I cannot print from my MAC using a WiFi printer and Airport. I can print with an IOS device. Any suggestions, I cannot print from my MAC using a WiFi printer and Airport. I can print with an IOS device. Any suggestions
MacBook will not recognize wireless printer. Can print from IOS devices
If you haven't already, I would recommend that you download and install the very latest OS X drivers for this printer from the manufacturer's support site.
Similar Messages
-
I have a new mac powerbook pro OS X 10.8.1 and cannot connect to my canon 6000B printer - the printer appears in the printer list but will not install and I can't find a driver on the net - does anyone know what the solution is?
dino1335 wrote:
Thanks for getting back. I need help here
1 What do you mean by System Information? Is that System Preferences?
System Information is located in Applications > Utilities. It shows lots of information about your Mac, including information about the printer queues.
dino1335 wrote:
2 When I go to System Preferences and click on the printer LBP6000/LBP6018 there is no information in that window about the URI if I click Open Print Queue there is no information other than the ID of the printer
In previous versions of OS X you did see this information via the Options & Supplies pane for the selected printer in Print & Scan. But with 10.8 this information was removed so know you need to use System Information > Printers to see information about an installed printer.
dino1335 wrote:
3 If I print a document it just goes to print (it goes through the printer but no information is printed on the paper) there is no print cue so I don't know where to find the information on the URI or what I am supposed to copy
I believe that the document does not print because the print queue has not been created correctly. The CAPT driver requires a specific queue name and if the queue name is wrong then you will not be able to print.
dino1335 wrote:
FYI I also have a MacBook Pro (old) with Leopard which I also print to the same printer on and there isn't a problem with that just with this new MacPro which has Lion installed
Not surprised to read that. Mtn Lion has caused some issues for owners of CAPT printers, especially if they upgraded to 10.8 from 10.7 or 10.6.
Since you mention the ability to print on 10.5, I just want to check that you are physically moving the USB cable connected to the LBP from the 10.5 Mac to the 10.8 Mac, rather than sharing the printer from one Mac to the other. Because if you are sharing the printer from the 10.5 to the 10.8 Mac then this can be a cause of your current issue. The CAPT driver does not work when it is being shared to other Mac's. -
We use one windows machine and two mbp's (post 2012) at home. We have a modem *** router from a non apple vendor that airport utility finds and connects with absolute ease. But doesn't stay connected. The signal drops often, what can I do?
No, not all network clients -- only the two mac portables and they run together very rarely. The windows machine is hardwired to the modem router combo, and that's always sailing smooth. The mbp that is most used is perhaps 20 feet max from the router - and in another room. But it also happens when I take in into the same room as the router. On occassion, I have noticed while using network diagnostics, that one digit in the IP number sometimes appears to go awry. I then try to set up manually - and it works for a bit but is hugely erratic.
I rigged a hand me down airport express and set up a separate network for the two macs and it ran beautifully for some weeks, but that little piece is now dead and none of the retailers in my suburb seem to have one in stock. I don't want to be forced to buy an airport extreme and here in India, there's no trustworthy online ordering option.
The man from the ISP's been here several times and I don;t think it is a modem/dsl issue because the smartphone connects and the macbook drops when both are the same distance from the router? I am truly foxed and intensely irritated! :-( -
Hi,
I have a problem,
I use to drive costumers cars, I don't have any devices to pair to my Iphone5.. but today I drive a car and my Iphone ask me if I want to pair the phone to the car, and I chose "Cancel" ..
since that..
every time I want to play a song the phone acts like if it is connected to a car or some other device, every time I try to make a call, I only can use the hands free speaker or the headphones, because if I use the normal speaker to listen with the phone next to my face, the person that I am calling can listen me, but I dont..
so what I think it happens is like.. the phone connects to the car, the car is with the client, so, now, I can't have the the device "on" to my phone recognise it, so I would be able to delete it..
how do I solve this situation.. how can I delete a device that my Iphone is programed to use it, even when bluetooth is off....Hi jonunes!
I have an article for you that I believe will help you troubleshoot this issue with your iPhone:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
My computer is not allowing me to utilize any version of Firefox, after multiple downloading attempts. I simply get a message that Firefox is not supported on this architecture, and the Firefox icon in my toolbar now has a circle on it with a line through it (Canceled). I hope that someone can explain what I need to do to be able to use Firefox once again. Thank you, TC
As you have a PPC or Power Mac the last release form Mozilla to work on PPC is Firefox 3.6.*
Firefox 3.6.23 can be found at http://www.mozilla.com/en-US/firefox/all-older.html
Since you have a PPC Mac there is this third-party option for Firefox 7.0.1 at
http://www.floodgap.com/software/tenfourfox/
As of Firefox 4.0, a '''Intel''' Mac with OSX 10.5+ is required for Firefox builds from Mozilla. http://www.mozilla.org/en-US/firefox/7.0.1/system-requirements/ -
I can listen to my music with samsung soundbar wh 550 but i cannot do that with my mac book air.
I can connect to samsung soundbar with my mac but the connection drops immediately. Please help.
MacBook Air, iOS 10.9.4Contact Samsung for help.
Barry -
I have two IPhones and one IPad all with the same Apple ID. I can call facetime between the two IPhones, but I cannot call the IPAD from either of the IPhones and when I call my IPhone from the IPad it rings my wife's IPhone after briefly calling mine.
Each device needs a separate address. Use an email address (gmail.com) on the iPad.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
Cheers, Tom -
How can i update my old 2006 iMac Intel core 2 duo running 10.6.8 to OSX Lion so that I can sync using iCloud with my newer devices? Mountain Lion is not an option for my older model and Lion is no longer available at App store.
Call Apple's online store's telesales agents: 1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775. For Lion you'll get a redemptions code via e-mail and need to DL from the Mac Apple Store (requires SL 10.6.6+).
-
I want to upgrade my old airport express to the new express. Can I just switch out the old for the new or must I delete the old network first and start from scratch with the new express?
It is not necessary to delete your old wireless networks first, but doing so may eliminate confusion. If you wish to do that, open System Preferences > Network, and select Wi-Fi from the left column. Click the Advanced... button, then select your old wireless networks and delete them with the "–" (minus) button. Make sure the "Remember networks this computer has joined" remains checked.
OK then Apply.
This prevents your Mac from searching for your previous network which will no longer exist.
A new Express creates an open wireless network that you must select before you can configure it. It appears in your Wi-Fi menu like this:
Select it. AirPort Utility will load and walk you through its configuration.
Edit: If you are really using OS X 10.5.1 as shown in your profile, the above screenshot is not applicable. Instead, select the network called "Apple network nnnnnn" and then launch AirPort Utility. -
I cannot get time machine (with airport) to back up my mac. It worked previously but not now. It is working on my macbook. the message i get is "Time Machine couldn't back up to '(airport network name)'" Any help is appreciated.
OS is important.. What OS is on Mac and what is on the working macbook?
Was the Airport setup from the Macbook? That might be why it works from there..
Does the AE show up in Mac airport utility?
Can you mount the disk in finder and copy files to it/from it??
Did you try a TM reset after mounting in Finder.. so you know it is available?
What about a network reboot.. does it work post a restart for a few minutes/hours/days??? -
I've just moved from PC to Mac, with my PC i and using Vmware Player I used to work on 2 Virtual M/C both on 2 external drives, one Windows Server 2000 as operating system and the sec. WindowsXP, is their a way to open these m/c on my mac
I am so glad to hear about your success. As you are new to the Mac environment, I will be glad to help you more.
You said: "I can't change the setup yet but i have access". I don't understand what you mean about changing the setup! Please let me know more about that.
I also recommend to use Boot Camp, which allows you to install windows on a partition of your internal hard drive. This has many benefits. First, you can restart your computer and start up in windows. This makes your Mac device a complete windows machine and you gain the most from your hardware when working in Windows. Second, if a problem occures to your Mac OS X, you can restart your machine in Windows and prevent your data from getting lost. Third, you can import the Windows installed on the boot camp partition in to the Mac OS X using VMWare Fusion and work with it as a virtual machine. In this situation, VMWare enables you to work directly with your Windows in the boot camp partition. So it does not create a file package for the virtual machine in OS X.
Regarding the data safety and reliablity, I strongly recommend using Time Machine. You can also set it up to back up your virtual machines or not. This is possible to set up in the Virtual Machine Preferences Page in VMWare Fusion, or in the Time Machine preferences page in the System Preferences app of OS X.
Please don't hesitate to ask any other question. I will be glad to help you. -
I have a brand new ipad with iOS 6.1.3 and an imac with OS 10.5.8. I cannot update my OS on this machine, but want to sync the new ipad. What can I do?
If it's an Intel Mac, you can upgrade it to Mac OS X 10.6.8.
If it's a PowerPC Mac, you need to use these instructions and/or iTunes Match to put content on the iPad.
(83068) -
i have just dowloaded the icloud control panel on my PC and i am am able to see everything that has been pushed to icloud from my ipad. However i cannot see my email. i can send from the computer using icloud, but i do not see any mail that is being received by my ipad, which is set up with my mail server. What haven't i checked lol?
turn your ipad off by holding the sleep wake button for 5 seconds and slide to turn off then turn it back on and the apps should be finished and if the apps didnt finish just redownload them
-
I have a new Mac mini- changed from Windows XP. I have a peculiar problem. I use an Acer monitorwith the Mac which works fine when the Mac is 'un-sleeped'. But, if I have shutdown the Mac the Acer does not recognisethe start up - at least it shows nothing on screen. When I have shut down - nowknowing the problem, I use an old Samsung monitor to cope with the start up -it does so fine - and then put the Mac to 'sleep', then change monitors andrestart the Mac - the Acer is now fine. I am using the same cables for theSamsung and the Acer. The Acer had no problems with my old Windows system -from sleep or shut down. I really do not think there is anything wrong with theAcer - could it be some sort of recognition problem? Please can anyone assist.Donald Picton
I posted the same question a day ago with no response. I'm using an Acer x193w. You actually don't have to switch monitors to get it to work. Just make sure you turn off the monitor after shutting down the Mac mini (actually push the power button on the monitor, not just let it go to sleep). If you turn on the monitor (push the power button on the monitor), then power up the Mac mini, the monitor is recognized. The issue didnt exist with Snow Leopard for me. It only started after I started using Lion. Hope this issue gets fixed In a future OS update.
-
I'm trying to transfer music from iTunes on an old PC (Windows Vista Home Basic) that uses an external storage device to store the files to a new PC (Windows 7 Starter) that will use that same external storage device. I am also dealing with the new iTunes 11. How can I accomplish this successfully? What folder does iTunes use to store the data in? I've tried several things. Home Sharing caused duplicates but not all songs or apps transfered. It is a large library! I've tried just setting the path in the Advanced Tab of iTunes preferences of the new computer with the external drive connected the same as the path when the external drive is connected to the old computer. This was the best solution so far but still a few artists missing and some apps. Any suggestions?
Here are typical layouts for the iTunes folders:
With iTunes 11 you might also have a Home Videos folder inside iTunes Media.
In the simplest cases you copy the entire iTunes folder from <User's Music> on the source computer to <User's Music> on the target machine, install iTunes, and it "just works"TM.
If the media folder (inside the red outline) has been split out to a separate location then you can copy the library folder (outside the red outline) as before and connect the drive holding the media so that it has exactly the same path as before. If the drive appears as D: on one system and E: on the other then the library won't be able to find the media.
The crucial file is iTunes Library.itl - this contains a record of the tracks that have been added to the library, ratings, play counts, playlists etc.
See also: Make a split library portable.
tt2 -
I have a PowerPC G4 w/OSX 10.4.11 and a HP laserjet 4 connected with a USB to parallel cable, I cannot get it to print, how do I fix it ?
This forum is for questions about Apple Remote Desktop, Apple's software for managing networked Macs. You'll be more likely to get help with this question if you ask it in the Mac OS X 10.4 forum:
https://discussions.apple.com/community/mac_os/mac_os_x_v10.4_tiger
Regards.
Maybe you are looking for
-
HOW TO display a simple line of text if the user isn't logged in and not display it if they are?!?!?
there must be a way to display a simple line of text (or a link) if the user isn't logged in (as wholesale customer), and not display it if they are?!?!? it's a basic kind of <php echo> var type of function.... there must be an equivalent in this BC
-
FCP 6 will not launch in 10.5.8.
Hi. I just replaced the primary boot drive in my PPC G5 (running 10.4.11) by cloning it to a larger drive. Tested the drive and it ran perfectly (actually faster than the old one). Upgraded my OS to Leopard and after testing it w/ the first installme
-
I'm having problems creating a simple program for an introduction to programming class.
I'm not exactly sure where this question should go so please excuse me if this is in the wrong place. At this point in the class we are learning about if/else statements. The text provided was written by a collaboration of the teachers. In the course
-
hi, i've been trying change the layout of the displaytags after export, but didn't work. For example, i have a list of some objects that i show in the displaytags, and able the export option. But, it's necessary when i click to export to pdf or excel
-
Is TorchSetup-r260 legit or malware??
What is TorchSetup-r260-n-bu-1.pkg.download? I found torch installer in my files, though I didn't intentionally download it. Can't delete-says "in use." i have Norton for Mac, always up-to-date. Latest scan turned up NO VIRUSES. Is torch legit or mal