I cannot print from windows xp to a usb printer using airport extreme v5

I just bought the new airport Extreme, loaded Bonjour on a lenovo t400 running win xp sp3. 
I can print with the printer plugged in to the computer but cannot print using the bonjour setup.   I can print from my Imac connected to the airport extreme (hard wired) and wirelessly from my macbook.
I have no issues connecting to the web through the Airport Extreme with the PC.
I have all the proper drivers installed.
the Printer in question is a lexmark P910 Series and the drivers loaded with bonjour.
Any thoughts on why I cannot print using the PC?
Thanks

Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the  AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers. 
To see if your printer is compatible, take a look at thisiFelix Unofficial AirPort Printer Compatibility link. If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also you can try this Apple Tech Support article to see if it will help: Printer troubleshooting for AirPort Base Stations and Time Capsule
Finally, check out this IBM support article to see if your printer is listed as having a Postscript or PCL3 interface. If it does, then it will most likely work with the AirPort's USB port. Printers that use the "HP LIDIL" interface must be connected to a computer directly and will not work.

Similar Messages

  • Is it possible to print from Windows 8.1 to a printer connected to the USB port on an Airport Express?

    Is it possible to print from Windows 8.1 to a printer connected to the USB port on an Airport Express?
    a) HP printer with USB port only (no ethernet port) connected to Airport Express
    b) No issue printing from Macs
    Tests
    1) Installed Bonjour 2 - does not find printer (now uninstalled)
    2) Bonjour 3 is listed in programs but no way to access
    3) Using TCPIP address (and no Bonjour) gives 'Unsupported Personality' error when printing test page
    Regards
    Richard
    p.s. why are all Windows 8.1 questios n the forum 'Locked' with no reply?

    This is possible, but not with Bonjour or any other fixes.  It is just a printer set up based on the Port name of the Airport, 10.0.1.1.
    I found the answer on YouTube, Title: Windows Printing For Apple AirPort Extreme without Bonjour Wireless wifi.

  • Printing from Windows XP - indirect connection to printer

    I'm trying to print from Windows XP/Boot Camp from my MB Pro. When I print from OSX, I use the printer sharing option and print through my roommate's Mac which is directly connected to the printer (Epson).
    In browsing the threads on this issue, I have yet to see one that addresses an indirect connection to the printer.
    Any help would be appreciated.
    (Apologies if I'm posting on the wrong section of this forum.)

    I used Bonjour for Windows available from here;
    http://www.apple.com/support/downloads/bonjourforwindows.html
    Set it up and printing is a breeze.
    Good luck.

  • Airport Extreme: Internet working when directly from modem to computer, but not when using airport extreme. i have hit the reset pin and now do not know what to do.

    Using Airport Extreme:
    - Internet working when directly from modem to computer
    - Internet NOT working when modem is connected to AE
    - Internet NOT working when modem is connected to AE and AE is connected to computer
    - I have hit the reset pin
    Now what do I do?
    (in advance - lots of love to anyone who helps out)

    What sort of Internet connection do you have and who is your Internet Service Provider?
    What is the make and model number of your modem?

  • Printing from Windows 8 to a shared printer on a Windows 7 machine

    WE have a a user that has a laser printer on A windows 7 machine that others in the office can access EXCEPT the one person on a Windows 8 machine. We have tried everything, but cannot get her to print to this printer. Says it cannot be found. What does
    Windows 8 need to see a printer on a Win 7 workstation. She does have access to network printers and her own.
    Thanks.

    We have the same kind of problem but a bit different.
    Dell Printer (used for years shared on a network) was moved to our Windows 7 machine plugged in via USB.  We only use a plain workgroup with no Domain as we also have Macs on the network.
    I have Macs using shared printer, a Windows XP using the shared printer, and even Windows 7 under Parallels on the Macs using the shared printer no problem.
    I had the lone Windows 8 laptop using the shared printer but then it just stopped working.  So I deleted it and now when I try to add it is want credentials and none work.  It will not connect to the shared printer on the Windows 7 machine.
    I have Windows 7 (which also has a couple shared drives that do work) set for No Homegroup and No Password for sharing - pretty much open as we are behind a Cisco Firewall to the outside.  No firewalls on the pcs.
    Not sure where to go from here...

  • Hp envy 4500 will not print from windows 8. Thinks it prints, but it doesn't.

    Am trying to print from my Toshiba laptop running Windows 8 to my HP Envy 4500 wirelessly. Works fine from my ipad, works fine from my desktop and laptop running Windows 7. I have uninstalled and re-installed the printer driver 5 times. Printer is recognized, has an IP addrress, and will print an internal test page. When I print to it from my Windows 8 machine, the file goes in the queue, gets a port, and then disappears as if it was printed. Nothing prints. Please help, this is SOOOOOOOOOOOOOOOOOO frustrating.
    This question was solved.
    View Solution.

    Having same problem with my Toshiba laptop windows 8.  Will not print from laptop, printer prints from ipad, and iphone.
    Deleted and reinstalled several times as well both ways with disk, and wizard.
    still unable to print from laptop, have to email everything to ipad in order to print.
    so annoying and frustrating.............

  • Hp officejet pro8500 a910 shoots out blank paper when trying to print from windows 10 installed firefox. Printer works fine from chrome and ie.

    I am beta testing windows 10. I use both a hp laptop (dv77128nr) and a desktop (home made). I use a hp officejet pro8500 a910 printer.
    When using firefox I get only blank pages while trying to print from within the browser. Only using firefox. Chrome works fine. IE works fine. If I boot to windows 7, firefox works fine. Can you help or should I report this to Microsoft?
    Thanks for your help.
    ps. Tried resetting firefox. Haven't tried a new install.

    Firefox isn't officially supported on Windows 10. For that matter, Windows 10 isn't officially supported either. This is most likely a problem between Firefox, Windows 10, and your printer's driver. Try updating your printer's driver and see if that helps. Otherwise, it might be a good idea to post this on Microsoft's forums as well.

  • Can't print from Win98se laptop to AEBS USB printer

    dear friends, i have searched hard for an answer, but couldn't a solution to my particular problem. please forgive me if this is a repeat.
    I have: imac G5 with airport card, connecting wirelessly to internet via an airport extreme base station; works great. epson stylus C86 printer is connected to the base station via usb; imac prints to it just fine.
    she has: ibm thinkpad running windows 98SE, with a hawking wireless-G pcmcia card, connecting wirelessly through the above base station; works great. BUT, can't print to the epson.
    epson driver is loaded on both imac and thinkpad. what do i need to do in windows 98SE to get the thinkpad to print through the wireless connection? any wisdom would be appreciated.

    Ifelix,
    IT WORKED!!!!!!!!!!! omigod!!!!!!!!
    thank you thank you for your reply. i knew there had to be a way, but nothing that an amateur like me could figure out. i actually looked at other ifelix hints, but couldn't find anything on topic. i am very grateful. i hope others who are trying to do the same thing as i am get some relief. best wishes!

  • Cant print from Win XP and Win 7 machines using Airport Express

    I have two airport expresses each hooked to a printer. Both are ini ethernet mode only; wireless is turned off. With our two Macbooks, all works perfectly; it was foolproof to set-up and both macbooks can priunt to either printer at will.
    We have a Win 7 laptop; oddly, it will only print to one of the two printers
    We have a Win XP desktop, it wont print to either printer.
    In boht cases on the windows machines, I can see the airport expresses and I can configure3 them using the utilty. I can install the printers using the Bonjour Printer Wizard. Bonjour itself is running on each machine....I can tell as itunes home sharing works perfectly and I can see it as a "Service".
    But when I try to print a document, it just never comes out!
    I have Geek Squad coming next week....by nice if I could fix it before they get here!

    Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the  AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers. 
    To see if your printer is compatible, take a look at thisiFelix Unofficial AirPort Printer Compatibility link. If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
    Also you can try this Apple Tech Support article to see if it will help: Printer troubleshooting for AirPort Base Stations and Time Capsule
    Finally, check out this IBM support article to see if your printer is listed as having a Postscript or PCL3 interface. If it does, then it will most likely work with the AirPort's USB port. Printers that use the "HP LIDIL" interface must be connected to a computer directly and will not work.

  • How do I print from my iPad to a USB printer on my time capsule?

    I have a Mac mini, iPad 2, iPad 3rd gen, 2 iPhone 5's, and a 2TB time capsule. All running the latest versions of their respective OS's. The hp printer I got at apple is plugged into the USB port on the time capsule because I couldn't figure out how to connect it wirelessly to the time capsule. Used to have it hooked up wirelessly to my uverse router but we moved and couldn't take uverse with us. The Mac mini prints to it fine but all other devices do not see the printer. Help!

    Unless it's AirPrint compatible printer - you can't I'm afraid.
    Time capsule doesn't contain drivers for printer - it only passes data between client and printer, which is why you require drivers on your mac. iOS doesn't have printing drivers for each individual printers pass AirPrint (which is in a way driverless printing)
    There are 3rd party tools you can use to share that printer (after it is installed on your Mac) to share out as AirPrint.
    for instance:
    http://netputing.com/handyprint/

  • Can't print on an HP PSC750 using direct USB nor using AirPort Extreme

    Need help to troubleshoot inability to print using a direct USB connection to a HP PSC750 printer. The PSC750 driver does not appear in the setup dialog. Selecting Other Printers and configuring a Manual setup asks for a static IP, the printer is a USB device. Haven't been able to find a driver yet. Any ideas?

    Use the process outlined here:
    HP Printers (and others) not on compatibility list and Airport Extreme Printing
    http://tech.ifelix.net/1300.html
    Using the HPIJS drivers.

  • Cannot create bootcamp, cannot boot from Windows DVD or Bootcamp USB.

    2011 Mac Mini, running 10.9 Attempting to create a bootcamp installation. Note that I have done this many times with other Macs, including similar Mac Minis.
    I get through the Bootcamp assistant process of downloading windows support files and creating a USB drive for the install, I partition the internal 500gig hard drive in half. On reboot all I get is a black screen. Not a Black screen with flashing cursor, no error of any kind, just completely black, I have waited for over 45 minutes and it never changes. I have repeated this process several times, letting bootcamp assistant remove the partition in between, with several versions of the .iso file. I have recreated it from an original Windows 7 Pro 64bit. I have downloaded an iso of the same from Microsoft. None give any different results. I have reset the PRAM. I have a external Apple superdrive and have booted up to startup disk manager and can see that the USB is a valid boot, the Windows DVD is valid and there is an option for EFI Boot. None work, all give the exact same black screen with nothing. When booting from the Windows DVD, you can hear it spin up and read for a short while, then is stops. I have read and tried all the related posts here and on any web site I can find, although there are few and most just point back to the same articles here.
    Help, tis is driving me crazy! I know it can be done, but there is something at work here I can't figure out.

    You need to use a USB2 flash drive for BC Drivers/Windows ISO, not a USB3 stick. Windows installers do not support USB3 out-of-the-box. On Macs, BC drivers will later add support for USB3.

  • Can't print from Windows Explorer

    After installing the "HP Officejet Pro 8600 e-All-in-One Printer - N911a", on a Windows 7 64-bit PC, that is Ethernet connected, I get the following error message:
    Script Error
    An error has occurred in the script on this page.
    Line: 2061
    Char: 1
    Error: Invalid procedure call or argument
    Code: 0
    URL: res://ieframe.dll/preview.js
    When I try to print from Windows Explorer; however, I can print from other applications such as Word and Quicken OK, and I can print from Explorer OK from a Windows XP PC. Anyone have any suggestions?

    The issue is caused when Windows creates the printer profile in the control panel that it doesn't correctly create it with the drivers.
    We're not going to completely uninstall all the HP software, instead we're going to remove the corrupt Windows printer profile and reinstall it.  Total time for this on an average computer is about 5-10 minutes to completely repair (including reboot).
    1) Navigate to Start Menu > Devices and Printers or Start Menu > Control Panel > Printers
    2) Select each printer profile for the printer with an issue, then select remove device/printer.
    3) Reboot
    4) Navigate to Start Menu > All Programs > HP > insert model # here > Add Printer (or Setup Wizard)
    5) Follow the setup prompts to reinstall the printer profile and it recreates the Windows printer.
    6) Test by printing google.com (uses very little ink when the test page comes out).
    Let me know if you have any questions or issues.
    Thanks,
    Dan
    I work for an internation tech company and personally perform thousands of computer repairs a year. I'm based out of the US working for a US company, and have been working on computers for over 13 years.
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****

  • When i try to print from Parallels Desktop to my mac printer, it cannot convert the prescript file.  what should i do?

    i use Quickbooks accounting for windows and when i bought my new mac i had to buy parallels desktop so that i could continue to use my accounting software.  it has been working since then and i dont know what happened, but now when i print something i get a message saying that states "Unable to Convert The ProScript File".
    Help Please!!!
    Niko96
    i need this fixed a.s.a.p!!!!

    I don't have Parallels; I use Fusion. And in Fusion you have the option to use the installed printer is OS X to print. I have seen printing from Windows 7 to the Mac printer result in errors and there is a chance you are having the same issue.
    If Parallels has the same facility where you can use the Mac's printer then I would suggest that you install a Windows driver for your printer in Parallels and not use the Mac printer. This should stop the conversion error you are getting.

  • Cannot print from Windows Live photo gallery

    I cannot print from Windows Live Photo Gallery.   The printer is connected and has a signal.

    This printer is an HP Photosmart Touchscreen.  I have since resolved the problem by uninstalling, and reinstalling the printer.  Not sure what the problem was, but it is now working.  Thank you for your help.

Maybe you are looking for