I cannot open various files in various folders using maverick?

How can I open various files in various folders after upgrading to Mavericks?

Now will you believe me ?

Similar Messages

  • I cannot open PDF files when I am using Firefox, how can I fix this?

    I cannot open PDF files while I am using Firefox. This is true for opening PDF pages in Firefox and outside of Firefox.

    I ran into the same problem, and here is what I have done to fix it.
    Go to Tools/Add-ons
    You might have to get the latest Adobe Acrobat Reader (Likely 10.x.....)
    On any exiting Adobe Acrobat Reader select disable (to disable the plug-in)
    If you have already gotten the latest Adobe Acrobat Reader just disable any earlier version.
    There is no official way to uninstall a plug-in so this it the workaround.
    If you do need to uninstall the plugin you need to type about:config ....about:plugins search for the article to do it.

  • Can no longer open PDF files in Safari 7 using Mavericks - help??

    I cannot open PDF files on my iMac - not sure why - I am using  Safari 7 & have downloaded Mavericks - it says I have to launch Acrobat 8 and agree to terms (or some such thing) Please help.  How do you make Reader 9 the default for opening pdf's?   Help?

    Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
    Step 1
    If Adobe Reader or Acrobat is installed, and the problem is just that you can't print or save PDF's displayed in Safari, you may be able to do so by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar should appear under the cursor. Click the printer or disk icon.
    Step 2
    There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
    Step 3
    If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
    Safari ▹ Preferences... ▹ Security
    and check the box marked
    Allow Plug-ins
    Then click
    Manage Website Settings...
    and make any required changes to the security settings for the Adobe PDF plugin.
    Step 4
    Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens by pressing command-V, then press return.
    From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
    Step 5
    The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others—I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
    Step 6
    Do as in Step 4 with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari.

  • Since installing Open Office 4.0 I cannot open .doc files on the fly, used to work before.

    I've recently upgraded to Open Office 4.0. Now cannot open .doc attachments from Thunderbird. I can download to disc and open into Open Office Writer with Power Desk or Windows Explorer in the usual way. I've checked tools/options/attachments and it's set to Open Office Writer. I think this is irrelevant, but when I had Open Office 3.0 I had Writer set as a separate program, but I am now using just the master front end.
    Works OK with .pdf or .jpg files.

    just delete the entry from the attachments windows and then try and open a doc file. The entry will be recreated using your responses.
    I am guessing the existing Writer is not the correct Writer.

  • Cannot open PDF files in my Hotmail account since this week. Hotmail says it is due to Firefox.

    Cannot open PDF files in Hotmail while using Firefox. Using Google Chrome there is no problem. I already have Adobe Reader installed on my PC.

    Hi Zwann,
    Have you looked at the [[Opening PDF files within Firefox]] Knowledge Base article? There is a lot of useful information in there. They actually list 2 different PDF plugins. I'd give both a try if you are having issues.
    Hopefully this helps!

  • Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)

    Fresh installation of Exchange Server 2013 on Windows Server 2012.
    Our first test account cannot access their email via Outlook but can access fine through OWA. The following message appears - "Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize
    your folders with your Outlook data file (.ost)" is displayed.
    If I turn off cached Exchange mode, setting the email account to not
    cache does not resolve the issue and i get a new error message - "Cannot open your default e-mail folders. The file (path\profile name).ost is not an Outlook data file (.ost). Very odd since it creates its own .ost file when you run it for the first
    time.
    I cleared the appdata local Outlook folder and I tested on a new laptop that has never connected to Outlook, same error message on any system.
    Microsoft Exchange RPC Client Access service is running.
    No warning, error or critical messages in the eventlog, it's like the healthiest server alive.
    Any help would be greatly appreciated. I haven't encountered this issue with previous versions of Exchange.

    So it looks like a lot of people are having this issue and seeing how Exchange 2013 is still new (relatively to the world) there isn't much data around to answer this. I've spend ALOT of time trying to figure this out.
    Here is the answer. :) - No I don't know all but I'm going to try to give you the most reasonable answer to this issue, in a most logical way.
    First thing I did when I was troubleshooting this issue is that I ignored Martina Miskovic's suggestion for Step4 http://technet.microsoft.com/library/jj218640(EXCHG.150)because it didn't make sense to me because I was trying to connect
    Outlook not outside the LAN but actually inside. However, Martina's suggestion does fix the issue if it's applied in the correct context.
    This is where the plot thickens (it's stew). She failed to mention that things like SSL (which I configure practically useless - anyone who ever worked in a business environment where the owner pretty much trusts anyone in the company, otherwise they don't
    work there - very good business practice in my eyes btw, can confirm that...) are some sort of fetish with Microsoft lately. Exchange 2013 was no exception.
    In exchange 2003, exchange 2007 and exchange 2010 - you could install it and then go to outlook and set it up. And when outlook manual Microsoft Exchange profile would ask you for server name, you would give it and give the name of the person who you setting
    up - as long as machine is on the domain, not much more is needed. IT JUST WORKS! :) What a concept, if the person already on premises of the business - GIVE HIM ACCESS. I guess that was too logical for Microsoft. Now if you're off premises you can use things
    like OutlookAnywhere - which I might add had their place under that scenario.
    In Exchange 2013, the world changed. Ofcourse Microsoft doesn't feel like telling it in a plain english to people - I'm sure there is an article somewhere but I didn't find it. Exchange 2013 does not support direct configuration of Outlook like all of it's
    previous versions. Did you jaw drop? Mine did when I realized it. So now when you are asked for your server name in manual outlook set up and you give it Exchange2013.yourdomain.local - it says cannot connect to it. This happens because ALL - INTERNAL AND
    EXTERNAL connection are now handled via OutlookAnywhere. You can't even disable that feature and have it function the reasonable way.
    So now the question still remains - how do you configure outlook. Well under server properties there is this nice section called Outlook anywhere. You have a chance to configure it's External and Internal address. This is another thing that should be logical
    but it didn't work that way for me. When I configured the external address different from the internal - it didn't work. So I strongly suggest you get it working with the same internal address first and then ponder how you want to make it work for the outside
    users.
    Now that you have this set up you have to go to virtual directories and configure the external and internal address there - this is actually what the Step 4 that Martina was refering to has you do.
    Both external and internal address are now the same and you think you can configure your outlook manually - think again. One of the most lovely features of Outlook Anywhere, and the reason why I had never used it in the past is that it requires a TRUSTED
    certificate.
    See so it's not that exchange 2013 requires a trusted certificate - it's that exchange 2013 lacks the feature that was there since Windows 2000 and Exchange 5.5.
    So it's time for you to install an Active Direction Certificate Authority. Refer to this wonderful article for exact steps - http://careexchange.in/how-to-install-certificate-authority-on-windows-server-2012/
    Now even after you do that - it won't work because you have to add the base private key certificate, which you can download now from your internal certsrv site, to Default Domain Policy (AND yes some people claim NEVER mess with the Default Domain Policy,
    always make an addition one... it's up to you - I don't see direct harm if you know what you want to accomplish) see this: http://technet.microsoft.com/en-us/library/cc738131%28v=ws.10%29.aspx if you want to know exact steps.
    This is the moment of ZEN! :) Do you feel the excitement? After all it is your first time. Before we get too excited lets first request and then install the certificate to actual Exchange via the gui and assign it to all the services you can (IIS, SMTP and
    there is a 3rd - I forgot, but you get the idea).
    Now go to your client machine where you have the outlook open, browse to your exchange server via https://exchang2013/ in IE and if you don't get any certificate errors - it's good. If you do run on hte client and the server: gpupdate /force This will refresh
    the policy. Don't try to manually install the certificate from Exchange's website on the client. If you wanna do something manually to it to the base certificate from the private key but if you added it to the domain policy you shouldn't have to do it.
    Basically the idea is to make sure you have CA and that CA allows you to browse to exchange and you get no cert error and you can look at the cert and see that's from a domain CA.
    NOW, you can configure your outlook. EASY grasshoppa - not the manual way. WHY? Cause the automatic way will now work. :) Let it discover that exachange and populate it all - and tell you I'm happy! :)
    Open Outlook - BOOM! It works... Was it as good for you as it was for me?
    You may ask, why can't I just configure it by manual - you CAN. It's just a nightmare. Go ahead and open the settings of the account that got auto configed... How do you like that server name? It should read something like [email protected]
    and if you go to advanced and then connection tab - you'll see Outlook Anywhere is checked as well. Look at the settings - there is the name of the server, FQDN I might add. It's there in 2 places and one has that Mtdd-something:Exchange2013.yourdomain.local.
    So what is that GUID in the server name and where does it come from. It's the identity of the user's mailbox so for every user that setting will be different but you can figure it out via the console on the Exchange server itself - if you wish.
    Also a note, if your SSL certs have any trouble - it will just act like outlook can't connect to the exchange server even though it just declines the connection cause the cert/cert authority is not trusted.
    So in short Outlook Anywhere is EVERYWHERE! And it has barely any gui or config and you just supposed to magically know that kind of generic error messages mean what... Server names are now GUIDs of the [email protected] - THAT MAKES PERFECT
    SENSE MICROSOFT! ...and you have to manage certs... and the only place where you gonna find the name of the server is inside the d*** Outlook Anywhere settings in the config tab, un it's own config button - CAN WE PUT THE CONFIG ANY FURTHER!
    Frustrating beyond reason - that should be Exchange's new slogan...
    Hope this will help people in the future and won't get delete because it's bad PR for Microsoft.
    PS
    ALSO if you want to pick a fight with me about how SSL is more secure... I don't wanna hear it - go somewhere else...

  • Dear All, today i am trying to generate a chm in Robohelp 11, by combining two topics under a single book but again and again i am facing same issue  that is "Cannot open the file: mk:@MSITStore: C:\\Users\..\Desktop\filename.chm"

    Dear All, today i am trying to generate a chm in Robohelp 11, by combining two topics under a single book but again and again i am facing same issue  that is "Cannot open the file: mk:@MSITStore: C:\\Users\..\Desktop\filename.chm"
    Amy_WongWoojinDebbieclawsonmghalpinjwarrenJochem van DietenLee Design
    Please help me in solving the same

    HI,
    Thanks for the response.
    I am really tensed for the same...
    Actually the error occurs in the following case:
    1. I am creating a Parent folder in robohelp with the name ABC..
    2. Next Under ABC i have created 2 separate folders say XYZ and EFG.
    3. Under XYZ i have created various Topics say 2 or 3.
    4. Under EFG i have created various Topics say 7 or 8.
    5. Now, i have created a TOC with name for ABC (Parent Folder.)
    6. Next i have dragged and dropped my two sub folders that i have created under ABC in Project Set up wizard that is XYZ and EFG, in order to generate the webhelp first and then the CHM file fo rthe same.
    7. Webhelp is successfully getting generated.
    8. But when i convert the Webhelp to CHM Converter, after few seconds the robohelp gets halt and it shuts up the robohelp, showing a message dialog box that the Adobe Robohelp 11 is Troubleshooting for the error, the Windows manager will get back to you..Someting like this, the .CHM file for the same gets generated on the described path, but when i click on it, it does not open and shows the error as "Cannot open file: mk:@MSITStore: C:\\Users\..\Desktop\filename.chm".
    Please  help me in sorting the above issue.
    According to me:
    I think i am Lacking in the two things:
    1. How to link all the topics with the parent folder.
    2. How to Merge the projects.
    Can you please provide me the link where i can get tutorial to create a TOC for multiple files in a same TOC and to generate a chm for them.
    Actually for single project folder i have worked successfully. But, its first time i have to create a chm with lot many sub folders in it, as like one create a book.
    Please help
    Thanks & Regards,
    dhm

  • Cannot open the file because the open options are incorrect

    I'm trying to iterate through a folder of images, open each one of them, duplicate them into another photoshop file and close the individual image. This code works great on a PC (Photoshop CS3), but when I run it on our macs (Photoshop CS3) I will receive the following error on random images. "Error: Cannot open the file because the open options are incorrect" Does anyone know how to solve this problem? I've read about possibly setting the OpenDocumentType but have not seen an example anywhere. This error will sometimes occur after loading in one image or sometimes after 20 images. Sometimes I run it on the same directory multiple times all with various points of error. Sometimes every images is loaded. Any help would be much appreciated. Sample code is below.
    i //CODE BELOW
    i //allows the user to select an folder full of images
    b var inputFolder = Folder.selectDialog("Select a folder that contains the files you want added as layers.");
    b var fileList = inputFolder.getFiles();
    b var tempRef = app.open(tempName);
    b for (var i = 0; i < fileList.length; i++)
    b {
    b var tempName = fileList[i];
    b var tempStringName = fileList[i].toString();
    i //used to check if the file in the directory does in fact contain the .png extension
    b var reducedFileName = tempStringName.substring(tempStringName.lastIndexOf("/")+1);
    b if(reducedFileName.substring((reducedFileName.length - 4),(reducedFileName.length)) != ".png" || reducedFileName.substring((reducedFileName.length - 4),(reducedFileName.length)) != ".PNG")
    b {
    i //setting reference to opened docuement PNG file
    i //This seems to be the section throwing the error. Surrounding with Try Catch revealse the Error noted above
    b var tempRef = app.open(tempName);
    i //setting a tempName variable to the PNG file name
    b var tempName = app.activeDocument.name;
    i //setting reference to the active layer in the file
    b var graphicLayer = app.activeDocument.activeLayer;
    i //setting the PNG layer name to the PNG file
    b tempRef.layers[0].name = tempName;
    i //duplicating the image onto the opened Photoshop file
    b tempRef.layers[0].duplicate(backRef);
    i //closing the original PNG file without saving
    b tempRef.close(SaveOptions.DONOTSAVECHANGES);
    b }
    b }

    It looks as if the folder contains non Photoshop files, one way around the problem would be to change
    var fileList = inputFolder.getFiles();
    To specify the file types you want to process IE:
    var fileList = inputFolder.getFiles(/\.(jpg|tif|psd|crw|cr2|nef|dcr|dc2|raw)$/i);

  • After activating "Click-to-play" plug-ins, I cannot open pdf files.

    In the latest release of Firefox, information about how to prevent plug-ins from loading automatically was in the release notes. I activated this in about:config. (Click-to-play).
    After that, I cannot open pdf files! When I click on a link all I get is an empty window. Reloading page don't help.
    What I can do, is to click on the button next to the awesome bar and set that plug-ins will always load automatically for this page. Then the pdf file loads.
    Another work around is to copy the link and paste it in IE.
    Is this a bug with "click-to-play"?

    Thanks cor-el. I have read the various bug reports and it is indeed the same. Has been known for a while...
    Anyway, I find no mention of the work-around: "Click on the button next to the awesome bar and set that plug-ins will always load automatically for this page."
    I don't know if there is a place to give that feedback.

  • Indesign cannot open "old files" CS6.

    I was supposed to do a few adjustments in a project, i have opened it before and been working in it alot.. (2 months since last time i was working with this project) When i was supposed to do some minor fixes etc on this project yesterday i cannot open the file. The project it self are only on 8900 kB. What to do???? I can open my recently "newly" made and used projects.... Ive tryed some other projects that was also old, all between 2-6 months.. And it is just randomly witch i can open and witch i "Cannot open"..
                             This is the error for CS6.
                             This is the error for CS 5.5.
    If you got some suggestions scream out! Will try it all that have worked before.. (If someone have had this same problem atleast!)
    Sincerely,
    David

    First, a tip: Try manually breaking the links to the file by moving that document you want to open to your desktop or another directory or such and then try opening them... (corrupt image previews and/or images can then be largely elminated as a potential cause)
    As @Peter mentioned, we (Markzware - link here to how that works) can likely fix this file. Interesting notes from @jongware above. Without having seen this file, our research shows there are various reasons an InDesign file can head south and corrupt or crash on you. Just like a doctor can not always say what caused the problem, there are some basic steps we all should take. For instance, OS up to date, InDesign using the latest update available, enough disk space and scartch disk space for heavy Adobe design operations. Here is a list of some of the most common issues with bad INDD documents:
    * Corrupt Font(s) (or corrupt font caches - see below)
    * Corrupt Image(s)
    * Power Failure
    * Placing images via drag-and-drop from an Internet page
    * Working on an InDesign file over a network or on a remote server
    Here is a video on how to tackle the font caches of InDesign, which is good to do once and a while anyway:
    http://www.youtube.com/watch?v=Nf5ZuiaYgus
    For checking individual font files (fonts are like mini apps really), we recommend either FontExplorer XPro or Extensis Suitcase Fusion 4, with the later perhaps the more popular of the two.
    You can contact me on [email protected] if you need assistance with us trying to recover your bad InDesign CS file further. We also have a PDF to InDesign conversion tool called PDF2DTP if you have a PDF.
    Friendly Regards,
    David Dilling of Markzware

  • Cannot open cs6 files in cc

    Hello,
    I recently subscribed to CC after completeing a project on the trial version.  However since purchasing CC I have been unable to open any of the CS6 files I had downloaded (I could open them whilst on the trial period).  Yesterday I just kept receiving the error message " Cannot open the file **** Adobe Indesign may not support the file format, a plug in that supports the file format may be missing or the file may be open in another application"    Today I cannot even click to open any of the files, they are in a faded typeset in the documnents or downloads folders.   I can open any indesign files I have created from scratch though?  So it seems it is just the files originally created in CS6 that are affected.  I am working on a macbook, if that makes any difference.
    Many Thanks for your help.

    Hi Peter,
    Thanks for  your help.  I am working on the 9.2 version Willi.
    I am unable to open the downloaded cs6 files on their own, even from the file menu, as the error message appears, but today they are no longer in faded type in the folder, and I am able to click on them and drop into a new indesign file and resave. 
    So thank you for your help.

  • SAP Management Console : Error MMC cannot open the file "C:\WINDOWS\sapmmc.

    Hi Experts,
    We are installing the xmii system on a server, it was not installed completely.
    Now we have deleted the xMII folders from Add and Remove in Control Panel.
    After deleting these folders, when we are opening SAP Management Console, it is giving one <b>Error MMC cannot open the file "C:\WINDOWS\sapmmc.msc."</b>
    Please help us to resolve this problem, we have no idea to resolve the same.
    Regards,
    Study SAP

    Hi,
    Looks like your mmc dll is corrupted, with your install and uninstall of software.
    Two Options:
    1. Upgrade the Kernel with latest Patch level, which comes with new SAPMMC.dll file
    OR
    2. Just download the SAPMMC*.sar file from service market place and extract in exe directory, since it is windows re-booting the server doesn't hurt.
    Hope this helps. points are welcome.
    -K

  • SAP Management Console : Error : MMC cannot open the file

    We are installing the xmii system on a server, it was not installed completely.
    Now we have deleted the xMII folders from Add and Remove in Control Panel.
    After deleting these folders, when we are opening SAP Management Console, it is giving one <b>Error MMC cannot open the file "C:\WINDOWS\sapmmc.msc."</b>
    Please help us to resolve this problem, we have no idea to resolve the same.
    Regards,
    Study SAP

    Hi Alin,
    Thanks for your reply, we have deleted only folders
    - SAP xMII 11.5
    - SAP xMII CMS 11.5
    - SAP xMII Security 11.5
    - Microsoft SQL Server folder
    from control panel --> add and remove folder, when we were deleting these folders, IIS services were stopped by the system. After deleting the same we faced this problem.
    Regards,
    Study SAP

  • Cannot open chm file

    Hi,
    I've found several threads on this site conserning error
    messages containing: mk:@MSITStore , but none of them seems to fit
    my situation.
    I worked in RH on a project, generated a new chm file a
    couple of times a day. No problem. Then suddently after generating
    another time I could not open the chm - not from within RH project,
    not from the folder, not when copying the (newly generated) chm to
    the desktop.
    The message is: "Cannot open the file:
    mk:@MSITStore:C:\Program Files\RoboHelp Office...\..\filename.chm"
    I've shortened it here with a couple of folders, but no it is
    not very deep. I'ts at the same level as my other projects, so
    that's not the problem.
    I can open older chm files generated from other projects as
    before, so there is nothing wrong with the help function itself.
    I've tried deleting the chm file, rebooting my pc, regenerating -
    but no result.
    I also tried the MJ's Diagnostics and the only problem found
    was:
    HTML Help 1.x Workshop Components*** HH Workshop not found or
    not installed correctly. Try reinstalling.
    But it seems like this 1.x is something very old and my
    installation has worked up until now. Do I really need to reinstall
    something and exacly what and how? Is this an RH component or MS
    component?
    Any clues are welcome.
    Thanks
    Sara

    Hi John,
    Thanks for trying to help out. It's solved now. I should have
    written the solution here right away, but I was so happy that I
    could continue with my work so I forgot about it.)
    What I did was that I looked at the single source layout and
    I thought that Optimize CHM File Size might cause a problem (a shot
    in the dark - but you have to try everthing). I deselected it and
    regenerated. Voila - it worked. Then, with trembeling hands, I
    selected it again and regenerated - it still worked. Maybe this
    change of the layout made it save again properly and restart from
    scratch. But i thought that I had tried a similar thing before when
    a made new layouts to see if they would work, and they didn't.
    So, it's solved, but I'm not really sure what was wrong and
    what solved it.
    Sara

  • HP DESKJET INK ADVANT K209a-z, extraction fialed : error message "0 cannot open output file"

    D/Sir,
    I have extracted hp deskjet int advant k209a-z driver using 7zip.
    I was getting the error "Extraction Failed: Cannot Open Output File".  
    On extract with 7-zip, I get the message: 
        0 can not open output file "<folders>/Autorun.inf" 
    I am on business laptop with Windows XP but tried with Admininstrator login as well.
    Please help me. How to extract it sucessfully?

    That type of error message may be indicative of a bad file. Did you download it on the web? If so, try again, but do not use a download manager or program to do it, those can occasionally cause problems with compressed files.
    It could be possible, also, that some sort of security program on your laptop is blocking the extraction process. If that is the case you should be able to find some error in the Windows event viewer through the control panel.
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

Maybe you are looking for