I cannot print a picture in Lr5 without a border, I have adjusted print settings to be "no border" and ticked zoom to fill on image settings but the layout margins wont go below 0.13 " leaving me with a 5.75 v 3.75 print (with border) instead of a 6 x 4
Photoshop Lightroom
What a waste of space to paste the code.
Why not ask in the iLife > iPhoto forum where your question belongs.
Similar Messages
-
How to print borderless pictures in LR5?
Yesterday I was able to do it; then something has changed and now I can not do borderless prints.
I set paper size 11x8.5in printer settings, selected "borderless US legal", checked "zoom to fill" where possible, fit but LR5 restricts paper size to 10.75x8.25. It does not allow me to reduce margins to zero.Borderless printing is a function of the printer. In order to enable it, open the page setup dialog and enable borderless printing within your printer driver.
Once enabled in the driver setup, LR will see the change and you'll be able to adjust the margins all the way to 0.
mh++ -
Epson Perfection 1200 scanner continues to function as a flatbed scanner but when I try to scan transparencies/film negs the control panels change in Image Capture but the scanner bar will not complete the overview scan & cannot travel beyond the first 2/3 centimeters. All the communications seem to recognise the scanner and the mode for the intended scan but the necessary overview scan is not completed, nothing comes up on the Image Capture scan window. If I unplug the film adaptor I can get a document scan. When I plug in the adaptor again the Image Capture details change which allows me to select the type of scan required but when the scanner attempts an overview scan it is unable to complete it.
I have had the scanner from new (12 Years) and have previously scanned slides and film with the adaptor but maybe this was before I upgraded my computer (imac 27").
Do I have to buy a new scanner? It seems so close to working correctly.
I have downloaded the Epson recommended driver (5.4) and have Epson Perfection 1200 6.6 Universal showing in the Applications List.
Any thoughts or observations would be much appreciated before I go out and spend money an new hardware.
ThanksI have same issue - have you solved this yet?
-
I'm trying to order an album and I'm getting this message:
Your book seems to have frames on one or more pages that do not contain photos. You must either change the layout of those pages or place photos in those frames before you can proceed with this book.
As far as I can see I have placed pictures on all the pages. I admit that on some pages I could have placed 3 or 4 pictures but I chose to use ony one or two. Could that be the problem?Yes -
Your book seems to have frames on one or more pages that do not contain photos. You must either change the layout of those pages or place photos in those frames before you can proceed with this book.
The error seems pretty clear - you must have a photo in evey photo frame in order to place your order - so you must either change the layout (if you only want one photo on a page then use a layout with one photo) or put photos in the spots you have not filled
LN -
My Screen quit on my ipod nano 6th gen... still syncs to my mac but the screen functions wont work... Whats up with it?
Read the PDF user manual for a possible solution: iPod Manuals and/or iPod Nano Support
Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase.
If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod. -
hi, i have an imac which i bought second hand but but the itunes store wont load up nor will me songs ect sync with the itunes on this comp? i have had no issues with this on previous laptops.... any more of this and i may move to samsung! please help!
kaylsk1 wrote:
udated and its on 10.6.8 yet still no change
Your signature in 1st post was 10.8.2.
You went backwards?
Did you reformat and reinstall when you first purchased it?
If not I HIGHLY recommend you do that before you do anything else. -
I updated my Itunes to the latest version(11.1.4) and it isn't running on my laptop. The current OS is a W7 ultimate 64bits, when i try to run it, opens a message box with the following error message: error 7 (windows error 1114) . What should I do?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I get a message "The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes." Please advise what I need to do to get around this issue - at the moment iTunes wont open up!
Hi did you ever get a solution to this problem? Having the same issue myself!
-
deleted bunch of stuff and pictures and close things not in use i have 889mb wired 1.94gb active 323mb inactive and 879mb free idk what that all means but hopefully someone can tell me. is there a program i can use and fix it or if its easy can i do it myself
macworld.com/mac-troubleshooting-what-to-do-when-your -computer-is-too-slow.
Basically... Make sure you have enough Free Hard Drive space for your Mac to Perform as expected... -
Hi, I cannot access my gmail from my iphone. The password is correct and I can access fine from my computer but the iphone keeps telling me the password is incorrect. Any ideas?
I believe Gmail has an option for Two-Step verification that may require a different password for mobile devices than for your computer.
https://support.google.com/mail/answer/2703311?hl=en -
My iPod touch shows that it is charging but it actually doesn't charge and I've tried to restore/ restart it because the only icon is the charging icon, the one with the battery icon with a bit of red fill and a small lightning icon below it. Can anybody help me and give me solutions before I go to an apple service center?
Place the iPod Touch into DFU mode. This will be similer to what the factory would do to install the iOS onto new iOS devices.
Placing it into DFU mode will allow you to "format" and install the current iOS for that device.
To place your iOS device into DFU mode.
First connect you iOS device to you computer.
Open iTunes if not already open
Now turn off your iOS device using the power swipe.
Press the home and sleep button on your iOS device for 10 seconds.
Release the sleep button but carry on holding down the home button. For another 10 seconds.
Your iOS device should now be on DFU. Click on restore and iTunes will download the lastest iOS for your device.
Hopefully that sorts it if not, you will have to go to a sevice centre or call Apple Care up and get them to collect it and repair it. (replace it) -
This relates to an earlier question I asked: I have an iPhone and can send messages to a galaxy, but the person cannot receive them; however, I can receive messages from the galaxy. I have only had an iPhone so the problem does not relate to a change in phones. Up until about 1month ago I could send to the galaxy and they could be read. Help!
Hi there nancyfrompilot mountain,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact from the Contacts app. Send a new message to the contact.
Back up and restore your iPhone as new.
-Griff W. -
I am trying to access iCloud,I have had my ipad for over a year and did not use it,but now I have my I phone5 I find I can't do a lot with them together,so looking into this more I think it may be an iCloud issue,when I try to sign in I am told my account needs a verification or something??and to go to my mail which I do but nothing there,can I sestet and start again as my ignorance of these matters at the start may be causing this,help please.
Make sure you are checking the email address you used to set up your iCloud account. Check the spam/junk folder as well as the inbox. If it isn't there, go to https://appleid.apple.com, click Manage your Apple ID, sign in, click on Name, ID and Email addresses on the left, then to the right click Resend under your Primary Email Address to resend the verification email.
-
I cannot print any Firefox page to an adobe printer, that is, to create a pdf, even if my computer has an "adobe printer" installed and the adobe plugins are updated.
However, there is no problem if I use the "pdf it!" add-on.
Also if Firefox is already exhibiting a pdf page, the command "print" crashes the browser.
My Firefox is always updated and this problem exists since mid 2012.HI, guys, thanks for your help, but I will try to be more precise.
1. When I started this thread, I meant that yes I could read pdf's in firefox. I could not print ANY firefox (html) page to my adobe printer. When I command the page to be printed to adobe, I see a small window that shows the pdf being assembled, but it stops in the middle, stays locked, and firefox has to be manually crashed so that I keep working.
If, instead of commanding a print to adobe, I use the pdfit! add-on, it creates a pdf in any directory I choose, without problems. But I think I should not depend on the pdfit! because I've always used the firefox until mid 2012 (I can't remember which release)
2. The same thing happens when Firefox is already exhibiting a pdf and I simply command File-Print. I must crash Firefox in order to keep working.
3. When, upon your suggestion, I disabled both adobe add-ons, then when I click a link to open a pdf, I don't get an open choice, just save or cancel. It's a new ball game, besides not solving the original problem.
4. By the way, the preference pdfjs.disabled in about:config is False. -
I am trying to print from my iPad to a HP 3520 printer using AirPrint. I have connected the printer to my local wireless network and it confirms it is connected. However my iPad can not find the printer on the network when it searches for it. I am using an AOL supplied router and have read reports that this can cause problems. Is this the case? How do I resolve this issue?
Hi,
That indeed can be caused by a router as Apple's AirPrint uses Bonjour to communicate with the device.
Bonjour Services relies on IP Multicasting which have to be supported by your network.
To isolate the problem, please follow the steps below to enable Wireless Direct and directly connect the iPad to your printer (which means without using the router).
Once the iPad connected to the Wireless Direct network try printing and check for any difference.
If the printer can be found via the temporary connection but not through your router that indicates lack of Multicast support or wrong configuration of your router.
In such a case be sure to contact AOL and check if the router support Multicasting, if so ensure it is enabled within your router configuration, as well ensure it have the latest firmware installed..
Shlomi
Maybe you are looking for
-
My Finder menu bar and screen is flashing. Is this a virus?
The icons (file folders, Hard Drive icon, etc) on my desktop and the Finder menu bar started flashing off and on, last night. I can use Mail, Safari, iPhoto, iTunes, etc. from the Dock, but it is a challenge to click on Airport on the menu bar to get
-
Multitenant application authentication in SharePoint Online (O365)
I am able to use OAuth2 to authenticate using the mechanism described here: http://msdn.microsoft.com/en-us/library/azure/dn645542.aspx - my intention is to allow my 3rd party WebApp to allow users to grant access to their SharePoint content via Azur
-
Hi, In Oracle, which is the type equivalent to OLE objects of Access? Thanks with anticipation. Regards
-
Photoshop cc is hanging when opening a file after I updated software a few days ago
I updated PS CC a few days ago, and now whenever I open a file to work on, it hangs and takes ages to load. The file appears but looks blurred in places then gradually loads completely and the blurring disappears, but takes at least three minutes to
-
How to delete duplicate photos
Is there a setting that will delete duplicate photos after they have been imported to iPhoto? Would like to avoid having to delete each duplicate separately.