I cannot print .jpg files created in PS or Painter 11 on my Canon Pixma MP500 Printer?

Using SnowLeopaard on my iMac, I cannot print .jpg files created in PS or Corel Painter 11 on my Canon Pixma MP 500. No file is sent to the print que. My iMac prints well with Word, TextEdit, etc. AppleCare says the problem is with the printer even though there was no problem printing with previous Apple OSX.
Jay

Do You use the latest version of the Printer Driver?
And as You specifically mention jpg, I wonder: Are You able to print other file formats?
If all else fails You could try saving pdfs and printing from Acrobat.

Similar Messages

[SOLVED] CUPS does not list Canon PIXMA MP500 printer in Add Printer

I'm finally getting Arch up on my desktop (second time I've fooled around with Arch seriously) and it's been going smoothly so far. I've hit a roadblock when trying to get my printer (multipurpose Canon PIXMA MP500) set up with CUPS. I've followed the wiki directions on CUPS and "CUPS printer-specific problems" to get it installed. dmesg gives me information saying it's plugged in via USB, and the scanner on the printer works with sane/xsane with no additional configuration. However, CUPS isn't displaying the printer in the Add Printer dialog on the web interface after I've logged in as root; it's giving me Serial Port #1, Serial Port #1, and CUPS-PDF.
I can't find information about an MP500-specific driver, and I don't know if using the MP540 driver is what I need. I'm stumped with this; has anyone tried to install this printer before, or gotten it to work? Thanks!
Last edited by polyphanes (2011-12-06 01:50:22)

Success! I got CUPS to recognize my printer by using cups-usblp and removing usblp from the blacklist. The printer now shows in the add printer dialog on the web interface. I originally had an error "Add Printer Canon_MP500 Error (Unable to get list of printer drivers: Unknown)" when adding the printer; however, after installing the most recent cnijfilter-common from the AUR and a good reboot, I was able to add the printer and select a driver "Canon PIXMA MP500 - CUPS+Gutenprint v5.2.7", and it works!
Marking this thread as solved.

Canon Pixma MP500 Printer won't print with MacBook Pro

I just bought a brand new MacBook Pro to replace an older PowerBook G4 laptop. I have a relatively new printer - maybe one year old - a Pixma MP500 from Canon that worked fine with the old laptop. I can't seem to get it to work with the new MacBook. I can use it as a scanner no problem with the new laptop, but not as a printer. I installed the software from the original Canon CD, but when I go to "add printer" MP500 shows up in the list as a USB printer but won't add. When I try to add it I get a -9672 error. Anyone out there with any idea what to do?

Hi, I actually did tried doing exactly that (should have mentioned it in my first email) and just tried it once more for good measure, but I still get the error message when I go to add the printer. So, MP500 shows up in my printer name list, with USB as the connection type, and print using shows Canon IJ Printer, but when I go to add I get "An error occurred while trying to add the selected printer. Error: -9672". Help!

Safari 5.0 on Windows 7 will not print .jpg files

I cannot get Safari 5/Windows 7 to print .jpg files! There is no problem with .png or .gif images. These are not protected .jpgs or anything - regular, inline images in an HTML file. Is this a bug? How can I report/request this "feature"?

Simply downgrading to 5.05 will not solve the constant log out issue, the problem is in Apple shared component after the 5.1 update. Your shared component gets updated with the 5.1 update and will not downgrade if you simply uninstall safari 5.1 and replace it with safari 5.05, you'll also need to uninstall the shared compenent.
From the control panel, first uninstall safari 5.1 and then uninstall Apple shared components. Then install 5.05, this will also install older version of the Apple shared component.
WARNING: Uninstalling Apple shared component will affect iTunes and Quicktime. You may need to reinstall them as well.

Can't print jpg files sent in emails - they're autosaved as HP MediaSmart photos

when someone sends me a .jpg file in an email, it comes thru as HP MediaSmart photo, and the only options are for "play". "rotate", edit or trash. There are no options for printing or saving. And you can't right click. So I can't accept any .jpg files sent to me.

Hi , Welcome to the HP Forums! I understand that you cannot print jpg files sent in your emails. With your HP Officejet 9620, on Windows 7. I am happy to look into this issue for you! I am assuming you have the HP Officejet 8620, as I cannot seem to find a HP Officejet 9620 online. If this is not your printer, please post your printer's Product/Model Number. To find your printer's Product/Model Number follow instructions in this link. Finding Your HP Product Model Number. According to this guide, Using HP MediaSmart Software Photo Features, you should be able to print your photos by doing the following: For home printing, just select the photos you’d like to print with HP MediaSmart Photo’s drag-and-drop print option. With one easy click or touch, you can add your print-ready photos to your printing queue. To print your photos from HP MediaSmart Photo, click Print Photos on the bottom of the MediaSmart Photo window. Click the album or slideshow from which you would like to print, and then click the add photo icon for each photo you would like to print. With the Print Picture controls, you can zoom in or out on the image, and move the image left-right or up-down to change the composition.If you change your mind about printing certain photos, click and drag the photo to the trash can or click Clear All to remove all the photos from printing. I would also recommend our HP Print and Scan Doctor, if you are unable to print from other programs as well. Hope this is helpful, and thank you for posting! “Please click the Thumbs up icon below to thank me for responding.”

Cannot open jpg files in Preview? Error message "may be damaged or use a file format that preview does not recognize".

For some reason I cannot open jpg files from a co-worker who previosuly sent files without any problems. I just bought a MacBook Air with OS X Lion & Preview won't open the files. She sent the same files to another co-worker who opened without any issues? Help! Anyone have any suggestions after having the same or similar problem?

I don't have an answer as to why Preview doesn't want to cooperate, but if you only need to view the jpeg's and do nothing else to them, you can use two FREE applications that come already pre-installed on your Mac... Those are iPhoto and Safari. Just drag and drop over the application icon.
You can also find several FREE photo viewers in the APP STORE.

Cannot find jpg files in LR.

I cannot find jpg files in LR when convert them from raw in PS. Jpgs are in the appropriate folder when I use Explorer but I do not see any files when I try to import new files in LR. The jpgs used to show up automatically but I don't see any of my files when I browse using Import Photos and Video in LR.

I don't have an answer as to why Preview doesn't want to cooperate, but if you only need to view the jpeg's and do nothing else to them, you can use two FREE applications that come already pre-installed on your Mac... Those are iPhoto and Safari. Just drag and drop over the application icon.
You can also find several FREE photo viewers in the APP STORE.

.jpg files created on iphone 4S are not recognized as .jpg files when uploading them to American Heart Assoc. website?

.jpg files created on Iphone 4S are not recognized as .jpg files when uplaoding to American Heart Association fund raising webpage? .jpg's from Canon camera uploaded without any problems? The website automatically reduces the file size to <100kb.

I haven't contacted AHA about this issue. The .jpg files created on Canon SLR uploaded correctly, but the photo from iPhone which was emailed to my PC using MS IE. The .jpg was browsed to from my desktop and is submitted. It shows up in draft form then when uploading it fails saying it is not a .jpg file or .png file? I have had other issues in the past emailing iPhone pictures. They were not editable after being sent to a PC. I guess we can retake photos with a non-Apple camera.

Cannot open .jpg files; says read-only and no access

I cannot open .jpg files I've been working on, even though I saved them as .jpg. The prompt kept asking me to save the files over & over. I did for a while then said NO to close the files. Now it says access is denied. Went to properties and tried to uncheck box for read-only, but it says I don't have access to do that. How can I get my files back...these were very special photos. Please help!

No...just PSE7. Unfortunately, when I tried to cut & paste the photos from
my camera disk to my hard drive, the problem photo completely disappeared.
When I go into recent history, the shortcuts are there, but none of them
work. They say the file has been moved or changed so...I don't even know
where they are for now. Do I need to call a repairman?

Canon Pixma MP970 Printer - Need Help Installing on 10.9.3!

I have a Canon Pixma MP970 printer that I cannot get to work on my MacBook Pro running OS 10.9.3! I had no issue running it on the initial release of OS 10.9, but now it is making me pull my hair out!
I recently wiped my ssd and reinstalled OS X from the recovery partition and this is when I began encountering the issue. I went to the Canon website and there are no drivers provided because it says they are already contained in OS 10.9 (and the Canon website already detects my OS). I have plugged the printer into my MacBook Pro using a USB cable and running software update (to make sure any drivers are downloaded) and there is no download. I have tried entering the printer IP address manually and still nothing.
I am out of options unless a kind soul on these forums can light the path for me. Is it possible this printer is no longer supported after an incremental OS update?
Printer: Canon Pixma MP970
Connection: Home network, wired LAN to router (printer itself already configured for network, and was working before ssd wipe)

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.[bw]/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,[lps]*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Canon pixus / canon pixma ip100 printer

hi
I'm trying to get a Canon Pixma iP100 printer connected by usb working with my arch linux.
cups 2.0.1-1
linux 3.18.4-1
for this I created and installed the following packages from the AUR repo
cnijfilter-common
cnijfilter-ip100
and installed the printer over the cups web interface.
the printer is detected as usb://Canon/ip100%20series?serial=123456 as soon as I connect it by usb.
when I first tried to print a test page, there was an error about the missing file /usr/lib/cups/filter/pstocanonij so I copied it from the pkg folder to this location.
when I now try to print the test page, the status is changing to "Sending data to printer" and the print job disappears after a short time. But the printer isn't doing a thing.
I also tried to print over the console
lp -d Canon_iP100_series -oraw out.txt
but the only thing that happens is that the printer's status led is blinking once.
I was also able to grab the data (pdf) which is sent by cups to the printer: https://filepaste.puzzle.ch/downloads/3 … d00047-001
thanks for any help
Last edited by psunix (2015-01-29 15:41:43)

now I installed the printer with the gutenprint driver, but no change so far.
gutenprint v5.2.10
Last edited by psunix (2015-02-02 15:06:09)

Upgrade to Yosemite 10.10.1 caused my Canon Pixma ip8500 printer to stop working. Canon no longer supporting this printer. Any solutions?

Upgrade to Yosemite 10.10.1 caused my Canon Pixma ip8500 printer to stop working. Canon no longer supporting this printer. Any solutions?

Hi
try this
resolve my printer problem.
with Yosemite, Apple have upgraded CUPS to 2.0, and CUPS work different. So you need to change one think in configuration.
open terminal, and write the following commands:
sudo sh -c 'echo "Sandboxing Relaxed" >> /etc/cups/cups-files.conf'
you asked for the password for superuser
sudo launchctl stop org.cups.cupsd
after this check in print queue if the printer is ready and not in pause mode.
The printer now should work, if the printer only print in B&W you need to change the configuration in CUPS web interface.
try http://localhost:631/ ; if you receive a error telling the web interface is disabled, type in terminal services the following
cupsctl WebInterface=yes
after this try again http://localhost:631/
after this choose in the web page "Adding Printers and Classes", bellow the CUPS for Administrators title.
in the new page, choose manage printers; after this choose your printer.
in the page of printer choose from the second combobox the option "set default options";
in the option page, change the color mode from monochrome to color, and save hitting the button "set default option", you be asked for a user and password with admin privileges.
After this your print is ok.

Help getting Canon PIXMA MG2520 Printer to Print Wirelessly

I just got my Canon PIXMA MG2520 printer set up. Everything worked perfectly. I downloaded the drive and plugged it in and it worked. However, I cannot get it to print wirelessly. With my last printer there was a simple step to get the printer to do this. Something I checked or unchecked, but I can't remember what that was. Can someone help please? Thanks.

Do you have your printer setup in its setup panel to connect to your WiFi network?
When you say you plugged it in and it worked, are you saying you used a USB cable to try it?
If the printer is setup to connect to your WiFi network, you may only need to power off your router, wait a few seconds and power it back on for your printer to be seen on the network.

Image Capture does not recognize my Canon Pixma MP150 printer

Image Capture does not recognize my Canon Pixma MP150 printer since I upgraded to Mavericks.

To scan with Image Capture you need an ICA driver. Looking through the CanonDevices list in the /Library/Image Capture folder I cannot see an entry for the MP150. And I checked Canon Australia's web site and there is no ICA driver for the MP150. There is a scanner driver and MP Navigator for OS X 10.7. You may be able to install and use the driver and application on 10.9, although you will have to get past Gatekeeper to install both items as they are not digitally signed. To do this, you can hold down the Control key and click on the installer. A pop-up menu will appear and you can select Open. You will then be able to install the driver and then the application. If they do install then see if you can open MP Navigator and scan from the MP150.

Canon pixma mx850 printer not reading my computer - will not print

canon pixma mx850 printer not reading my computer - will not print
I unplugged the cord that went from the printer to the computer to another canon printer to see if I could remediate a problem with a wireless printer.
When I plugged the computer cord back into the usual computer, the printer is no longer talking to the computer even though I have gone in and changed back the settings, and it has been the default printer - that was not changed.
I've tried all the trouble-shooting suggestions to no avail.

Hi scheideckerj,
Reinstalling the latest drivers for the printer from the Canon USA website may resolve the issue you are experiencing. Please click here to go to the Drivers and Software page for the PIXMA MX850. Once on the download page, please do the following:
1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
2. Next, please click on the red arrow next to the "DRIVERS" section and click on the MP DRIVERS file. When you do, a red DOWNLOAD button will appear. Please click on the checkbox below the DOWNLOAD button, then click the red DOWNLOAD button to begin the download. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
Once the file is downloaded, please double-click on it to reinstall the printer drivers on your computer.
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I cannot print .jpg files created in PS or Painter 11 on my Canon Pixma MP500 Printer?

Similar Messages

Maybe you are looking for