I cannot print to a p1102w if i am on a machine connected to the same access point as the printer..

I have two p1102w printers set up in a school, any time I try to print it will only work if the laptop i'm using is connected to a different wireless access point than the printer. This happens anywhere in the school, has anyone ever encountered something like this before?
The laotops are running xp sp3 professional by the way.
Thanks in advance for your thoughts and ideas.
joray75

First thing to do is check your routing rules and tables in the network to make sure the type of communication you're wanting (printing via wireless on the same access point) is allowed. I'm betting something is off in those that's preventing communication.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Similar Messages

RV325 Router: Adding a wireless access point for wireless printer

Hi all,
I am trying to add a Linksys ea6350 wireless router to the RV 325 router with the goal of having a wireless printer on the network. I can connect wirelessly to the router and access the internet; PC's that are on the wireless router can find the printer and print. However, PCs that connected to the RV via LAN cannot. I am assuming that this has to do with how the traffic from the wireless router is handled and that basically at the moment both routers are functioning as two separate networks.
Is this something that can be remedied from the Cisco router side? Or the Linksys? Or Both?
Thank you

Hi Jow, it sounds like you have this EA router connecting through the WAN port going in to your RV router, that would make the most sense because it would NAT your connection, allowing you to wirelessly connect but your LAN connection to the RV325 not working.
If you want to fix this, move your connect from the EA router on to a "LAN port", disable the DHCP server then make sure it is on the same IP subnet as the RV325 and just let it broadcast the wireless signal. The EA router LAN ports are normal switch port so it will work ok.

How can I save to the same map every time when printing pdfs?

How can I save to the same map every time when printing pdfs?
Finder points to the document map even when I chose a different map recently.
I often print series of pdfs from the print dialog box, I'd like to choose the map to save to and then have all subsequent pdf prints automatically directed to the same map until I decide otherwise.

that link seems to be broken right now:
403 Error - Forbidden - No cred, dude.

I have purchased a new printer. It is the same make as my old printer. How do I remove the old printer from my Mac?

I have purchased a new printer. It is the same make as my old printer. How do I remove the old printer from my Mac?

you could see if that make of printer has an uninstaller (may come with the installer)
or go to preferences, print and fax, and press the minus key ( - ) which should maybe remove it. Or ,do a a find, then type in the make of printer, and anything that looks like a printer driver for that make, well, maybe it's gotta go
just an idea
John B

How do I make a 20 X 30 print with layers of 16 X 20, 12 X 18, 11 X 14, 8 X 12, 8 X 10, 5 X 7 and 4 X 6 of the same image to display the different sizes available to someone? Using Elements 13 with Windows 8.1

How do I make a 20 X 30 print with layers of 16 X 20, 12 X 18, 11 X 14, 8 X 12, 8 X 10, 5 X 7 and 4 X 6 of the same image to display the different sizes available to someone? Using Elements 13 with Windows 8.1
A senior citizen needs some help.
Thanks

Saving each image as different size - is it an option for you? I would save images with their name as: 20x30.png, 16x20.png etc etc.
Or explain whether you want these in a webpage in which case only one image is necessary and different sizes are displayed with good CSS code. this is question for Dreamweaver forum if this is what you want.

TS2972 I have the ID between computer and apple TV the same, I've changed the pasword and still cannot get the two to share. They stopped sharing a week ago. Best to simply unplug and start again?

Does anybody know why my home sharing would stop and I cannot get the Apple TV to recognise the ID or possibly the password? Nothing was changed and it stopped. Now I've done everything including new apple ID and password but it still wont connect.

Either the most recent updates to iTunes or the Apple TV have changed connectivity to one another. Review the following link as the configuration presented may not be the same as yours but the concepts are the same. Once completed, you will have connectivity back.
Solution for Apple TV 2, Xfinity router, Ethernet connection and Home Sharing

Cannot connect to Net, have done for last 12 months no problem, I have other apple products that are connecting to the same hub happily. The hub is seen and the signal is strong, it just doesn't connect. I have reset the network settings with no joy.

cannot connect to Net, have done for last 12 months no problem, I have other apple products that are connecting to the same hub happily. The hub is seen and the signal is strong, it just doesn't connect. I have reset the network settings with no joy. Any help much appreciated?

Try restarting your WiFi router by removing power to it for 30 seconds.

Omputcer has been installed with a German programme, originally programmed in English with English keyboard. The keys are the same as before but the keyboard is now programmed in German and I cannot find the way to enter @. How can I do it?

My computer has been installed with a German programme, originally programmed in English with English keyboard. The keys are the same as before but the keyboard is now programmed in German and I cannot find the way to enter @. How can I do it?

Hello r555,
Thank you for being a My Best Buy member, and thank you for visiting our forum. I am very sorry to hear that it has not always been easy for you to receive your Gamers Club Unlocked bonus when trading in games. I'll be happy to talk to you about your experience.
I get the impression you are quite familiar with the trade-in process and how the bonus is applied, and it is disappointing to hear that a store associate wouldn't attempt to complete that process. I will be sending you a private message so we can get some more specific information regarding which store you were at as well as the trade in question where you did not receive the bonus. Please watch for a message from me shortly.
Sincerely,
Mike|Social Media Specialist | Best Buy® Corporate
Private Message

Can anybody explain how to print multiple copies of different documents at the same time as at the moment I have to open each individually and press print

Can anybody explain how to print multiple copies of different documents at the same time as at the moment I have to open each individually and press print

is this a windows in bootcamp question ?

Recentley printing most documents in firefox print on 1/4 of the page and not the complte document. When I print the same thing in safari it prints fine. Please advise how I can get proper printing in firefox

When using Firefox to print most documents ( boarding passes, mastercard statements,genealogy documents) the printing only shows on 1/4 of the page, is in the lower left quarter and does not print part of the right side of the information. When I go into Safari and print the same documents within 2 minutes they always print fine. We like Firefox and would prefer to continue to use but if we can't print we will have to use Safari more often

I have the same problem with cutting of the page since installing the new version. If you manually zoom out the print it only shows 1/4 of the page on a whole page of paper. Something is wrong here.
I have done all these steps and it still does NOT print correctly!
I am a IT professional and something is not right with the new firefox browser. Please supply with fix or we will have to permanently switch back to Internet Explorer, which works perfectly.

My IPhone stopped working right after I did the most current update, yesterday. The screen has a picture of the usb cord, pointing towards the ITunes logo. I cannot use the phone at all. I have tried turning it off and on.ITunes won't recognize device

Hi there,
Can someone please help. My IPhoneS stopped working right after I did the latest update which was yesterday. Now, the phone does not work at all. When turned on, the screen shows a picture of USB cable pointing to the ITunes logo. I have tried just about everything, and cannot get it working. It's like it is frozon. My ITunes does not recognize my device. Cannot dial out either. I desperately need to get it working. Can someone please help me.
Thanking you in advance for your help. :-)

The update did not do anything.
AT&T cannot and will not do anything, they do not provide support for iPhones, Apple does.
The issue is not with the iPhone or iOS if you've reset network settings and tried forgetting the Wi-Fi Network, it is specific to the network.
Check the settings on the router, try disabling the security settings first... that will clarify the issue is not with the device but rather the Network.

I have a 27" desktop mac running with OSX 10.6.8. The bluetooth keyboard started not typing when some of the keys are pressed. Plugged in a wired keyboard, started doing the same thing. Now the cursor moves but cannot select anything. Suggestions?

I have a 27" desktop mac running with OSX 10.6.8. The bluetooth keyboard started not typing when some of the keys are pressed. Plugged in a wired keyboard, started doing the same thing. When opening up a browser or application, the cursor moves but cannot select anything. Suggestions?

Maybe something in these Apple support articles will help.
Keyboard Doesn’t Work
Keyboard Keys Do Not Respond
Keyboard/Mouse – Troubleshooting Wireless

Machine connected to Extreme Base Statiom via ethernet wont print

My wireless network works really well exccept that the one Imac connected via Ethernet cable to the Extreme Base Station will not print on the
printer connected to the Base Station USB port, but can
see the Internet etc. All the wireless clients, of all types can print to printer etc.
A Colleague of mine also has exactly the same problem on his network.
Does anyone know how to solve this problem?

David, Welcome to the discussion area!
What version of the Mac OS is the iMac running?

P1102w 'unable to communicate with any wireless router or access point using the provided SSID

For more than a 1 1/2 years I have been able to print wirelessly. Prior to getting all set up, I was getting this message and had difficulty with the setup. At that time I was under warrantly, I was able to get help from HP. However, it took techs a very long time to figure out why I was receiving this message. I somewhat recall doing something in the control panel and checking the SSID and password.
I recently received a new wireless router and now my printer does not work wirelessy. I can't figure it out!!
Anyone having the same probelm?

Replacing your wireless router try here.
http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

When i ask my macbook air to print it tells me it is looking for my printer it takes several minutes before it finds it and then prints, why is that as my wife is connected to the same printer in the same way (bluetooth) and hers prints straight away

As per my question, when i ask it to print it tells me it is looking for my printer this takes several minutes before it prints. my wife is in the same room using an imac also using a bluetooth connection to the same printer and hers prints immediately. why is this.

Perhaps you could try this to resolve your issue:
*How to Reset the Printing System*
1. Open System Preferences > Print & Fax
2. Move your mouse over the Printers list
3. Hold down the Control button and click the mouse (or right click if supported).
4. Click "Reset printing system ..."
5. Restart your Mac
This will remove your print queues but not your printer drivers. So you will only need to add your print queues again.

I cannot print to a p1102w if i am on a machine connected to the same access point as the printer..

Similar Messages

Maybe you are looking for