I cannot print just a selection of a page, what can I do?

I have seen that other people have asked this question also, but none of the replies on the forum are satisfactory. They all say it is not a good thing what you have done with the print option. I want to print a simple recipe, maybe half a page, I go to print and cannot select the option to print just the selection. It shows 7 pages to print! What a waste of time, paper, and ink!!!
The only option people seem to have found is to copy the selection and paste it in a word document. Then you end up with a lot of junk in word that is not needed. This is also time consuming.
My old version of foxfire didn't have this problem. Please fix this issue or I will be forced to switch to another browser, which I don't want to do as foxfire still has the least crashes of any browser I have used.

Simple answer is - '''don't use the Print button when you want to print a selection'''.
# Select the text that you want to print.
# Use '''{ Ctrl + P }''' to open the "native print dialog".
# 'tick' '''Selection''' under Print Range
# Hit the Print button in that dialog box to print that "selection".

Similar Messages

  • How can I print just a select/highlighted portion of a webpage/email? FF prints EVERYTHING on each page, wasting ink.

    I switched form IE to FF. In IE, I could select text (or photos) and print just the portion of web pages and emails that I wanted, thus saving paper and ink. I have not been able to do that with FF. I have to print all of each page, so text, ads, and whatever other extraneous material prints. What a waste! Is there any way to select and print just what I need using FireFox? Currently I have to run both IE and FF to handle my printing and documentation needs. Thank you!

    Still happens with Firefox 12. I wish they'd just fix it, the way it used to be in Firefox 10, without the complicated workaround suggested above.

  • Why can't I print just a selection of an Apple Mail message?

    I have a MacBook running OS 10.5.8 (with the latest updates). My preferred browser is Firefox 15.0.1. I have always been able to print just a selection of a document, and I can do so in Microsoft Word, Google Mail, everything, it seems except Apple Mail. I have a little HP inkjet printer and a new Brother laser printer (HL-5470DW). I've searched their Help menus and manuals, as well as the Help menu for Mac and have found nothing about printing selections of Apple Mail messages. Is there a way to do that? Or do I have to copy the selection into a different document, like one in Microsoft Word for Mac? Or Google Mail? I prefer not to do that last option. The formatting choices are not the greatest.
    Any help would be greatly appreciated. Thanks.
    Jenny

    Thanks BDAqua. It seems so silly that it's so easy in other contexts, but it's good not to keep on trying something futile
    Best,
    Jenny

  • How do you print just a select amount of information?

    In Word you can print just a paragraph if you want. Can you do that in Pages?

    You know you can drag snippets to the desktop as well. No real point printing till you have to.
    I use *iText Pro '09* (there is a free version *iText Express* ) to hold any everything down to bits of web pages, download links, audio, movies etc.
    http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=47&mforum=iworktipsn trick
    It is just a Word Processor/Text Editor, like a Super TextEdit, but it is just a clean, mean, processing machine.
    Peter

  • How can I print just a part of the page and not the full page with Adobe Reader v 10.1.2?

    how can I print just a part of the page and not the full page with Adobe Reader v 10.1.2? I need to print a engineering print with lot of information but information is too small in letter size and I don't have a plotter.

    Two ways to print a portion of a page: zooming or using the Snapshot Tool.
    ZOOMING:
    Zoom into the area you want to print.
    Click the Print icon.
    Under "Pages to Print", make sure "Current view" is selected under "More options" (you may need to click "More options" to open it).
    If you aren't satisfied with the preview, try clicking "Fit" under the Size button.
    SNAPSHOT
    Choose Edit > Take A Snapshot.
    Drag a rectangle around the area you want to print. 
    Click the Print icon.
    Under "Pages to Print", make sure that "Selected Graphic" is selected under "More options".
    To enlarge the snapshot to fit the sheet of paper, choose "Fit" under the Size button.
    Hope this helps!

  • How do I print just a portion of a page.

    How do I print just a portion of a page from my I-pad? Such as a recipe.

    this is how I do it: select the portion you want to print, COPY AND PASTE TO BLANK PAGE IN an app then you will only be printing what you want

  • Printer just started feeding a blank page after some, but not all printed documents

    Printer just started feeding a blank page after some, but not all printed documents

    Hi @cam21 ,
    I understand that you are having issues printing, after some documents you are getting blank pages. I would be happy to help you.
    I would do a hard reset to see if that will resolve the issue.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation.
    What application are you printing from?
    It may be a setting in the application.
    Does this happen from all applications?
    Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. http://www.hp.com/go/tools>Using HP Diagnostic Tools for HP Printers in Windows.
    How is the printer connected? (USB/Ethernet/Wireless)
    What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
    If there is anything else I can help you with, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • I cannot print content off the usta web pages

    i cannot print content off the usta web pages; printer is hp officejet pro 8600+; operating system is windows 7-64bit

    hi there,
    could you provide the community with a little more information to help narrow troubleshooting? What browser are you using and are you getting any errors?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • I have problem with wireless print HP after iOS 7  !? What can i do

    I have problem with wireless print HP after iOS 7  !? What can i do?!  

    Tap Settings / General / Reset / Reset Network Settings if your having a problem with your network. If you have another problem go to the same place in "Reset" and just reset all settings

  • I am having difficulty opening my iPhoto on my macbook. Every time I try to access it, it freezes or the application will just not open at all. What can I do to open it successfully?

    I am having difficulty opening my iPhoto on my macbook. Every time I try to access it, it freezes or the application will just not open at all. What can I do to open it successfully?

    Select iPhoto in the Applications folder the type Command+i to bring up its Info window.  That will tell you what version it is.
    As a first fix attempt do the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
    or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
    Data/Library/Caches/com.apple.iPhoto folder
    3 - launch iPhoto and try again.
    NOTE 1: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    NOTE 2:  In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.

  • My mac has stopped connecting to the wireless printer. However both the mac and the printer indicate that they are connected. What can I do to correct this issue?

    my mac has stopped connecting to the wireless printer. However both the mac and the printer indicate that they are connected. What can I do to correct this issue?

    Maybe this???
    Mac OS X: About the Reset Printing System feature ...
    http://support.apple.com/kb/HT1341?viewlocale=en_US
    10.5/10.6/10.7/10.8 instructions...
    In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
    if you hold option and click the "-" tab it resets the printing system.
    http://www.macosxhints.com/article.php?story=20031215144430486
    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
    Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
    Resetting the printing system in Mac OS X 10.5.x+++
        1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
        2.    Choose System Preferences from the Apple menu.
        3.    Choose Print & Fax from the View menu.
        4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..." 
   
  As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
    http://support.apple.com/kb/ht1341
    Reboot.

  • My MacBook Pro just started to run very slow, what can I do to fix it?

    My MacBook Pro just started to run very slow, what can I do to fix it?

    First, back up all data immediately, as your boot drive might be failing.
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Reset the System Management Controller.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Check your keychains in Keychain Access for excessively duplicated items.
    Otherwise, take the steps below when you notice the slowdown.
    Step 1
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
    Step 2
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • My mac says it cannot type string everytime I take a screenshot, what can I do?

    My mac says it cannot type string everytime I take a screenshot, what can I do?

    So you hold down the command and Shift keys and type the 3-key?
    That is the default. Could you have re-assigned that key combination to some other function?
    Does Command-Shift-4 give you a crosshair to drag across and select a screen area to capture?

  • Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do?

    Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do?  I use this for my mobile, on-site auto repair business and not being able to call up repair and diagnostic info and reference for some cars is troublesome for sure. It works fine on the computer and I have installed a remote desktop app as a workaround but it is unreliable because the desktop is not business dedicated and may be off or in use at the time. So is there a known fix for this?
    Let me paint a more descriptive picture, visualize 4 drop down selection menus, first one is for year, next one is for make, 3rd one is model and the last one is for engine size/type. If I wanted to choose a 2012 vehicle it wont work because it is the top selection on the list. This can be forced by selecting any other year and then coming back to 2012. Ok fine, but then let's say I wanted to choose Acura as the make, well it won't take it because again it's the top selection. Again you work around it be selecting any other make and coming back to Acura. Ok now select the model, same trend follows. But now since most Acura vehicles come with dedicated engines and no optional engines I have only 1 selection in that final drop down menu and it will not take my selection and therefore never let me proceed to the info I need.
    This is also true when ordering parts from my wholesaler's website, they use drop downs and I can only get to that last drop down and then I'm stuck. This is blindingly frustrating, what options do I have. I'm not opposed to any avenue at this point.

    Did you ever figure this out? I bought my iPad last week to use in my business as well. I assume you are trying to use alldata? That is where I noticed this same issue. I had problems with identifix working with safari but downloaded a different browser and that works fine. Alldata does not work with either browser. The main difference is that on identifix if there is only one engine selection, it automatically selects the only option and continues to the home page. With alldata you have to make the selection manually even if there is only one option. Honestly if I can't get this to work I am going to return the iPad as it looses a significant amount of usefulness to men

  • HT4623 i was doing a software update downloading ios 6.1 and the phone froze half way through the download i tried to restart the phone by pressing the power button and the home button but its just a apple on the screen. what can i do to fix this??

    i was doing a software update downloading ios 6.1 and the phone froze half way through the download i tried to restart the phone by pressing the power button and the home button but its just a apple on the screen. what can i do to fix this??

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps..
    But... if the Device has been Modified... this will Not necessarily work.

Maybe you are looking for