewlocale=en_US&locale=en_US
Fellow user Grant Bennet-Alder offers this solution:
Some users have reported this problem if the Mail Application has been moved out of the top-level /Applications folder, or duplicated in another location.
When the Security Update is done, the old version of Mail is disabled.
The solution has been to:
1) make certain Mail is in the /Applications folder
2) There is no other copy anywhere else.
3) Once steps 1 and 2 have been done, Manually download and re-apply the Security Update (2012-004) by hand.
Security Update 2012-004 (Snow Leopard)
If the Mail.app has been LOST, it can be re-installed by applying the 10.6.8 version 1.1 combo update. But this update is quite large and it is usually not necessary:
Mac OS X 10.6.8 Update Combo v1.1 -
I cannot open the new Keynote of ios7 on either my iPhone 5 or my iPad
I cannot open the new Keynote of ios7 on either my iPhone 5 or my iPad
I notice that the home page redirects to a secure (HTTPS) address. I wonder whether there is a setting blocking this? What if you go directly to a secure page -- will it load?
https://www.itvsn.com.au/include/sweb.dll/product?product=155602&category=92010&site_id=ITVSN
Your add-ons list shows AVG, ZoneAlarm, and McAfee products. Could one of them be blocking this site? See whether you can add exceptions or just disable them temporarily and test whether that helps. -
When booting up I cannot get past the light blue logo with spinning disc. I have tried it with the install disc and using different keystrokes, i.e. "shift, s, c, o, " please advise. thank you in advance.
The system on the original install dic is probably looking for the original video card.
It may be possible for someone with the right skills to make an install disc for you with the driver for your new card.
As I recall from my early days of being a Macuser, If you held down a key, (spacebar?), while starting it would open a dialog to take you through a monitor setup. -
After iPad update I can't access my notes! Crashes opening with blank page. I have tried turning on and off. I have tried the reset to original. I have tried downloading again. Now what? I have important information that I need to get....
If you have set this phone up, then there would not necessarily be a solution here until you have been verify with the provider that everything is provisioned correctly on their end. Since the 3G comes from your cellular provider, if the settings are correct on the phone, then you should work with the carrier next.
-
When I send my ical link to my better half , who sadly, still uses a windows based system- He cannot open the link back to my calendar- any help?
I've been using iCloud since it's inception as "mac.com" or whatever it was called. I've been able to Sync Outlook Exchange Calenars to my iMac, iPhone and iPad. However, I cannot get iCal (when viewed in iCloud) to display Exchange or Google Calender items.
It's odd, all other Mac versions of iCal are happy e.g. iMac, MacBook Air, iPad Air, iPhone etc. But nothing when I login to icloud.com and look at the iCal there. -
When Safari opens, the page exceeds the width of my screen. Any solutions? Have tried adjusting the font.
Click the green button in the top left corner of the window to resize it. If you can't reach the button, drag the window to the right by its title bar. You can further resize by dragging any of the edges or corners. Once you've resized the window, Safari should remember the size.
-
hi everyone for about 2 weeks now i cant seem to get any search results with the mobile myspace app on ipod touch 4g i have tried clearing cookies and cache ,resetting ipod uninstalling and reinstalling but nothing seems to work any ideas?
- Have you tried going to the developer's support website/contacting the developer?
- Try a reset. It surs many ills and nothng is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears. -
Hi! I have an x-mini headset which im having trouble pairing to my iPhone 5s with bluetooth, any tips please?
Cellular calling doesn't yet work reliably.
Make sure you've followed the instructions in this support article. Note that both iCloud and FaceTime on the Mac must be signed in to the same Apple ID; those are two separate steps. Also note that the Mac and the phone must be connected to the same Wi-Fi network. Ethernet won't work. Trying to pair the phone to the Mac as a Bluetooth device won't work either.
If cellular calling still doesn't work, sign out of FaceTime and sign back in. You may have to do the same on the phone. The email address that you use as your Apple ID must be able to receive FaceTime calls.
Maybe you are looking for
-
I would like to put special characters such as the French characters in the text of a jLabel. For example if I write this: jLabel1.setText("Yahoo"); in French, I need to concatenate a special character: jLabel1.setText("Voil" + %%special_character);
-
JDBC Batch Updates & PreparedStatement problems (Oracle 8i)
Hi, we're running into problems when trying to use JDBC Batch Updates with PreparedStatement in Oracle8i. First of all, Oracle throws a SQLException if one of the statements in the batch fails (e.g. because of a unique constraint violation). As far a
-
How to implement software in Java being able to create and print invoices?? Are there any free libraries??
-
Number assignment in Purchase Requisition
Hi, I want to use my own custom number range say, PR/2010/0001 in Purchase Requisition document. How do i configure the same in SAP IDES as in the demo client (800), already predefined number range is there. I want my new number range to take ef
-
Hi: Could anybody please help me out debugging this error , while i am deploying my model in visual composer webdynpro setting ( compiler setting). Error: WD4VCRuntimeException: No parser configuration entry for the tag Invoke I am using events in my